Creating Acid House Basslines with the Social Entropy Engine Sequencer + MB-33 Retro Synthesizer

Published on Oct 20, 2018 Acid Alex

"Here I am using the Social Entropy MIDI Sequencer to program some acid basslines with the MB-33 Retro synthesizer, Started off by recording an arp pattern and then adding accents and slides, then experimented with pattern direction and length as well as the Engines random functions."

Grendel DC-2e Drone Commander 2 Standalone

Published on Oct 19, 2018 EA78751

"The Grendel DC-2e Drone Commander 2 ... in its own custom fitted Euro case! The 35HP case features a removable lid for protection, and the tolex covering comes in orange, black, and more color options. From rarewaves.net"

Monotribe as quirky lead mono synth

Published on Oct 19, 2018 Mark Pigott

Stock Monotribe + MIDI
Drums via Tom Cat and Tama TS-206 analogue drums
Bass by Blofeld keyboard

Roland TR707 Factory Preset Patterns

Published on Oct 19, 2018 synthartist69

"These are all the factory preset patterns of the Roland TR707. There are 4 banks of 16 patterns. The following procedure can be used to clear the internal memory and reload the factory settings: Power on while holding down the TRACK WRITE and TRACK #1 buttons."

DISCOTAKT// Digitakt, Juno-106, DX-7, TR-808

Published on Oct 19, 2018 MR TUNA Music

"Shawn came over and we jammed. It's what I like to do best."

Black Corporation Deckard's Dream 2018

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Fresh rev 1 diy pro build by a friend who actually built some of the pre built boards for Roman while he was in Japan for a couple months."

CLICK FOR MORE »

Baldwin Syntha-Sound 37-Key Monophonic Analog Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Baldwin Syntha Sound for parts or repair. The sliders need to be replaced on this synth, some of them are completely broken, others are just very stiff or frozen. Currently it does make sound, only the "flutes" presets and they can be intermittent. The spring reverb appears to be working when played through the internal speakers with the flutes preset.

This synth likely needs alot of work, but it is incredibly rare."

Novation // Beats and Bytes - Introduction to SL MkIII

Starts at 2:53.

'We will be demonstrating the features and answering your questions live about the new Novation SL MkIII keyboard controller."

Dark Arcade – a Low Cost Paraphonic Synthesizer Module

Published on Oct 15, 2018 the.room.dis.connect

Currently seeking funding on Kickstarter.

"Dark Arcade is a $120 paraphonic synthesizer with digital oscillators and an analog filter, amplifier, envelope generator, and LFO.

What is Dark Arcade?

Dark Arcade is intended to be an entry level hardware synthesizer for musicians looking to branch out from software synthesizer based workflows, as well as a distinctive addition to any hardware synthesizer collection. Its hardware features microcontroller-produced digital oscillators, an analog OTA band-pass and low-pass filter, an analog OTA amplifier, an analog ADSR envelope generator, an analog LFO, and MIDI input and output. External audio can be processed by the filter and amplifier section and external CV signals can be used to control the filter cutoff and amplifier gain. In addition to the hardware features, the software extends the feature list to include 4 voices of paraphony, 8-bit Karplus Strong synthesis, waveform blending, and many more. Below is a song produced with Dark Arcade in which all sounds (minus drums) are generated by Dark Arcade and then mixed with some basic effects (delay, reverb, and compression).

What features does Dark Arcade have?

CLICK FOR MORE »

CGS36 Pulse Divider / Boolean Logic module - AND Demo

Published on Oct 19, 2018 Lower West Side Studio

"Lower West Side Studio presents a quick and dirty demonstration in the use of the AND boolean logic feature of the Cat Girl Synthesizers CGS36 Pulse Divider / Boolean Logic module.

This example uses constant clock input on one AND input and a gate triggered by a MIDI keyboard on the second input. This is done to activate envelope generators on a keypress so the patch will play when desired"