MATRIXSYNTH

M2Synth Sequencer 192 GoTo bank/track Test #modularsynth #synthesizers #modularsynth #stepsequencer

video upload by John L Rice

See the Soundtronics label below for more.

Fender Rhodes 1973 with Avion Studios Preamp

video upload by Analog Prophet

"Fender Rhodes 1973, with the RetroFlyer active preamp from Aviom Studios, containing EQ (mid 800hz +/- 7dB).
Fender Rhodes 1973 with RetroFlyer mod. The RetroFlyer mod from Aviom Studios is an built in pre amp with EQ (800hz +/- 7dB) and stereo tremolo. The sound examples are unprocessed straight to the computer.

1. Original sound without any processing before RetroFlyer was mounted.
2. RetroFlyer preamp mounted without any processing but with the built in EQ.
3. RetroFlyer preamp with EQ and built in stereo tremolo."

via Avion Studios

Goodbye flat, dull Rhodes sound - hello Retroflyer!

The Retroflyer is an active preamp with volume, mid boost/cut and fully adjustable tremolo designed to fit perfectly into passive Mark I and II Fender Rhodes. We wrote a huge blog post about it if you want heaps of info but here are the bullet points:

High-headroom, high-detail, low-noise preamp circuit
High input impedance with full frequency and dynamic range
On board 3-position high pass filter
7db Balanced Mid Boost/Cut
Twin VCA true stereo tremolo
Custom faceplate w/ custom dual concentric knobs (both made in the USA)
High quality, name brand components throughout
Extensive power filtering, power supply included
Complete kit installs in less than 15 minutes
1 year warranty with lifetime support
Designed, tested and manufactured by Avion Studios in the USA.
This design represents hundreds of hours of work and we honestly couldn’t be happier. It frankly sounds fantastic. The bass is full, the mids are clear and the highs shine.

See the Avion Studios label for more.

CLICK FOR MORE »

Northern Light Modular Animated Tricillator Model 2AT Modulated Drone Teaser

video upload by Kent

"It’s BIG! (2 panels wide, housing 3 VCOs and 8 LFOs!)

It’s feature rich! (12 VCAs, syncable & offset-capable LFOs of various waveforms, 4 optical clippers: 3 x each osc and one on Mix Out, 3 sub-oscillators, multi-waveform oscillator sync, and so much more.)

It’s the Northern Light Modular Model 2AT Animated Tricillator. https://northernlightmodular.com/prod...
This thing is nuts but also very well thought out. The master stroke is adding their Electric Dompteur H-Series module ( https://northernlightmodular.com/prod... )right on board. With so many modulation destinations, it makes perfect sense to add 8 syncable, freezable, offset-capable, and multi-waveform LFOs to complete the package and animate the entire show. Each LFO output also features its own attenuator, thus providing subtle movement as heard in this video.

I’m planning to do a full walkthrough of the module as soon as time allows."

Check for US availability at Noisebug.

Animated Tricillator – Model 2AT – Sifam

€ 1.800,00

Three syncable VCOs and 8 LFOs in one unit

The oscillators are built on the classic circuit used in the 80s by Roland, Sequential and others.
The new AS3340-HYP VCOs give us that silky smooth 80s feeling back again and take care of the pitch drift the classic CEM shows
It tracks fine over all 8 octaves..
All four waveform levels are CV controllable
There is a rotary switch for selecting the octaves, a 3-stage sub oscillator and a front panel jumper selectable Mod CV (0-10V) out , scalable FM and CV control and of course full PWM control , all attenuverted
The 2AT has the FM inputs normalled to the outputs of the other oscillators and the order can be changed on the back
The sync inputs can be connected with shorting bars to the adjacent mod outputs conveniently
The 3 separate oscillator outputs are mixed internally and are preset at the MIX OUT if no single out is used.
Optical clipping stages are present at OSC and MAIN stage

The left side of the module is a swarm LFO
One master frequency, set by a knob or an external input, is re-used 7 times with variations
The 8 frequencies can be offset in phase or frequency, always based on the master frequency.
It can go down to 0 Hz and freeze the levels at their present state
And every output can be adjusted directly at the output without the need for attenuators

There is also a shared pitch input with a 4 octave offset and level LED on the lower left side.
The upper left corner is the collective clipping and gain control.

US customers please check for availability at NOISEBUG

Electric Dompteur – Model hED v2 [additional posts]
€ 450,00

8 linked true zero LFOs
Sine, triangle, rising and falling ramps , square , pulsing and frozen random available

V2 offers new Midi clock sync multipliers and a MCU controlled phase/spread button

Offset in phase up to 180 degree
Offset in spread based on sub harmonics of the master frequency
Frequency range from 0 to 300 hz
8 Outputs can be adjusted from 0-10V individually
Cv controlled frequency up to 2x and down to 0hz

The h series modules require a h bracket to be mounted in a 1U space

Build to order

Exploring the Buchla ♫ ♫ │ Music and visual art

video upload by Luc Debeck

"5 years ago I had my first Buchla 100 custom built system. This was a live performance session at home.
This was my first attempt exploring the Buchla system and I still enjoy the sounds with my current system 200.
The Buchla consists of VCO 158, quad gate 110, Lpf 192, Wavewiper, CV processor 156, VC Delay, Mixer, Attenuator, Waveformer, Timbre 178.
AI Artwork (Midjourney) was done by me as well as the video composition and music."

HWJ - Perkons - PERfourMER MKII - Pro 3 - Deluge (Stranger Things Mix)

video upload by Makis Zeg

"I hope you like it :)"

Korg Mono/Poly w/ Tubbutec Mody/Poły MIDI Upgrade SN 371542

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Tubbutec Mody/Poly upgrade installed that adds midi in and out, sustain pedal input and a ton of extra features to this already awesome synth."

CLICK FOR MORE »

1977 Oberheim CPS-1 SEM SN 0211

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Stand alone unit with power supply. Voice can also be removed and placed in a TVS, FVS. Unit has been stored in a climate controlled room. Powers up fine. CVIN jack needs to be replaced. I was able to trigger the unit by holding the CVIN cable down making contact."

CLICK FOR MORE »