G-Storm Electro 101-VCO Version 2 Roland SH-101 Oscillator Adaptation

video upload by gstormelectro

"101-VCO Version 2 Roland SH-101 Oscillator Adaptation + RD-6 [Demo 1 No Talk]

Audio + Video by G-Storm Electro c. 2023

101-VCO has returned to the fold: the same great sound, simplified and improved tuning, and having all the individual outputs without need for an expander module. All in 12HP
Headphones or good monitors recommended.

Check my Reverb store for 101-VCO availability.
Oscillator | GSE 101-VCO
Filter | GSE JU60-VCF
VCA | GSE 2xVCA
LFO | Feedback LFO10
Output | Pittsburgh Outs
Drum Machine (off camera) | Behringer RD-6
Recorded direct, no other mastering or effects.

*MUSIC* https://gstormelectro.bandcamp.com/
*BLOG* https://gstormelectronica.blogspot.com/
*LISTEN/DOWNLOAD* https://soundcloud.com/gstormelectro
*REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info."

via G-Storm Electro's Reverb shop

"The 101-VCO has been re-tooled in 12HP! Version 2 continues its authentic realization of the Roland SH-101 Oscillator adapted to Eurorack: that lovely Sub-Octave Generator, that snowy Noise Generator, an integrated Mixer section to bring all the waves together.

Now in revision 2: Improved tuning stability using power rail voltage references. Simplified tuning via coarse/fine tune knobs. Individual waveform outputs without need for any expander module.

101-VCO expands the original SH-101 features to reveal more potential of the 3340 chip: Triangle wave and exponential FM. And 2 flavors of Linear FM: Lo Range to find those vibrato sweet spots, and Hi Range for full-on Linear FM madness. Expand the palette of original sounds using an external CV signal for Pulse Width Modulation that is summed against the initial Pulse Width amount. While the initial PW amount can go right up to the edge of vanishing, PWM can take the Width right down to 0% up to 100% for complete cancellation.

Great care was taken to keep the 101-VCO fully analog circuit as close to the original as possible. Featuring an Alfa AS3340 re-issue chip at the core of the design, surrounded by eight 20mm slide pot controls. With the conventional coarse/fine tuning knobs it will provide full audio range, whether using the v/oct input or not.

Every 101-VCO is meticulously hand-crafted in limited quantities, not mass-produced, and ready to rock your modular world. Includes 16-pin-to-10-pin power connector cable.

Coarse Tune Knob | Initial oscillator frequency

Fine Tune Knob | Initial oscillator frequency, +/-6 semitones range

FM Slider | Amount that an external signal will modulate the frequency

FM TYPE Switch | LO for vibrato, HI/EXP for more dramatic frequency modulation

PULSE WIDTH Slider | initial Pulse Width amount

PULSE WIDTH MODULATION Slider | The amount that an external signal will affect pulse width

SOURCE MIXER Sliders | Adjusts the amplitude amount of each waveform going to the MIX output

SUB-OCTAVE Switch | Select between -1 octave Square, -2 octave Squrare, -2 octave Narrow Pulse

V/Oct Jack | Pitch Initial Frequency input for connecting keyboard controllers or sequencers

FM Jack | Plug in external signals to modulate Pitch here, such as LFO or envelopes

PWM Jack | Plug in external signals to modulate the Pulse Width here, again LFOs are typical

Individual Waveform Output Jacks | These jacks always output their buffered, DC-coupled signals regardless of Source Mixer settings

Mix Output Jack | This is the combined waveform output of the Source Mixer

TUNE Trimmer (on the back) | Affects the initial oscillator frequency

SCALE Trimmer (on the back) | Affects the v/oct tracking of the oscillator"

CLICK FOR MORE »

Eurorack Formant Filter Comparison

video upload by John Schussler

"I now find myself with 3 separate filters that do "formant" filtering, so clearly it's time for a comparison. I'm literally getting my ya-yas out. And my yi-yis, and sometimes my wa-was. Just depends on where you turn the knob....

There are other formant filters out there, this isn't all of them, but it's all the ones I have, so don't assume this is the exhaustive comparison.

Formants are fun. And though I don't get into it much in this video, using formant filters for "regular" duties with only mild formant effects can be quite interesting.

Actually, using formants sparingly should probably be the rule. There's definitely too much of a good thing possible here....

00:00 Intro
00:20 Gyrinx VCF
08:00 Morphing Filter Bank
18:10 Formantic"

Eurorack Waveshapers - May 2023 comparison

video upload by John Schussler

"Another month, another new set of modules needing listening to. These are all waveshapers in one form or another. Ok, not entirely, the first one's just a filter. So technically it shapes the wave, but not like, folding it or anything.

Anyway.

Just some more modules that seem like they sorta live in the same category, up for comparison and general listening/introduction.

00:00 Intro
00:20 T2K
05:15 Morphing Filter Bank
11:57 Roucha Legio
20:08 Flexhaper
26:00 Dis"

Delta VCF [VS] Delta VCF Eurorack Filter [quick comparison]

video upload by gstormelectro

"Audio + Video by G-Storm Electro c. 2023

Quick no frills comparison demo. The left Delta VCF has the LM13600 chip. The right one has the LM13700 chip. Is there a difference between them? Caution!: full resonance at the end of the clip. Recorded direct to Tascam DR-05, no other mastering or effects. For Delta VCF availability click my Reverb store link below."

G-Storm Electro:
*BLOG* http://gstormelectronica.blogspot.com/
*LISTEN/DOWNLOAD* http://soundcloud.com/gstormelectro
*REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info.

G-Storm Electro performs Ghost Track at The Creatives Factory in Dallas, TX

video upload by gstormelectro

"Audio + Video by G-Storm Electro c. 2023

My buddy Seth did an unplanned phone capture of my performance last Sunday. It was the DFW Synth Headz Synthe Summer joined by MOTS.DFW at The Creatives Factory. We didn't get direct audio, so I dubbed one of my rehearsal sessions recorded direct with no additional mastering. My first time playing!

Ghost Track comes from my new album Superior Mirage out now on Bandcamp
https://gstormelectro.bandcamp.com/"

JU60-VCF Eurorack Filter [Demo 1] + Feedback 106-Chorus

video upload by gstormelectro

"Audio + Video by G-Storm Electro c. 2023

Auditioning my JU60-VCF with and without the Feedback 106-Chorus.
JU60-VCF is a eurorack adaptation of the Roland Juno-6/60 + Jupiter-8 lowpasss filter.
JU6-VCF has 2 audio inputs, 2 CV controls, and 2-pole and 4-pole lowpass modes.
They are made using IR3109 and BA662 chips for authenticity.
Headphones or good monitors recommended.


Check my Reverb store for JU60-VCF availability
While 101-VCO is discontinued, version 2 is expected to return in 2023.
*REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info.


Oscillator | GSE 101-VCO
VCA | GSE 2xVCA
Chorus | Feedback Modules 106-Chorus
LFO | Feedback LFO10
Output | Pittsburgh Outs
Recorded direct, no other mastering or effects."

via G-Storm Electron on Reverb

JU60-VCF is an analog 4-pole low pass filter adaptation of Roland Juno-6/60 using a vintage IR3109 chip with a BA662 OTA chip in the resonance feedback loop. This topology was also used on the Jupiter-8, with a switch for tapping the 2-pole mode. Resonance will self-oscillate and produces a nice sine wave alone. JU60-VCF won’t turn your system into a polyphonic synth, but it has a classic sound at a sweet price.

FREQUENCY | the initial Cutoff Frequency of the filter

RESONANCE | the depth of the peak frequency resonant feedback

IN1 & IN2 | Mix together 2 different audio signals, each w/ their own mix pot.

CV1 & CV2 | Modulate the Cutoff Frequency w/ any polar/bi-polar mod source.

MODE | Select between lowpass 2-pole or 4-pole operation.

OUT | the audio output jack of the filter


Includes a 10-pin to 16-pin Eurorack ribbon connector

8HP Module width
24 mm Module depth
25 mA on +12V
25 mA on -12V
0ma on 5V (not used)

JU60-VCF pairs well with:

GSE 2xVCA
101-VCO r2 (coming in 2023)
Feedback Modules 106-Chorus

E-MU ESI-32 for Pure Lofi Sampler Bliss [Demo]

video upload by gstormelectro

"Video and audio by G-Storm Electro c. 2022

Today I'm exploiting the ESI-32 rack sampler for lofi/crunchy/funky sound in multi-timbral mode. Drums were sampled at mono 22K then downsampled to 12K bandwidth, everything else down to 8K. All you're hearing is the ESI-32 sampler including built-in chorus, and internal LFO applied to autopan/vibrato. The audio was recorded direct to Tascam DR-05, no additional effects or mastering.

ESI-32: bit of an underdog, in that early 90s era when samplers started to overcome their limitations of memory, bandwidth, storage media, and processing capabilities. At a fraction of the current selling price for other vintage samplers of the late 80s that preceded it."

*BLOG* http://gstormelectronica.blogspot.com/
*LISTEN/DOWNLOAD* http://soundcloud.com/gstormelectro
*REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info.

G-Storm Electro: Introducing Influx 8-Channel Eurorack Audio Sub-mixer

video upload by gstormelectro

"Audio + Video by G-Storm Electro c. 2022

Introducing Influx, an audio sub-mixer for eurorack.
A streamlined design taking 16HP.
Six channels having LED mutes, level, and pan.
A stereo input pair having level control.
Stereo mix output.

In this video I'm putting the Influx mixer though it's paces.
I put together an elegant live performance patch using all 3 of my cases.
Be sure to listen on headphones or quality monitors to hear all the sub-bass frequencies.
Drum Modules | Pittsburgh (PGH) modular Safari
Snare | PGH Polar Bear | PGH Local Florist | PGH Analog Delay Unit | Feedback Squeez compressor
Bass | Cre8audio Capt'n Big-O | G-Storm 101-VCF
Lead | PGH Primary Oscillator | G-Storm SH5-VCF | Happy Nerding FX Aid - Clouds Reverb Algo
Sample | Erica Sample Drum | G-Storm Pro-VCF | Mutable Clouds | Shakmat Gemini Path
Percussion Gates | Malekko Varigate 4
Bass/Lead Sequencing | Keystep Pro
Recorded direct, no other mastering or effects.

Check my Reverb store for availability Influx and other cool modules I build by hand."
*REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info.



"Manage the Influx of audio signals in your Eurorack modular system. Influx is a streamlined 8-Channel audio sub-mixer. Suitable for your mixing needs within smaller to medium sized systems. Or chain two Influx units together for larger systems.

6 Mono Input channels each having: Bourns 20mm throw audio level faders w/ 3x gain possible, blue LED latching audio mute button, pan pot, and a scribble strip!

One Stereo Input pair of Left/Right inputs on channels 7/8 - Audio level rotary pot w/ 3x gain possible, Channel 7/(mono) is normalized to both L/R if nothing is plugged into Channel 8/R jack.

For larger systems you can chain two units together for a total of 14-Channels. Simply patch the output pair of one Influx to the 7/8 input of another. A 10-to-16 pin ribbon cable is included. Each module is 142 solder points all crafted by hand in limited quantities, and tested for quality assurance.

Specs:

16HP (80.5mm) Module width
22mm Module depth
21 mA on +12V
9 mA on -12V
5V not used
Influx pairs well with:

Pittsburgh Modular Outs
Befaco Output module v3
GSE DC571 Lo-Fi Dual Compressor
…another Influx mixer for 14-channels"

CLICK FOR MORE »

2xVCA Exploration of Audio Rates Amplitude Modulation

video upload by gstormelectro

"Audio + Video by G-Storm Electro c. 2022

Want to spice up your ordinary analog VCOs?
In my previous VCA Tips and Tricks video I showed you how to do audio rate modulation using a VCA. It's basically a tremolo, only the control signal is another audio signal.
The result ends up sounding similar to ring mod or FM.
Today I'll show you exactly how to patch it up. And explore the cornucopia of interesting AM sounds using various input and control signals possible using a VCA.

Check my Reverb store for 2xVCA version 3 availability
*REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info.


0:00 Intro
0:26 Patching It Up
1:26 Exploring Various Source and Modulation Waveforms
5:47 Adding a Filter and Envelope"

104HP Eurorack Case Build From Cigar Boxes Timelapse

video upload by gstormelectro

"Audio + Video by G-Storm Electro c. 2022

Today a timelapse build: a 104HP Eurorack case from cigar boxes.
These are nice Spanish cedar cabinets, not cardboard.
First I build a suitable box, install rack rails.
Then solder together a bus board and install power supply.
Last, putting all the modules inside.

Power Supply | Tiptop uZeus
Bus Board | Synthrotek Noise Filtering Distro
Rails + Nut Strip | Synthrotek 3mm
Screws | After Later 3mm

This video was made for general entertainment purposes only.
Activities in this video are not recommended without proper training and safety.
If you are using woodworking power tools: always observe safety
precautions, wear protective eyewear, and read user manuals to prevent
accidental bodily injury.

The audio in this video used these modules:
G-Storm Electro: 101-VCO, 101-VCF, 4027 VCO, T2K-VCF, diy buffered multiple, 2xADSR, 2xVCA, Polychrome Phaser
4ms Rotating Clock Divider
Synthrotek DLY
Qu-Bit Data Bender
Feedback Modules CP3- Mixer
Pittsburgh Modular Outs
along w/ Behringer RD-8, snare has Empress Reverb
Recorded direct, no other mastering or effects.

*BLOG* http://gstormelectronica.blogspot.com/ *LISTEN/DOWNLOAD* http://soundcloud.com/gstormelectro "*REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info.
"

Elemnt Eurorack/Semi-Modular Jam (MI Plaits, FX AID, Grandmother, Tonus VCF) [No Talking]

video upload by Elemnt

"I recorded this jam recently & decided to release it for my birthday :)

Gear: Mutable Instruments Plaits, G-Storm Electro Tonus VCF, Frequency Central System X Envelope, Happy Nerding FX AID, Moog Grandmother & ADDAC200PI Pedal Integrator.
I created a sequence on the GM, just playing around from there"

T2K-VCF Transcendent 2000 Eurorack Filter Adaptation by G-Storm Electro

video upload by gstormelectro

"Audio + Video by G-Storm Electro c. 2022

T2K-VCF is a Eurorack modular adaptation of the Powertran Transcendent 2000 analog filter. Wavefolded material sounds phenomenal on this, coming from Capt'n Big-O. Op Amp gain compensation means no loss of bass frequencies even at extreme resonance settings. Resonance will self-oscillate and produces a nice aggressive sinewave alone. With some coaxing you can track the self-osc w/ v/oct.
At the end you'll hear the filter output going into a phaser and delay.

Sound sources | Capt'n Big-O + GSE 101-VCO
Envelope | GSE 2xADSR
Phaser | GSE Polychrome Phaser
Delay | FX Aid
Recorded direct, no other mastering or effects.

Check my Reverb store for T2K-VCF availability and other cool modules http://reverb.com/shop/gstormelectro"

"Introducing the T2K-VCF: an 8HP analog circuit adaptation of the lowpass/ bandpass filter from an obscure 70s monosynth – the Powertran Transcendent 2000.

T2K-VCF is a 2-pole CA3080 OTA design w/ CA3140 op amp compensation at each stage. Translation = no loss of bass frequencies even at extreme resonance settings. Resonance will self-oscillate and produces a nice sine wave alone. T2K-VCF will fatten up routine oscillators - transform boring square/pulse and straight ramps into curvy vixens dressed to kill. Wavefolded material sounds phenomenal on this.

FREQUENCY | the initial Cutoff Frequency of the filter

RESONANCE | the depth of the peak frequency resonant feedback

IN1 & IN2 | Mix together 2 different audio signals, each w/ their own mix pot.

KB | Modulate the Cutoff Frequency w/ a V/oct signal or any other polar/bi-polar mod. Self-oscillation resonance will track v/oct loosely, but you will need to tweak the Initial Cutoff Frequency (Tune) and the KB amount knob (width tracking) to get there.

CV | Another Frequency mod can go here, range is greater than the KB input.

SHAPE | Select between LP lowpass or BP bandpass filter output w/ this mode switch.

OUT | the audio output jack of the filter


Includes a 10-pin to 16-pin Eurorack ribbon connector

Specs
8HP Module width
24 mm Module depth
14 mA on +12V
25 mA on -12V
0ma on 5V (not used)

The T2K-VCF pairs well with:

Wavefolders or VCO/wavefolders – Cre8Audio Capt’n Big-O, Dannysound Timbre

GSE 2xADSR – use envelope CV for some deep bass modulation

GSE Polychrome Phaser

Delay Effects – Happy Nerding FX Aid"

TWO Polychrome Phasers! Stereo FTW Eurorack Effect Demo #2

video upload by gstormelectro

"Audio + Video by G-Storm Electro c. 2022

Continuing phaser adventures, this time with TWO Polychrome Phasers.Having two phasers opens a new world of stereo possibilities.
Using 2 phasers is not unlike a Mutron Bi-phase dual phaser.
A 4HP analog circuit adaptation of the 6-stage phaser section from the Italian stallion - Farfisa Polychrome. Recorded direct, no other mastering or effects.

0:00 | Intro and patch explanation
0:53 | VCO: Pittsburgh Primary Oscillator
1:28 | VCO: DNA Symbiotic Waves
2:37 | Yamaha SK203:44 | Juno-60

Check my Reverb store for availability and other cool modules"
*REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info.

Eurorack phasers - two new additions

video upload by John Schussler

"Two new phasers have arrived. The G-Storm Electro Polychrome is from the Italian Farfisa synth/organ from the 1970s. The Nonlinear Circuits Encephalo Adjuster is from, near as I can tell, a wide orbit outside Jupiter.

Very different in character, but both with lots of great sounds.

Envelope is Zadar, sequence is from Stochastic IG, and VCO is a Patching Panda Operat (saw wave).

00:00 Intro
00:20 Polychrome
08:20 Encephalo Adjuster"

You can find additional details on the G-Storm Electro Polychrome here. This is the first post to feature the Nonlinear Circuits Encephalo Adjuster. Details and pics follow.

"This module is a 24 stage phase shifter using LDRs in a black box. It is a little more complex to build than usual but most of the build is repetitious and not so difficult. I have added plenty of pics in this guide to help with the build.

Probably the unusual feature is the positive and negative feedback path. Feedback is 0 when the Regen pot is in the middle, turn it to the left for negative feedback, to the right for positive, or use CV to do the job for you. It will self-oscillate at the extremes.

It is probably obvious at this point that I have a thing for phasers. 24 stages are somewhat ridiculous but I wanted to try it and the result is a very nice smooth phaser with some angry bits when you push it. The name comes from a mind control device that appears in a few AE Van Vogt novels, I have been itching to use it for years.

The trimpot on the top PCB sets the operating range for the Phase pot. Set it to remove any dead zones at the extremes.

Black/gold panels are available for this module.

CLICK FOR MORE »

Polychrome Phaser Eurorack Effect Demo [Farfisa]

video upload by gstormelectro

"Audio + Video by G-Storm Electro c. 2022

Introducing the Polychrome Phaser.
A 4HP analog circuit adaptation of the 6-stage phaser section from the Italian stallion - Farfisa Polychrome.
Recorded direct, no other mastering or effects.

0:00 | Intro
0:27 | G-Storm 101-VCO and Functions
2:22 | Erica Sample Drum
2:57 | Pittsburgh DNA Symbiotic Waves
4:00 | Juno-106

Check my Reverb store for availability and other cool modules" *REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info.

Re-live the psychedelic 70s w/ the throwback Polychrome Phaser. 4HP analog circuit adaptation of the 6-stage phaser section from the Italian stallion - Farfisa Polychrome.

FREQ | the initial frequency of the phaser

RES | the depth of the phaser effect

RATE | the speed of the internal LFO, range from X hz to X Khz

MOD AMT | how much the internal LFO will affect the frequency. If an external signal is plugged into the CV input, this knob will instead control how much that external signal will affect the frequency.

MOD AMT LED | red/green bi-polar activity indicator of internal LFO or external CV

IN JACK | your audio goes in here

CV JACK | use an external signal to control the frequency, thus bypassing the internal LFO

OUT JACK | the audio output of the phaser

TR1 | trimmer for initial Frequency adjustment

TR2 | trimmer for LED adjustment


Includes a 10-pin to 16-pin Eurorack ribbon connector

4HP Module width
47 mm Module depth
33 mA on +12V
34 mA on -12V
0ma on 5V (not used)

The Polychrome Phaser pairs well with:

G-Storm Electro 101-VCO
Digital oscillators like Pittsburgh DNA Symbiotic Waves and SE Grainy Clampit
GSE 2xADSR – use envelope CV for some deep bass modulation
Sample Player module like Erica Synths Sample Drum

CLICK FOR MORE »

Re-introducing Tonus VCF r3 Eurorack Filter Demo ARP 2600 4012

video upload by gstormelectro

"Audio + Video by G-Storm Electro c. 2022

Tonus VCF is back by popular demand.
Still that faithful Eurorack filter adaptation of the early MKI ARP 2600 synthesizers that you know and love w/ some minor improvements.
Sound sources | Capt'n Big-O + Pittsburgh Primary Oscillator B
Recorded direct, no other mastering or effects.

Tonus VCF is a eurorack modular adapation of the ARP 2600 mk1 filter (4012).
Check my Reverb store for availability and other cool modules"

*REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info.

GSE 2xVCA Comparison of versions 1, 2, and 3 Eurorack

video upload by gstormelectro

"Audio + Video by G-Storm Electro c. 2022

Introducing 2xVCA version 3.
This time using BA662F chips.
Version 1 used BA6110.
Version 2 used openlabs BA662 clones.
Is there any difference in sound between these versions?
This is a simple comparison showing all 3.
Recorded direct, no other mastering or effects.

Check my Reverb store for 2xVCA version 3 availability"

*REVERB* http://reverb.com/shop/gstormelectro

Note Reverb links are affiliate links. See the site's privacy policy for more info.

OB Damned: OB-6, Modular with G-Storm Electro XaVCF, JUNO-6, JX-3P, TR-6S, PRO 2 (80's jam in C maj)

video upload by thesrabbit

"With all the excitement generated by the new Oberheim teasers, I thought it might be fun to do a jam with some classic Oberheim sounds. But really, this is really just an excuse to use this ridiculously complex Eurorack / Pro 2 patch that I made. It's a 4-note paraphonic patch, with each VCO in the rack being modulated by a sine wave from the Pro 2 (each individual Pro 2 oscillator is sent out of CV Ports 1-4). I'm also running the VCO outputs back into the Pro 2's CV inputs to modulate each oscillator's frequency and get true cross mod. Then I've got 8 VCO outputs (4 sawtooth and 4 square wave) going into the G-Storm Electro XaVCF, an OB-Xa filter clone, which is in LP 2-pole mode. With all that signal going into it, it produces a heavily overdriven sound, even without the resonance cranked. None of the sound is coming from the Pro 2 as it just acts as a modulation source. Classic 80's Oberheim sounds are coming from the OB-6, obviously. On bass is the Roland JUNO-6, and the JX-3P gets pad duty. Everything gets a heavy dose of Audiothingies Doctor A delay and reverb, except for the drums, which run through the MIDIVERB II for that nostalgic 80's gated reverb (preset 31, if you're wondering).

I didn't rehearse this jam, just programmed a couple drum parts and went for it, staying in the key of C major the entire time, because the black keys are too hard to find in a jam for someone with my sub-par abilities. Also, having to use the octave keys on the OB-6 would throw another wrench in that I just can't really manage to deal with in a live situation. It's a shame, because the Eurorack patch sounds badass in F, hitting the bottom key on the Pro 2's keyboard. So if I had changed it up, it would have been going down to F and then coming back to C. Too advanced, I know.

Gear Summary
Modular: Eowave Titan Discrete Oscillators (x2), Roland System-500 512 Dual VCO, 530 Dual VCA, 540 Dual Env/LFO, 555 LAG/S&H, G-Storm Electro XaVCF and Spring Tank Reverb driver, modulated by the DSI/Sequential Pro 2 Synths: Sequential/Oberheim OB-6, Roland JUNO-6 and JX-3P
Drums: Roland TR-6S
Effects: Audiothingies Doctor A, Alesis MIDIVERB II"

Boss RE-202 Space Echo [Pedals w/ Synthesizers #12] Demo + Observations

video upload by gstormelectro

G-Storm Electro:
**LISTEN/DOWNLOAD** http://soundcloud.com/gstormelectro
**BOOKMARK THIS** http://gstormelectronica.blogspot.com/

Audio + Video by G-Storm Electro c. 2022

Today I'll demo some synthesizer sounds w/ the Boss RE-202 Space Echo.
And give some honest user opinions at the end.
Is this pedal worth it? Let's see.

Recorded direct, no other mastering or effects.
Just the RE-202 and various synth type devices one at a time.

This video was not sponsored by Boss.
The RE-202 was purchased out of pocket for my own fun.
All opinions are my honest impressions.

Timestamps
0:00 Opening Sounds + Intro
Audio Demos
1:33 w/ Eurorack
2:56 Univox Minikorg
4:11 Behringer RD-8
5:06 SH-101
6:49 Korg Poly-61
Closing
7:21 Observations

G-Storm Electro SH-5 VCF

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Amazing filter clone of the famous Roland SH-5 synthesizer! Bought a couple months ago from the G-Man along with some other stuff, everything he makes is excellent. I really like the sound and functions of this dual filter on its own, but I’m not sure it fits into my overall sounds and the overall tone of my half dozen other filters, so I’m listing it, but keeping his ARP 2600 filter clone!"

Check out demos in previous posts here.