Sequential Circuit P600 unheard Megadrone. sounds

Published on Mar 7, 2020 SYNTHGURU *

"Sequential Circuits Prophet 600 Megadrone,
sounds from a classic polysynth.Headphone suggested"

KERMIT MKIII : AUDIO DEMO

Published on Mar 7, 2020 Robotopsy Robotopsy

"Audio demo of the Kermit MKIII from Industrial Music Electronics.
Every sound source comes from the Kermit MKIII only...... well except the Kick drum in the first patch that comes from the HDMKIII.

Patch:01
Main Tempo from DC1 Drumcomputer from Soundmachines
All Kermit MKIII's output channels goes to two Bionic Lester MKIII before going to Two Double andore MKII's VCA Audio input
Constant Kick with the Hertz Donut MKIII triggered by the DC1
Kermit MKIII's Preset CV is in trig random mode so each trig generates a random patch of the unit.
Bionic Lesters MKIII are also in Trig Random mode
Sequencing with Stillson Hammer MKII + Pressurepoints + Z8000

Patch:02
Kermit MKIII's preset CV and attenuater are in Morph
Each channels of the Kermit goes to Bionic Lester MKIII before going to the Evin 209 Matrix mixer.
2 mix of the Evin goes to the Tyme Sefari MKII for droning
1 mix goes to the Bionic Lester v1 for optimum bass booster and aliasing madness before going to the optomix for Kick Bass.
The last mix of the Evin goes to the Polyvok Filter ( VCF ) before going to the DAMKII for some click percussions.
Reverbs - EQ - Compressor - Filters with Ableton LIVE

Patch:03
Kermit Channel A for Audio
Kermit Channel B as envelope assigned to the Amplitude of channel A to act as VCA Env combo
Kermit Channel C modulate waveform of channel A
Kermit Channel D modulate the waveform of channel B
Stillson Hammer MKII for Sequencing Kermit's channel A and B
Kermit's channel A output is splitted to the Bionic Lester MKIII A input before the Tyme Sefari MKII then the Tyme Sefari MKII's output back to the Bionic Lester MKIII B input.
Using Stillson Hammer v1's gates to the A Sound Of Thunder and Bionic Lester MKIII's CV inputs.

I'll explain the lasts patch later I got to pee.........."

Arp Odyssey: "Busy City"

Published on Mar 7, 2020

"Short piece (MIDI) on the Arp. Full duophony. I recorded the full work 3 times: once as seen on the video, and two more times with the filter in a fixed position. Two other recordings were made: just the bass, and just the upper.

PS recording a work twice through is very common with synth recordings i.e once with the filter fixed for a strong bass, and the primary take with filter sweeps etc. It is especially common on synths where filter/resonance removes bass content (i.e the fixed filter recording maintains bass presence).

Best
Kris"

Gone In A Day

Published on Mar 7, 2020 davidryle

"I had some fun with INSTRUo Harmonaig and a few select 5U modules.

The modulation to the Harmonaig (Inversion and Voicing) was with a pair of STG Soundlabs Voltage Mini Store modules.

The main transpose sequence was from a Mini Sequencer built by Synthetic Sound Labs.

The pattern gate selection and VMS stepping were done with the STG Time Divider.

Some magic mojo was stirred in with the selection of dotted notes against straight notes. The Trigger Sequencer was the Moon Modular 563. It sent gate timings to the four voices run through the SSL Octal VCA and AD/AR Expander.

The four oscillators were a Mos Lab 901 bank, DDVCO, SSL 1200 and Q106.

Filters included Yusynth Arp 4072, Dotcom Q107 in high pass mode and Mos Lab 904-A.

The final reverb is the Z-DSP from TipTop Audio with a 'Halls of Valhalla' card."

Jam with Roland VP-03, Digitone, Digitakt, Roland SH-01A

Published on Mar 7, 2020 Ian R

"A little jam with some digital friends. Got the VP-03 back out for some strings and choir sounds, I'm always glad I held on to it. Enjoy and thanks for watching!"

Improv #15 (Sleepers Awake!) for VCS3, Arp 2600, Moog Voyager, Mellotrons and Singing Bowls.

Published on Mar 7, 2020 R. Reger

"Improvised soundscape for mostly analogue instruments."

Minimalist Modular Update + Model:Cycles Jam // Loquelic Iteritas Percido Overview

Published on Mar 7, 2020 Ricky Tinez

"Minimal Modular system can be a pain to build. Luckily some modules help you out! The Loquelic is an amazing Eurorack modular Voice that has a built-in Envelope and VCA. Feature packed in a relatively small size is perfect."

https://www.noiseengineering.us/

Pico Patch : Episode 1 - Intergalactic Warfare

Published on Mar 6, 2020 Synth Diy Guy

"First installment of my new series on patching strategies for the Erica Synths Pico System 3! This thing is so much fun I decided to do a whole series rather than a single video :)"

Altura Mk 2 - Building the full kit!

Published on Mar 6, 2020 Synth Diy Guy

"Building the electronics and the acrylic case for the Zeppelin Design Labs Altura MK2, A sonar based theremin style MIDI controller!"

Update:

Altura MK2 Demo - 5 layer gestural improvisation

Published on Mar 9, 2020 Synth Diy Gu

"This is my demo for the Altura MK2 by Zeppelin Design labs! So much fun controlling my modular with hand gestures. I even made a whole piece using it :)"

SUPERBOOTH20 - April 23.-25. 2020 - Berlin

Published on Mar 7, 2020 Superbooth Official

https://superbooth.com

"SUPERBOOTH20 is the fifth edition of the international music and culture fair for electronic musical instruments taking place in FEZ Berlin. Exhibitors from all over the world will get together with artists, users, distributors, media partners and everyone who is interested.
__________________

SchneidersLaden presents SUPERBOOTH20"