
Showing posts sorted by date for query Mindburner. Sort by relevance Show all posts
Showing posts sorted by date for query Mindburner. Sort by relevance Show all posts
Saturday, May 30, 2020
Terminator AKAI AX-80 and BigSky
Published on May 30, 2020 Mindburner
"blink and you will miss it AX-80 Terminator theme"
Saturday, May 16, 2020
Prophet 5 - A quick tune and a look inside
Published on May 16, 2020 Mindburner
"The classic Sequential Prophets 5 rev 3.3
tuning and a look inside the instrument.
I'm no synth tech, so info here is for personal use only.
Always consult a qualified tech,especially with such an expensive instrument
headphone users, warning sound can be loud"
Prophet 5 - A rough mess round after the tune up
Saturday, February 22, 2020
BOSS DR-55 ANALOGUE DRUM MACHINE, INSIDE AND CLEANUP
Published on Feb 22, 2020 Mindburner
"The classic BOSS DR-55 has been used by many bands and artists over the years."
Wednesday, February 05, 2020
Repair of the Soundmaster STIX ST-305 analogue drum machine
Published on Feb 6, 2020 Mindburner
Re-Published on Feb 5, 2020 Mindburner
"This little analogue drum machine was realised by the Italian company Soundmaster in the early 80's
This example was purchased on eBay for around £25 in dodgy condition and operation unknown.
Bodges galore and lack of a service schematic make repairing this machine a bit of a nightmare.
I think the bodges are factory fitted as they use the same kind of enameled resistor as the main PCB.
Part 1 of a 2 part series
sorry about my plosive popping on the commentary.
Also the TA5558 in not a timer, rather a dual op amp
music: Crystalline Stricture, Harbour, No Time, Secret Remix"
Repair of the Soundmaster STIX ST-305 analogue drum machine PART 2 OF 2
Published on Feb 7, 2020 Mindburner
"This little analogue drum machine was realised by the Italian company Soundmaster in the early 80's
This example was purchased on eBay for around £25 in dodgy condition and operation unknown.
Bodges galore and lack of a service schematic make repairing this machine a bit of a nightmare.
I think the bodges are factory fitted as they use the same kind of enameled resistor as the main PCB.
Part 2 of a 2 part series"
Saturday, January 04, 2020
MINDBURNER stable source MIDI clock device
Published on Jan 4, 2020 Mindburner
"A variable master clock with stable timing for all your MIDI needs.
Here shown with my DINSYNC device to drive a Roland TR606
www.mindburner.co.uk"
MINDBURNER
Saturday, December 14, 2019
A quick demo of the MINDBURNER GATE to TRIGGER converter
Published on Dec 14, 2019 Mindburner
"makes a long Gate signal into a short trigger pulse, ranging from 1 second to 1/10 of a second.
It has 2 seperate channels and is powered from 5v DC
The pulse in this video is generated by the Sequential Circuits Pro One"
Sunday, October 13, 2019
Inside the Yamaha TX7 module and replacing the LCD display
Published on Oct 13, 2019 Mindburner
"I look at the inside the unit and installing a replacement 16x1 backlit LCD display. Final job has wires neatly tie wrapped and insulated with shrink wrap.
Backup battery seemed fine, but swapped it out anyway as a precaution.
I used some autosol metal polish to clean up the LCD display cover and case.
link to my ambient track featuring mostly TX7, with a little bit of Roland Juno alpha 2
https://soundcloud.com/crystallinestr...
TX7 Controls:
- wheel amount control
- aftertouch amount
- foot control amount
- breath control amount
- Midi channel assign
- mono or poly mode
- pitchbender range amount
- volume gain mix
- portamento amount
-DX7 COMBO MODE The TX7 is basically a polyphony expander for DX7 and many functions are accessible only using the original keyboard. The performance mode team-up with the dx7 and a special set of sounds is provided for both TX7 / DX7.
-------------------------------------------------------------------
A small one finger tune to finish
made with TX7 and LM1 drum machine plug in
at 15:56
-------------------------------------------------------------------"
Friday, September 13, 2019
Some info and inside a Korg Poly-61's
Published on Sep 13, 2019 Mindburner
"The Poly 61 and some info on the MKI and MKII"
Thursday, July 25, 2019
Moog the source, replacement control panels
Published on Jul 25, 2019 Mindburner
Microwave oven or McDonald's cash register interface. Never made that analogy before. Funny.
Thursday, February 14, 2019
Mindburner MIDI to DINSYNC converter
Published on Feb 14, 2019 Mindburner
"A demo of my DINSYNC device.
24PPQN for Roland and others.
Sync a TB303/TR6060 to MIDI clock
Either from a DAW or hardware sequencer
Other clock outputs, e.g 48PPQN for Korg available on circuit board pads
www.mindburner.co.uk
available with top cover"
"MINDBURNER MIDI TO DINSYNC
Got MIDI gear and Roland DINSYNC kit?
Or need a device that outputs multiple clock rates?
Then this device will help.
Also has a built in MIDI Thru, to pass incoming MIDI data to other synths / modules
What does it do?
It outputs standard 24PPQN and start/stop signals. Has MIDI IN, OUT and DINSYNC OUT
Also pads for 1,2,4,8 and 48 PPQN (used on some old Korg drum machines)
How is it powered?
Comes with 2.1 to USB lead included to power from USB source (0.75m L)
Can also use pretty much any 5-7v DC 'wallwart' type power transformer. With a 2.1 mm female plug. Positive on the Tip of the plug.
Please note...There is no power adapter supplied as standard with this unit.
Wednesday, January 02, 2019
headmelter oscillator generator from mindburner
Published on Jan 2, 2019 Mindburner
"oscillator sound engine, for experimental sounds and music"
Tuesday, September 11, 2018
Quick look inside a Prophet 5 synthesizer
Published on Sep 11, 2018 Mindburner
"after hearing a distortion on voice 4, I opened up the synth and of course it went away"
Update on fixing the Akai VX600
Published on Sep 11, 2018 Mindburner
"I finally fixed the VX. The fault was either an electrolytic capacitor or a bad solder joint on the -12v negative regulator. 6535/31 not 75 as I said in the video"
Previous posts.
Tuesday, September 04, 2018
Repaired Akai VX-600 Analogue Synthesizer
Published on Sep 4, 2018 Mindburner
"A few homemade sounds"
Friday, December 22, 2017
Akai VX600 sounding better after the DAC adjustment
Published on Dec 22, 2017 Mindburner
"my VX600 was either failing auto calibration or was taking ages.
The solution is to check and adjust the DAC voltage to 2.5v
Makes a world of difference"
Saturday, November 11, 2017
mindburner midi products range
Published on Nov 11, 2017 Mindburner
"small showcase video, featuring 10,7, 5 and 3 way MIDI thru devices
plus the 3 into 1 MIDI autoswitch"
Tuesday, January 10, 2017
Электроника ЭМ 25 SYNTHESIZER
Published on Jan 10, 2017 Mindburner
"A quick and dirty demo of the Elektronika EM-25 Russian synth
spot of Bigsky reverb and Small stone phaser"
Wednesday, June 01, 2016
Quick Crowminius Synth Demo. Dr WHO theme
Published on Apr 16, 2016 Mindburner
"demo done on the Crowminius synthesizer. Lead using 3 oscillators."
The Crowminius is currently seeking funding on Kickstarter here.
Very quick and dirty Crowminius demo. This is an excellent minimoog PCB, designed by the Old Crow
Published on Feb 12, 2016
"PCB designed by the Old Crow. This excellent minimoog based synth is a very cool operator. Very faithful replication of the original model E. Lovely bass and nice leads. I built the PCB into my own case and designed panels. It also has a sequencer included. I was going to add a RAT distortion and space echo but basically ran out of internal space."
Thursday, January 03, 2008
Mindburner Prophet 5 demo song
YouTube via waheex
"A demo of a new song I wrote under the name Mindburner featuring my recently midi'd prophet 5. Not a great vid but my first youtube effort."
PREVIOUS PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH













© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH