Noise Install in DIY Acrylic Eurorack Case

Published on Nov 22, 2015 miip999

"Installing A custom Noise module from ZA electronic in My Acrylic DIY eurorack case.

Modules used to the music
Make Noise:
DPO
Maths
Phonogene
Optomix
Wogglebug
René
Rosie

Mutable instruments:
Ripples

Doepfer:
A-199 spring reverb"

Note ZA Electronic was formerly Zebranalogic. I created a new channel for ZA moving forward.

New AtomoSynth TOTEM Eurorack Module

AtomoSynth TOTEM demo 1 Bass drums

Published on Nov 21, 2015 atomolab

"Hello world!! here some bass drum sounds made with the AtomoSynth TOTEM !!"

AtomoSynth TOTEM demo 2 weird sounds

Published on Nov 21, 2015

"Hello, in this video i made some weird percussive sounds with the AtomoSynth TOTEM module!!"

via Atomo Synth

"TOTEM
Analog percussion synthesizer eurorack module.

21 HP width
One VCO with triangle and square waveforms.
One LFO with square and triangle waveforms.
Two envelope generators, one with decay and level control wired to the VCO and one with decay control wired to the VCA.
White noise generator.
Audio input.
Tune input (positive voltage only. It modulates the VCO, it has not a V/octave scale)
Gate input.
Audio output."

New Grove Audio GSM712 Eurorack Dual Channel VCA

via Grove Audio

"The 6HP module designated GMS-712EU has two low distortion VCA based on the 2164. Each independent amplifier has simple controls including an attenuverter and an initial gain control. The channels are DC coupled so they will pass DC and can be used to scale control voltages.

The unit is housed in a 6 HP panel and is less than 40 mm deep. It also includes a switchable +5 V source so that it can be used with systems that don't have +5 V. on their power buses. MSRP will be $144.95."

New Grove Audio G294A Eurorack 4 Pole Low Pass Filter

via Grove Audio

"Following on the successful introduction of the GMS-294a 4 Pole Low Pass filter, a recreation of the Moog™ 904a 4 Pole Ladder filter, the filter has been repackaged in Eurorack format. Like the MU version, this module utilizes, as much as possible, the original component types, bringing the 'Moog Filter' sound to the Eurorack world.

The unit is housed in a 12 HP panel and is less than 50 mm deep.

The filter will be available as a complete kit for intermediate level kit builders or fully assembled and tested."

ROLAND Officially Introduces the SYSTEM-500 Analog Eurorack Modules by Malekko Heavy Industry

The Roland System-500 modules (manufactured by Malekko) are here. Links below take you to the individual pages on Roland's website. These modules are based on the original Roland System-100m and System-500 analog modules. Roland worked directly with Malekko on manufacturing the modules. They are Roland's circuits manufactured into modules by Malekko. It's awesome to see the Malekko M at the bottom of each module as a tribute.

512 DUAL VCO

"Based on the classic SYSTEM-100M modular synthesizer, the SYSTEM-500 is a fully analog recreation of one of the most revered electronic instruments of all time. Newly designed in Eurorack format, the SYSTEM-500 delivers the classic character and functionality of the original with the advantages of a modern instrument. Built in the USA and assembled in Japan, the SYSTEM-500 is made to exacting standards with top-quality components and solid controls. And it’s surprisingly affordable, turning the fantasy of finally owning this legendary instrument into reality.

The 512 Dual VCO (voltage controlled oscillator) is a single module consisting of two voltage controlled oscillators. Each independent VCO produces frequencies across a wide range with 1V/octave tracking and dedicated pulse, triangle, and saw wave outputs. Variable pulse width is available via panel control or CV modulation. Each oscillator’s frequency can also be synchronized to the other in weak or strong modes to achieve a unique 'sync' sound."

521 DUAL VCF

"The 521 Dual VCF (voltage controlled filter) module features two separate low pass filters for modifying the timbre of audio sources. Each filter has its own dedicated controls for frequency cutoff, resonance, and a fixed high pass filter with two switchable cutoff points. Audio and CV input mixers on each channel allow the blending of multiple audio signals and modulation sources."

530 DUAL VCA

"Based on the classic SYSTEM-100M modular synthesizer, the SYSTEM-500 is a fully analog recreation of one of the most revered electronic instruments of all time. Newly designed in Eurorack format, the SYSTEM-500 delivers the classic character and functionality of the original with the advantages of a modern instrument. Built in the USA and assembled in Japan, the SYSTEM-500 is made to exacting standards with top-quality components and solid controls. And it’s surprisingly affordable, turning the fantasy of finally owning this legendary instrument into reality."

540 DUAL ENVELOPE GENERATOR + LFO

"Based on the classic SYSTEM-100M modular synthesizer, the SYSTEM-500 is a fully analog recreation of one of the most revered electronic instruments of all time. Newly designed in Eurorack format, the SYSTEM-500 delivers the classic character and functionality of the original with the advantages of a modern instrument. Built in the USA and assembled in Japan, the SYSTEM-500 is made to exacting standards with top-quality components and solid controls. And it’s surprisingly affordable, turning the fantasy of finally owning this legendary instrument into reality."

572 PHASE SHIFTER + DELAY + LFO

"Based on the classic SYSTEM-100M modular synthesizer, the SYSTEM-500 is a fully analog recreation of one of the most revered electronic instruments of all time. Newly designed in Eurorack format, the SYSTEM-500 delivers the classic character and functionality of the original with the advantages of a modern instrument. Built in the USA and assembled in Japan, the SYSTEM-500 is made to exacting standards with top-quality components and solid controls. And it’s surprisingly affordable, turning the fantasy of finally owning this legendary instrument into reality."

ROLAND INTRODUCES SYR-E84 EURORACK CASE

"Durable Case and Power Supply for AIRA Modular Synths and Other Eurorack Gear

Los Angeles, CA, November 19, 2015 — Roland is pleased to introduce the SYR-E84 Eurorack Case, a rugged travel case and high-current power supply for modular synths and effects. The SYR-E84 fits the SYSTEM-500 series, SYSTEM-1m, BITRAZER, DEMORA, and other products in the AIRA Modular series, as well as standard Eurorack modules from other manufacturers.

From studio to stage, Eurorack-based modular synthesis has exploded in popularity around the world. As Roland’s first Eurorack case, the SYR-E84 delivers class-leading performance with a durable, lightweight design and a super-clean integrated power supply with high capacity for today’s power-hungry modules.

With its 84HP black aluminum enclosure and wood side panels, the SYR-E84 offers top-level looks and rugged reliability for all modular synth users. The 2000 mA DC supply provides stable, low-noise power that meets Roland’s discriminating quality standards, ensuring reliable operation in every playing situation.

The versatile SYR-E84 can be used in flat, angled or vertical positions, and it’s possible to latch the case cover to the back for extra stability when needed. In addition, the stackable design and included screws allow two SYR-E84 cases to be joined together, making it easy for the user to expand their setup over time.

Roland is also pleased to officially announce details for the five individual SYSTEM-500 modules. Part of the AIRA Modular series, these all-new, fully analog modules are based on two of the most revered electronic instruments of all time, the SYSTEM-700 and SYSTEM-100m. Designed exclusively for Eurorack, the SYSTEM-500 512 VCO, 521 Dual VCF, 530 Dual VCA, 540 2ENV-LFO and 572 Phase Shifter/Delay/LFO deliver classic Roland sound with all the advantages and reliability of a modern instrument.

To learn more about the SYR-E84, SYSTEM-500 series and other AIRA Modular gear, visit RolandUS.com."

CLICK FOR MORE »

O0O Eurorack Modules

BSDM (Bareback kick) & SCAT (0-logical distortion) from 000 on Vimeo.

"BSDM Bareback kick (BasSDruM) and SCAT 0-Logical Distortion
000 Percussion and Distortion Modules
http://0x0x0.porn"


SNORE FIST DRUM 000 Percussion & Distortion Modules from 000 on Vimeo.

"SNORE FIST DRUM
A reinterpretation of a snare drum by 000
000 Percussion & Distortion Modules"


BSDM (Bareback kick) & SCAT (0-logical distortion) from 000 on Vimeo.

"BSDM Bareback kick (BasSDruM) and SCAT 0-Logical Distortion
000 Percussion and Distortion Modules"


000 IS ABERRANT PERCUSSION AND DISTORTION MODULES

"BSDM BAREBACK BASS DRUM
155,00€

BSDM BAREBACK BASS DRUM

Our reinterpretation of the analog bass drum from the 80´s with a full sustain decay on the edge of the potentiometer for deep sound atmospheres and penetrating kick drum sounds.

Frecuency range 32Hz – 192Hz
Potentiometer Control: Pitch/Envelope/Decay/Envelope Decay/ Volume
Buttons: Whip (Trigger), Wave (2nd oscilator on/off)
Inputs: Trigger, Accent
Output : Audio
Voltaje: 5v-24v
Consum: 15mA +12V

2mm black soldermask panel, golden traces (ENIG), robust metal potentiometers, black knobs, custom light push buttons with black laser engraved logos.

All modules have a special opening discount till Friday 29th october (inclusive)."

CLICK FOR MORE »

O0O SN0RE Fist Drum Eurorack Synthesizer Snare Module

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is the snare drum in the 000 set.

An analog design for snare and sci-fi trepanant frequencies with an analog white noise level control.
The Snap potentiometer -Band Pass Filter- allows you to locate the sounds in the edges of reality.
Potentiometer Control: Pitch/Envelope/Decay/Snap/Noise/Volume
Button: Whip (Trigger)
Input: Trigger, Accent
Output: Audio
2mm black soldermask panel, golden traces (ENIG), robust metal potentiometers, black knobs, custom light push buttons with black laser engraved logos.
Designed by 000 on summer 2015."

Note this is the first 000 post. See here for a list of their modules.

Uoki-Toki Eurorack Modules

Note: Auction links are affiliate links for which the site may be compensated.

via these auctions

All but the first appear to be branded as Uoki-Toki modules. Uoki-Toki is known for circuit bending (Speak & Spell, Roland TR-626). I created a new Uoki-Toki channel label on the site for these moving forward.

TEMNEPATYPA 4LFO Eurorack Module Details:

"4 independent LFO's in 14hp.
MS-20 LFO clones.
Voltage: +-5 V (in Square mode +-10v)
Controls: Depth, Rate, Shape (Saw/Triangle/Reverse Saw)
Wave switch: Triangle / Square
Speed switch: Normal/ Hi / Low

Double check power connection before powering your system please.

I ship in 5 days after payment received. It requires 14-18 days for delivery as soon as item ships from Russia.

I ship anywhere in the world! Happy bidding!"

CLICK FOR MORE »

Make Noise System Concrète

Published on Nov 18, 2015 MAKEN0ISE

"System Concrète:

A small system devoted to capturing external sounds and sculpting them into new ones. The Phonogene operates as a recorder that also allows the artist to layer and rearrange the sound and manipulate the speed and direction of playback. The ECHOPHON brings pitch shifting, echo and when combined with the MMG filter, incredible smearing of the spectrum. The Wogglebug and MATHS work to animate these effects.
voltage controlled DSP (Digital Signal Processing)
Voltage Controlled Pitch Shifting and Echo: ECHOPHON
Voltage Controlled Granularization: Phonogene
Complex Random Voltage Generator: Wogglebug
Dual analog control signal generator: MATHS
Signal Distribution and fan out: MULT
Voltage controlled multi-mode filtering: MMG
3U case w/ power supply
Patch cables
Add a Rosie for $110, a discount of over 20%"

Expert Sleepers Disting MK3 Algorithms & Modes Demo Videos

Published on Nov 18, 2015 Expert Sleepers

Playlist:
disting mk3 - Parameters
disting mk3 - Tap Tempo
disting mk3 - Menus
disting mk3 - Switching Algorithms
disting mk3 - LP/HP Filter
disting mk3 - LP/BP Filter
disting mk3 - BP/HP Filter
disting mk3 - BP/Notch Filter
disting mk3 - Startup Sequence
disting mk3 - Knob Recorder
disting mk3 - Voltage Controlled Delay Line
disting mk3 - Resonator
disting mk3 - Phaser
disting mk3 - Tape Delay
disting mk3 - State Variable Filter
disting mk3 - New Feature Highlights
disting mk3 - Clocked Audio Playback
disting mk3 - Crossfade/Pan

Macro Machines Omnimod Eurorack Module

Published on Nov 14, 2015 Macro Machines

via Macro Machines

"limited edition preorder ships early 2016
Macro Machines presents an incredibly versatile new addition in the world of eurorack modules. The Omnimod will make a powerful new ally in your adventures through the universe of sound. Omni means all, and mod stands for modulation of control voltage.

Create unique new combinations of envelopes, LFOs and step sequences quickly and easily with the simple and intuitive waveform design interface. Centered around a crisp, high contrast OLED screen, the Omnimod provides vivid visual feedback for precise editing, as well as a scope mode to aid in configuring the inputs. This allows for deep, yet intuitive control over complex modulation sequencing. Endless possibilities become child’s play.

Once you have sculpted the perfect waveforms, you can store them for later, and recall them at any time in the future. You can also use the Macro Machines Storage Strip to allow multiple modules on the same power bus line to store and recall their settings at the same time, creating something never before possible in eurorack, instantaneous system wide storage and recall of entirely different configurations.

The Omnimod features:

– 4 powerful channels of LFOs, Step Sequencing, Envelope Generation and Envelope Following, in limitless combinations.
– user friendly interface with intuitive visual feedback.
– an oscilloscope mode to visualize input signals: fine tune the extraction of triggers, select different modes, and smooth or scale envelope following.
– full storage and recall of all parameters automagically before power cycling,
– user definable waves for reusing complex individual channel settings.
– 64 storable, recallable, sequence-able, and randomize-able presets
– only 14HP wide, packs loads of useful possibilities in a small space.
Located atop the beautiful OLED screen, there are four (4) inputs and four (4) outputs using the highest quality 1/8th inch jacks and four (4) eye catching white LED buttons that continually fade to show the output of each of the 4 channels. Below the screen are two encoders, the left encoder is stepped for parameter and point selection and the right encoder allows smooth parameter editing. This simple and quick to grasp control scheme will have you mastering this module quickly, manipulating and sculpting your own unique waveforms.

Settings are automatically saved between power cycles to easily resume where you left off. If used on the same power bus board as a Macro Machines “Storage Strip” module, several banks of settings can be stored, recalled and sequenced to allow even more possibilities from studio to stage.

The Concept:

Macro Machines first product, the Storage Strip realizes an entirely new method for complete patch storage and recall using the standard eurorack power bus board. When used in tandem with their second product, the Dynamic Destiny dual 4 to 1 switch router, entirely different patch cable routings can be saved and sequenced. You can, for example, create one setting with a deep analogue sub oscillator routed through a lowpass filter, and instantly switch this to be a complex high pitch FM oscillator through a spring reverb. This gives owners a new possibility to refine and explore vastly different sounds and come back to them in an instant.

Adding the Macro Machines Omnimod to the Storage Strip and Dynamic Destiny, the user could design an entire group of different settings using any modules they currenty have, and come back to them, refine, record different takes, perform and jam with quickly accessible, reliable start points."

Black Cat Goes Modular With Monster K-Fuzz Eurorack Module

Published on Nov 13, 2015 BlackCatPedals

"Black Cat announces debut Eurorack synth product
Black Cat Pedals is pleased to announce its first product for the Eurorack modular synth market - the Monster K-Fuzz module.

The Black Cat Monster K-Fuzz Eurorack module processes audio signals through a modified vintage fuzz circuit to create an array of harmonically complex tones and textures.

The brainchild of vintage synth collector Tom Hughes, the Monster K-Fuzz module has been adapted and optimized specifically for use with modular synthesizers.

In this context, the Monster K-Fuzz functions as a cross between a VCF and a wave shaper. The upper octave fuzz circuitry creates distinct overtones that traditional filters are not capable of. And even when fully overdriven, the Monster K-Fuzz sounds organic and warm - just what you'd expect from a great vintage fuzz.

Monster K-Fuzz module features:

* Variable controls for Saturation and Frequency
* 3-position selector switches for Clipping and Voicing
* Two separate Voltage Control Inputs
* Durable metalphoto finish 6HP panel
* Premium quality through-hole components
* Hand-built in the USA

The new Black Cat Monster K-Fuzz Eurorack synth module retails for $150. Check out www.blackcatpedals.com for further information about the company and their products."

Hexinverter Introduces the MUTANT SNARE

"Introducing the Hexinverter Électronique MUTANT SNARE!

This newest module in the Mutant Drum series brings dynamic snare drum synthesis to the eurorack format, with plenty of modulation and sound-sculpting capabilities to make it at home in the contemporary modular system.

Available from eurorack dealers all around the world this fall!

Stay tuned for video demos. For now, here are some audio demos created by our pal Dr. Snarold [above]

////MODULE DESCRIPTION////

From classic electro snares to warping, alien percussion, the Mutant Snare is a feature-rich departure from the static sounds of the 808!

=MIX and DRIVE=
• MIX lets you blend between the SHELL and SNAPPY tones that make up the overall snare drum
• turn up the DRIVE to get overdriven snare tones with intense harmonics. The purple LED indicates when the snare begins to overdrive
• like the other Mutant Drums, signal levels have been normalized for modular level input and output (up to 20Vpp)

=SHELL synthesizes the drum skins=
• analog bridged-t sinewave oscillators, for those organic-sounding tones we've come to love from the 808
• TONE control blends between the two sinewaves of different frequency
• SHELL PITCH lets you tune one of the sine waves, to change the pitch of your snare drum

=SNAPPY adds some noise to the snare=
• an analog white noise generator feeds the SNAPPY circuit
• an external input lets you patch any sound source you like into the SNAPPY generator
• voltage control of SNAPPY decay
• SNAPPY feeds into an analog selectable high-pass or band-pass filter
• voltage control of filter cutoff frequency
• when nothing is plugged into the cutoff CV input, the SNAPPY envelope OR the adjustable sinewave from the SHELL generator normalize through the CV attenuverter for cutoff CV. A jumper on the back of the module allows you to select which of these internal modulation signals are routed here
• filter has three resonance settings: classic 808 (low resonance), high resonance, and self oscillation
• bipolar attenuators (aka: 'attenuverters') on CV inputs"

Not seeing an image of the actual module on http://www.hexinverter.net/mutant-drums/ yet.

EMW - RANDOM PULSE 4X (first test)

Published on Nov 13, 2015 EMW

"The first test of our TRUE random pulse source module. It uses a very well balanced thermal noise source for the production of true random pulse sequences. It can be used in many ways in a modular system. One interesting way of using it is in together with our Analog Switch module for creating interesting and unexpected audio or modulation sequences."

http://www.electronicmusicworks.com/

Holland Synthesizer SM2014 Triple VCO Intro

Published on Nov 11, 2015 shirtgeek

"This is a quick intro to the Holland Synthesizer Model SM2014 Triple Voltage Controlled Oscillator."

This appears to be the first Holland Synthesizer post on the site. http://hollandsynth.com brings up an "Under Construction" site. I reached out to them and will report back with any info they'd like to share.  If you know anything about Holland Synthesizer, feel free to leave a comment or send it in. [Update2 2/4/16: The site is now live]

Update: some info in via Walter Holland aka shirtgeek: "The Holland Synth page is indeed under construction. Hopefully up in the next few months. Since all of our synths have been custom in the past, there was no need for a page. There is minimum info at walterholland.com engineer page."

New soundmachines UF1microfx Eurorack Module

"A simple, easy to use and fun effect processor with tap tempo input and cv control over fx parameters.

More info soon!"

MUTABLE INSTRUMENTS WARPS Vocoder Mode Testing

Published on Nov 11, 2015 SYNTH GURU

"Overview

Twists and warps two signals into one.

With a powerful digital core, Warps provides a collection of 6 modulation methods that can be continuously blended into one another: crossfading, cross-wavefolding, diode ring-modulation, balanced modulation (multiplication), XOR modulation, and waveform comparison/doubling. Each of these algorithms has a voltage-controlled timbre parameter, providing a variable level of tone coloration - from slight and sweet to harsh.

In addition, Warps provides a 20-band vocoder, with control over the envelope followers' decay time and the "warping" of the formants.

Before being processed, the two input audio signals are gain-controlled - with a linear and clean curve degenerating into analog-like saturation at the far end of the CV input range.

Warps can replace its first channel (carrier signal) by an internal oscillator, with sine, triangle, sawtooth, vocal buzz or noise waveforms.

Features

Continuous morphing between 7 cross-modulation algorithms: crossfade, cross-folding, digital model of analog diode ring-modulation, digital ring-modulation, bitwise XOR modulation, octaver/comparator, 20-band vocoder.
Control of timbre richness/brightness.
Each audio input has a built-in digital VCA with emulation of analog soft-clipping.
Audio input 1 can be replaced by an internal digital oscillator with through-zero FM. Available waveforms: sine, triangle, sawtooth, pulse, filtered noise.
Controls

Modulation algorithm morphing.
Timbre richness.
Input gain/distortion for audio inputs 1 and 2.
Internal oscillator on/off state, and waveform.
Inputs and outputs

Audio input 1 (carrier) level CV (or internal oscillator 1V/Oct CV), -1V to +8V.
Audio input 2 (modulator) level CV, -1V to +8V.
Modulation algorithm morphing CV, -5V to +5V.
Timbre CV, -5V to +5V.
Audio input 1 (or internal oscillator through-zero FM). Modular level expected (up to 15 Vpp).
Audio input 2. Modular level expected (up to 15 Vpp).
Cross-modulated signal output.
Auxiliary output: internal oscillator signal (when enabled) or mix of inputs 1 and 2 (post digital VCA).
Technical characteristics

Input impedances: 100k.
AD/DA: 16-bit, 96kHz.
Internal processing: 32-bit floating point, 576kHz (32kHz for vocoder).
Open-source hardware and firmware.
Easy firmware updates through an audio interface.
Cortex-M4 ARM processor.
10-HP.
Current consumption: +12V: 110mA ; -12V: 5mA.
110 mA +12V
5 mA -12V
0 mA 5V"

Endorphin.es STRONG ZERO VCO Core

via @analogzone

"Endorphin.es expands their Furthrrrrs with more FM capabilities w/ new STRONG ZERO VCO core!"

"The new digital STRONG-ZERO Voltage Controlled Oscillator Core expands the frequency modulation possibilities for any Furthrrrr Generator to an entirely new level.

I'm your Furthrrrr!
not this shit again

• Instant thru-zero linear FM for your Furthrrrr Generator

• 16-pin DIP IC chip – VCO сore replacement that works with any Furthrrrr Generator

• Expands Furthrrrr Generators FM capabilities for obtaining new timbres – deeper, metallic timbres, entirely new sphere of sounds from light whistles to weird noises.

• Band-limited 12 bit resolution 80 kHz samplerate triangle and square waves generation. The waveshaper and folder remains analog.

• Together with Terminal, the Furthrrrr creates a powerful 2-operator modular FM-synth.

• 16 bit pitch CV and linear FM acquisition for proper microtuning and modulation operations.

• Hard and soft sync without aliasing as may be expected from stock Furthrrrr oscillators

• Hits the stores this fall in love."

The Harvestman Black Locust 4-channel Guitar Adapter for Eurorack Now Available

via @analoguezone

"Black Locust is a 4-channel guitar effects pedal adaptor for your synthesizer.

This module is a re-release of the old, hand-built “STILTON ADAPTOR” module with a smaller panel size (16HP) and more expansion options.

Using a compact arrangement of TRS insert sockets (cables not included), Black Locust properly attenuates and amplifies signals to incorporate your guitar effects into the modular system. A return gain control and a wet/dry mix knob condition the effected signal for maximum utility in a modular context. Instruments such as electric guitars and basses can also be patched directly into the module.

Black Locust is the first of three modules in the FEEDBACK CONSOLE series. With no external input signals, the four pedals can operate in a closed feedback loop, self-generating audio signals that are impossible to directly control - only influence.

This module is a gateway to this highly experimental patching technique. Further modules in the FEEDBACK CONSOLE series include a matrix mixer and programmable quad VCA/envelope follower/signal router, each designed to expand the Black Locust for deeper exploration of the feedback technique.

You will quickly discover sounds that you will never hear again."