Tuesday, July 11, 2023
Winter Modular & Plankton Electronics Zaps Sound Demo (no talking)
video upload by Limbic Bits
0:00 IDM Sequence
0:59 Old School Percussion synth
2:15 Lousy finger drumming while exploring some preset banks
5:43 IDM Performance with Intellijel Atlantis
Oberheim Mini-Sequencer - Vintage Analog Sequencer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Additional Analog U.S Listings,
also on Reverb
"This one is in excellent condition and working 100%. It was removed from an Oberheim Two-Voice."
via this auction
Additional Analog U.S Listings,
also on Reverb
"This one is in excellent condition and working 100%. It was removed from an Oberheim Two-Voice."
Spectral Audio ProTone SN 960204
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"The ProTone is a true analog synth from the mid-nineties for the modern MIDI studio. It is monophonic and features two analog oscillators, a beefy resonant filter, flexible LFO, MIDI and CV/Gate control, and a simple intuitive hands-on layout with every control parameter accessible from the front panel knobs and switches.
Each oscillator features saw and pulse waveforms with independent waveform selection, tuning and level. White Noise is also available from VCO1. The oscillators can be sync'd and Ring Modulation can also be dialed in. The filter section allows for either high or low pass filtering and 12 or 24 dB/oct slopes with the usual cutoff and resonance knobs. A fairly standard ADSR envelope can be applied to the voltage-controlled amp, but there's only a decay envelope (Accent) for the filter. The LFO is quite flexible, with six wave shapes plus random, noise or external input. The LFO can be set to modulate VCO1, VCO2, Pulse-Width on VCO1, filter cutoff and panning. A few remaining controls include a Panner, and Slide (portamento) effect.
The ProTone features MIDI I/O and traditional CV/Gate I/O for use with vintage gear. A little too much like vintage gear, however, the Pro Tone does not have on-board program memory. But with such a basic synth architecture and no hidden menus or parameters, the ProTone is a hands-on tweaker's synth - full of fat analog bass and synth sounds with a squelchy filter and competent LFO. Additional features include external VCO and LFO inputs, MIDI controlled volume and frequency cutoff, velocity sensitivity, and stereo outputs. The ProTone makes a cost effective, reliable and unique alternative to many other older vintage dual-VCO analog mono-synths."
via this auction
"The ProTone is a true analog synth from the mid-nineties for the modern MIDI studio. It is monophonic and features two analog oscillators, a beefy resonant filter, flexible LFO, MIDI and CV/Gate control, and a simple intuitive hands-on layout with every control parameter accessible from the front panel knobs and switches.Each oscillator features saw and pulse waveforms with independent waveform selection, tuning and level. White Noise is also available from VCO1. The oscillators can be sync'd and Ring Modulation can also be dialed in. The filter section allows for either high or low pass filtering and 12 or 24 dB/oct slopes with the usual cutoff and resonance knobs. A fairly standard ADSR envelope can be applied to the voltage-controlled amp, but there's only a decay envelope (Accent) for the filter. The LFO is quite flexible, with six wave shapes plus random, noise or external input. The LFO can be set to modulate VCO1, VCO2, Pulse-Width on VCO1, filter cutoff and panning. A few remaining controls include a Panner, and Slide (portamento) effect.
The ProTone features MIDI I/O and traditional CV/Gate I/O for use with vintage gear. A little too much like vintage gear, however, the Pro Tone does not have on-board program memory. But with such a basic synth architecture and no hidden menus or parameters, the ProTone is a hands-on tweaker's synth - full of fat analog bass and synth sounds with a squelchy filter and competent LFO. Additional features include external VCO and LFO inputs, MIDI controlled volume and frequency cutoff, velocity sensitivity, and stereo outputs. The ProTone makes a cost effective, reliable and unique alternative to many other older vintage dual-VCO analog mono-synths."
Custom White Funkagenic Roland TB-303 Bassline Synthesizer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"TB-303 with Funkagenda modification
Blue LEDs
Kenton control possible (midi to cv) / Added controls with this mod: Slide, Acc, Filter, Gate, CV
Incl original TB-303 carry bag."
via this auction
"TB-303 with Funkagenda modification
Blue LEDs
Kenton control possible (midi to cv) / Added controls with this mod: Slide, Acc, Filter, Gate, CV
Incl original TB-303 carry bag."
Octave Cat | Cherry Audio
video upload by Cherry Audio
Introduction to Cherry Audio's Octave Cat - Hosted by Tim Shoebridge
video upload by Cherry Audio
Retropolis Pack For Cherry Audio Octave Cat
video upload by James Dyson
""Ready to unleash more ferocious power with the Octave Cat? With the Retropolis for Octave Cat preset pack, you can tap into the true potential of this beastly synthesizer and discover a whole mew world of sound. Created by masterful sound designer James Dyson, Retropolis offers 100 new presets showcasing the Octave Cat's impressive duophonic mode, dual-step sequencer, additional clawsome analog leads, brass tones, modern polyphonic sounds, and more. Not only does Retropolis offer a glimpse into the past, but it also instantly provides unique modern sounds for the music producers of today. Don't wait to pounce on this treat - add Retropolis to your Octave Cat synthesizer and start making truly fierce music today!"
Link to the Pack here https://store.cherryaudio.com/presets..."
Octave CAT by Cherry Audio - A detailed demo and tutorial
video upload by CatSynth TV
https://catsynth.com
Understanding the Octave CAT // Walkthrough of Cherry Audio's latest release
video upload by Starsky Carr
"Cherry Audio's Octave Cat is a virtual synthesizer instrument designed in collaboration with Carmine Bonanno, the original designer of the CAT synthesizer. The 1976 Octave Electronics CAT was an affordable alternative to expensive portable analog synthesizers of the day.
Adopt your Octave Cat today! https://cherryaudio.com/
Octave Cat retains all the growl of the original hardware's fat and savage duophonic sound and replicates the CAT's uniquely aggressive resonant four-pole 24 dB/oct filter. The Octave Cat feature set expands on the original with enhancements including 16-voice polyphony, sample and hold glide, and interchangeable skins.
A secondary panel view reveals dual eight-step classic-style sequencers and studio-quality effects featuring distortion, phaser, flanger/chorus, delay, and reverb. With support for MPE, over 300 expertly designed presets, and extensive MIDI mapping functions, Octave Cat will satisfy both vintage synth aficionados and professional modern music producers.
Octave Cat is provided in AU, VST, VST3, AAX, and standalone formats, and a free 30-day demo is available at https://cherryaudio.com/
macOS Requirements: macOS 10.13 or above. macOS 13 Ventura supported. 64-bit required. Native Apple M1 processor support, including Apple M1 Ultra. 3.4 GHz Quad-Core or M1 CPU with 8GB of RAM recommended.
Windows Requirements: Windows 7 or above (including Windows 11), 64-bit required. Quad-core computer with 8GB of RAM recommended.
Also available! Retropolis for Octave Cat Preset Pack (sold separately), featuring 100 new presets showcasing the Octave Cat's impressive duophonic mode, dual-step sequencer, additional clawsome analog leads, brass tones, modern polyphonic sounds, and more.
Octave Cat Features
- All aspects of the original CAT precisely modeled in exacting detail
- Over 300 presets
- Dual Panel Views with an authentic Main view for synthesis controls, and an additional FX/Seq panel with extended features
- Monophonic, duophonic, and polyphonic (up to 16 voices) voice modes
- Unison for mono and duo modes
- Two distinct VCOs with discrete wave, modulation, S+H, and sub octave settings; VCO1 with saw, triangle, and pulse with PWM, and VCO2 with square and saw waveforms
- Vintage-correct four-pole 24 db/oct filter, based on the original “cascaded OTA” SSM2040 filter with precise replication of The CAT’s unique resonance
A complicated 1980's kit to build a whole vocoder! POWERTRAN ETI VOCODER
video upload by LOOK MUM NO COMPUTER
"THE ETI POWERTRAN VOCODER
download sounds from this synth to use, here :-
https://www.patreon.com/posts/powertr...
https://www.patreon.com/posts/more-po...
https://www.patreon.com/posts/more-mu...
-------
SEPTEMBER 1980 ETI :-
https://worldradiohistory.com/UK/Elec..."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
