MATRIXSYNTH


Sunday, March 11, 2012

Minimoog #4766 Demo


YouTube Uploaded by davidbarnhart on Mar 11, 2012

"Showing some of the classic analog sounds of an early-era Minimoog synthesizer"

via this auction

"Beautiful, fully-working Moog Model D Minimoog. This thing sounds amazing. It contains the much sought-after "old oscillator" boards, considered by many to be beefier than those found in the later Minimoogs. The envelopes are snappy and punchy, the oscillators are thick and luscious, and the filter is 100% genuine Moog. No other compliments or descriptions needed on that last one.

The keyboard mechanism has been freshly serviced and feels brand new. Two common problems happen to classic 70's keyboards (whether Moog, Oberheim, Sequential, Arp, etc). First, the contacts get dirty with dust and years of grime, leading to squirrelly pitch fluctuations, inconsistent notes and generally a very unsatisfying playing experience. Second, small rubber pads inside many of the classics are beginning to dry up, deteriorate and fall apart. The keys develop a loud clapping sound and begin to feel clunky in a cheap way. In extreme cases, the rubber falls out of place and the vertical height of the keys are uneven. Luckily, the keyboard mechanism on this Minimoog has been serviced to avoid both problems. All contacts have been carefully cleaned, and the rubber bushings have all been replaced with new ones. This keyboard plays like it just rolled out of the Moog factory in New York.

The serial on this synth is 4766, and it was built in May, 1974 (see the picture of the assembler/inspector initials inside the case) when Moog was operating out of Williamsville, New York. Moog made three revisions to their oscillator boards over the years. The first version was highly unstable but considered to give the thickest sound. They quickly redesigned and created a much more stable board that wasn't nearly as affected by temperature/humidity. Toward the late 70s, Bob Moog made the final redesign, bringing even more stability to the board. Unfortunately, the general feeling is that this last revision has the least preferable oscillator sound. This synth received the second revision, which is the best compromise between stability while still retaining that monster Minimoog sound."

Roland JX-8P Polyphonic Analog Synthesizer


via this auction

In the hall of the having fun


YouTube Uploaded by tuddilu on Mar 11, 2012

"The Hall of the mountain king kong on MiniKorg 700s and ARP AXXE."

Dataline - Broken...Machinedrum + OP-1 performance


YouTube Uploaded by MrDataline on Mar 11, 2012

"Facebook Fan Page; http://www.facebook.com/Project.Dataline

Soundcloud Page; http://www.soundcloud.com/dataline

OP1 processed by Machinedrum. Some of the tracks on OP1 are hard panned left and right so the tracks could be processed individually on the Machinedrum."

Synth Pylon


YouTube Uploaded by Ebotronix on Mar 11, 2012

"4ms Peg RCD VCAMatrix
Analogue Systems RS 100 RS 110 RS 360
Arp 2821 Pink Noise
Doepfer A 134 pan by Moog MP 201
Flame 2x Chord Machine
Make Noise Brains 2x PP Maths Moddenix QMMG Wogglebug
Malekko 4x Unkle 4x Anti
Oberheim Sem
Ringmodulator Anti& Unkle to 2x Moddemix
Roland System 104 Sequencer
Toppobrillo Sportmodulator
Master Clock Logic via Kenton Pro 2000II and 2x 4ms RCD
Drums Logic Ultrabeat"

It knows not what it is

It knows not what it is from Lyonel on Vimeo.


Buchla real-time improvisation ; Strings, electric-piano and guitar overdubs.

via Greg Cole on The MATRIXSYNTH Lounge

Control Core Jam


YouTube Uploaded by crudface on Mar 11, 2012

KORG Monotribe, Eurorack Modular & NES controller to CV interface.

Solder Paste, Toaster Oven, Homemade Vacuum Pickup Reflow Demo


YouTube Uploaded by CuriousInventor on Mar 11, 2012

"A quick overview of how to use solder paste, a stencil, an inexpensive vacuum pick up tool, and toaster oven to do assembly."

Monophonic After-touch Key Pressure Sensor Kit For Pratt-Read Keyboards

SCI Pro-One Aftertouch

YouTube Uploaded by FeedingTimer on Mar 10, 2012

via this auction
"You are looking at a monophonic After-Touch Key Pressure Sensor Kit designed for install into generic Pratt-Read keyboard actions used in vintage analog keyboard music synthesizers produced by manufactures such as ARP, OBERHEIM, MOOG and SEQUENTIAL CIRCUITS. This product is designed to replace the Modulation Wheel function. You won't need or want a modulation wheel once you've tried this product! Available in standard 37 key action. 49 and 61 key actions available for an additional $40 and $80 dollars respectively...

Center underneath the front of the keyboard as shown in the photos, peel and stick into place. Replace the 3 Modulation Wheel electrical connections with the 3 AfterTouch Sensor connections. Dry fit it first a couple times. You will likely need to carefully adjust the metal tabs to even out key actuation. Generally the metal tabs of the black keys may need to be lowered for even key-key actuation results. See key actuation photos. All Pratt-Read Keyboard applications may not be the same, there may be some mechanical adjustments required for your specific installation. Keyboard electrical connections may also vary from synthesizer to synthesizer so you may have to adjust for that as well. Please refer to the schematic and photos to determine suitability for your specific application!"

Rare WEM HAND-FULL


via this auction

"This is an Ultra Rare Synth Model From WEM / Watkins electric Music Limited The serial No. is 00036 and I've not been able to ascertain how many where ever made. There is hardly mention of them on the internet but for a clip from an old Brochure. And the Effect makes an appearance on the cover artwork of Pink Floyds Ummagumma Album link

There is an Adjustable Strap which holds the box n your hand your fingers then have control of the 4 buttons on the top which Generate four Very Deep Sub Bass tones Combining the Buttons in different Orders Produces Variations of notes. Next there is the BASS Dial which controls the Volume of these tones The RAVE dial acts both as the On/Off Switch and Over all Volume for the rest of the Effects

PERCUSSION
These four Buttons each emit a short Mid range tone Something like and 808 Conga Sound only sharper

FREAKOUT
1 hi pitch Oscillation / 2 White Noise / 3 Long siren That descends and ascends on removal / 4 Shorter Siren Like Sound

PSYCHEDELIA
1 hi piercing Sound / 2 sounds Like a bee / 3 Hi Mid Oscillation / 4 Another Variation on Oscillation pressing various buttons together or holding one down whilst you play others produces variations of effects and Analog Sound to my ears it's not that removed from something you'd expect of Arp Synths of that Era lots of Sharp sounds

Inside the Box each Button is attached to it's own very Dense Circuit board each button is it's own tone generator, there is allot of Circuit inside!

When i got this not all the Buttons where working and i soldered a few wires that had come loose and gave it a good spray of circuit Cleaner. I also replaced the output Cable as the old one had deteriorated. The New Cable has a female 1/4 Jack on it so you can extend the reach of the box. I did not do anything else to it apart from installing fresh batteries.

The Wem Hand-full is powered by an old style A136 9.0V Alkaline battery One of which i've placed in the photo so you have an idea. These are available from this supplier http://www.smallbattery.company.org.uk It is quite Possible that you could wire in the adapter for a modern 9v Battery i did not do this as i wanted to keep the box as untouched as possible There is one batteries inside the machine now but it's running low!"

PREVIOUS PAGE NEXT PAGE HOME



Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH