5 Jams with Lacrima Versio stereo autowah from Hell from Noise Engineering

video upload by Noise Engineering

"Check out these 5 Jams using the Lacrima Versio stereo Autowah from Hell on the Versio platform.

0:05 Jam 1
0:56 Jam 2
1:48 Jam 3
2:45 Jam 4
3:27 Jam 5

If you already own any of our Versio modules, you can swap to this firmware for free through the Customer Portal: http://bit.ly/3JvmC8N

More info on Lacrima Versio and the Versio platform: https://bit.ly/3Q4rSDx

Jam 1: We're using Vice Virga like an arpeggiator, inputting the 4 separate channels of the Chord, then sending the single output through Lacrima Versio for some filtering and chorusing. The Loquelic Iteritas Percido fills the room with cinematic booms filtered by Polaris, all clocked with the Horologic Solum.

Jam 2: The Lacrima Versio and the Imitor Versio delay fill up all the stereo goodness. Manis, Cursus, and BIA are our sound sources, with the Fractio Solum creating a 4/3 polyrhythm for the BIA. That gritty bass comes from the Manis running through Lacrima using chorus I and the Hit input being triggered by the clock from Horologic Solum.

Jam 3: Here's the Lacrima Versio 100% wet with the Loquelic Iteritas Percido.

Jam 4. Swapped to the Lacrima Versio autowah firmware and ran the Loquelic Iteritas Percido through it.

Jam 5: The Vice Virga is split into two switches: one alternates the pitch CV going into Chord, and the second alternates the CV going to the FM input on the Polaris filter. Then we bring up the Lacrima Versio, with its Chorus II droning the Loquelic Iteritas Percido in Free mode throughout. The Sat and Freq CVs are controlled with the Planar 2."

5 Jams with Cursus Iteritas wavetable oscillator from Noise Engineering

video upload by Noise Engineering

"Check out these 5 Jams using the Cursus Iteritas dynamically generated wavetable oscillator using orthogonal functions. We hope these jams will inspire you to think of new ways to patch.

0:05 Jam 1
0:48 Jam 2
1:38 Jam 3
2:08 Jam 4
2:51 Jam 5

More info on Cursus Iteritas: https://bit.ly/3jRt38o

Jam 1: We're adjusting the Cursus Iteritas' Fold and Structure controls while sending the signal out through the Electus Versio. The BIA with the kick.

Jam 2: We're adding in CV and pitch inputs on the CI one at a time, then adjusting the Center control to change the harmonic used to build the waveform. The Clep Diaz is adjusting the release on the Sinc Bucina. Mix is then sent through Electus Versio for the clocked reverb.

Jam 3: In this ambient patch, we've added a pitch input and 4 CV inputs to the CI, then we stepped aside and watched it play this beautiful generative journey.

Jam 4: It doesn't take much to make some exciting timbres out of the Cursus Iteritas. It plays very well here with Mimetic Digitalis, Fractio Solum, Horologic Solum, Loquelic Iteritas Percido, Bin Seq, and Imitor Versio. The Sinc Bucina shapes the sounds from Cursus, and the mix is sent through Electus Versio for some clocked reverb.

Jam 5: This time we're sending gates and modulation through every CV input on the Cursus Iteritas. The result is a huge variety of harmonic sounds and timbres. Then we follow that up with some Melotus Versio granular processing.

.-- .... .- - - .... . ..-. ..- .-. -. .. ... .. - . .-. .. - .- ...

Exploring and sharing engaging ideas in sound, music, and synthesis
• Eurorack, 5U
• VST3, AU, AAX plugins
• Reason Rack Extensions"

The Invaders (don’t be scared, just a Eurorack test ;-)

video upload by John L Rice

Noise Engineering Horologic Solum
Squarp Instruments Rample
Doepfer A-138sV
Erica Synths Black Hole DSP
4ms Company Listen Four 1/4 and Pods
Haken ContinuuMini

#modularsynth #electronicmusic #eurorackmodular

5 Jams with Fractio Solum clock divider/multiplier from Noise Engineering

video upload by Noise Engineering

"Check out these 5 Jams using the Fractio Solum clock divider/multiplier Eurorack module. We hope these jams will inspire you to think of new ways to patch.

0:05 Jam 1
0:35 Jam 2
1:08 Jam 3
2:02 Jam 4
2:36 Jam 5

More info on Fractio Solum: https://bit.ly/351qnkn

Jam 1: The clock from the Horologic Solum is feeding the FS, which is outputting three different clocks for the kick, snare and hat. Then we're using the Sinc Defero attenuator to adjust the CV going into the ratio input of the FS to make different patterns. Adding more attenuation by turning the Sinc Defero's knob will increase the ratio, creating some nice fills!

Jam 2: We like being able to add triplets to your sequence, and here's an easy way to do that with the Fractio Solum. You can also press on the encoder to mute the pattern to create silence in your sequence.

Jam 3: Here we're adding the same clocked tempo to the Fractio Solum and the tap input on the Electus Versio. The Fractio Solum's trigger pattern to the Manis Iteritas changes as the ratio changes, but the EV's echoes keep the original clock signal, making some really glitchy pumping reverb, especially with the Regen knob turned all the way up.

Jam 4: Here's how you can create unique step lengths: Send a clock into the FS, then out to clock the Mimetic Digitalis. Then, patch one of the Mimetic's CV outputs back to Fractio Solum's ratio input. Then program Mimetic's CV to change the length of each step.

Jam 5: In this patch, we're manually turning the ratio to change multiplications or divisions which increase or decrease the amount of triggers for those explosive stabs."

Eurorack with cello: An ambient journey featuring Ruina Versio and Electus Versio

video upload by Noise Engineering

"Here's a performance with cellist and NE's Chief Plumber Adam Lange-Pearson, using two Versios in his modular setup for the effects chain.

In this jam, Adam explored several things he found challenging:

Use light distortion (using Ruina Versio in this case) to color the cello sound without losing the, um, cello sound. He often has fun shredding with full-wave rectification cranked, but here he wanted to just add something to support the mood without it being obvious.

Improvise over short sequencer-based repetition. He says he has a lot to learn here, but it’s fun :) For this jam, 0-Ctrl provided rhythm, Horologic Solum was the flexible clock, and Vox Digitalis was the pitch-sequencer. The voice was the ever-versitile Loquelic Iteritas, in pink.

Most of the knob-twiddling is on Ruina Versio and Electus Versio.

There are several ways to get cello audio into the case: Adam played into a large condenser mic plugged into a small mixer (for the phantom power), and ran that into a eurorack receiver module."

Eurorack jam featuring Virt Iter Legio, Librae Legio

video upload by Noise Engineering

"Patrick O'Brien, our Ambassador to the Stars here at Noise Engineering, builds this dark ambient modular synth jam featuring the Virt Iter Legio stereo oscillator and Librae Legio dynamics processor.

Modules in this case:
ALM Pamela's NEW Workout
Mutable Instruments Ripples
Noise Engineering Quantus Ampla
Noise Engineering Electus Versio
Noise Engineering Loquelic Iteritas
Noise Engineering Virt Iter Legio
Noise Engineering Horologic Solum
Noise Engineering Vox Digitalis
Noise Engineering Mimetic Digitalis
Toppobrillo Stereomix
Noise Engineering Librae Legio

.-- .... .- - - .... . ..-. ..- -.-. -.- .. ... .. - . .-. .. - .- ...

Exploring and sharing engaging ideas in sound, music, and synthesis
• Eurorack, 5U
• VST3, AU, AAX plugins
• Reason Rack Extensions"

http://www.noiseengineering.us

Noise Engineering Blog: Bin Seq for rhythm modification

video by Noise Engineering

"From the blog: https://www.noiseengineering.us/blog/...
Here, we have our main sequencer, the Intellijel Metropolis, with the trigger output running into BS’s Beat input. We’re running our whole system with Horologic Solum, so we can patch a /16 clock into the BS Measure input to keep it in check. Playing with the switch positions changes our sequence on the fly, and we can easily revert back to the original by setting all the switches to the trigger position, or mute our voice entirely by setting all switches to off."

Noise Engineering Horologic Solum

Blog: Four voice patch with Horologic Solum

Noise Engineering

From the blog: https://www.noiseengineering.us/blog/...
Preorder Horologic Solum/Horologic Uter: https://www.noiseengineering.us/shop/...

"When used as a clock generator, the HS has a variety of uses. The top output is always the base clock, and the three outputs below that are divisions of it. Those outputs can be set to 2/4/8, 3/5/7, or 4/16/64 respectively with a flick of the “2 0 4” switch. Personally, I like to use the 4/16/64 setting when I want to keep a bunch of sequencers in sync and phase. I can route the root clock to their clock inputs, and use one of the slower clocks to keep them all in phase. The 3/5/7 setting I like a lot for slower, more experimental patches where I want to move away from a 4/4 grid. Especially when paired with something like Integra Funkitus to add some probability to the clock outputs, you can ditch the sequencers entirely and create an interesting patch just with some unusual divisions.
Let’s try something a bit more traditional, though: here, we’re using Horologic Solum to clock a Mimetic Digitalis and an Intellijel Steppy to trigger and modulate a four-voice patch."

Blog: Swing with Horologic Solum

Noise Engineering

"Since HS is voltage controllable, there are a lot of things that we can do to make our clocks more interesting. Gradual tempo changes can be automated with a slow LFO, or we can do more experimental things by patching envelopes, random CV, and other signals here for some more unusual results. However, there’s a more traditional use for it, too: swing! All we have to do is get a CV sequencer and clock it with HS, then feed the sequence into the CV input on HS. Let’s take a listen to what it can sound like."

Blog: Drum machine jam with Horologic Solum


"HS is a Eurorack module, but that doesn’t mean that we can’t use it with other pieces of gear, too! A lot of gear can take analog triggers or clock, which means that we can use Horologic Solum as well as Horologic Uter to control a plethora of other devices. HU, with its extra outs, is especially useful when using lots of gear since you have so many clock options. Here, we’re jamming on a rack with a voice, some sequencing, and some FX, alongside an external drum machine."

Additional posts featuring the Horologic Solum

Trovarsi Eurorack Techno Tutorial With Noise Engineering Modules

Published on Dec 10, 2019 Perfect Circuit

"LA-based techno artist Trovarsi recently came by our shop to talk about modular synth techniques. If you're curious about how to make techno with a modular synth, this is a great place to start. In this demo, she shows that even the most modest setups can be powerful musical tools when approached with some fundamental techniques and a healthy dose of experimentation. Learn more here: https://www.perfectcircuit.com/signal...

Trovarsi uses a 62hp Intellijel Palette case of Noise Engineering modules to create an array of alien percussion, slithering bass lines, and frantic, aggressive leads. By linking several sequencers and modulation sources to a single clock source (the Horologic Solum), she keeps everything moving together. Her only sound sources are a Basimilus Iteritas Alter and a Manis Iteritas—but by deploying some clever patching, she expands these into a complex tapestry of fluid, yet aggressive sound.

Proving you don't need a lot of gear to make compelling sounds, Trovarsi turns this tiny system into a full-fledged, in-your-face groovebox."

Noise Engineering CI+CIP Drone | LIP vs CIP

Published on May 21, 2019 Noise Engineering

"Cursus Iteritas lays down a drone, modulated by Pons Asinorum through Sinc Defero. Cursus Iteritas Percido in loop mode plays a high harmony. CIP's envelope out is used as a clock and divided by Horologic Solum, clocking Mimetic Digitalis. MD sequences CI and CIP's melody and harmony lines."

LIP vs CIP

Published on May 21, 2019 Noise Engineering

"Cursus Iteritas Percido and Loquelic Iteritas Percido sequenced by Numeric Repetitor and Mimetic Digitalis. CIP's Master Blaster out controls NR's Prime input to modify the sequence on the fly."

Noise Engineering Subtractive Patch

Published on Apr 30, 2019 Noise Engineering

"Companion to the blog post -1 to Talking: the Subtractive Voice
See more at https://www.noiseengineering.us/blog/...

Two Sinc Iters through an IME Polivoks filter and 2hp VCA, modulated by a pair of 2hp ADSRs, sequenced by Horologic Solum/Mimetic Digitalis/Bin Seq.

.-- .... .- - - .... . ..-. ..- -.-. -.- .. ... .. - . .-. .. - .- ..."

54HP Episode 5: Wave Machine

Published on May 4, 2018 Perfect Circuit Audio

"On episode 5 of 54HP we put together 'The Wave Machine' which is based around the Piston Honda MKIII dual wavetable oscillator. A Noise Engineering clock/divider and sequencer were used to control the Piston Honda. For modulation there is the Quadra which can be used as envelopes or LFOs. There is a Cinnamon state variable filter and dual VCA to control dynamics and harmonics and a delay for effects.

Let us know in the comments what type 54hp of case you want to see next.

Module List:
Noise Engineering Horologic Solum
Noise Engineering Mimetic Digitalis
Industrial Music Electronics Piston Honda MKIII
Intellijel Quadra
Bastl Cinnamon
2HP VCA
2HP Delay

Available here: https://www.perfectcircuitaudio.com/c..."

---
Supporters of MATRIXSYNTH get %10 off at Perfect Circuit Audio!

Noise Engineering Thanksgiving Eurorack Jams

Noise Engineering Thanksgiving jam with Integra Solum

Published on Nov 23, 2017 Noise Engineering

"Jamming with the upcoming Integra Solum. I use it as the trigger for two BIA and a Manis Iteritas, and also as a CV input for all of these plus a Loquelic Iteritas. No other triggers or CV are used except a pitch sequence for Manis."

Thanksgiving Manis Iteritas jam

Published on Nov 23, 2017 Noise Engineering

"Manis Iteritas and Loquelic Iteritas Percido making crazy sounds with the Mimetic Sequent and Malekko's Voltage Block and Varigate 8+. Horologic Solum as the one master clock to rule them all."

WMD Chimera - 10 minutes of sound NO TALKING

Published on Sep 20, 2017 WMDevices

"The description says it all. 10 (this one goes to 11) minutes with the new Chimera percussion module in a very basic and compact setup.

Clocked by the Noise Engineering Horologic Solum and sequenced by the Suit and Tie Guy Graphic Sequencer, the Chimera is the only sound source here. No external effects or sound embellishments... Except for a cup of coffee."

Noise Engineering Horologic Solum and Horologic Uter Tutorial

Published on Jul 13, 2017 Noise Engineering

"Tired of having mult and mult and mult your master clock signal? We've got you covered. Horologic Solum is a 4HP masterclock with three outputs and an optional Horologic Uter expander (4HP) with SEVEN more outs! Multiple modes and various controls mean you can clock a huge variety of tempos."

Spring 2017 Jam VII

Published on Mar 26, 2017 Noise Engineering

"All melody is being controlled by Jabara Sequent and Tonnetz Sequent.

Rhythm comes from:
Numeric Repetitor x2
Zularic Repetitor
Confundo Funkitus
Integra Funkitus
Integra Solum
Horologic Solum
Horologic Uter

There are 14 voices 11 of which are tuned:
Basimilus Iteritas x4
Basimilus Iteritas Alter x6
Sinc Iter + Ataraxic Translatron (sync source)
Manis Iteritas
Cursus Iteritas
Loquelic Iteritas Percido"

Noise Engineering Feburary Jam

Published on Feb 16, 2017 Noise Engineering

"Reconfiguring the cases for Sync 02 and Superbooth. Had to jam a while :)

All melody is being controlled by Jabara Sequent.

Rhythm comes from:
Numeric Repetitor x2
Zularic Repetitor
Confundo Funkitus
Integra Funkitus
Integra Solum
Horologic Solum
Horologic Uter

There are 14 voices 11 of which are tuned:
Basimilus Iteritas x4
Basimilus Iteritas Alter x6
Sinc Iter + Ataraxic Translatron (sync source)
Manis Iteritas
Cursus Iteritas
Loquelic Iteritas Percido"

Noise Engineering NAMM 2017 New Eurorack Module Videos

Published on Jan 23, 2017 Noise Engineering

Playlist:
NAMM 2017 First Tease
NAMM 2017 Second Tease
NAMM 2017 Cursus Iteritas One Minute Demo
NAMM 2017 Integra Solum One Minute Demo
NAMM 2017 Horologic Solum One Minute Demo
NAMM 2017 Basimius Iteritas Alter One Minute Demo
NAMM 2017 Variatic Sequent One Minute Demo
NAMM 2017 Soleo Vero One Minute Demo
NAMM 2017 Loquelic Iteritas One Minute Demo
NAMM 2017 Clep Diaz One Minute Demo
NAMM 2017 Loquelic Iteritas Percido One Minute Demo
NAMM 2017 Mimetic Sequent One Minute Demo
NAMM 2017 Case Jam [previously posted]
NAMM 2017: Noise Engineering - A Bunch Of New Eurorack Modules For 2017 [previously posted]
NAMM2017: Introducing Noise Engineering new Eurorack Modules [http://www.analoguezone.com/]

Noise Engineering System In Depth

Noise Engineering System In Depth from Muff Wiggler on Vimeo.

"Stephen McCaul of Noise Engineering System Walk Thru

http://store.muffwiggler.com/collections/noise-engineering/products/noise-engineering-basimilus-iteritas

2014 Product Line:
Ataraxic Translatron - LFSR VCO
Basimilus Iteritas - Drum Synthesizer
Zularic Repetetor - Rhythm Sequencer
Sinclastic Empulatrix - Envelope Generator with minimum VCA
Variatic Sequent - Simple Gate Sequencer
Variatic Dilato - CV Expander for VS
Variatic Multium - Gate Expander for VS
Continuus Sequent - Simple CV Sequencer
Roticulum Sequent - Sequent family combiner
Horologic Solum - Simple LFO for sequencer clock"

MuffWiggler Interviews Noise Engineering

MuffWiggler Interviews Noise Engineering from Muff Wiggler on Vimeo.

"MW Interviews Stephen McCaul of Noise Engineering.

2014 Product Line:
Ataraxic Translatron - LFSR VCO
Basimilus Iteritas - Drum Synthesizer
Zularic Repetetor - Rhythm Sequencer
Sinclastic Empulatrix - Envelope Generator with minimum VCA
Variatic Sequent - Simple Gate Sequencer
Variatic Dilato - CV Expander for VS
Variatic Multium - Gate Expander for VS
Continuus Sequent - Simple CV Sequencer
Roticulum Sequent - Sequent family combiner
Horologic Solum - Simple LFO for sequencer clock"