'Etos' Electribe, Volca Bass, Keys and MT25d

Published on Feb 11, 2015 Arrayzable

"The Electribe is playing a heavy bass with some midi-sequenced Volca Keys deep crunch on top. The Volca Bass is playing a high pitched sequenced loop. The microKORG XL is playing an arpeggiated pad and I'm playing the lead melody line on the MT25d and making a little 'piano'-loop on the Kaossilator on the fly.

Original track, sequenced and live play. No DAW involved. Recorded on Korg miniKP2

The 'work in progress' name of this track is 'Slow Shot' and refers to my thoughts on the Paris incident early this January: If all people where slower on the trigger (either metaphorical or actual) the world would be a different place. I named the track 'Etos' (ethos) which IMO covers my string of thoughts on the subject, and makes this the second track in my Patos, Etos, Logos track-trilogy. These three are commonly known as the means of persuasion but respectively also covers important parts of living. Here not just making something or someone seem credible, but actually be credible or maybe ethical if you will.

The video contains footage of my daily drive to work."

Make Noise René Performance and ProGraM Pages Overview

Published on Feb 11, 2015 MAKEN0ISE

"Overview of René's Performance and ProGraM pages."

The Synthesizers.com Q150 Transistor Ladder Filter

Published on Feb 11, 2015 mootbooxle

"Here is a nice demonstration of the Synthesizers.com Q150 Transistor Ladder Filter, which is based on the timeless Bob Moog 24dB/oct lowpass resonant filter design. Designed by Roger Arrick, this filter offers the classic Moog sound with some new innovations.
Read more at http://synthesizers.com/q150.html

Produced by Moot Booxlé.
Sights and sounds Copyright 2015 Moot Booxle Studios."

Synthesis Technology E350 and Audio Damage Aeverb

Published on Feb 11, 2015 darksideothetune

Stereoping Hardware Programmer for Yamaha TX81Z

Published on Feb 8, 2015 stereoping

"Demo of the Stereoping Synth Controller in '81Z' edition for Yamaha TX81Z FM synthesizer. After 30 seconds of technical info what the highly specialized midicontroller does and how to wire it up, the video shows 4 little one-minute-demos. First the famous Preset C15 "LatelyBass" is tweaked into a mellow portamento bell sound. Second demo on preset C27 'Xylophone' shows course tunings on the 4 operators to get some nice chords. Third demo on preset A17 'PercOrgan' concentrates on the 'Reverb Rate' parameter of the TX81Z and the LFO for pitch- and amplitude-modulation. The fourth part demonstrates how to automate and remote TX81Z parameters with ordinary midi control change (CC) messages, using the programmers built in CC-to-SysEx-translator. Thanks for watching :-)"

Erica Synths - Dtech VCF

Published on Feb 11, 2015 DivKidMusic

"A new filter from Erica Synths based on the Polivoks filter. It has unrivalled control with a cut off slope control and also a resonance response control. So your cut off can have a flat curve or a more steep and aggressive reduction of sound above (above in low pass, around both sides in band pass) the cut off point. With the resonance response curve you go from a flat resonance response to Polivoks. There's also resonance CV, cut off CV and a secondary CV with attenuverter and crossfader to select whether it affects resonance or cut off or both as you fade around the knob.

Hit like and subscribe for more videos coming every week and check out the Patreon link below to see how you can support my channel.

http://www.patreon.com/divkid"

Todd Barton Solo - 2015 Serge 40th Reunion Event

Published on Feb 11, 2015 djangosfire

"Todd Barton Solo performance at the SERGE 40TH REUNION EVENT - Saturday, Feb 7th 2015"

Update:

Todd Barton Inside Serge Solo

Published on Feb 13, 2015 Todd Barton

"Here’s a slightly closer look at the solo Serge performance. Sorry for flipcam distorted audio – better audio here:
http://youtu.be/BmdxM-XfDhc?list=PLgc...

The first third of the performance I’m manually working the Audio Mixer, DTG and VQVCF while looping (RC-3). The middle third is a preprogrammed sequence from the TKB using 3 oscillators and 2 DSG’s for filtering/eg – no looper from here on out. The last section is the same sequence slowed way down and I’m engaging the Eventide Space reverb. You can see the patch here courtesy of GrantB: https://www.hightail.com/download/UlR..."

Synthrotek echo test

"ah. . . a grey day here in the NW so time to solder up a little Eurorack Echo module from Synthrotek.com Way too much fun for $65!"

Malekko Richter Oscillator II, MakeNoise Wogglebug, Optimix, Maths.



"ok. . . had to try this! sending some random rate CV from the Wogglebug to the Rate in on the Synthrotek Echo kit. listen closely as the rates change. . . also see my previous post for a different style/use"

SaktiNada

Published on Feb 11, 2015 VoltageCtrlRtv

"Sakti is the energy of the cosmos that maintains the universe and also makes it disintegrate.
Nada is sound, vibration, the universal pulse of life.
Sakti Nada is the union of the powerful energy of the Goddess expressed through vibration."

Welson Syntex Synthesizer Presets and more Demo

Published on Feb 11, 2015 Sergio Brunetti

"This is a DEMO of the 15 presets of this powerful Italian vintage synth. At the end of the video we have fun changing the VCO, VCF VCA and portamento controls. At the very end the Random Music push button is pressed, a sort of Sample and Hold. No effect is used and only the raw signal has been recorded. Obviously with some delay, reverb, compression the already good tones of the instrument can improve dramatically. Thanks to Claudio Laucci who has helped me in finding and playing some of the melodies and the rest."