New 2hp Delay Eurorack Module

via 2hp

"Delay is a flexible, full-featured delay audio processor. CV over all parameters provides dynamic access to its nuanced controls. The feedback path ranges from slapback to infinity, allowing for wild permutations of the original signal.

With delay times from milliseconds to nearly two seconds, Delay is sure to find a use in every patching situation. Add subtle echo to a melodic line, or crank up the feedback and hear a bed of layered sounds to bury your listeners in.

- Full featured delay audio processor

- CV over all parameters

- Wide range of delay times from milliseconds to nearly two seconds

- Feedback path that goes to infinity"

Sequential Prophet-6 Presets 200-249

Published on Apr 17, 2017 Pure Ambient Drone

"Sequential Circuits Prophet 6 Patches, Sounds and Presets 200-249.

Part 3 of me playing the Dave Smith Instruments Prophet 6 module with no external effects. Played notes up and down to give an idea of what each patch sounds like."

Harvestman Stillson Hammer, EMW Mix Sequencer, Din Sync.info OSC 303 VCF 303 Telharmonic MFB OSC 03

Published on Mar 23, 2016 Sudo Cat

"Datagrams, Call Routing, Automated Distribution Queues

We were initially clocking the EMW Mix Sequencer from the Malekko Varigate , This Varigate was defective, later clocked the mix sequencer from the 4MS QCD."

Thonk's Musicthing Case for SUPERBOOTH17

via @thonk_synth

"The @musicthing case for @Superbooth_Bln is finished #superbooth #superbooth17"

http://www.thonk.co.uk

Sabiani - Live performance

Published on Apr 4, 2017

"Sabiani performs live his tracks from the Expanse EP:

https://www.beatport.com/release/expa...

More info:

https://soundcloud.com/sabiani
https://www.beatport.com/artist/sabia...

Contact:

info@digitalpradox.eu"

Gear used:

Bitwig Studio
Roland Aira MX-1
Korg Elecribe SX
Animoog for iPad

Minty ROLAND TR 808 RHYTHM COMPOSER DRUM MACHINE

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

One for those attending SUPERBOOTH17. Not required of course, just a temptation if you are going.

"The condition of this particular 808 is eye melting.
It feels like its been produced yesterday .
All the knobs turning with a resistance, like brand new.
I see almost no scratches at up botton left right rear whereever i look.
It comes with original overlay protection (please see photo 8th)
This will be the price of a hardcore used 808 in the next couple of months, so here is your chance to own a museum item .
I don't know if condition of it can get any better than this .

Berlin pick up and test possible."

CLICK FOR MORE »

Infused Candy | OP-1 and Modular Synth Jam

Published on Apr 17, 2017 Dusty Patches

"Patch notes

Voices:
Bass synth is Waveforms Saw into MI Ripples LP4
Detuned pad is Braids _|_|_|_|_ (a sine wave/comb filter) into Optomix
Clean pad is Disting Waveshaping VCO into Optomix
Clouds is in pitchshift/timestretch mode for granular synthesis
Bitbox loaded with drum samples in SY02 multimode filter
Lead is OP-1 in pulse synth engine with tremolo LFO

Modulation:
Ornament & Crime is in CopierMaschine mode, a cascaded analog shift register. It's sending pitch to all of the eurorack synth voices. A sequence from the Beatstep Pro is patched to CV1. The outputs are delayed and produces a cascading effect.

Peaks (with Dead Man's Catch) is in Bouncing Ball Envelope mode and modulating the Optomix. It's in split mode, or dual channel mode. Knobs 1+3 control initial velocity and gravity. Knobs 2+4 control bounce energy loss.

dlADSR generates an envelope for the Waveforms Saw bass and the Clouds granular synth. Two slow triangle LFOs are patched to Moddemix, attenuated, and patched to Braids Timbre and Disting Waveshaper. The sum of these LFOs are patched to FM on Ripples.

The Rest

Sequencing is done on the Beatstep Pro. Mixing is done with the K-Mix."

Microphonic Soundbox by LeafAudio

Published on Apr 17, 2017 TheLeafAudio

"When I started experimental music back in the 90ties, I built myself an instrument which became the trademark sound of my project and sound design work. Now we re-created this instrument as a DIY kit for our workshops. In the video clip you see the prototype and hear sounds based on this instrument. Will be available from this summer."

Noise To Brain Adapter (NTBA) - Multifunctional VCO

Published on Jul 11, 2016 TheLeafAudio

"NTBA is a multifunctional digital VCO and tool for Eurorack format modular synths and is available as a DIY kit. NTBA features 12 modes, from VCO over FM and Noise to Clock Switcher and Divider + more. Check out the mode description chart. You can download a 28 minute detailed audio guide plus pics and info here: bit.ly/297nbH2"

Missed posting this one. You can find more via the Leaf Audio label below.

Yamaha DX200 Into the FM Dimension 2017 DX7 Synthesizer Rik Marston FM-X Montage

Published on Apr 17, 2017 SynthgodXXX

"Yamaha DX200 Into the FM Dimension 2017
by Rik Marston 100% No Talking!!!
**Watch in HD!!** **Turn it UP!!!**

An extensive DEEP tweaking of the FM
synthesis engine of the Yamaha DX200
Loopfactory / Groovebox / Synthesizer.
No patterns or beats in this video folks,
just pure DX200 FM synthesis in action!!!!!
This demo shows off the FM engine and
all of it''s glossy, warm, harsh, metallic,
industrial, steampunk & ambient sound.
Way awesome if you need some sounds
that come from another world. "A.I. takes
the Earth" kinda stuff. Synthetic, artificial,
COLD, systematic, DARK, intimidating...
It sounds like that and a whole lot more...
It has some POSITIVE, clean sounds in
it also. That late '80's / early '90's sound.
Just clean & bright, MAGIC dripping off
of it. That Hollywood sound. Cinematic.
I hope you dig this video! Get one NOW!!
The DX200 is only getting more expensive
second hand on eBay & Reverb so don't wait!
The Yamaha DX200 is AWESOME!! A+++"