MATRIXSYNTH

Sequential Circuits Prophet 5 Rev 2 + Kenton Midi IN/OUT/THRU

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

*Professionally SERVICED in FULL Working order*

CLICK FOR MORE »

Vintage 1970 Systech model 4000a - Voltage Controlled Flanger SN 400331

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Elektron Sidstation

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Elektron Sidstation C64 MOS 6581 8-Bit Chiptune Synthesizer synth Sid. Condition is Used. NOTE: External power supply has been replaced with an internal one, with an IEC type power cable (included). So for better or worse this machine has been modded and pictures are provided."

CLICK FOR MORE »

Studio Electronics Omega 8 Synthesizer SN 1214

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The Omega 8 is an eight-voice, discrete, multi-timbral, stereo, multi-filtered, arpeggiated, DSP-free analogue Dream Machine.

Discrete analogue filters: 12 dB (classic Oberheim® style) firmly wired into the voice card; 24 dB (classic Moog® style) in the docking slot

+ Arp2600 x1

+ Tb 303x1

+ CS-80 x8 pack

+ Extra soundbank (89Usd)

OS: 2.5C

Original box, manual."

CLICK FOR MORE »

Important Interviews with Richard Nicol talks to Matthew Cook of WYWS in Tokyo

Published on Nov 26, 2019 Pittsburgh Modular Synthesizers

"Richard and Matthew discuss the WYWS eurorack modules and why Matthew started building eurorack modules.

WYWS Bandcamp Page - https://wyws.bandcamp.com/merch"

---

This is the first post to feature WYWS on MATRIXSYNTH. Current offerings as of this post for the archives:

WYWS MS1010 10 Step Sequencer/LFO Eurorack Module

14 hp ~30mm deep

10 Steps of CV with clear backlit knobs.
Gate out for each step.
External reset and clock inputs.
Manual Clock and Reset Switches (very helpful for programming sequences)
Clock input normalled to Square out of LFO
LFO outputs +/-5V Triangle and 5V Square

Expansion port on the back for upcoming gate combiner/reset expansion + more.

CLICK FOR MORE »

Orpho Vollrausch | Vacuum Tube VCO / Noise Generator Eurorack Module

Published on Nov 26, 2019 HOX808

"The Orpho Vollrausch generates its sound through two Russian military tubes (6SH1P)."

Google translated from Orpho:

Vollrausch | Vacuum Tube VCO / Noise Generator

The Orpho "Fullrush" is a combination of Tube-VCO and Noise Generator. It is a non-standard VCO module designed primarily as a noise generator. Two Russian military tubes (6SH1P) are used. The noise can be mixed in with a scope controller. When the noise component increases, the frequency of the oscillator varies until it is completely full. If you reduce the noise completely, the pure VCO signal is left over. Due to the "curved" characteristics of the tube oscillator, the module does not have a precisely defined control characteristic (e.g., V / octave). The inevitable tolerances of the tube oscillator will also make each module sound a little different. The tubes can also be replaced by two EF95 or similar. be exchanged, which then sound different again. By applying a control voltage to the CV input, e.g. LFO, sequencer, etc. can be varied in the usual way the sound varied.

---

This is the first Orpho post on MATRIXSYNTH.

Bastl LOL - 3x MUTE for your Eurorack

Published on Nov 26, 2019 Bastl Instruments

"LOL is a performative 3 channel passive mute module with latching push buttons, LED indication, and normalization between inputs. It is intended to be a small and low-cost mute, but it can also be used as a switched multiple.

LOL has 3 channels: O, M and G. Each channel consists of an INPUT, a MUTE BUTTON with an LED, and an OUTPUT."

Features
3 channel passive mute
latching buttons
LED indication
normalization of inputs

music by Toyota Vangelis

via Bastl

Additional posts featuring the Bastl LOL

Bastl Illuminati - visualize your music with USB Lamps

Published on Nov 26, 2019 Bastl Instruments

"Illuminati is a 2-channel USB lamp driver that takes either audio, CV or MIDI and converts it to light intensity. Mini-jack inputs serve both for CV and audio. Adjusting gain, decay and inversion achieves the desired response to the signal. With a mini switch on the back, you can set whether the inputs also respond to negative voltages. Various MIDI information can be visualised as well (note, CC, aftertouch, velocity).

music by Toyota Vangelis

Features
2x 5V USB outputs
power draw limited to 0,5 A
2x CV input
CVs are either 0 to 5V or -5 to +5V, set by a switch on the back
MIDI input
2x button for settings
5V micro USB input (power only)
enclosure with expanded base for better stability and mounting
firmware updates via MIDI

via Bastl Instruments

iVCS 3 - 50 FREE Presets by JEC - Commemorating the 50th Anniversary of the Original Synth - iPad

Published on Nov 26, 2019 The Sound Test Room

"This release is to commemorate the 50th anniversary of the Original EMS VCS3 Hardware.

Two new banks are available: 'JEC EMS-50 Bank' (free) and 'JEC 2019 Synths and Explorations' by James Edward Cosby, both banks come with new Envelope Files and are available directly from the 'Presets & Mod. Shop'"