Monday, January 10, 2022
Genesis Tonight Tonight Tonight COVER (extended version) with hardware synthesizer & NI Maschine
video upload by Sean Christopher Evoking Emotion with Synthesizers
"Tonight Tonight Tonight by Genesis is one of my favorite tracks from my teenage years in the 80's, so I knew I'd eventually have to cover it. This track was definitely the most work I've ever done for an 80's cover for sure. The hardware synths that I used for the piece are by Sequential, the Pro 3, Prophet 12, OB-6, and the Prophet 10 rev4. I also used The River by Baloran, a 002 by Modal Electronics, a Quantum by Waldorf, and finally the Super 6 by Udo Audio.
This cover took me several months, as my left arm is still not functioning right, and with daily pain still due to my Fed-Ex truck versus Sean accident back in late 2019, but luckily I'm leaning somewhat to work through the pain and discomfort...although more slowly than before unfortunately."
Doepfer R2M - Ribbon Controller and Control Unit SN 270043
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"R2Ms are discontinued and rare. Includes a manual but not a power supply (any generic 9VDC 250MA center pos PS will work)
Includes connecting cable (note this looks like a male to male USB cable but the instructions are VERY clear to NOT plug this into a USB adapter)
Key feature is that the ribbon and control unit send MIDI and CV out for location and pressure.
The ribbon controller can cover 1 octave, 2,3,4 or 5 octaves
It can store and retrieve 16 presets
It offers 16 different quantizations\ settings to different scales
It has a Trautonium mode allowing pitchbend around 1 starting note and sliding pitch up or down up to the pitch bend range of you MIDI device
It has an arpegiator spanning one or several octaves
R2M is a ribbon controller that generates control signals by moving a finger on the game manual . The data are output simultaneously as midi signals and as CV / gate control voltages. The R2M is thus able to control midi equipment as well as CV / gate-based devices (e.g. analog synthesizers or analog module systems). R2M stands for R ibbon to ( 2 ) MIDI.
This is used electronics, tested and non returnable. Only warranty is that it won't arrive DOA. Will ship tracked and insured.
R2M consists of two parts: the ribbon bar and the control unit .
Ribbon bar is a 50 cm long position sensor and a pressure sensor underneath. The control unit converts the data supplied by the manual (position of the finger and pressure) into appropriate midi commands or CV / gate voltages.
Here are the most important features of the R2M :
Very precise and sensitive position sensor (length 50 cm) that is activated by simply placing your finger on it
sensitive pressure sensor under the position sensor
Solid metal frame (interlaced double-U profile), painted silver-gray
Several M3 internal threads on all sides (e.g. for fixing to a surface, combined assembly of several manuals, attachment of a shoulder strap, etc.)
Dimensions: approx. 600 L x 30 W x 18 H (dimensions in mm)
Connection to the control unit via 4-pin cable (identical to USB, but no USB function!)
Connection cable
precise and sensitive position sensor (length 50 cm) that responds even to light finger touch
sensitive pressure sensor located below the position sensor
measures: about 600 length x 30 width x 18 height (measures in mm)
connection to the control box via 4-pin cable (same as used for USB connections but no USB function)"
via this auction
"R2Ms are discontinued and rare. Includes a manual but not a power supply (any generic 9VDC 250MA center pos PS will work) Includes connecting cable (note this looks like a male to male USB cable but the instructions are VERY clear to NOT plug this into a USB adapter)
Key feature is that the ribbon and control unit send MIDI and CV out for location and pressure.
The ribbon controller can cover 1 octave, 2,3,4 or 5 octaves
It can store and retrieve 16 presets
It offers 16 different quantizations\ settings to different scales
It has a Trautonium mode allowing pitchbend around 1 starting note and sliding pitch up or down up to the pitch bend range of you MIDI device
It has an arpegiator spanning one or several octaves
R2M is a ribbon controller that generates control signals by moving a finger on the game manual . The data are output simultaneously as midi signals and as CV / gate control voltages. The R2M is thus able to control midi equipment as well as CV / gate-based devices (e.g. analog synthesizers or analog module systems). R2M stands for R ibbon to ( 2 ) MIDI.
This is used electronics, tested and non returnable. Only warranty is that it won't arrive DOA. Will ship tracked and insured.
R2M consists of two parts: the ribbon bar and the control unit .
Ribbon bar is a 50 cm long position sensor and a pressure sensor underneath. The control unit converts the data supplied by the manual (position of the finger and pressure) into appropriate midi commands or CV / gate voltages.
Here are the most important features of the R2M :
Very precise and sensitive position sensor (length 50 cm) that is activated by simply placing your finger on it
sensitive pressure sensor under the position sensor
Solid metal frame (interlaced double-U profile), painted silver-gray
Several M3 internal threads on all sides (e.g. for fixing to a surface, combined assembly of several manuals, attachment of a shoulder strap, etc.)
Dimensions: approx. 600 L x 30 W x 18 H (dimensions in mm)
Connection to the control unit via 4-pin cable (identical to USB, but no USB function!)
Connection cable
precise and sensitive position sensor (length 50 cm) that responds even to light finger touch
sensitive pressure sensor located below the position sensor
measures: about 600 length x 30 width x 18 height (measures in mm)
connection to the control box via 4-pin cable (same as used for USB connections but no USB function)"
3 levels of sequencing with the Befaco Muxlicer
video upload by Omri Cohen
"Here are the VCV patch files - https://patchstorage.com/3-levels-of-...
00:00 - Introduction
00:29 - Endless sequences
06:22 - Sequencing audio
11:30 - MEX
16:07 - Bonus"
"Want to learn Modular Synthesis? have a look here - https://bit.ly/learnmodular
Do you also think that reverb is life and want to share it with the world? Have a look here - omri-cohen.creator-spring.com
If you just want to buy me a coffee :) - https://www.buymeacoffee.com/omricohen
Consider joining me on Patreon - https://www.patreon.com/omricohen
Patching techniques and ideas document - https://bit.ly/3o1Q3Sg"
Hardware Jams Weekly Challenge - D min,128bpm
video upload by SynthAddict
"Quick little 'all MicroFreak' jam using a TheoryBoard for control, Doctor A for FX, and RC-505 looper to assemble...
Made in D min at 128 bpm."
Synth Addict
Torso Electronics t-1 - TubeOhm Jeannie - Norand Mono - Novation Circuit Rhythm / SequencerTalk Jams
video upload by SequencerTalk
"Everything is sequenced with the Torso Electronics t-1 and the drum sounds on the Novation Circuit Rhythm are quickly sampled from the Norand Mono.
This wonderfull TubeOhm Jeannie drone pad is sequenced by the t-1 with 4 different Tracks and everything is mixed on the 1010Music Bluebox."
Roland SH-32 Synthesizer unboxing (kind of…) in 01/2022 (32 voices 4-part multitimbral synthesizer).
video upload by Ascetic Wires
"Unboxing (kind of...) of mint Roland SH-32 Desktop Synthesizer (32 voices 4-part multitimbral digital synth) with:
Original Box
Printed Manual
Original Power Adapter
Ascetic Wires nº182 YouTube Video
Recorded on a Q2n Zoom Handy Video Recorder (Video + Audio from Roland SH-32 Desktop Synthesizer).
Photo & Video Credits: Ascetic Wires
Thanks for watching"
Eurorack Modular Synthesizer + Cassette Tape
video upload by Wac- Lounge
modular boxes. simple and great concept. a couple more:
Qu-Bit Chord V2 Organ-Like Sound Ambient / Seq Switch Voltage Block Nebulae Rings Beads
Rings + MATHS + Ensemble Oscillator Ambient / Voltage Block Tides System100
Diverse Timbres
video upload by Todd Barton
"a silly little experiment . . . diverse timbres and modulations"
https://www.patreon.com/synthtodd
How to complex lfo W. Plinky & expandeur
video upload by Meska
"Here a quick tips for building complex modulation with plinky and the expandeur ;)
Thank you for watching.
My name is Meska of the statik collective . I've been making mostly "dark and expérimental" music for more than ten years now, i'v learn so much online, now it's time for me to share my knoledge, my exploration and this channel is a place to talk about the tools, sound design and techniques to make music with. i'm tattooist at day jobs and you can found my work here : www.meska.fr
You can stream my albums and EPs at https://statikwave.bandcamp.com/ or on the official YT page.
If you'd like to support the channel consider buying music from bandcamp ;)"
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
