Fun with Envelope Followers // Arbhar // Nautilus // Data Bender // Mutable Ears

video upload by LesjaMusic

"Trying out a new format. The first 4 minutes or so is the patch, the last minute is a quick patch explanation by yours truly.

Organelle into Mutable Ears. Ears envelope out into Nautilus resolution. Ears audio out into Arbhar scan input. Arbhar out into Data Bender and Nautilus then Vortices. Norns l_ll__l_ with some ambience.

0:00 Patch
3:51 Patch Explanation"

Sidraxia! Glitch inputs go wild with Palmelund Controller 🎮🎛️🤘

video upload by LesjaMusic

"The Sidrax glitch inputs, according to the manual:
'Two green jacks, that are 'glitch' inputs. They cause the boundary conditions of each oscillator to wire to the output of another. A modulation inspired by circuit bending.'

If you modulate the oscillator that is wired to the one with the glitch input (if you get my drift), you can get wild results. Off screen, Microcosm and Cocoquantus add to the fun.

#ciatlonbarde #sidrax #palmelundsynthesizers #hologrammicrocosm #cocoquantus #ambientcuration #synth_food #welcometospacelounge #haveyoubeenfound #ambient #ambientmusic #glitchmusic #bananasynth"

SH-101 // Djupviks The Qu // Sealegs // Gliss

video upload by LesjaMusic

"Djupviks The Qu proving it can do traditional phaser sounds as well as maniac dirt.L, with the help of Bela Gliss on modulation.

SH-101 reminding me no matter how many VCO/VCF/ADSR combos I buy, it’s still the ultimate monosynth.

Apologies for the sloppy playing - I’m better at programming synths than playing them.

Dirt and colour from Sealegs, Gen Loss, CXM 1978 and OTO Boum."

Norns // OB-Xa

video upload by LesjaMusic

"Very small sequencer meets very large synthesizer.

Monome Norns Shield, running the Fall script, sequencing my Oberheim OB-Xa.

Off-screen, some tone shaping is done by Intellijel Sealegs, Djupviks The Qu phaser, Chase Bliss Mood MkII, Chase Bliss CXM 1978, Chase Bliss Generation Loss MkII, and OTO Boum."

Djupviks Beneath The Bush of Ghosts // Data Bender // Cocoquantus

video upload by LesjaMusic



Two pics via Reverb

LOFI quad sampler ISD1820 ic

DIY pcb and panel only as of 03 MAR 2023.

Beneath the Bush of Ghosts is a 26hp Quad Lo-fi sampler based on the ISD1820 IC chip which is an old answering machine chip. This module is inspired by several other projects based on the ISD1820 chip. Each of the four channels are identical to each other with some sneaky normalisation going on between the channels for extra fun!

There is a mix output which combines all the dry inputs with the sampler outputs, while the individual outs of each channel only contain the sampler output. Each individual output is cross modulated with the channel next to it in pairs, so 1-2 modulate each other and 3-4 the same way. Each output is also normalled to the following input, 1-2-3-4 and 4 goes back to input 1. This means you can do generation loss (i.e. disintegrating loops) with some clever patching. Each channel has a filter with lowpass to the left and high pass to the right, as well as a pitch knob with a dedicated cv input and attenuator. There is also a dedicated trig input for each channel, and control buttons for the following functions: record in, momentary play and full play of the sample. The trig inputs need a +5v gate to operate. Samples can be played on loop by engaging the ‘Loop’ switch at the top of each channel.

Recording instructions: In order to record you need to turn the loop switch off, set the pitch to around the 10 to 2 o’clock (you can experiment with this), the CV knob will usually influences the sample speed so make sure it is fully CCW. Insert an input signal (or use the looping sampler next to it) and hit record, the LED will turn off while recording, and light up again when the memory of the chip is full. It’s a simple as that!

SH-101 // Sealegs // Organelle // Cocoquantus

video upload by LesjaMusic

"I went on holiday. I missed my gear."