Dreamy "Nymphose" evolving pad on the Mask1

video upload by Kodamo

"This pad takes advantage of the Mask1's play modes, combining paraphony and selective portamento which happens only legato notes that are played close together. You can control when the filter sweep restarts by releasing all notes (or keep at least one note active to keep opening it)"

Hardware Jams Weekend Challenge - Water

video upload by SynthAddict

"Lots of homemade watery samples to celebrate International Water Day. :-)

Mostly made in harmonic minor."

Buchla 252e Polyrhythmic Generator - First Run Var1

video upload by verstaerker

"this basically the same patch from yesterday.. with minor tweaks. and some realtime pointless soundtweaking (out of cam, wich i realized a bit late)"

ARP QUADRA - Handmade Miniature 1/6 scale.

video upload by Ronaldo Lopes Teixeira ROLT

Something new for kids and adults - candy cloud by ERROR Instruments

video upload by errorinstruments paul tas

"candy cloud synthesizer, an experimental patchable synthesizer with an effect processor designed for kids aged eight and above up to 108 years old. This synthesizer allows users to create happy accidents, psychedelic soundscapes, and strange rhythms, providing a lot to explore. It will be available in a do-it-yourself kit during workshops for both children and adults, with pre-assembled versions also available. The candy cloud synthesizer is part of Errorinstruments and the Error Academy."

Roland R 8 & Inspire The Music 4K

video upload by peter m mahr

"Short video about Roland's R-8 and "Inspire The Music" from BJOOKS.

Reverb = Roland SRV-330"

Circuit 3 New Collaboration

video upload by Circuit 3

"#NewMusicMonday an as-yet unreleased collaboration 'I Could Not Breathe'. Can't wait to share this. Worked with some great friends on this track. #synth #collaboration"

The Dream of Allan Gray

video upload by Richard DeHove

"This is a single DB-01 drone track recorded exactly as you see it with no editing. Nor have any effects, compression, EQ or limiting etc been added in the DAW (other than the sci-fi movie talk samples). The DB-01 is running into the Light pedal on feedback mode. (Thanks to @aopaul for suggesting turning down the dry level which has entirely solved the noise issue into the Rat). From there it goes into the Rat, and then into the Shift Line Astronaut for some modulated stereo reverb.

A very slow LFO on the DB-01 opens the filter enough to better activate the feedback on the Light pedal which gives the periods of relative peace and intensity. The DB-01 is also on random playback with a handful of notes on bar 1 and the other three bars empty. The Astronaut pedal has a very slow modulating octave shift in the reverb and the Light pedal has a very slow shift in which optical sensor pair is active. All these slow modulations deliver the needed variation.

The old video is all from 'Vampyr', a 1932 Danish-German horror movie. That's combined, somewhat oddly perhaps, with audio samples from the 1953 sci-fi classic "It Came From Outer Space". It wasn't hard to find the good bits in that since I first sampled it way back in the day on my old EPS. We even had a song in our live set which used one of the quotes from the movie as it's main hook "Our mission was to another world". Good days. Of course I couldn't re-use that same sample here :D

The title of this video comes from the original full title of the Vampyr movie: 'Vampyr – Der Traum des Allan Gray' or in English, 'The Dream of Allan Gray'.

Lots of downloads for supporters on Patreon: https://www.patreon.com/richarddehove
Many thanks to my kind patrons who keep this channel ad-free
My website: https://richarddehove.com/"

Stay drum: Macro oscillator for Versio platform Sound demo

video upload by Meska

"Here a quick sound demo of Stay drum an unofficila firmware for NI Versio

This is a beta firmware !!

info and DL link : https://jasmineandolivetrees.com/page...

Thank you for watching.
My name is Meska of the statik collective . I've been making mostly "dark and expérimental" music for more than ten years now, i'v learn so much online, now it's time for me to share my knoledge, my exploration and this channel is a place to talk about the tools, sound design and techniques to make music with.

You can stream my albums and EPs at https://statikwave.bandcamp.com/

If you'd like to support the channel​ consider buying music from bandcamp ;)"

"Stray Drum" is a macro oscillator firmware based on FM and ring modulation for the Versio platform. This is a beta release, and it contains rough edges; even some parts of the front panel aren't in use yet, such as the audio inputs, the Trig button, and one of the switches.
The pitch input can track V/Oct after calibration. However, a calibration mechanism has not been implemented yet.
Pitch: Spans 5 octaves and can track V/Oct but requires calibration.

Spread: Introduces 2 harmonics to the root. Allows seamless adjustment between different chords and dissonant ratios, ideal for percussive sounds.

Feedback: Applies FM feedback to the operators, introducing harmonics up to noise into the base signal.

Attack: When turned to the left, it adds transitional noise that is pitch-filtered.

Decay: Provides a traditional decay effect.

Mode: Alters the modulation function applied to the base signal. It transitions seamlessly from no modulation to exponential decay to a sine wave. In the sine wave section, it can change the modulator frequency, up to a ratio of 5.

Amount: Governs the primary modulation. In exponential decay mode, moving it to the left produces ascending pitch, while moving it to the right creates a descending pitch. Extreme left and right settings select the longest pitch-shifting times.Now, switch to sine wave mode. When the amount is set to the right, it controls the degree of FM modulation. To the left, it adjusts the level of AM modulation, transitioning into ring modulation where the modulator transforms from a sine wave into a square wave.

How it sounds

With this set of controls you can shape its sound to powerful kick drums, classic snares and hihats. Percussive sounds like congas, claves, metallic objects, bells, electronic claps, etc.
It also works as a chord machine, giving a wide range of deep and obscure chords perfect for dub techno stabs. Especially when selecting a chord, apply FM to it and some reverb/delay effect."

The ultimate drone machine setup

video upload by Omri Cohen

"The patch from this video, and patches from many other videos, are available on my Patreon page - https://www.patreon.com/posts/patch-f...

00:00 - Introduction
00:12 - Drone voice
04:40 - New drone voice
07:02 - VCO voice
09:17 - The full setup
12:10 - Patch example"

Analogue Solutions Maximus Polyphonic Synthesizer Multi Sequence and Lead #shorts

video upload by Analogue Solutions

"Maximus #synthesizer in mono mode, playing a multi-part analog sequence with live lead."

Vintage Classics // Octave Cat

video upload by Starsky Carr

"An in-depth look at the Octave CAT. This one is an absolute classic from 1977. It's the Series Revision Model (SRM), which is the same as the SRMII apart from its additional sync mode and CV connections.

There's also a few minutes of showing the differences between this and the Behringer - everything else is the close enough to make a comparison rather boring!"

0:00 A bit of Background
4:08 VCO 1
5:37 Modulation
8:21 VCO1 as LFO
9:37 VCO2
10:19 Sync
11:28 Filter
13:27 Dual X-Mod
14:00 Some BASS patches
15:36 Envelope Repeat
16:01 S&H
17:10 What's the Behringer like?
25:37 Some Sounds
31:32 That Intro Track

Roland Juno DS61 Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this listing

Additional SYNTH CITY Listings

CLICK FOR MORE »

Synthark XY77y massive programmer for Yamaha SY77 handbuilt

Note: Auction links are affiliate links for which the site may be compensated.

via this listing

This is an amazing, handmade per order, midi programmer for the Yamaha SY77 mega synth. I just got this and used it only about 30 minutes total. It was built for me by Synthark and I paid over $700 for it. Unfortunately, I'm still not really meshing with the process of programming this synth and have a lot of other gear so I'm willing to take a loss and let someone else have it that understands the synth better."

CLICK FOR MORE »

Synthark VFXy massive programmer for Ensoniq SD1 & VFX

Note: Auction links are affiliate links for which the site may be compensated.

via this listing

"This is a beautiful box of knobs and sliders. Hand built per order by Synthark and made specifically for the Ensoniq SD1 and VFX synths. This was just made for me and I paid about $700 for it but I have a lot more gear and just don't use this synth as much as a lot of my other stuff. I only used this for maybe 20 minutes total. NO SYNTH comes with this purchase. You get the freshly built programmer and a plug to power it. I can provide all the info that I got from Synthark about this programmer. These are not even listed on their website!!! Made specifically for my studio but.... yeah. One thing to note is Ensoniq synths need to be retriggered to hear changes made."

CLICK FOR MORE »

Oberheim Matrix 12 61-Key 12-Voice Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this listing

Pics of the inside below.

CLICK FOR MORE »

The Roland System 100 Synthesizer - Semi Generative Patch #modularsynth #synth #ambient #drone #100

video upload by S R DHAIN

"Modular & Semi Modular synths can be set to self-generate all kinds of effects, noises, and music. It can be both challenging and fun to program the synths to do this.

Here , the 104 sequencer is running at a very low clock speed and has a sequence of notes that are consistently chiming in on the 101 keyboard, which itself has the VCF & the VCA being slowly modulated by it's LFO.

The 102 expander has the sample & hold switched on to both pulse out a note trigger & slowly modulate its the VCF. My occasional interjections are to change the key of the sequence on the 101 keyboard & the 102's drone note; the 102's pitch is affected by the CV input from the 101's keyboard."

Moog Subsequent 37 - "Klaus Schulze. Tribute" 40 Presets and Sequences

video upload by LFOstore

"With all passion & inspiration we made this long awaited project - a Tribute to grandfather of Electronic music & Berlin School - dear Klaus Schulze!

Buy: https://lfostore.sellfy.store/p/moog-...

This soundset is made on Klause's most favourite synth during decades of creativity - A Moog!

Introducing 'Tribute' soundset with 40 melodic & atmospheric presets for Moog Subsequent 37 splitted on:

Classic & modern Berlin sequences
Complex arpeggios & rhythmica
Warmy Moogy leads & solos
Deep Drones and Basses

All you are need to make a classic Berlin music track & touch the legacy of Klaus Schulze."

Noodling on homemade eurorack polysynth

video upload by Stazma

"Here is a full video from a short improvisation I had on a first iteration of a four voice polyphonic patch built around the Vostok Instruments modules, with some help from the 810 Mk2 from System80 and a Fusion Modulator from Erica Synth.
Mostly playing with the arpeggiator speed and pitchbend here tho."

In NiftyKEYZ keyboard case.

OSI-OP, Ratio Switch and XFMR VCA - Analog Oscilloscope Screen - Complex Waveforms (Eurorack)

video upload by Vaemi

"OSI-OP, Ratio Switch and XFMR VCA - Analog Oscilloscope Screen - Complex Waveforms (Eurorack)"

https://reverb.com/shop/vaemisynth

Sonic Seed Trot & Hadouken

video uploads by Sonic Seed

Hadouken via Sonic Seed

S&H In S&H trig S&H out

S&H In 8, S&H Trig 9, and S&H Out 10 are a set of sampling and holding circuits. S&H In 8 inputs the signal that needs to be sampled,S&H Trig 9 inputs the Trig signal that samples the input of S&H In 8, and the sampling result is held until the next Trig signal triggers a new sampling, and the result is output at S&H Out 10. When S&H In 8 is not plugged in, the Trig signal of S&H Trig 9 samples the Noise Out of 2, resulting in a nearly random sampling result. The sampling-hold function can be triggered by pressing button 5 when the S&H Trig 9 has no insertion line.

Noise Trig & Noise Out

Noise Trig 1 and Noise Out 2 are part of the Noise generator, which continuously outputs a Noise without any input, which is the result of the sound amplified many times after the breakdown of the Zener tube. If a wire is inserted into the Noise Trig jack, the Zener tube will stop the breakdown state. At this time, give a signal, which can be Trig, square wave or any other signal, only if it is higher than 3.3v, it will again break through the Zener tube, constantly reciprocating, changing the output effect of the Noise Out.

Offset Out

Knob 3 changes the output voltage value of Ofset Out 4, when the button is pressed 5.Ofset Out 4 will output voltage according to the position of the knob, release the button, and the output is terminated.

Aux in & out

Aux In 6 and Aux Out 7 are a set of envelope non-tunable Vcas triggered by button 5. Aux In6 can be an audio input or other signal input, press button 5,Aux In6 input will be output from Aux Out 7 after adding an envelope control. Noise Out2's noise output is added to AuxIn 6 when AuxIn 6 is not plugged in. This means that you can directly control the noise output in Aux Out 7 by pressing button 5."

CLICK FOR MORE »

Gimme Some (Kick) Drum by Blue Lantern Modules || Full Walkthrough and Sound Demo

video upload by Robots Are Red

"GSDrum, or Gimme Some Drum, or Gimme Some Kick Drum is a 10 hp drum synthesizer module. It really shines as a kick module, but can do other drum sounds such as toms or something out of the syncussion, or act as a bass synth tracking it 1v/oct. This is not a typical kick oscillator using the 'Twin T' approach, GSDrum uses a v/oct tracking triangle core VCO with an OTA based VCA. There is CV control for the trigger of course, along with v/oct tracking, Linear FM, and VCA accent inputs. The Timbre knob shapes the oscillator starting at a sine wave, to a triangle wave, all the way to an overdriven square wave. Influenced by the Korg ER-1 drum synthesizer. The accent input can simulate midi velocity or drive your sound even more. You can jump to any section of the video here: 00:00 Opening 01:03 Introduction 01:42 Walkthrough Begins 01:50 Pop 02:07 VCA Envelope 02:58 Pitch Envelope 04:05 Tune Knob 04:15 VCA Knob 05:07 Timbre Knob (Waveform morphing) 06:16 Accent Input 06:57 v/Oct Input 07:10 Linear FM Input 07:40 Feedback Patching 08:43 Kick and Drum Sounds (Minimal Talking) 10:11 v/Oct Bass Line Demo (Minimal Talking) 11:17 Accenting with Sequenced Gates (Minimal Talking) 14:25 Frequency Modulation with Sequenced Gates (Minimal Talking) Special thanks to Blue Lantern Modules for providing the modules for this video."

via Blue Lantern Reverb

"Part of the 'Gimme Some' series. Gimme Some Drum....

What does this module do?

This module is a complete mini synthesizer that specializes in making analog kick drum sounds.

This product does not use a "Twin T" approach to make it's drum kick sound. This is using an actual 1v/octave

triangle core vco, and ota based vca. The shaper circuit that converts a triangle wave into a sine wave was brought to the front panel. The shaper knob was calibrated to start its shaping at the beginning of a sine wave, and end with an overdriven square wave.

This parameter is called 'Timbre'.

This product can produce a wide variety of ultra generic analog kick drum sounds.

Influenced by the Korg ER-1 drum synthesiszer, but laid out in an analog fashion.

-toggle switches are connected to 'timing' capacitors. You can select decay legnths on the fly.

-Depth Knobs let you precisely dial in how much punch, and loudness you want.

-Accent input lets you simulate 'Midi' velocity but with a positive CV input signal. This makes the Amplifier go louder in volume.

This is basically a CV input for the VCA circuit.

-POP parameter creates a clicky sounding, short audible pulse.

All the internal circuitry was optimized for drum kick. You really can't goof up and not make a percussive sound.

All you need is a triggering signal.

Internally Pre-Patch Products: OTA Triangle Core VCO + Sine Wave Shaper + Assist Percussion Utility

Big time savings!"