Waldorf Microwave 1 Rev A (CEM 3389 chips) + Stereoping Programmer

Note: Auction links are affiliate links for which the site may be compensated.

via this listing

"The Microwave was checked by Waldorf last year, no problems found."

CLICK FOR MORE »

Waldorf Microwave Rackmount Wavetable Synthesizer SN 901177 w/ Cards & Controller

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Includes Stereoping controller (no psu/standard 9v) + overlays for the microwave (overlays for the :81z / K3 also included)

3 original soundcards"

CLICK FOR MORE »

Waldorf Microwave V1 Rev-A Rackmount Wavetable Synthesizer SN 90070A w/ Stereoping Controller

via this auction

CLICK FOR MORE »

Waldorf Microwave 1A Screaming

video upload by Transisted Waves

"Having fun with the MW1."

With Stereoping micro programmer.

Waldorf Microwave Rackmount Wavetable Synthesizer + Stereoping controller

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"It has the wonderful sounding CEM 3389 and OS 2.0 - kind of a PPG synth combining wavetable and analog filter. This machine was checked a couple of days by my tech. Original Performance (English) and Programming (English + German) manuals included, + Stereoping PSU & Manual."

Note Stereoping makes two controllers for the Waldorf Microwave. The more compact version pictured here and a larger version. You can find pics and demos of both in previous posts here. You can compare them to the Microwave Programmer by Access just posted here.

CLICK FOR MORE »

PPG wave 2.3 vs Waldorf Microwave 1

video upload by synthlegends

"In this video I compare some factory presets from the PPG wave 2.3 with some recreated PPG 2.3 Programs on the Waldorf Microwave 1 Rev. B (the latter version with CEM 3387 Filter Chips). The firmware on the PPG is 8.3, the firmware on the Waldorf is 2.0.

Maybe you can reprogram the sounds more accurate, but you can listen that even in the wavetable sounds the wavetable circle is quite spot on in the microwave 1.

Anyway you can listen that the PPG has some more roughness in deeper registers and in higher registers it has the typical aliasing effect. The microwave 1 sounds much cleaner and more polished. The difference about the SSM filter vs. CEM filter is not so much prominent in my opinion. I thought there is a very big hearable difference.

The microwave 1 is quite difficult to program without programmer, like from stereoping. Sometime I think I will buy one. Nevertheless, the microwave a not a substitue for a PPG wave for purists but it has the PPG vibe in it. We will see, if Behringer is capable to get the PPG wave right. Unfortunately I haven’t got the Waldorf M, but a friend has it. I think sometime I will borrow it and also do a A/B comparision with this synth.

In this video I didn't use any processing. I just recorded the synths directly plugging in the interface and also didn't use any plug-ins. I am very curious about your comments and opimions. Thanks for watching."

Stereoping MidiTools

video upload by Three CCTranslators automating Microwave, Matrix and TX81Z from DAW Stereoping

"Technical productdemo for the #CCTranslator which converts common Midi Control Change (aka 'CC') data into highly specialized #SysEx parameter change commands. This allows to remote or automate vintage Synthesizers like e.g. the #Waldorf #Microwave, #Matrix1000, #TX-81Z in your DAW. In the video these three Synths are automated - each with 4 parameters - from a dashboard in FL Studio. The Matrix1000 is running the tauntek firmware which reflects parameter changes on the LED display. Some little timing issues but mostly it works quite well. Most of the automation data was optimized by drawing steps and preventing redundant data. Depending on your DAW, automation curves can produce a LOT of data which might result in timing problems or missed events."

via stereoping

"The MIDI TOOLS are tiny, cute boxes manipulating Midi Data. They will be plugged in between the sender (MIDI OUT of DAW or Keyboard) and the receiver (MIDI IN of Synthesizer) and will be supplied with power from the connected Midi cable – there is no power supply jack. This is quite practical and works with the vast majority of equipment.

The Midi Tools are coming in 3 flavours:

The PolyChainer will be plugged in between the Synth Programmer and allows playing two Matrix 1000/6/6R (or other Synths) with 12 note polyphony

The CCTranslator translates ordinary Control Change (“CC”) messages into the complex SysEx commands to control and remote your vintage Synthesizer

The ChordTransposeFilter offers 4 features at the same time: Chord Memory, transposition of incoming midi notes, filtering of undesired Midi data and a simple MIDI Thru

The MidiTools are housed in a beautiful stainless steel case, the upper half painted in transparent strawberry red, yum. Like all Stereoping products their firmware can easly be updated over Midi. Please click the tabs for more info about the little helpers."

2021/05 - Userwave & Wavetable editing on Synth Programmer for Microwave

video by Stereoping

"The firmware update 1.62 for the #Stereoping​ Programmer's Microwave edition introduces #Wavetable​ editing & randomizing plus #Userwave​ randomizing and drawing. And there is a new PREFS setting optionally preventing the STARTWAVE knobs to run into the tri/sqr/saw waveforms to the end of each wavetable. The video shows all of these features in action."

Waldorf Microwave rev. A with Stereoping Programmer Demo

Roberto Raineri-Seith

"HQ audio demo with some typical classic wavetable synthesis sounds i’ve created on my Microwave rev. A with the Stereoping Micro Programmer.

Tascam DA 3000 recorder and Schertler Prime 13 analog mixer, TC Electronic D-TWO delay and Lexicon PCM 80 reverb."

2020/09 - Synth Programmer for Waldorf Microwave Demo

Stereoping

"Finally - the demo for the Stereoping Microwave Programmer - over 12 minutes full of short clips and subtitles - hopefully useful somehow. Up to 3:50 the sound only contains a non-related background music, the shown content did not have any valuable sound.

0:06 PREFS - Entering the Programmers PREFS mode, making changes to internal settings, automatic saving on exit
0:29 PATCH MODE - Entering PATCH mode, synchronisation of parameter data, stepping up/down through programs. Moving pots, display shows new and old value (in brackets), COMPARE and PEEK function
1:32 PARAMETER GROUPS - layout of Programmer's parameters in groups. Editing hidden parameters. WAVETABLE always available on encoder 4, solution for accessing the many WAVE ENV LEVELS/TIMES values with only 6 pots.
2:47 MODULATION MODE - how to edit the Microwave's modulation slots (normal and complex ones). Two dedicated pots for quickly setting VALUEs or ZEROing them out. Demoing the TEMP mode for direct change of modulation values through pots.
3:50 - EDITING SESSION, from here on the shown clips have sound. Starting with an INIT sound, the program is shaped into something nicer over 2 and 1/2 minute.
6:38 - RANDOMIZER - creating several sounds while changing the randomizers parameters. (Mind the volume, some aggressive sounds here)
8:12 - CHORD MEMO - playing with the 5 CHORD slots. Entering Chord SETUP to demo chord learning and STRUM.
9:30 - playing a pattern from a DAW, shaping a bass sound by Control Change messges making use of the Programmer's CC-to-SysEx translator

10:26 - MULTI MODE - finally a brief demo for the Programmer's MULTI mode. Please check the Programmer's PDF manual for details here.
#Waldorf #Microwave # Programmer # Editor"

Waldorf Microwave 1 Rev.A 2.0os w/ Stereoping Controller & Extras

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Waldorf Microwave 1 in the most sought after Revision A. It has been upgraded this year to the version 2.0 Operating system.

It works great and sounds amazing. It's been babied and used in a clean, climate controlled studio. It stays dust free and is always covered when not in use. It's 220v so you'll need a step up transformer in the USA, I recommend Acupwr for safety and reliability.

Comes with the Stereoping synth controller that really opens up your ability to tweak in real time and make your own patches. Along with are the two factory patch cards, Claudis Bruse and Dave Gould Techno card, plus two more 256k memory cards to back up your patches as well as three other Korg Mega Rams with 4 banks per card (these are all really rare). In addition to this are a set of factory and other manuals that I’ve collected over the years. I will also throw in the two right angle midi cables that work great for attaching the Stereoping to the MW. I have never seen such a kit of Microwave items in one listing, here's a chance to own a rare and amazing machine."

CLICK FOR MORE »

Waldorf Microwave Rev A w/ Stereoping Programmer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is a Version 1 Waldorf microwave with CEM 3389 and a Stereoping microwave programmer. Both are fully functional."

CLICK FOR MORE »

2019/12 - The Beauty Of Aliasing

Published on Dec 8, 2019 Stereoping

"December-song ftg. Waldorf Microwave squeezed through the SPL Vitalizer MK 2-T to emphasize it's grainy Aliasing. FlowerPower-Flute, Horns and Strings from Roland Integra. Nord Drum2 playing the beat, Hihats through a DIY Compact PhasingA & Boss SE-50 Delay."

Waldorf Microwave 1 Rev A with Stereoping programmer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

2019/07 - Sahara Pulse

Published on Jul 28, 2019 Stereoping

"Starting out as a simple testsong for a midified TR-606 in a custom case, this midi-arrangement exercise went somehow oriental and even epic in the end. The solo is played by the PULScar with slight realtime modulations to bring some live into the sound. Finally found the time to make a neat sticker for the frontpanel. The ensemble also contains a modded Alesis HR-16 with custom EPROMS holding oriental percussion. The big knob is for downpitching the whole machine, demoed at 3:52. Other gear: Roland Juno 6 (Bass) & JV1080 (Strings, Brass), Kawai K4 (Brass) and the Waldorf Microwave (.. well, some synth sound). Footage shows the realtime sound editing, some fotos, studio flyovers and score screengrabs."

3pDRX - a sweet synthesizer song

Published on Jul 21, 2019 Stereoping

"... a melancholic arrangement from 2010 - remixed, straightened and polished. Starting with the Kawai K4 sent through a lowpass filter with LFO modulation. Bass and strings coming from the JV1080. Melody played by the Waldorf Microwave, slight realtime-modulations with the Programmer. Drums are Pearl DRX and SC-40 (HiHats)"

Stereoping Synth Controller For ESQ-1 (esq8)

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Stereoping Midicontroller for Sequential Prophet VS - realtime programming and DAW-automation

Published on Mar 19, 2016 stereoping

"This product demo shows some sound editing on the Sequential Prophet VS using the Stereoping Synth Controller which is a specialized midi hardware programmer available in many editions for Matrix 1000, Microwave, TX81Z and many more.

This edition of the controller is named 'ProVessorS' and does not cover ALL parameters of the Prophet VS but makes programming MUCH easier and funny - especially for VCA/VCF envelope rates and levels. The 4 Oscillator's Wave numbers, coarse and fine tunings are
also in direct access.

This 10-minutes-video has 7 quick chapters: Starting point is the main concept of the UI. 2. shaping the init-patch of the VS into a nice sound while being sequenced. 3. & 4. show realtime tweaking of vector envelope rates and LFOs. Chapter 5 shows how quick and easy patch name editing works with the 'letter dial mode'. In 6 you'll see remoting and automating the Prophet VS through ordinary Controller-Change messages in Fruity Loops and Ableton. The last chapter 7 demoes Detuning and Unison. Be sure not to miss this very strange but extremely cool sound the Prophet VS accidently makes when changing a wavenumber in Unison - shown from 8:57 on.

The video was recorded using 2 cameras, one showing the controller while being used, the other cam with focus on the Prophet VS display reflecting the realtime changes. In case you're wondering - the display of the VS is not the original. The faceplate of the controller in the video is an early paper printout, the final one is black not blue.

Hope you like it :-)"

Waldorf Microwave - Stereoping Controller Demo

Published on Sep 24, 2014 TausendAugen

http://www.stereoping.com/synth-contr...

Microwave with Stereoping controller - testing multimode funktion

Published on Sep 10, 2014 TausendAugen

"Hallo, here is some brand new gear from Stereoping. This cute little box is very useful. I will show some detail video of the programming function later on. If you like this Box, visit the Website of Stereoping:
http://www.stereoping.com/synth-controller-overview-and-features/?lang=en"