Monday, May 18, 2015
Details on the InsWorks Esencial
Video previously posted here.
The following are details in via InsWorks:
"The Esencial is a analog modular synth with 18, 3.5 mm plugs, 5 modules
VCO
V/OCT with Tune in, Fine tune in, Sync in, FM in, Lin FM, Saw out, Pulse out
VCF
Low Pass with control for Cutoff, resonance and level, audio in, cv in, audio out
ADSR
Control for Attack, Decay, Sustain and Release, Gate in, CV out
VCA
2 Audio ins and 2 CV ins
Noise
with audio out
The power supply is a dual 15+/15- 1 ampere 120 AC in"
See dealers on the right for pricing and availability on gear.
LABELS/MORE: InsWorks, New, New in 2015, New Modules, New Modules in 2015, Video
LABELS/MORE: InsWorks, New, New in 2015, New Modules, New Modules in 2015, Video
EII ENSONIQ ESQ1 SAW DELIGHTS
Published on May 18, 2015 synths colors
"EMULATOR II...ENSONIQ ESQ1 SAW PAD... & FREE SAMPLING SESSION !"
K2000 VP Part 2: Programming
Published on May 18, 2015 geerefamilyusa
"Synth veteran Richard Geere with part 2 of his K2000 VP demo - programming overview & tips."
Part 1 here.
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Kurzweil, synth tutorials, Video
LABELS/MORE: Kurzweil, synth tutorials, Video
OBERHEIM-OBSX MIDI-CONTROL
via midisoft.de. These are also available on eBay here.
Update: video here.
"A plug & Play MIDI-Interface for The OBSX 37Pin COMPUTER PORT.
This interface transforms your OBSX into a fully editable Synthesizer.
All parameters are editable in Real Time via MIDI controller change message.
A ready to go SysEx setup file for The Beringer BCR2000 is included here.
The price excl. shipment is 298,- €
MIDI CONTROL CHANGE TABLE:
AniModule system patch "Wind Park"
Published on May 18, 2015 SGE
http://www.animodule.com
"A hip hop type downtempo beat. This patch uses the CFM wave rectifier. Two LMVCO's are being sequenced by a Tiktok and Mixman then blended together with the rectifier. All sounds from the box. Effects are a Meet Maude delay and Roland RE-20 pedals."
Buchla Easel Switches
Published on May 18, 2015 Todd Barton
"Exploring the Preset Voltage Source switch . . . for better audio of a similar experiment: http://soundcloud.com/user7621213/
buchla-easel-switches"
SCI Prophet 6 - Taiho Yamada Demo
"I just completed a bank of sounds for the upcoming Sequential Circuits Prophet 6. I’m not sure how many of my sounds will make it into the factory preset banks at this point, so I’ve got my fingers crossed… Either way, I’m still very happy to have been a part of this project. The Prophet 6 is a wonderful sounding synth and a blast to program! I hope you enjoy this audio demo of my work…"
Taiho Yamada was the man behind the M-Audio Venom. He also worked on the Alesis Andromeda A6.
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Alesis, Audio, DSI, M-Audio, Sequential Circuits
LABELS/MORE: Alesis, Audio, DSI, M-Audio, Sequential Circuits
May Two-Four Synth Jam 2015
Published on May 17, 2015 stereofect
"A late night jam to wrap up a fun filled day hanging out with my family. It's a long weekend here in honour of Queen Victoria's birthday. It's also the unofficial start of of summer. The weather's fine and I'm feeling good.
Gear used:
Novation Bass Station II
Roland Alpha Juno1
Korg X5Dr
Waldorf Blofeld
Arturia Microbrute
Mopho Desktop
Yamaha AN2015 iOS Synth
Beatmaker 2 midi sequencer
Cheers!!"
Roland JD-Xi Drums Demo
Published on May 18, 2015 perfectcircuitaudio
"This video demonstrates the drum sounds of the Roland JD-Xi.
Buy a Roland JD-Xi here: http://goo.gl/PhzoWO
Audio Recorded with: PrismSound Lyra"
x0xb0x Wildberry = TB 303 Synth + Sequencer + Mods
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Video posted here.
"This x0xb0x is not just another MIDI-controlled TB-303 clone like others, this one is a full reproduction of the original Roland synthesizer, with fully functional sequencer and finally with a complete bunch of modifications. This gives you as a result the most versalite and complete x0xb0x ever built.
The sequencer can be programmed just like the original 303 plus the sokkos OS funcionalities, and can be used to control other synthesizers via Midi. 128 banks of track memory and 64 banks of pattern memory are stored in onboard EEPROM, no battery-backup needed.
It comes with a 220v 9v AC adapter and instructions manual.
ADD-ONS
.- SUB-BASS ADD-ON: This switch brings you the possibility to low the tone of the x0xb0x. As a result of this variation you can get deeper and nicer basslines from the synth.
.- ACC-PLUS ADD-ON: This switch increases the overall accent of the synth, obviously this Add-on only affects to the accented notes of the sequencer, the rest will not suffer variation.
.- FILTER LOW-END ADD-ON: This switch modifies the behaviour of the CUTOFF filter capacity, mainly lowering itself almost a degree, close to the minimum, perfect for cutting low frequencies.
.- ENV-MOD ADD-ON: This switch changes the capacity to turn the envelope modulation down, closer to zero.
.- ENV-PLUS ADD-ON: This switch increases the envelope modulation capacity around three times the original ones.
via this auction
Video posted here.
"This x0xb0x is not just another MIDI-controlled TB-303 clone like others, this one is a full reproduction of the original Roland synthesizer, with fully functional sequencer and finally with a complete bunch of modifications. This gives you as a result the most versalite and complete x0xb0x ever built.
The sequencer can be programmed just like the original 303 plus the sokkos OS funcionalities, and can be used to control other synthesizers via Midi. 128 banks of track memory and 64 banks of pattern memory are stored in onboard EEPROM, no battery-backup needed.
It comes with a 220v 9v AC adapter and instructions manual.
ADD-ONS
.- SUB-BASS ADD-ON: This switch brings you the possibility to low the tone of the x0xb0x. As a result of this variation you can get deeper and nicer basslines from the synth.
.- ACC-PLUS ADD-ON: This switch increases the overall accent of the synth, obviously this Add-on only affects to the accented notes of the sequencer, the rest will not suffer variation.
.- FILTER LOW-END ADD-ON: This switch modifies the behaviour of the CUTOFF filter capacity, mainly lowering itself almost a degree, close to the minimum, perfect for cutting low frequencies.
.- ENV-MOD ADD-ON: This switch changes the capacity to turn the envelope modulation down, closer to zero.
.- ENV-PLUS ADD-ON: This switch increases the envelope modulation capacity around three times the original ones.
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH

























