DS-10で呪怨

YouTube via CardiacTrance. via the KORG DS-10 blog.
"Making "The Grudge" Noise using Korg DS-10.
初投稿です。
参考ページ：
http://ascii.jp/elem/191370/index-5.html

呪怨っぽい音を出してみました。
素で出るのは恥ずかしいのでコスプレです。（もっと恥ずかしい！？）
設定：
VCO：ノコギリ波。ピッチは最低にします。
VCA：DRIVEの値を最大近くまで上げてください。
モジュレーション：EGからVCA INで音量を上げます。DS本体の音量もMAXにしてください。
MIXER：パンを完全に左側（右スピーカーを使いたいなら右側）にします。
ここでも音量をMAXにします。

カオスモードで左上の端辺りを押さえて、カツカツ言わせます。
スピーカーに上手く口を当てると呪怨っぽくなります。声を出したり
息を吹き込む必要はありません。
後はカオスパッドを弄ったり、口の形や舌の位置を変えて音を調節してみてください。"
Googlish:
"Making "The Grudge" Noise using Korg DS-10.
From the first time.
Reference page:
http://ascii.jp/elem/191370/index-5.html

Juon looked like a sound out.
Since the embarrassing element of the cosplay Take. (More embarrassing?)
Setting:
VCO: saw the waves. Pitch to a minimum.
VCA: DRIVE-up to close to the value of the maximum, please.
Modulation: EG VCA IN from the increase in the volume. MAX to DS console and the volume please.
MIXER: full of bread left (right if you want to use the right speaker).
MAX, but the volume here.

All around the edge of chaos mode, hold the upper left corner, said katsu pork cutlet.
Speaker hit in the mouth and Juon well-ish. Or out
You do not need to breathe life into.
弄っchaos after the pad, or the shape of the mouth and tongue to change the location of the sound, please try to adjust."

FIRST PRODUCTION MATTSON MINI MODULAR 07A-0001 SYNTHESIZER

FIRST PRODUCTION MATTSON MINI MODULAR 07A-0001 SYNTHESIZER from RED MARTIAN on Vimeo.

"Here is the first production model Mattson Mini Modular analogue synthesizer serial number 07A-0001.
All sounds in this recording were produced on the MMM using the production run modules.
The percussion sounds were sampled and arranged on an Akai MPC-1000. The bass line was sequenced in Logic and the saw leads were recorded as performed.
The bass and lead sounds are produced using three oscillators in tune with various setting differences. The Jim Patchell filter is run with both LP and BP outputs run into stereo VCAs.
The only effect used is reverb from a t.c. electronic M-One."

MAKE presents: The Resistor

MAKE presents: The Resistor from make magazine on Vimeo.
"Simple, commonplace and absolutely vital to our electronic world - take a closer look at the current-fighting backbone of circuitry, the resistor!"
via C. spot the synth.

Nanospheres and Tunnel Vision

Nanospheres from Hans-Jörg Scheffler on Vimeo.
"The Artmatic engine is capable of producing stunning fractals.
Here are a few examples.
I arranged them in V-Track and added some music composed in Logic8 on my Macpro using only Spectrasonics Omnisphere for all the sounds including the percussion.
This features one of the boys choir phrases named Kyrie."


Tunnel Vision from Hans-Jörg Scheffler on Vimeo.
"This is a clip that shows Omnisphere in a more trance like setting.
It is also a tribute to all the people in the Spectrasonics development team that made this wonderful softsynth possible.
They are all mentioned in the splash screen in the final scene!
Thank you very much indeed!

I rendered the video in Artmatics V-Track and composed the music in Logic 8 on my Macpro.
All the sounds including the drums are coming from Omnisphere!"

Also see Under a foreign sky.

Livid Instruments Ohm Manufacturing

Livid Instruments Ohm Manufacturing from Livid Instruments on Vimeo.
"Manufacturing the Livid Ohm MIDI control surface by Livid Instruments. This controller is made and designed in our Austin manufacturing shop Livid Industry. Edit by Jason Senk."

eventide h910

flickr set by janvanvolt
(click for more)

"harmonizer + delay. simply a neat special effects unit.
--> robot voice, etc."

inside an eventide h910

muzik4machines's D3adM0uch3 - Live December 09, 2008, 05:47 PM

YouTube via muzik4machines
"Korg ESX1: All Sequences/Drums
Yamaha TX81z: Reverby/Pumpy Sawtooth Bass (chain:TX81z-Akai MFC42-Alesis Nanoverb-DBX266 ch1 (pump)-ch2 (Compression)-Mixer)
Roland MKS50: Hoover/Saw/Lead/Pumpy Synth (Chain MKS50-Boss SL20-DBX266-Zoom RFX2200-Mixer)
Redsound SoundBite Pro: Vocals/looping
Korg Kaoss pad 2: Tempo Delay
Korg Kaoss Pad 3: Loops, Looper(snare rolls), Grainshifter
Korg Kaossilator: Noise Sweeps (path: K01-Mini KP(Delay)-Mixer)
Korg ER1: Beatbox AND sidechain signal (Chain: left out-ProCo Turbo Rat-Boss V-Wha-Mixer)
DX200: Fm E-piano, pads, 303-esque sequences, etc (Chain: Left Out-Boss DD5 delay-Mixer)
Motu Midi Mixer 7s: My mixer, controlled by the BCF2000)
Kawai Midi Patchbay:Guess
DBX MC 6: Output Compressor

NOT used:
a computer, besides recording it; no edition, no mastering, What you hear is what I send out of the main outs

muzik4machines's QuickCapture Video - December 09, 2008, 05:47 PM"

Pro-12 Four Octave

Some new photoshopped Pro-12s are up on PRO 12. I kind of like this one.

follow-up to this post.

Some Notes on the Cheetah MS6

Just some interesting notes from the AH list:

via Giles Ward:
"I've got an MS6 and a Matrix 1000 and they are pretty similar. I've got the Maad OS in there, that works really well (http://www.maad.net/ms6/index.html)

There are a few subtle differences between the MS6 and the Oberheim.

- No filter FM on the MS6
- The MS6 has its LFOs shared between multiple voices instead of 1 per voice
- MS6 envelopes are linear slope
- No matrix modulation on the MS6
- Less modulation on the MS6 seems to make it a wee bit snappier
- MS6 is multitimbral
- MS6 can be front panel edited but it's slow, best to use the CCs the Maad OS provides
- MS6 looks even more like a rack-mount clock-radio

Some great mp3 demos of the MS6 here:

http://www.synthmania.com/ms6.htm

I'd say it's great for strings and pads. Makes a change from low-end Roland synths which rely on the chorus. Could be considered as a bargain Prophet 08 (same chips but less voices, knobs and modulation)."

via Chris Strellis:
"Whilst we are on the subject, the Oberheim Matrix 1000 and MS6 both use the Curtis CEM3396 uP Controllable Dual Waveform Converter / Processor

..and so does the Elka EM22 and EK22:

http://www.xs4all.nl/~awolfe/studioElkaEK22.htm

I have an EM22 and it's an OK analog with a few surprises in its sonic
arsenal - again an underrated synth.

Here's some demos of my one with reverb and echo added.

http://www.strellis.com/Download/90_91_92.mp3
http://www.strellis.com/Download/Echolalia.mp3
http://www.strellis.com/Download/Wavemerge.mp3"

MiniMoog Model D

"MiniMoog Model D - SN6101
Custom Modifications
4 Additional internal patch points were added to the moog to allow oscillator 2 & 3 pitch to track the filter section ADSR contour and to sync to oscillator 1 frequency. This makes it possible to do classic sync effects like those introduced by the Cars. The two switches on the top left, sync oscillator 2 & 3 to oscillator 1, and the switches next to OSC 2 & 3, add pitch Control Voltage from the Modulation
Filter section."

more images here
via Niall

Update: the images actually came from a listing of this Mini for sale. I needed to clear whether I could include that in the post. I can. Details:
$3500 + shipping/Paypal fees
contact philg at cgrafx if interested
it's a .com address