Low Frequency Expander for the OB6 & Prophet-6

Published on Apr 11, 2019 Steve Hunt

Playlist:
Low Frequency Expander for OB-6. Overview.
Low Frequency Expander for OB-6. No talking.
Low Frequency Expander for OB-6. Demo of LFO 2.
Low Frequency Expander for OB-6. Demo of LFO 3.

Update: you can reach out to Steve Hunt on YouTube if you are interested in one.

"My Low Frequency Expander for the OB6. Also will work with Prophet 6."

I reached out to Steve Hunt asking if this was a one off or if it will be made available for others. He replied: "Almost ready to make a few. Just a few software tweaks then another look at costs. Might make a batch of 10 if there's enough interest." If you are interested you can reach him on YouTube.

Here's some additional info on the features:

Envelope with 8 knobs: A1, L1, A2, D1, L2, D2, S, R. Plus amount.

So that's 6 stages. Loopable start to end of R or from start to end of D2.

Syncable to midi clock.

Alternate mode is 8-step control sequencer using the 8 knobs as levels.

Thinking about using a shift key to add 8 more steps LFO1 sync, wave, frequency, amount.

LFO2 sync, wave, frequency, amount.

LFO3, sync, frequency.

sampling frequency, wave shape (continuous from ramp through triangle to saw), pattern, amount.

Generates smooth waveforms or sample/held steps depending on sample frequency knob.

All four modulators can be multiplied by a source including velocity, AT, mod wheel, the other modulators etc and can all be sent to any of the synth's CC destinations.

So for example, the Envelope can be multiplied by the output of LFO 3 and sent to Resonance and LFO 1 can be multiplied by aftertouch and sent to PWM1...

Dedicated distortion knob.

'Engage' button to enable/disable all outputs.

'Write' button.

'Shift' button. eg shift-write makes init patch. shift-wave decrements the wave selection.

1000 patch storage locations synced to the synth's patch numbers.

Large 20x4 red OLED. Midi in, out and thru.

Update2: via Steve Hunt on YouTube

"Costs and timescales.

I've done a lot of work on reducing cost. I've removed a PCB so there's only one, removed an IC and about 25 smaller components and found a cheaper supplier of the aluminium front panel. All totaling a saving of £90 , in 10 off quantity.

The front panel has a lead time of 3-4 weeks and I've not used the supplier before so I want to buy one for myself to check it out before I buy a batch. That means the first deliveries can be about 7-8 weeks from now.

So if I can get 10 deposits from you of £100 each, I can order the long lead-time components and ask you for the balance before shipping out. If you want to take part in this first batch of 10 then email me to discuss paying the deposit etc.
stevehunt99@gmail.com

I'm offering three options:

Standard: Metal box with aluminium front panel. £440. plus postage.
Deluxe: As above but with walnut end pieces. £480 plus postage.
Bones: for those that want to make/source their own box and panel, just assembled electronics and knobs. As above but no panel or box. £345 plus postage.

Or I could put it through a platform like eBay or Kickstarter and add 10% to cover their fees.

No VAT to add as I'm not VAT registered but I expect some countries will want to add taxes or duty to what you pay, but I think you pay them when importing.

Unless Behringer or someone else with a Chinese factory buy the design off me or rip it off, that's as far as I can go on price, unless volumes really take off, but I'm taking it one (small) step at a time.

I will also offer an analog I/O option for all of the above but I haven't costed this yet. It will add one CV in and one CV out. There aren't any long lead-time items in it and it can be added to your order a lot later."

miniMO & Synthmulator Modular Synthesizer Simulator

You might remember, the miniMO mini modular synth. miniMO has teamed up with Synthmulator, makers of a 3D rendered virtual modular synth. You can find a video below. The following is some info from Jose, the developer behind miniMO:

"I've partnered with a friend who developed a virtual modular synth and I'll be giving away a promo code for his synth with every miniMO value pack (which includes three modules + accessories). Combined, these synths give you every chance to learn modular synthesis before shelling out a ton of money on a modest eurorack."

You can find miniMO at www.minimosynth.com, and Synthmulator at www.synthmulator.com.


BTW, if that ad looks familiar to you, it's based on this classic TB-303 ad (captured below).


Published on Nov 4, 2018 Synthmulator

"Synthmulator is a video game where you can play with a modular synthesizer."

CLICK FOR MORE »

Dave Smith Instruments PRO 2 Part. 1

Published on Apr 10, 2019 DKS SYNTH LAB

SPAZEboard6 Alternative Firmware for Gotharman's Little deFormer 3 / LD3

Variator Published on Apr 11, 2019 gotharman

via Gotharman

"SPAZEboard6 are an alternative firmware version for Little deFormer 3, that is combined with an analog filterboard, that has 6 analog filter chains, with each 2 analog filters (HPF + LPF), for a total of 12 analog filters. The analog filters are available in part 1 to 6.

Since this firmware version turns your LD3 into a completely different instrument, with a different sound structure, the presets that are previously held in your LD3, can't be loaded, if you turn it into a Spazeboard6 LD3.

It can though import PolySpaze presets, with 80% compability.

This firmware will run on your LD3, without the analog board installed. You will though (obviously) then miss the analog filters. When running this firmware on an LD3, without the Spazeboard6 installed, all analog fúnctions will be locked. This is done in order to protect the un-modified LD3 hardware. Further details can be found in the Spazeboard6 user manual, under 'Installing Spazeboard6'.

-6 monophonic parts with 2 oscillators (1 can play back samples), ring modulator, 2 analog filters (HPF+LPF), 1 digital filter, 2 insert effects, 1 VCA, 3 envelopes and 4 random generators.

-2 monophonic parts with 1 oscillator (can play back samples), 1 digital filter, 1 VCA, 3 envelopes and 4 random generators.

-8 parts for controlling external MIDI gear.

-16 global LFO's and 8 global LFO-trigged random generators.

-2 output effect processors.

The sequencer comes with 16 advanced note tracks and 32 controller/CC tracks.

CLICK FOR MORE »

Erica Synths Plasma Drive High Voltage Xenon Tube Distortion In Eurorack

Published on Apr 11, 2019 Perfect Circuit

"Erica Synths Plasma Drive module brings the high voltage xenon tube distortion developed by Gamechanger Audio into the eurorack format. This eurorack version has octave and sub octave generators built in as well as a two band EQ and voltage controls.

The first part of this video the entire mix of Mutable Instruments Plaits and Endorphin.es Blck_Noir are run through the Plasma Drive. In the second part the Erica Synths Bassline is run through Plasma Drive both used as a bassline and drone synth.

Plasma Drive available here: https://www.perfectcircuit.com/erica-..."

---
Supporters of MATRIXSYNTH get %10 off at Perfect Circuit!

Strymon Volante - Peter Dyer Synth Examples - Demo

Published on Apr 11, 2019 strymon

Instruments used in the video, in order of appearance:

Moog Subsequent 37
Dave Smith Instruments Prophet Rev2
Critter & Guitari Organelle
Moog DFAM
Nord Stage 3
Moog Grandmother

Signal path: Synth → Volante → audio interface

"Recently we had the pleasure of spending some time with keyboardist/producer/sound designer Peter Dyer while he played a wide variety of synths through Volante, and now we're excited to share the video from that day with you. Peter has worked with American Idol, Aloe Blacc, Avicii, Mariah Carey, Adam Lambert, St. Vincent, Cam, Flo Rida, Quadron, Niall Horan, AlunaGeorge, Kim Petras, Rita Ora, Katy Perry, Miguel, Rafferty, and Monogem. He's also provided scoring for Chevrolet, Apple, and BMW, as well as sound design for Dave Smith Instruments (Sequential), Moog, Novation, and Pioneer DJ.

Follow Peter: https://www.instagram.com/peterkeys88/
Peter's website: https://www.peterdyer.net/

==================================================

Volante: Sounds From The Expanse.

Three Magnetic Delay Types, Spring Reverb, Looper, and More.

Delivering truly exceptional sound quality and intuitive playability, Volante is designed to radically enhance the sonic expressiveness of your pedalboard. Featuring magnetic drum echo, tape echo, and reel-to-reel studio echo, Volante is a stereo multi-head delay that also offers a looper and vintage spring reverb, with powerful sound-sculpting controls for limitless sonic possibilities.

Create instant retrofuture atmosphere with evocative vintage delay tones. Activate your imagination with evolving ambient echoes and warm, organic feedback with just the right amount of grit. Sculpt your soundscape in real time as Volante becomes an extension and expansion of your musical instrument. Infuse your pedalboard with stunning vintage vibes that resonate and inspire."

RARE Vintage 70s Moog 301a Synthesizer Amplifier / Mixer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Only two others have been posted here before.

via the listing:

"RARE Vintage 70s Moog 301a synthesizer amplifier

This came from a church and was in working condition when last used. It powers on fine

Please see pictures for condition / item specifics."

CLICK FOR MORE »

Yamaha PortaSound MP-1 w/ Built-In Printer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Rare vintage 1980's Yamaha PortaSound keyboard/synthesizer. Has a printer. Comes with a hard plastic case. All buttons are present and work. No power cord, takes batteries. In good working condition."

The printer is on the right. It looks like one of those small ribbon printers on a cash register. I assume it is to record your notes. Made me think of the RMI KC-1 that accepts punch out cards with patch presets.

CLICK FOR MORE »

NISSIN C-16 CUP NOODLE Sampler/Synth KEYTAR

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Cup Noodle keytar for you! It should have a cup holder for your cup noodle.

"NISSIN C-16 CUP NOODLE Digital Sampler/Synth Keytar!
special Prize model of CASIO SK-1 !
comes with original strap,manual,BOX.
VINTAGE 80's SUPER RARE!"

CLICK FOR MORE »

Moog Micromoog Vintage Analog Mono Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"100% fully functional micro moog. Fully tested.

Even the ribbon pitch controller works.

This has been in storage for the last few years.

Cosmetically, it is very good for it's age. Keys still have a shine. The right side piece of metal trim is bent a bit. See photos."

CLICK FOR MORE »