MATRIXSYNTH

Vintage Roland System-100 103 Mixer

Note: Auction links are affiliate links for which the site may be compensated.

SNIGGLEFRITZ 0.5 MIND DESTROYER by C.U.I

Note: Auction links are affiliate links for which the site may be compensated.
Published on Sep 18, 2018 CRUEL & UNUSUAL INSTRUMENTS

via this auction

"6 Oscillators chop, mangle, and blend oscillating voltages sent to another voltage controlled oscillator. Switchable outputs from pre VCO to VCO input out. 3 Leds show the state and speed of the gates that chop, blend and send the input to the VCO. The VCO has an input and range control for twisting and modifying the output and input of the VCO! confused? just watch the video!!!! ENJOY"

CLICK FOR MORE »

Rings ma Bell

Published on Sep 18, 2018 Ebotronix

Doepfer: A198 Ribbon Controller , A 174-2 Wheels
Flame: Tame Machine
Intellijel: Polaris
Make Noise: Case, LXD, Maths, Optomix, Telharmonic
Meris Mercury 7
Mutable Instruments : Plaits²
Tunefish Modular: Clouds, μClouds, Rings, μRings,Peaks, Veils, Warps
Ornament and Crime
Sputnik Modular: Oscillator
XAOC Praga
vid # 1780

Live Granular effect in MaxforLive based on Mutable Instruments Clouds

Published on Sep 18, 2018 Bálint Baráth

"GrainCloud, a MaxforLive device based on mdeGranular~. It models the Mutable Instruments Clouds eurorack modul with some extra features.

You should first set the maximum voices you want to use then set how much voices the left and right channels will use during your performance. Except the tuning list you can set all parameters for left and right channels separately.

You can download it through this link:
https://drive.google.com/open?id=1hJ6...

Thanks for Michael Norris and Olivier Gillet!

The track was made in Ableton Live 10 with Arturia soft synths and some custom effects and audio units.
The video was made with Screenflow."

New Vector Hardware Desktop Synthesizer In the Works

Published on Sep 18, 2018 Vector

Update:

I took a closer look at the video and the image to the left. It looks like the Orbit and Suborbit controls are for the vector portions of the synth engine. If you are not familiar with vector synthesis, it was introduced with the Sequential Circuits Prophet-VS. That tech made it to the Yamaha SY22 and TG-33, and finally the KORG Wavestation. In short, you have four oscillators that you can morph between with either a joystick or a modulation source. The Orbit and Suborbit controls appear to be the modulators as you can see on the screen. It's similar to being able to record and playing joystick movement on the SY22 and TG33. It's also similar to the paths in Moog's Animoog app.

Below is a list of controls I spotted in the video and the image. If I missed any, feel free to leave a comment. Note Vector synths typically have four oscillators. The screen in the video only shows two, so we will have to wait and see. You can see the synth features overdrive, reverb, delay, and chorus effects. There is also an arpeggiator and audio iput.

Update2: grabbed a screen of the quick front panel flash in the video. Click on it to zoom in a little. You should be able to read most of the controls.

CLICK FOR MORE »

DSI Prophet Rev 2 & Strymon Mobius

Published on Sep 18, 2018 3rdStoreyChemist

Tangerine Dream at Union Chapel

Published on Sep 18, 2018 Resident Advisor

"View the feature on RA: https://www.residentadvisor.net/featu..."

Some synth spotting with Tangerine Dream. Moog, Roland, soft synths, and eurorack. I think I spot a Manikin Schrittmacher sequencer in the rack.

Groove Rider GR-16 - The TECHNO SESSIONS Bank IAP Demo for the iPad

Published on Sep 18, 2018 thesoundtestroom

https://www.patreon.com/thesoundtestroom

TEST SERIES PART 1 Tiptop Audio Z-DSP Roland VG-99 Guitar Synth Eurorack

Published on Sep 18, 2018 Outsider Sound Design

"PART ONE
Tiptop Audio Z-DSP with Roland VG-99 Guitar Synth.
Cards used in this video are Time Fabric, Halls of Valhalla, Bitrot, and Dragon Fly 2.

The purpose of “TEST SERIES” is to focus on the sound design possibilities of various gear combinations when pushed to the extremes. This series is not musical nor does it serve as an instructional video. It is all about sound potential.

Please consider supporting this channel by purchasing a sample pack or music download from www.outsidersounddesign.com"

SOLID OAK ARTURIA KEYSTEP STAND WITH ADDITIONAL SHELF

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

I need one of these for my lap. Curious of the balance would be right.

"This stand has been precision machined to give a snug fit for the Arturia Keystep.

The keystep sits in a recess to stop it from moving or sliding, gripped by the sides this forms a strong and sturdy stand for your Keystep.

The Oak has been oiled and is ready to assemble and should stay looking beautiful for a long time.

NOTE: you must buy your own Arturia Keystep and all other synths as all you will get is 2 wooden cheeks, cross bar, shelf, screws, allen key and rubber feet."

CLICK FOR MORE »