"Berlin, November 2016: SUPERBOOTH17 at FEZ-Berlin
SUPERBOOTH is the first European trade fair for electronic musical instruments. The second annual edition will be held from April 20th-22nd, 2017 at a new location, FEZ-Berlin.
At its basis, SUPERBOOTH17 remains what made the last event so special in 2016: a colourful, lively, passionate organized trade fair, with workshops for beginners and advanced users, round tables and product presentations. In addition to the exhibition stands, there will once again be around 30 daily concerts and live performances with artistic representatives of all musical genres.
In the coming year, the focus will be on the encouragement of the competence and capabilities for the next generations. The FEZ-Berlin was built as the "Pionierpalast" during the GDR time and contains various specialized designed rooms, studios, lecture and concert halls which make the FEZ an ideal venue for this purpose. In addition to a flexible event space, there is an integrated modern technical equipment, allowing ease for planning.
As opposed to last years venue, with the well-organized design of the FEZ-building and land, the paths for visitors and exhibitors are shortened, as the exhibitor areas, studios, workshop rooms and food performance court are closer together and spread barrier-free over three floors. With the rooftop restaurant, several bars and larger outdoor area, there are endless opportunities for a communicative gathering. Of course, again we will provide our culinary mile, where you can enjoy a wide range of food and drinks while listening to experimental sounds from the Sea Side Stage.
Through workshops, lectures, performances and the fair, SUPERBOOTH17 has set out the goal of providing young people and inexperienced users with specialized expertise. For this purpose, the entire lower foyer and outdoor areas will be freely accessible and offer individual workrooms, educational stands and outside facilities for meeting, eating and experiencing a high level of live performances.
Further details on the three-day program can be seen on our website and will be regularly updated until the beginning of the fair. You can also keep up to date by subscribing to our newsletter at www.superbooth.com
SchneidersLaden presents: SUPERBOOTH17
20. – 22. April 2017
FEZ Berlin, Straße zum FEZ 2, 12459 Berlin-Wuhlheide
Daily Program:
10 am - 6 pm Registered Workshops (Concert Hall 2)
10 am - 2 pm Trade Fair Exhibitors & Registered Trade Visitors (Mezzanine, 1st Floor) **
12 am - 2 pm Trade Fair Public Entry (Ground Floor, Outdoor Areas)
2 pm - 7 pm Trade Fair Open (all areas) *
12 pm - 11pm Concerts, Presentations, Evening Program * *= with valid Visitor Ticket **= only Trade Visitor Ticket
Arrival
Boat shuttle – Ex Jannowitzbrücke
Daily - 8 am (Exhibitors), 9 am (Registered Trade Visitors), 11 am, 2pm & 5pm (All participants) Daily return travel from the Yoga Hotel Essentis is available from 12:30 pm, 3:30 pm and 6:30 pm. The nightly return shuttles are at 9:30 pm and 12:00 am. (reservations recommended)
S-Bahn
Line 3 from Ostkreuz until Station Wuhlheide (direction Erkner). From the station one can enjoy a pleasant 15 minute walk or go directly onwards to the venue with the:
Pionierbahn
(at S-Bahn Station Wuhlheide) Daily 10am through 2 pm in 10 minute intervals. 2pm through 7pm every 20 min.
Superbooth Berlin GmbH / Ritterstraße 3 / D-10969 Berlin / press@superbooth.com"
Thursday, November 24, 2016
First Press Release for SUPERBOOTH17 at FEZ-Berlin
See dealers on the right for pricing and availability on gear.
LABELS/MORE: events, Superbooth, Superbooth17
LABELS/MORE: events, Superbooth, Superbooth17
DiscoverSoftware // Native Instruments - Monark
Published on Nov 24, 2016 DiscoverNoise
"DiscoverNoise 068-
DiscoverSoftware 013-
In this video we're taking a look at some of the dozens of presets from Native Instruments "Monark" plugin for Reaktor."
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Native Instruments, Soft Synths
LABELS/MORE: Native Instruments, Soft Synths
MODAL 001 Synthesizer / Sequencer / Arpeggiator With Multi CV Outs
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Up for sale is the NEWEST version of the very sweet Modal 001 Synth. It has the Black Side panels too! Very chic!"
via this auction
"Up for sale is the NEWEST version of the very sweet Modal 001 Synth. It has the Black Side panels too! Very chic!"
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Auctions, eBay, Modal Electronics, Reverb
LABELS/MORE: Auctions, eBay, Modal Electronics, Reverb
Yamaha CS-30
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Very comfortable with a strange design and architecture. The CS-30 is a large, knob infested, black analog synthesizer with some traditional features and some extraordinary features.
The flagship model with 3 envelopes (with pos and neg), 1 LFO with multiple waveforms, Ringmod, crossmod (=FM).
Has two VCF multi mode filters (BPF 6dB/oct, LPF, HPF 12dB/oct), very fast and slow envelopes. The LFO can be quite fast. The CS-30 also lets you choose the sequencer as a modulation source for VCO1, 2, both filters and it can be clocked by the LFO or by an internal clock.
The modulation routing alone is deep, one can modulate just about anything in spades. Multiple ways of modulating major sections of the synth simultaneously."
via this auction
"Very comfortable with a strange design and architecture. The CS-30 is a large, knob infested, black analog synthesizer with some traditional features and some extraordinary features.
The flagship model with 3 envelopes (with pos and neg), 1 LFO with multiple waveforms, Ringmod, crossmod (=FM).
Has two VCF multi mode filters (BPF 6dB/oct, LPF, HPF 12dB/oct), very fast and slow envelopes. The LFO can be quite fast. The CS-30 also lets you choose the sequencer as a modulation source for VCO1, 2, both filters and it can be clocked by the LFO or by an internal clock.
The modulation routing alone is deep, one can modulate just about anything in spades. Multiple ways of modulating major sections of the synth simultaneously."
Yamaha CS 30 Vintage Analog Synth with Mods
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"here is the description of the mods from the Japanese Engineer who implemented them.
It has to be the most tricked out CS 30 in the world. certainly that I've ever seen. Featuring everyone's wish list of modifications, in addition to standard features:-
About VCF serial routing mod, When you select VCF1 HP in VCF2.... Before mod, HPF signal from VCF1 goes to VCF2. After mod, You can select VCF1 mode that goes to VCF2 at VCA1 mode selector
Please try: 1) selecr VCF1 HP inVCF2 2) change the VCF1 mode selector in VCA1 and you will hear the audio change. EG and bender modulation routing cancel switches are located near KEY/SEQ switch in VCO section.
1) VCO SYNC SYNC ON/OFF switch is in VCO1 Section (VCO2 -> VCO1). And I'd like to intall two extra switches, one is to cancel PITCH BEND signal going to VCO1 and other is to cancel EG AMOUNT signal going to VCO1. These will enable you to enjoy great SYNC sweep sounds.
2) Sequencer Trigger In Your CS-30 will have additional jack (SEQ TRIG IN ) and Polarity switch on its rear panel. Everything works normally when you don't plug any cable to this jack. When you plug cable to the jack, your CS-30 is in SEQ TRIG IN mode. When the sequencer is MANUAL mode, it accepts STEP signal to proceed the step. START/STOP button works as reset button, it turns to STEP1 anytime you press it (while running or not). When the sequencer is CLOCK mode, SEQ TRIG IN works as START/STOP button, and START/STOP button works as reset button, same as in MANUAL mode.
Polarity switch is to select TRIG type. When you send Roland and most of other manufacturer's TRIG style (+V:ON/0V:OFF) turn this switch UP. When you send YAMAHA TRIG style (-V:ON/+V:OFF) or KORG style (0V:ON/+V:OFF) TRIGGER turn this switch DOWN.
3) VCF SERIAL ROUTING CS30 VCF2 has VCF1 HPF input (HPF only), but I'll unfix it and make all three mode (HPF/BPF/LPF) routable to VCF2. The VCF mode is selectable at selector switch in VCA1.
4) VCF CV IN This CS30 will have additional jack (VCF CV IN) and toggle switch (VCF destination selector, VCF1/VCF2/BOTH).
So: VCO SYNC ON/OFF switch (in VCO section) PITCH BEND to VCO1 cancel switch (near pitch bend) EG to VCO1 cancel switch (near EG selector switch) VCF CV destination select switch (rear panel, near VCF CV IN jack) Seq Trig signal poplarity switch (rear panel, near Seq Trig In jack) VCF CV IN jack (rear panel) Seq Trig In jack (rear panel)
A beautiful monophonic synth with extensive analog control and shaping.
It has two oscillators with separate outputs,
two voltage-controlled resonant filters,
two voltage-controlled amplifiers,
and three envelopes.
It also features a ring modulator, external audio triggering and 8-step sequencer."
via this auction
"here is the description of the mods from the Japanese Engineer who implemented them.It has to be the most tricked out CS 30 in the world. certainly that I've ever seen. Featuring everyone's wish list of modifications, in addition to standard features:-
About VCF serial routing mod, When you select VCF1 HP in VCF2.... Before mod, HPF signal from VCF1 goes to VCF2. After mod, You can select VCF1 mode that goes to VCF2 at VCA1 mode selector Please try: 1) selecr VCF1 HP inVCF2 2) change the VCF1 mode selector in VCA1 and you will hear the audio change. EG and bender modulation routing cancel switches are located near KEY/SEQ switch in VCO section.
1) VCO SYNC SYNC ON/OFF switch is in VCO1 Section (VCO2 -> VCO1). And I'd like to intall two extra switches, one is to cancel PITCH BEND signal going to VCO1 and other is to cancel EG AMOUNT signal going to VCO1. These will enable you to enjoy great SYNC sweep sounds.
2) Sequencer Trigger In Your CS-30 will have additional jack (SEQ TRIG IN ) and Polarity switch on its rear panel. Everything works normally when you don't plug any cable to this jack. When you plug cable to the jack, your CS-30 is in SEQ TRIG IN mode. When the sequencer is MANUAL mode, it accepts STEP signal to proceed the step. START/STOP button works as reset button, it turns to STEP1 anytime you press it (while running or not). When the sequencer is CLOCK mode, SEQ TRIG IN works as START/STOP button, and START/STOP button works as reset button, same as in MANUAL mode.
Polarity switch is to select TRIG type. When you send Roland and most of other manufacturer's TRIG style (+V:ON/0V:OFF) turn this switch UP. When you send YAMAHA TRIG style (-V:ON/+V:OFF) or KORG style (0V:ON/+V:OFF) TRIGGER turn this switch DOWN.
3) VCF SERIAL ROUTING CS30 VCF2 has VCF1 HPF input (HPF only), but I'll unfix it and make all three mode (HPF/BPF/LPF) routable to VCF2. The VCF mode is selectable at selector switch in VCA1.
4) VCF CV IN This CS30 will have additional jack (VCF CV IN) and toggle switch (VCF destination selector, VCF1/VCF2/BOTH).
So: VCO SYNC ON/OFF switch (in VCO section) PITCH BEND to VCO1 cancel switch (near pitch bend) EG to VCO1 cancel switch (near EG selector switch) VCF CV destination select switch (rear panel, near VCF CV IN jack) Seq Trig signal poplarity switch (rear panel, near Seq Trig In jack) VCF CV IN jack (rear panel) Seq Trig In jack (rear panel)
A beautiful monophonic synth with extensive analog control and shaping.
It has two oscillators with separate outputs,
two voltage-controlled resonant filters,
two voltage-controlled amplifiers,
and three envelopes.
It also features a ring modulator, external audio triggering and 8-step sequencer."
RUSH - Their first synthesizer - a MINIMOOG
Published on Nov 23, 2016 Specter Resurrected Studio
"The Minimoog is a monophonic analog synthesizer, invented by Bill Hemsath and Robert Moog. It was released in 1970 by R.A. Moog Inc. and production was stopped in 1981. But you can still get the Voyager model, they run about $3,000.00.
Rush is known for its eclectic lyrics drawing heavily on science fiction, fantasy, and philosophy. The band's musical style has changed several times over the years, from a blues-inspired hard rock beginning, later moving into progressive rock, and including a period marked by heavy use of synthesizers. RUSH first used one in the song 'Tom Sawyer', which was in 1980."
Korg Minilogue & Strymon Big Sky & EHX Flanger Hoax
Published on Nov 24, 2016 3rdStoreyChemist
"Sequence on the Minilogue synthesiser through the Big Sky reverb (Mono in, stereo out)
No further processing except normalisation."
Update:
Korg Minilogue & EHX Flanger Hoax
Published on Nov 24, 2016 3rdStoreyChemist
"Sequence on the Minilogue synthesiser through the Flanger Hoax.
No further processing except normalisation."
PPG wave 2.2 + ARP QUADRA Vintage Synthesizer Jam "Nightfly" old Berlin school style
Published on Nov 24, 2016 RetroSound
"(c) 2016 vintage synthesizer track by RetroSound
all synthesizer sounds & bass : PPG wave 2.2 Digital Wavetable Synthesizer(1982)
analog strings & phase shifter: ARP Quadra Analog Synthesizer (1978)
drums: LinnDrum (1982)
recording: multi-tracking without midi
fx: reverb and delay"
Le Comte - Kaitlyn
Published on Nov 24, 2016 LeCCComte
"Directed by Jean-Sylvain Le Gouic
"Chaleur et Mouvement" available on iTunes :
https://itunes.apple.com/fr/album/cha...
Twitter : https://twitter.com/LeCCComte
12" soon available on Les Disques Anonymes
Patrice and Louis Decourrèges thank you so much for letting us film in this wonderful place.
Shot by Gilles Pensart & Jean Sylvain Le Gouic
Grip Hugo Beaumanoir
Thanks for watching.
© Paradis Records 2016"
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Critter and Guitari, eurorack, MOOG
LABELS/MORE: Critter and Guitari, eurorack, MOOG
Autark in Dark , PPG WaveMapper
Published on Nov 24, 2016 RinghausenMusic
"Autark in Dark , Bicycle Underground Tour with PPG WaveMapper /
Field Recording
more info : http://www.wolfgangpalm.com
It has to be much louder !!"
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH


























