MATRIXSYNTH


Monday, June 16, 2025

disting NT - New factory presets for firmware v1.9.0


video upload by Expert Sleepers

"Four new presets and two algorithm demos, for firmware v1.9.0.

00:01 Auto tanpura (preset demo)
01:26 Radio Musique (preset demo)
02:49 Barberpole Phaser (preset demo)
04:17 Env sequence drum (preset demo)
07:21 VCO - Pulsar (algorithm demo)
09:12 Sample Player (Sliced) (algorithm demo)"

Moog Messenger Sequence with Res Bass / Oscillator Sync / Feedback


video upload by Acid Alex

"This is a little jam I recorded with the Moog Messenger while experimenting with the Oscillator Sync, Osc 2 to Filter, Res Bass and Feedback."

Check with dealers on the right on availaiblity.

Ambient w/ volca fm2, OP-1 field | False Memory 2025-06-16 by atnr


video upload by atnr

"A piece created with the @teenageengineering OP-1 field and @KORG_INC volca fm2. Rubbing stones and bells mix with airy synth tones and fine, grain-like fragments.

OP-1 field: Records the scraped stone and bell sounds, then layers live playing on the internal synth. On NIGHTSKY, adding reverb while adjusting the filter.

volca fm2: Runs a simple sequence; I shift octaves and tempo on the fly, while the @ChaseBlissAudio MOOD MK II adds delay and pitch-shifting."

"700 Concrète"⚡️🎛️ - Buchla Thunder / Buchla 700


video upload by Stephano Gavilanes

"A new musique concréte improvisation with Buchla 700 emulations and my very own samples triggered with the Buchla Thunder as 8 simultaneous midi channels👌🏽

The album with recordings done only with both the Buchla Thunder and Lighting sets is happening💫

Headphones or loudspeakers suggested!

Music composed and recorded by Stephano Gavilanes.© Copyright 2025. All rights reserved."

Sunday, June 15, 2025

Dr. Who Daleks on the Ems Vcs3 and Moog Model 10


video upload by Rhythmicons

Luma-mu - Introduction and complete overview


video upload by DeftAudio

Luma-mu - Tutorials

video uploads by DeftAudio

Playlist:
1. Luma-mu - Tutorial 01 - Basic Patching
2. Luma-mu - Tutorial 02 - Creating own sounds with Luma.tools

"Making your own sounds for Luma-mu with https://luma.tools/ - Web-based sound editor for Luma-1 and Luma-mu."

"After launching the successful Luma-1 project, which is a precise recreation of the legendary Linn LM-1 with extended feature set, we’re announcing the beginning of shipping Luma-mu.

Luma-mu is a 10HP Eurorack module, essentially a single drum channel of Luma-1 which holds multiple sounds in its ROM. It plays samples digitally without microcontroller or software used, which guarantees the lowest latency and highest response of its 8-bit mu-Law DAC. It’s perfect for Luma-1 expansion or standalone operation.

Luma-mu feature set:
8-bit mu-law EPROM playback, exact copy of LM-1/Luma-1 channel
Removable EPROMs with 8 sounds on each, 16KB each (~1.5sec/ea)
True digital playback with no microcontroller or software involved, order of nanoseconds response time to the first sample
CV control for sound select allows playing various sounds at each step
CV control for Pitch and Dynamics
Gate control for Reset, Pause and sample Trigger
Can be clocked externally
Ability to play one shot samples or looped sounds to use it with perfectly looped waveforms as a wave oscillator
Comes with a software to make your own EPROMs
EPROM is accessible from the front with optional Luma-mu Reacharound extender module
Eurorack 10HP, 50mm depth

Luma-mu is available at https://www.deftaudio.com/
MSRP is $279."

6/14/25 (abhorrent) Roland System 100m + Metasonix R-54 + Zerosum Inertia Horripilation + (…)


video upload by Cfpp0

This is the first post to feature the Zerosum Inertia Horripilation.

"6/14/25 (abhorrent) Roland System 100m + Metasonix R-54 + Zerosum Inertia Horripilation + Peavey 1300 + Alesis MIDIVERB II

Some sludgy Sample & Hold. Pamela’s New Workout clocks the Roland System 100m 150 module’s S&H, which sends its clock out to the 140 envelope and its S&H out to both 110 VCOs, both 110 VCFs. The 140 envelope controls both 110 VCAs. The 150 LFO and the 140 LFO also modulate the VCFs on the two 110 modules. The upper 110 runs through the Zerosum Inertia Horripilation module, which is also modulated by the 150 S&H. The lower 110 runs through the Metasonix R-54, modulated by the 150 S&H signal. The R-54 runs through the Peavey 1300 and is panned center. The Horripilation signal is panned a bit left. Both signals receive some room reverb from the Alesis MIDIVERB II."

Korg Z1 Synthesizer Explorations


video upload by James Dyson

GS Music Bree6 // Small Simple and Sublime


video upload by Starsky Carr

https://www.gsmusic.com/

"Sound is everything... and the GS MUSIC Bree6 doesn't fail to deliver. There's an intangible quality to the tone of their synths. The GS MUSIC e7 bing their first offering, that bowled me off my feet when I first got my hands on it.

This was first announced in NAMM 2024, so it's took a while to get to me - and it was worth the wait. Its a single VCO 6 voice polysynth with a 24dB LP filter and all analog signal path ... so it's in the same ball park as Juno's except this is a VCO, not a DCO, and has a different flavour.

Importantly for a boutique synth manufacturer, this feels great to use - its got a knob per function interface thats so intuitive and easy to navigate you'll be an expert in minutes!"

MEMTEC! Custom tape delay console


video upload by Love Hultén

Incl:
Pianopjhonic module (Knobula)
Looper
Capasitive pins
Custom tape delay
PREVIOUS PAGE NEXT PAGE HOME



Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH