Showing posts sorted by date for query MrRitchieDrums. Sort by relevance Show all posts
Showing posts sorted by date for query MrRitchieDrums. Sort by relevance Show all posts
Friday, September 21, 2012
MOOGERFOOGER MF-101 & MF-107 with MFB Urzwerg sequencer Moog Analog Synthesizer
Published on Sep 21, 2012 by MrRitchieDrums
"Experimenting with just 3 boxes: Moog MF107 FreqBox & MF101 Filter being controlled by the MFB Urzwerg sequencer."
Friday, September 07, 2012
Trogotronic 676 & MFB Urzwerg Sequencer Modular Synthesizer
YouTube Published on Sep 7, 2012 by MrRitchieDrums
Just having Fun!!
http://www.trogotronic.com
http://www.mfberlin.de
Sunday, July 15, 2012
Synare Sensor Finger Drum Synthesizer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Up for bid here is a Synare Sensor drum trigger/synthesizer made in 1979 or thereabouts by the late, great Star Instruments Co. out of Stafford Springs, CT. It's a smaller version of the legendary Synare drum synthesizers that was designed to be screwed down onto the rim of a drum. Now it's more often used as a finger-controlled portable analog synthesizer. This thing has a ton of sonic possibilities in a very few ounces of box. And this particular box is in impeccable, sparkly, like-new condition, looks and plays great!
Physically, the front has knob controls for Tune, LFO Frequency, LFO Modulation, Decay, Oscillator Sweep, and Volume. There's also an internal trim pot you can turn to adjust the sensitivity of the unit, accessible either by opening up the case or by inserting a thin non-conductive screwdriver in the little hole between the MOD. and SWEEP knobs. On the back is a 1/4" output jack, a 1/4" footswitch in for silencing the output, and a 1/4" footswitch out for chaining the footswitch to multiple pedals. There's an easily-removable bracket on the bottom for screwing the Sensor down on the rim of your drum. Dimensions are 3" by 4" by 6.25", including the knobs and the attachment bracket, weighs about 11 ounces with the battery installed. Speaking of which, the unit runs on one 9-volt battery, included in this auction.
Sonically, I'll let a couple YouTube videos tell the story. The first one here is a fellow who's attached his Sensor to his drum rim, as Star Instruments originally intended, then run it through a looping pedal as Star Instruments originally never could have imagined:"
YouTube Uploaded by MrRitchieDrums on Jan 14, 2011
"Next one's a guy working it out on his Sensor with just his fingers for a full six minutes. (I think I even hear a bit of the Star Spangled Banner in there in the middle.) (And keep in mind he's just playing it through a simple tube amp. Imagine this going through a nice chain of effects pedals!)"
YouTube Uploaded by amukat on May 24, 2010
"Up for bid here is a Synare Sensor drum trigger/synthesizer made in 1979 or thereabouts by the late, great Star Instruments Co. out of Stafford Springs, CT. It's a smaller version of the legendary Synare drum synthesizers that was designed to be screwed down onto the rim of a drum. Now it's more often used as a finger-controlled portable analog synthesizer. This thing has a ton of sonic possibilities in a very few ounces of box. And this particular box is in impeccable, sparkly, like-new condition, looks and plays great!
Physically, the front has knob controls for Tune, LFO Frequency, LFO Modulation, Decay, Oscillator Sweep, and Volume. There's also an internal trim pot you can turn to adjust the sensitivity of the unit, accessible either by opening up the case or by inserting a thin non-conductive screwdriver in the little hole between the MOD. and SWEEP knobs. On the back is a 1/4" output jack, a 1/4" footswitch in for silencing the output, and a 1/4" footswitch out for chaining the footswitch to multiple pedals. There's an easily-removable bracket on the bottom for screwing the Sensor down on the rim of your drum. Dimensions are 3" by 4" by 6.25", including the knobs and the attachment bracket, weighs about 11 ounces with the battery installed. Speaking of which, the unit runs on one 9-volt battery, included in this auction.
Sonically, I'll let a couple YouTube videos tell the story. The first one here is a fellow who's attached his Sensor to his drum rim, as Star Instruments originally intended, then run it through a looping pedal as Star Instruments originally never could have imagined:"
YouTube Uploaded by MrRitchieDrums on Jan 14, 2011
"Next one's a guy working it out on his Sensor with just his fingers for a full six minutes. (I think I even hear a bit of the Star Spangled Banner in there in the middle.) (And keep in mind he's just playing it through a simple tube amp. Imagine this going through a nice chain of effects pedals!)"
YouTube Uploaded by amukat on May 24, 2010
Saturday, November 05, 2011
SSL SampleCorder Synth Module Demo # 2 w Synthesizers.com & STG
YouTube Uploaded by MrRitchieDrums on Nov 5, 2011
"Another demo of the SSL SampleCorder Synth Module with 3 Synthesizers.com VCOs , Q150 Transistor Ladder filter, 2 Envelopes & the STG Mankato Filter"
Wednesday, November 02, 2011
SSL Samplecorder & Steiner Filter Synthesizer Modules
YouTube Uploaded by MrRitchieDrums on Nov 2, 2011
"My first test with the Synthetic Sound Labs JJP Samplecorder. The possibilities with this module are endless. The steiner filter always adds a cool character...."
Wednesday, October 26, 2011
Sunday, October 23, 2011
Animoog iPad App by MOOG with sequencer
YouTube Uploaded by MrRitchieDrums on Oct 22, 2011
"This app sounds Beautiful! Thinking about producing a whole album with it...
Better quality WAV audio here:
http://soundcloud.com/ritchiedrums/animoog-ipad-app-by-moog"
ANIMOOG iPad App by MOOG by ritchieDrums
Animoog - Moog Music Inc.
iPads on eBay
Monday, September 12, 2011
Blue Lantern 6HP POLIVOKS VCF
via this auction
See bluelantern (RSS) for more.
"LM4250 VCF POLIVOKS FILTER MODULE
SPECS:
INPUT: (1) AUDIO IN, (2) CV INPUT, (1) FM INPUT
OUTPUT: (1) BP OUT, (1) LP OUT
THERE IS A BRITE SWITCH THAT WILL MAKE THE FILTER SOUND BRIGHTER IN SOUND. IT WILL ALSO MAKE THE FILTER SELF OSCILLATE WHEN THE BRITE SWITCH IS ON AND THE REZ IS TURNED UP.
PWR FORMAT: EURO 10 PIN IDC CONNECTOR
There is a trimmer to adjust the Cutoff range.
You need to have a Euro Format Modular case to install this unit. I supply a 10 pin to 16 pin IDC Ribbon cable."
Blue Lantern Synth ON THE RUN STYLE Sequence
YouTube Uploaded by MrRitchieDrums on Jul 23, 2010
"Blue Lantern Modular Synthesizer with MFOS Rotary Sequencer. 8 notes in the style of PINK FLOYD's ON THE RUN from DARK SIDE OF THE MOON. Polivoks type filter gets some great percussion effects with some Noise added"
polivoks2010-005.wmv
YouTube Uploaded by bluelantern320 on Jun 9, 2010
See bluelantern (RSS) for more.
"LM4250 VCF POLIVOKS FILTER MODULE
SPECS:
INPUT: (1) AUDIO IN, (2) CV INPUT, (1) FM INPUT
OUTPUT: (1) BP OUT, (1) LP OUT
THERE IS A BRITE SWITCH THAT WILL MAKE THE FILTER SOUND BRIGHTER IN SOUND. IT WILL ALSO MAKE THE FILTER SELF OSCILLATE WHEN THE BRITE SWITCH IS ON AND THE REZ IS TURNED UP.
PWR FORMAT: EURO 10 PIN IDC CONNECTOR
There is a trimmer to adjust the Cutoff range.
You need to have a Euro Format Modular case to install this unit. I supply a 10 pin to 16 pin IDC Ribbon cable."
Blue Lantern Synth ON THE RUN STYLE Sequence
YouTube Uploaded by MrRitchieDrums on Jul 23, 2010
"Blue Lantern Modular Synthesizer with MFOS Rotary Sequencer. 8 notes in the style of PINK FLOYD's ON THE RUN from DARK SIDE OF THE MOON. Polivoks type filter gets some great percussion effects with some Noise added"
polivoks2010-005.wmv
YouTube Uploaded by bluelantern320 on Jun 9, 2010
Saturday, August 27, 2011
Din Sync OSC 303 + SSL Steiner + DOTcoms + MORE!
YouTube Uploaded by MrRitchieDrums on Aug 27, 2011
"Hurricane Irene has got me indoors. Luckily the power is Still going, so I fired up the sequencers and my New OSC 303 by Din Sync! Also 4ms clock multiplier being shuffled,rotated&slipped, SSL Steiner filter, Mattson VCA, Tom Wiltshire digital ASDRs, Synthesizers.com Q106's as LFOs, Q150 filter, Q171, Q108 & Q110 Noise in the audio section of the Catgirl sequencer"
Saturday, May 21, 2011
Korg MS-20 1st attempt with BFD on TrapKat
YouTube Uploaded by MrRitchieDrums on May 21, 2011
"Borrowing this MS-20 for a while....... Some nice bass with those classic filters. This is one of my few pieces in 3/4 time........"
Friday, April 29, 2011
Horror Onward in Scary Mono.
YouTube Uploaded by MrRitchieDrums on Apr 28, 2011
"More experimenting with analog sequencers & quantizers. This one produced a scary piece."
Gear:
"Blacet Binary Zone is providing clock to the 4MS clock multipler. The first sound you hear is the MFOS rotary sequencer going to a Blue Lantern Black Jack VCO though a Polivoks filter, then the EHX Memory Boy Delay. TipTop Z8000 sequencer 4 vertical rows are receiving different 4ms clocks and going to 4 channels of the Synthesizers.com Quantizer modules to 4 Synthesizers.com VCOs through the Mattson VC Mixer, then finally to the STG Mankato Filter. The Z8000 16 steps are going to a COTK quantizer, then to MOOG Taurus III CV in. Finally 4 horizontal z8000 steps are going to the Hordijk OSC HRM through a Synthesizers.com filter also being fed Pink noise. All quantizers are set to Minor/scale & LOTS of LFOs are Here & There............... "
LABELS/MORE:
Blacet,
bluelantern,
COTK,
DIY,
EHX,
Electro Harmonix,
Featured,
MFOS,
MMM,
MOOG,
SOVIET,
STG,
synthesizers.com,
TipTop Audio,
Video
Saturday, April 23, 2011
Modular Synthesizer OSC HRM Attack 2011
YouTube Uploaded by MrRitchieDrums on Apr 23, 2011
"Bass line produced by the Catgirl sequencer to (2) Q106 VCOs then a synthacon filter. A Hordijk HRM OSC is being triggered by the MFOS Rotary Seq & a MATTSON Envelope is altering inputs along with LFOs and it is going through a Q107 Filter(w LFO panned R). MFOS is also going to the MOTM 1485 GX-1 Diode Filter(1v input) through a Metasonix R52(also LFO panned L).TipTop Z8000 is sending 2 pitches to 2 Blue Lantern Black Jack VCOs (4 steps) through the Mattson filter. Also sending 4 steps to a Q106 through the STG Mankato filter. Finally 16 steps from the Z8000 are going to a Malekko Anti-Osc being altered by a Noisering!!"
LABELS/MORE:
bluelantern,
cgs,
DIY,
Featured,
Malekko,
MFOS,
MMM,
STG,
synthesizers.com,
TipTop Audio,
Video,
Wiard
Sunday, March 27, 2011
Sad Synthesizers.com Quantized Chords from the Tip Top Z8000
YouTube Uploaded by MrRitchieDrums on Mar 27, 2011
"The 4 horiontal steps from the Z8000 sequencer are going through Synthesizers.com Quantizers to 4x Q106 VCOs, then a Mattson Mixer & filter to create chords. The 16 step vertical Z8000 steps are receiving a rotated & skipped clock from the 4MS multiplier & going to a COTK quantier to 2 BlackJack VCOs, then to the STG Mankato filter. The Blacet Binary Zone is sending divided clock to my MFOS rotary sequencer which is sending CV to the MOTM e340 generating clouds to the EHX memory boy delay"
LABELS/MORE:
Blacet,
COTK,
EHX,
Electro Harmonix,
MMM,
MOTM,
STG,
synthesizers.com,
TipTop Audio,
Video
Wednesday, March 23, 2011
Tip Top Z8000 Meets Synthesizers.com Quantizers with Blacet Mini Wave & More
YouTube Uploaded by MrRitchieDrums on Mar 23, 2011
"Got some new modules & started re-arranging the cabinet. Took a break & started patching: Z8000 sequencer is controlling 4 Synthesizers.com VCOs going to a MATTSON CV mixer(LFOs controlling 2 channels) then to the MMM filter. The MFOS & Catgirl sequencers are going to a Blue Lantern CV-LFO & a Blacet Mini Wave(scored on CraigsList) then to a Synthacon filter!! Everything ends up through a .com VCA"
LABELS/MORE:
4ms,
Blacet,
cgs,
DIY,
Featured,
MFOS,
MMM,
Steiner Parker,
synthesizers.com,
TipTop Audio
Sunday, February 20, 2011
Metasonix R54 + Z8000 + Polivoks & others!
YouTube via MrRitchieDrums | February 20, 2011 | 1 likes, 0 dislikes
"Using the Metasonix R54 as the rhythm track for some new ideas with the modular synthesizer"
Friday, February 04, 2011
Michael Czajkowski - People The Sky - Buchla 100 Album 1969
YouTube via MrRitchieDrums | February 04, 2011 |
"The first 5 minutes from Michael Czajkowski's People The Sky Album from 1969. Very Cool Buchla 100 modular synthesizer sounds!!"
Monday, January 24, 2011
Mattson Mini Modular Synthesizer Filter demo
YouTube via MrRitchieDrums | January 24, 2011 |
"Just going through some different applications for this COOL FILTER!!"
http://mattsonminimodular.com/
Tuesday, December 07, 2010
PART 1 - TipTop Z8000 Eurorack Synthesizer Module
YouTube via MrRitchieDrums | December 07, 2010 | 0 likes, 0 dislikes
"Been experimenting with the Z8000 sequencer module. Trying different ways to make it 4 different sequencers with multiple clocks from the Blacet Binary Zone & 4MS multiplier module. CHECK OUT PARTS 2 & 3......."
Sunday, October 10, 2010
EHX Memory Boy Analog Delay Synth Module NEW FRAC PANEL
YouTube via MrRitchieDrums | October 10, 2010
"Converted the Guitar Pedal to a Synthesizer Module with a Custom Acrylic Panel."
This one reminded me of this post on whether Electro Harmonix should make modules. Be sure to take the polls there if you haven't already.
Monday, October 04, 2010
Testing 4ms shuffling clock multiplier
YouTube via MrRitchieDrums | October 04, 2010
"Blacet Binary Zone clock out to the 4ms shuffling clock multiplier which is sending clock to both sequencers.
The RIGHT seq is receiving x1 and The LEFT seq is 2x.
LEFT skips a beat randomly(at .08, .32 and .51)"
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH