MATRIXSYNTH: Wagner & Hugget

Showing posts with label Wagner & Hugget. Show all posts
Showing posts with label Wagner & Hugget. Show all posts

Saturday, May 01, 2021

Jasper Wasp Clone DIY Synthesizer PCBs

via this auction

"The remaining parts need to be ordered and a build guide & parts list for ordering from Mouser / Digikey / etc. can be found at

*ONLY the PCBs and a few of the harder to source parts are included in the kits from Jasper, everything else has to be ordered on the assemblers end*"

Sunday, April 11, 2021

Jasper EDP Wasp Synth Clone DIY Kit

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Included in this kit as bought from the manufacturer are the main PCB, panel PCB, switched pots, IC, trimmers kit, sockets kit, MIDI PCB and programmed MCU.

To complete the synth you will have to add various basic components such as resistors, capacitors, semiconductors, pots and knobs. There are various options for building a case, from DIY woodwork to 3D printing.

All information about the Jasper is on the website at"

Wednesday, May 27, 2020

Jasper, Matriarch et un soupçon de BigSky...

Published on May 27, 2020 Laurent Baloran

"Jasper midifié (bidouille maison) et boutons en place, la guêpe est habillée.
L'étendue du clavier du Jasper et donc étant limité (3 octaves), j'ai mis en place un renversement automatique bien pratique pour avoir en midi une plus grande étendue sans interruption, ainsi que la (dé)sactivation automatique du midi pour jouer avec le petit clavier intégré.
J'aime vraiment bien le son de la guêpe, ainsi que son ergonomie sommaire mais suffisante."


"Midified jasper (homemade hack) and buttons in place, the wasp is dressed.
The extent of the keyboard of the Jasper and therefore being limited (3 octaves), I set up an automatic reversal very practical to have at noon a greater extent without interruption, as well as the automatic (de) deactivation of the midi to play with the small integrated keyboard.
I really like the sound of the wasp, as well as its basic but sufficient ergonomics. "

Monday, May 25, 2020


Published on May 25, 2020 Laurent Baloran

"Premiers pas avec la guèpe JASPER, clone du Wasp, en version noknob :D :D
Elle déménage bien. Quel drôle d'instrument ! Peu de commandes, mais l'ensemble est plaisant. Et le son, aussi gros que Lo est vraiment intéressant.
J'aime le filtre que vous allez un peu entendre ;)
Le tout passe juste dans le Hall de la BigSky...."

Wednesday, March 11, 2020

Ruby2 riffs

Published on Mar 11, 2020 Vykaar Tones

"Another jam in the style of my favourite electronic group. GRP R24 sequences Arturia Minibrute 2S. Jasper Wasp clone, Mellotron Micro, Korg Microsampler, Waldorf Sreichfett, Korg Triton Extreme, CR8000 drums, Mutant bass and snare."

Thursday, January 16, 2020

Jasper Wasp Diy Build (EDP Wasp Clone)

Published on Jan 16, 2020 Uros Stojnic

"Easy and straightforward build.
All music and sounds in the video created by Jasper only. No heavy processing except pad sound (no mixdown nor master)."

Wednesday, January 08, 2020

Is Behringer's WASP Deluxe a Clone of a Clone?

Thought this was interesting. Take a look at the front panels.

The top is the original EDP WASP Deluxe.

The middle is the Jasper clone.

The bottom is the Behringer WASP Deluxe.

Note the knob layout for each.

Clone of a clone? Depends on the internals. Reminds me of the original Technology Transplant (Cyclone Analogic) TB-303 and x0xb0x clones - see this post. This is also worth a read.

Update: Note the ENV hold switch, ENH waveshape in the oscillator section, and Noise level knob on the Jasper & Behringer clones. They are in the exact same locations yet completely absent on the original. These were introduced in the Jasper.

Monday, November 11, 2019

Wood Cased Jasper EDP Wasp Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This powerful analog synthesizer is a recreation of Electronic Dream Plant’s 1978 cult favorite, the EDP Wasp. Nothing quite compares to the analog tones produced by this monstrous machine. From leg-quivering rumbles in the industrial realm to the pulsing LFO’s of techno, this thing can take you to the ambient landscapes of tomorrow or even the lead solos you crave on your prog rock group.

It is encased in a custom wooden case that used Moog as an inspiration. It will come with a top board that is fastened to the unit and serves as a wooden briefcase, nifty for rolling out of a gig and into the night.

Some issues with the unit: it was built from the ground up. So the knobs aren’t quite calibrated to be the exact degree where the markings say are, for example, square wave or triangle wave. On the filter section, the knob goes right in the middle of each of the markings instead of right on the dot. The bottom right knob is fully functional but for some reason swings to the right in an overt manner (it goes past the delay marking). The top right of the unit where in the input and output are is kept in place by a single nail. A while ago it popped out but I popped it back in. Worst comes to worst, some glue oughta do.

Everything is fully functional."

Saturday, November 02, 2019

Jasper Wasp Clone Analog Synth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Jasper Wasp Clone Analog Synth. Non Midi. Just built ready for first owner. 2 DCO’s triangle, square, pulse width..."

Monday, July 15, 2019

Half Blood Thunder Moon Caravanserai

Published on Jul 15, 2019 Vykaar Tones

"Improvised sequences with an eastern feel composed after watching this unusual looking full moon out of my window. First synth heard are the kassutronic modules sequenced by a darktime sequencer with glide added by the frequency central trans europa module. Next is the Jasper synth going through the tau pipe phaser and being sequenced by the per|former sequencer midi out to a kenton pro-kadi to wasp interface. The higher note sequence is the boomstar 4075 controlled by cv and gate from the per|former sequencer. Cr8000 drums and mutant bass and snare triggered from doepfer A-157-1 and Vermona random rhythm. Low bass notes from DoepferDark Energy MK1 and maq16/3. Vocal sound is from the Roland V-Synth."

Sunday, April 28, 2019

The return of the potato synth cam

Published on Apr 28, 2019 vinyljunkie07

"The return of the potato cam and a cameo appearance with Sam Nolan :D

If you wanted polished paid for biased content, go watch TV"

Studio tour with Jasper, Behringer D, Jen SX1000, Korg Minikorg 2, Yamaha DX-100, KORG MS20, Roland Alpha Juno, & Ensoniq EPS.

Friday, December 07, 2018

Jasper Wasp clone hybrid analogue digital mono synth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Jasper Wasp clone. 2 octave mono synth 2 x DCO’s each with SAW, SQUARE and ENHANCED PULSE WIDTH waveforms. EXT audio in. Non midi. Easily upgraded to midi using one of midi kits available. Custom yellow side cheeks one offs"

Tuesday, August 28, 2018

Jasper Wasp Clone w/ Yellow Desktop Side Panels

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Jasper wasp clone. All analog filters. 2 DCO’s. midi in midi out. 2 octave keyboard."

Tuesday, July 17, 2018

Jasper EDP Wasp Clone

Published on Jul 17, 2018 KlangGenerator

"Just a simple performance with my DiY Jasper Synth and a 606. The Jasper has MIDI IN and OUT and the custom case is made of acrylic and 3d printed parts. The 606 is connected to the EXT IN of the Jasper."

Wednesday, June 13, 2018

EDP Wasp clone Jasper demo

Published on Jun 13, 2018 Vykaar Tones

"Just finished building this excellent synthesiser.
Jasper is a DIY clone of the EDP Wasp synthesiser from the late 1970s and early 1980s."

Friday, April 13, 2018


Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Hand built from DIY kit to a very high standard, not getting much use so moving it on.
*Note this doesn't have the midi option.

Fantastic monosynth clone of the legendary lectronic Dream Plant synth the 'Wasp' by Chris Huggett."

Friday, March 30, 2018

Jasper Synthesizer EDP Wasp Clone

Published on Mar 30, 2018 vinyljunkie07

"A DIY clone build of the 1978 EDP Wasp, it's pretty much 99.5% a Wasp.
Just some random noodling after I put it together.
From 7.13 it's totally dry with no FX

I've not made a case for it yet or fitted MIDI"

Sunday, February 18, 2018

Jasper / TOM noodling

Published on Feb 18, 2018 Altitude909

"New Sequencer code workout"

Sunday, January 28, 2018

Jasper Synthesizer Wasp Clone Midi CV GATE AC Adapter

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Jasper Synthesizer Wasp Clone Midi CV GATE AC Adapter panels and pcb's from jaspersynth in the UK
Just built 2 of great synths. Tested calibrated works great and sounds amazing.
Built with top quality parts from Digikey and Mouser electronics.
Comes with all as seen in the pictures.
USA and Canada Buyers ONLY"

Monday, January 08, 2018

Jasper EDP WASP Clone

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

See this post for a video demo of one.


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.