MATRIXSYNTH


Monday, July 31, 2023

7/31/23 Metasonix RK8 Filterwall + SSL 1660 + MooSonics Vanilla VCA/Envelope + PCM 70 (gated plate)


video upload by Cfpp0

"A maiden voyage into the latest glory hole from Metasonix."



via Metasonix

"The RK8 contains six bandpass filters, which use vacuum tubes. They are simple 'twin T' designs. Each filter is about one octave lower in range than the one to the left—treble on the left, bass on the right.

Each filter may be manually swept with its own separate tuning knob, over approximately one and one-half octaves. Or ALL the filters may be swept together, using either the 'MANUAL TUNE' knob, or the CV input, which overrides the knob when a patch cable is inserted. Although it is capable of some conventional swept-filter effects, the RK8 is more useful as a complex equalization system or for unique special effects.

Resonance is separately adjustable for each filter. Usually the treble filters will resonate strongly and oscillate under some settings. The bass filters might not. It’s a strange monster.

Inputs and outputs are compatible with all Eurorack and other modular synthesizer equipment. The output peak voltage is limited to the supply rails and can’t damage other modules.

Don’t assume you know what you are getting here—the RK8 is unlike anything else ever marketed. Also don’t expect it to track VCOs. Its voltage-to-frequency curve is 'more or less' hertz-per-volt but can’t really be guaranteed. The six vactrols in each RK8 were hand-matched, but can’t be expected to remain matched, or to track together perfectly.

Again, everything about the RK8 is abnormal. It is not perfectly 'clean' and perfectly 'distortionless', and it cannot be made so. Because it uses vacuum tubes.

It is something you have NEVER seen before. It can NOT be compared to any other product, ever made, PERIOD. Do not walk into this with 'preconceptions'.

Specs: 32HP width Eurorack module, with circuits protruding about 1.5″ or 38mm behind panel. The RK8 uses six 5702 subminiature pentodes, all Raytheon US military surplus from the 1980s. Power supply required is about 600 mA after warmup and 1.4 amps when started cold from +12v, and 10 mA from -12v. Low-cost power supplies are NOT recommended. A spare tube is included, although soldering equipment is needed to replace any of the tubes. They are run very conservatively and will last many, many years."

Metasonix RK8 Filterwall Demonstration 1 SD 480p

video upload by Endmusik Records

"Metasonix RK8 Filterwall prototype demo - video 1.

Modules used: Hexinverter Mutant BD9, Mutant Snare, WMD Crater and Kraken, Moog DFAM, and some live percussion samples from the 1010 music Bitbox.

This is an un-edited 13 minute session of experimentation with direct audio recording to showcase the tonality of the prototype as it processes these sounds. When audio stops and comes back in that is me bringing up a separate mixer channel of the raw audio unfiltered as a comparison, which is then muted out and the RK8 direct channel is brought back in."

Metasonix RK8

video upload by The Mephitif

"Some examples of the Metasonix RK8 Filterwall. First clip is of the Industrial Music Electronics Hertz Donut MK3 running through the Filterwall. Second clip is the Filterwall acting as a sine bank. Third clip is some bad drumbeat being processed through the Filterwall."

Yamaha CS-30 / Dolby 361 with Vocal Stressor mod AKA the Dolby trick


video upload by HanzVolt

"Yamaha CS-30 in Stereo passing thru Stereo Dolby 361 with Vocal Stressor Mod
My buddy @JMLRecording mods the Dolby boxes and sells them!! Once you hear a synth thru a Dolby box with the 'Dolby Trick' you will be hooked!"

Sequential Trigon-6 - Synth Exploration


video upload by Kraft Music

"Find exclusive Sequential Trigon-6 BUNDLES at Kraft Music:
https://www.kraftmusic.com/brands/seq...

Adam Berzowski explores the sounds of the Sequential Trigon-6 at the Kraft Music studio

Contact Adam directly at 414-858-4008 or aberzowski@kraftmusic.com if you have any questions or would like to place an order on your very own Trigon-6

00:00 - Intro
01:41 - Effects
03:35 - Oscillators
05:40 - Unison mode
07:16 - More effects
09:12 - Making a ripping lead
11:01 - Presets
11:57 - Arpeggiator
14:39 - Overview of the control panel
18:42 - More exploring
22:22 - Outro

The Sequential Trigon-6 is a polyphonic take on the classic, thick and creamy, 3-oscillator-plus-ladder-filter analog sound that defined the dawn of the synth era. This bold and familiar, genre- and style-bridging sound has now been refined and redefined with Sequential's own modern imprint. More than the sum of its parts, Trigon-6 packs 6-voice polyphony, unrivaled playability, easy programmability, and a studio-quality dual effects section into a four-octave, semi-weighted keyboard with velocity and channel aftertouch. To give even more classic organic warmth to an already classic synth, the Vintage Knob is adjustable from subtle to extreme to emulate the stability of a perfect modern instrument or a time-worn relic.

Get more for your money with an exclusive Sequential Trigon-6 polyphonic analog synthesizer bundle from Kraft Music. These package deals include the accessories you'll need to get the most out of your new poly synth, all for one low price. If you have any questions, please contact us. Our knowledgeable sales advisors will be happy to assist in choosing the bundle that's right for you!"

BLUSH RESPONSE - LAYER - ASTROGENIC HALLUCINAUTING


video upload by thenoiztemple

"072923
Live performance at 807 William St - Houston, TX

00:00 ASTROGENIC HALLUCINAUTING - http://manipulate.net/
42:16 LAYER - https://layer.bandcamp.com
01:41:25 BLUSH RESPONSE - https://blushresponse.bandcamp.com

A very rhythmic and noizy night.
The ASTROGENIC HALLUCINAUTING set was leaning into what I like to call Tek-Noiz.
Not my usual sonic landscape of black ambient drone and noiz.

The noiz circuit consisted of:
- Two Dirtywave M8 beasts
- Polyend Play
- BeniDub DS71
- Deaftone Audio MIKSHER
- ERM Multiclock
- Ciat-Lonbarde Peterlin
- FaderFox PC12
- 1010 Music BlueBox
- Korg KP3+"

Pulsar-Beat


video upload by verstaerker

"a heavy Beat made with Pulsar-23 and a scary Pad on the Prophet-10
--------------------------------------------------------------
to listen more music by me please visit
https://verstaerker.bandcamp.com
https://verstaerkerahead.bandcamp.com"

Tom Oberheim Two Voice Pro

Note: links to listings are affiliate links for which the site may be compensated.


via this auction

"This is an Oberheim 2 voice pro with custom wood ends."

Roland Jupiter-Xm + Matching Gator Travel Case

Note: links to listings are affiliate links for which the site may be compensated.


via this auction

"The coveted JUPITER-Xm is like having the entire Roland Boutique line inside of a Jupiter with battery and built in speakers... Add a beautiful, matching Gator gig bag that feels like it was DESIGNED specifically for this 5 part synth and you have everything you need. A match made in heaven!

You'll have all the drums, bass, chords, leads and sound effects you need because the JUPITER-Xm can do 5 separate patches at once using 256 note polyphony! Plus: an AI Arpeggiator? Really!? Insane!

Plus: it SOUNDS AMAZING. There's a reason people go wild for this thing. Go watch some videos and see for yourself."

Solina String Synthesizer


video upload by Martin Pohl

"solina string synthesizer, ultra rare, still working.. needs some tuning and a little servicing. This machine is magic."

Beginner Friendly Synth Brass Sound-Design


video upload by Omri Cohen

"Here you can find the document of patching techniques and ideas - https://bit.ly/patchingideasdoc
Here you can find my online courses - https://bit.ly/synthesiscourses
Here you can find the advanced video and many other exclusive videos and content - https://bit.ly/patreonexclusivevideos

Buy me a coffee? - https://www.buymeacoffee.com/omricohen
PayPal - https://bit.ly/ppomricohen
Consider joining our community on Patreon and Discord - https://www.patreon.com/omricohen

Here is the synth brass patch, selection file, and the final patch - https://drive.google.com/file/d/1QCeb...

00:00 - Introduction
00:48 - The basic concept
04:10 - Adding a VCA
04:47 - Adding envelopes
09:14 - Setting the envelopes
10:50 - Adding movement to the VCOs
15:21 - Adding reverb
16:09 - In context"

Ambient bliss with the Walrus Slöer reverb and synths! (Nymphes, Moog One, TT-303, MS-20)


video upload by Jay Hosking

"Trying out Walrus's new stereo reverb with some hardware synthesizers.

I recently purchased the Walrus Slöer and thought I'd try it with some hardware synths. The Slöer is an update to their Slö pedal, now with stereo input/output and a couple of new algorithms. I'm extremely impressed with the overall sound of it, and got lost in my explorations. It's got a particular texture and character that's unlike my other reverbs, and I can foresee myself using it for other ambient work in the near future. In fact, I wrote the start of a few songs while noodling with it!

There's about 90 minutes of footage, which is available for supporters of my Patreon, but I trimmed it down to about 15 minutes for YouTube. And for those of you who prefer my actual music performance videos, I've recorded a song with the Slöer and will release it in about a week, when I have a moment to get it in shape.

Thanks for listening, and I hope this is useful and musical.

Synths used:
Cyclone Analogic Bass Bot TT-303
Korg MS-20
Dreadbox Nymphes
Moog One"
PREVIOUS PAGE NEXT PAGE HOME



Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH