"Hang On" with Roland Jupiter 8, Juno 60, Juno 106, JX-3P, Korg Porlogue, and TR-808

Published on Sep 25, 2019 Machiwoomiapoo

"'Hang On' with Roland Jupiter 8, Juno 60, Juno 106, JX-3P, Korg Porlogue, and TR-808
Hello Everyone! I was inspired to write this tune today. I used the Jupiter 8 on patch 35/12 in dual mode for the intro. Then I pre-programmed the TR-808 drum pattern and sync'd it to the MX-1. The Juno 106 provided the BASS on patch 48 with Chorus and the occasional Boss DD7 Delay/RV-5 Reverb. Next the JX-3P used the string patch to play the main them. The Korg Prologue used the "Fantasia" patch to play the minor section. Finally I used the Jupiter 8 Strings in a tune followed by the outro patches which began the tune. Thanks for watching! Take care, Sam."

24 09 19 Scrotum Lab - Mini-system & Machinedrum

Published on Sep 24, 2019 batchas

"I hooked up yesterday the Mini-system and the Machinedrum for a quick jam.
Grilles is clocked to the Machinedrum running Autechre beats.
The Grilles clocks the 2 Le Seq and trigs the 2 Radio Music, Tresses and Orgone Accumulator MK2."

"La Bellezza" (Dotcom, Synthex, D-50, Therevox, REDOX) Questions & Answers

2019/09/24 Questions & Sounds Published on Sep 24, 2019 SynthMania

"A few viewer questions / answers, and sounds from Synthesizers.com modular &Yamaha PSS-170"

See this post for the performance. Above video added there as well. You can find the Cowboys in Space video here.

Also featured:
Elka Synthex: syn strings
Roland D-50: choir
Therevox ET-4.3: syn lead
Kilpatrick Audio REDOX: effects

Reminder: VELOCITY - Seattle Synth Event Set for October 5th

Follow-up to this post where you can find a list of manufacturers planning to attend.

When: October 5th, 2019 from 11 AM – 2 AM. Presented by Modular Seattle + Patchwerks Where: Substation (645 NW 45th St)

Cost: Education (FREE) / Performances ($20 adv, $25 door)

VELOCITY is a brand new, all-day event revolving around modular / hardware synthesizers and the people who create with them. The first half of the day is focused primarily on education and a manufacturer trade show, with the second half of the day being all about live music.

11 AM – 4 PM:
DIY Workshops where attendees will learn about synthesizers through fun and engaging hands- on experiences.
Educational Presentations where speakers will speak on various subjects relating to electronic music and hardware.
Trade Show where different modular / hardware synth manufacturers will show off their latest gear and interact with the community.

5 PM – 2 AM:
Performances from local and out-of-town artists, with genres varying from house / techno, ambient, noise, industrial, and beat-oriented music.

Trade Show all ages, everything else is 21+. More info at: velocityseattle.com/

Modular Seattle is an organization devoted to electronic music, art, and community in the Puget Sound area, focused mainly on modular and hardware-based synthesizers and the people who create with them. We provide monthly performance events, educational lessons and workshops, and access to music-making technology.

Patchwerks is Seattle’s source for analog and digital music electronics, offering retail sales, education, and community events for musicians of all skill levels. We offer a variety of workshops and demo events, as well as a comprehensive lesson program covering a wide range of music production hardware, software and techniques. Visit our retail location at 3107 Eastlake Ave E, or shop online 24-7 at patchwerks.com."

Modular Seattle pics of prior events including Modular Nights & Modular in the Park:

CLICK FOR MORE »

Building the Super Sixteen Eurorack Sequencer

Published on May 30, 2018 Extralife

Links:
You can find the code, schematic and KiCad files here.
You can find Extralife on Patreon here if you would like to support his projects.
You cab download KiCad EDA 5.0 for free here: http://kicad-pcb.org.
For a detailed look at how to multiplex a grid of LEDs, check out this tutorial (a shift register is used instead of an i/o expander).

Playlist:
1. Designing a Eurorack Sequencer - Pt. 1: Digital to Analog

In this new series I'll be designing, prototyping and building a sequencer module for my eurorack sythesizer using the Arduino platform. In this episode, we connect the arduino to our 12v power supply and add a digital-to-analog converter output so our sequencer can output proper 0-8v CV signals.

2. Designing a Eurorack Sequencer - Part 2: Seven Segment Displays

Continuing to design and prototype the Super Sixteen sequencer module for my eurorack sythesizer using the Arduino platform. In this episode, we wire up a seven segment display to show some visual feedback using another serial chip, the I/O expander. Then we take a crack at making our sequencer play a scale!

3. Designing a Eurorack Sequencer - Part 3: Enter the Matrix

Continuing with the Super Sixteen, we build the sequencer's namesake sixteen-button grid, explore matrix wiring and multiplexing in combination, and construct our first working prototype that actually plays a sequence!

4. Designing Eurorack Sequencer Part 4: Making a PCB with KiCad 5.0

In this episode we get into some proper electronics design with KiCad and develop a new layout for a printed circuit board. Then we get to do the fun part and fabricate it at home using a toner transfer and ferric chloride etching.

5. Designing a Eurorack Sequencer - Part 5: Assembly

In this episode we assemble the first PCB prototype of the Super Sixteen with our trusty soldering iron and a spool of mod wire. After a few fried chips and more than a few repairs, it's time to wire it up to our synth and try out some actual sequencing!

6. Designing a Eurorack Sequencer - Part 6: Front Panel and External Sync

Or, "How to Make a Eurorack Front Panel: The Cheap Way"
In this episode we upgrade our module with a faceplate, and add some advanced features like external sync, pitch calibration, and glide/portamento.

7. Designing a Eurorack Sequencer part 7 - New PCBs, Motion Recording, Beat Repeat

In this episode, we assemble, inspect, debug, and reprogram our new dual-PCB stackup for the Super Sixteen eurorack CV sequencer. Not everything goes according to plan!

8. Designing A Eurorack Sequencer Part 8: New panel, Patch memory, Performance effects

In this installment we fabricate a new front panel for the Super Sixteen using the toner transfer process, and then take a spin with some of the new advanced features it sports, like patch memory, scale selection, swing timing, and a gang of performance rhythm effects.

Korg Monotron CV Input Mod (Eurorack Control Voltage hack)

Published on Sep 21, 2019 Extralife

"Hello friends! I'm back in California and back in action. First off the hop is a travel kit project to convert CV (control voltage) signals to Monotron-compatible pitch/gate signals. If you have a Monotron (the cheapest analog synth on then market) you can use it to add a complete synth voice to your eurorack system!

The schematics and PCB layout for this project are up on my github page:
https://github.com/matthewcieplak/mon...

This work is partially based on DINSync's 2010 monotron CV mod:
http://www.dinsync.info/2010/06/how-t..."

Rhodes Chroma CC+ Polyphonic Aftertouch Analog Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

This is the one in the recent videos posted here.

CLICK FOR MORE »

Roland Jupiter-6

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

GSE 101E Output Expander for 101-VCO Quick Demo (Roland SH-101)

Published on Sep 24, 2019 gstormelectro

"Audio and Video by G-Storm Electro c. 2019

Quick intro to my 101E Output Expander for my 101-VCO.
101E adds buffered, individual wave outputs from the 101-VCO.
I will show how to interconnect them.
And just a few things you can do with the expansion.

Links for more information...
101E https://www.modulargrid.net/e/g-storm...
101-VCO https://www.modulargrid.net/e/g-storm...
Buy http://reverb.com/shop/gstormelectro

Recorded direct to Tascam DR-05.
No additional effects or processing."

"Output Expander for GSE 101-VCO

Companion module for the GSE 101-VCO.
Adds 5 buffered, individual waveform outputs.

What you can do with the 101E:
- Send each waveform to a mixer and give them different panning in a stereo configuration
- Use the Noise for percussion apart from what the synth waves are doing.
- Send two waves to a dual VCA, and use modulation to crossfade them.
- Send the waves to different filters, each having their own sequence.
- Toggle different waves using a 1x4 sequential switch, or the GSE Infusor-X, for wavetable-like effects.
- Send two waves to a sidechain processor like the Worng LRMSMSLR.
- and much more!

This module requires the 101-VCO and Eurorack +/-12V power for operation.

Available exclusively in my Reverb store http://reverb.com/shop/gstormelectro

22 mA +12V
22 mA -12V
0 mA 5V
40 mm deep

$65"

Gotharman Releases Little deFormer 3 and Tiny LD Updates

Available at Gotharman's Musical Instruments, the update adds new resonator oscillators, smooth oscillators and microtuning. You can find demos here: New Oscillators, Resonators, Microtuning. Also see Gotharman's LD3: Color Of The Sky. Currently you can find all the demos and more on the first page for the Gotharman label. Posting the individual links for future reference as new Gotharman posts are sure to go up and make them more difficult to find in the archives.

Update 11.62 Details:

-New oscillator types: Smooth oscillators and Resonator oscillators.

-The 2 new oscillator types can be microtuned per key in an octave.

-More oscillator modulation destinations: Extra pitch modulation, Reso, Sample length and Portamento.

-Monophonic trigger system improved.

-Output Effects gain can now be adjusted.

Bug fixes:

-If linear envelopes were used, with different settings for each part, sometimes the settings of each part would interfere with each other, i.e. long attacks would appear on parts, that it was not supposed to. This has now been fixed.