flickr set By Nicoo DIY
(click for more)
"Anushri is the new mono alog synth from
mutable-instruments.net and it's rule!!"
I'm not seeing any additional info on Mutable Instruments at the time of this post.
Update via via Renegade Rhythms in the comments. via
Mutable Instruments:
"Mutable Instruments Anushri – a cheerful analog synth (that doesn’t suck at drums too)
Analog synthesis
Analog VCO with saw and pulse waveforms, freely mixable.
Optional automatic VCO calibration in software for those who don’t like messing with trimmers.
-1 or -2 octaves sub-oscillator.
Auxiliary square oscillator (DCO) with accurate digital tuning. Can be mixed in the audio path, used as a FM modulator or as a sync master for the VCO (yes, it means “ewwwwwwiowwww” and “wongwong”).
12dB/octave multimode filter, with smooth self-oscillation.
Post-filter overdrive/fuzz circuit.
Linear VCA.
Modulation sources
1 main ADSR envelope routable to pitch, pulse width, cutoff frequency.
1 simple 1-parameter envelope (morphing through various stages, including the shape of the main ADSR, and a rigid “GATE” style envelope) routed to VCA.
Velocity routed to either cutoff frequency or VCA gain.
1 LFO routable to pitch, pulse-width and cutoff frequency ; with 8 waveforms (triangle, square, ascending and descending ramps, S&H, bernouilli process, piecewise linear random process aka “autodubstep”, noise).
1 triangle LFO for vibrato and/or growl.
Arpeggiator and sequencer
Arpeggiator with 4 modes (up, down, up&down, random) ; 1 to 2 octaves ; 6 patterns.
SH-101-style note sequencer with step by step recording, up to 128 notes. Easy recording of pauses, ties, and glides.
Tempo set by internal clock with shuffle, external MIDI clock or external 6/12/24 ppqn trigger.
Drum machine
Algorithmic drum pattern generator using an innovative “pattern sculpting” approach – allowing a large combination of drum patterns to be sculpted from 5 knobs.
Digital sound generation of BD / SD / HH with tone control.
Drum sounds can be freely triggered from an external sequencer using MIDI channel 10.
Interface
10 pots and 4 switches for hands-on access to synthesis parameters.
10 “software-pots” for editing modulations / arpeggiator / drum machine settings.
3 dedicated navigation buttons (“modulations”, “arpeggiator / keyboard”, “drum machine”).
3 dedicated sequencer buttons (“record”, “play”, “hold / rest”).
In/out
VCO CV in/out (Note: manual VCO calibration is required for accurate 1V/Oct I/O).
VCF CV in.
VCA CV in.
PWM CV in.
Gate signal in/out (5V level for output).
24, 12 or 6 ppqn clock signal in/out (5V level for output).
Front panel external audio in.
External Audio in.
Drum machine individual out (inserting a jack there removes it from the main mix).
Audio out.
MIDI in/out (thru + arpeggiator and sequencer notes).
CC control over modulations and some of the digitally controlled synthesis parameters. Some parameters like filter resonance cannot be CC-controlled.
“Eurorackable”
Remove main audio in / out and solder corresponding minijacks on PCB
Remove LT1054 and solder 2x5 power connector
Route MIDI in/out to front panel (if you want…). And that’s it!
Availability
DIY product (full kit)
Price < 200€ / kit
Available < October 2012"
