Hyve Touch DIY Analog Poly Synthesizer in Walnut Case

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Awesome little pocket synth. Its about the size of an ipad mini. Comes complete all in tact. Hyve Synth, Battery, Tuner, Cord Card and Case. Perfect gift for that EDM geek in your life or synthesizer enthusiast collectors. MAJOR Cool sounds!

Slide your fingers across the surface to explore new ways to touch sound. It’s a 60-voice polyphonic analog synthesizer that is controlled by pressure, horizontal, and vertical movements of each finger on the surface. Even the smallest wiggle of your finger makes the sound come alive, giving expression to the music you make.

The Hyve was designed to be immediate and accessible. You don't need to know anything to start touching sound.1. Plug in power and headphones 2. Touch the surface 3. Slide and explore."

CLICK FOR MORE »

Gator Synth - Physical Modeling Resonator (Rings Clone)

via this auction

"All modules were hot air soldered, flashed, and extensively tested at my workbench. Panels are laser cut acrylic sourced locally from the University of Florida Fab Lab. Premium soft knobs. Power headers are shrouded (keyed) to prevent improper connection, and the modules include 25cm Eurorack power cables."

Cool clear plexi panels.

CLICK FOR MORE »

Sequential Circuits Prophet-5 Rev. 3 SN 4599

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This Prophet 5 is in really nice shape, is fully functional, and sounds great. There is some wear with scratches and a few small dings, with most of it on the bottom. It has been retrofitted with MIDI capabilities and also recently serviced by a local technician.

Services Performed:
Disassemble keyboard completely
Clean and replace all grommets under keys
Repair several J wires
De-oxidize all key contacts
Re-level keyboard
Remove and replace all power related tantalum capacitors
Resolder all stake type connectors and de-oxidize all inter board connectors
Repair MUX control system in front panel
Clean all potentiometers
Re-mount transformer
Replace power cord
Replace lithium battery for memory
Check basic operation of MIDI (early 90's Kenton type midi, transmits on ch#1).
Re-oil and clean case, repair several stripped screws
Repair several previous internal repairs that should have been done better
Check operation"

CLICK FOR MORE »

Hordijk 5U Format Standard System Modular

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"A one of a kind system made by Rob Hordijk."

CLICK FOR MORE »

Elby Euro-Serge 6U System

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Elby eurorack system using mostly Serge licensed replica modules (and a Doefper A-110-4!). All modules include banana jacks or have been slightly modified (i.e. not irreversbly; a single contact was moved on the jacks of the VCS, Chaotica, and A-110-4—connectors fit quite nice and snug) to permit banana jacks. Lightly used otherwise, most modules bought direct from Elby. Powered wooden case by Dutch Modular SynthLabs. This is a full complete system designed to exhibit the most functionally-dense, multidimensional Serge modules (which only banana jacks can really exploit—e.g. system can be programmed for the availability of seven different audio-rate VCOs) into the portable, travel-friendly 6U 2x84hp eurorack format. Also includes DIY 0V ground jack attached to power bus which allows interfacing with external equipment."

CLICK FOR MORE »

Protein FM Synthesis (Sonicware Elz_1)

Published on May 20, 2020 J. Dylan Proctor

"Enjoy some fm synthesis while you learn about protein synthesis. Music is made with a Sonicware Elz_1, a Microkorg, and a Korg Volca Kick"

Arpeggios!

Published on May 20, 2020 Pete McBennett

"This is that little Nano board with the eight stylus keys from a couple of my other videos. It's good for experimenting with code. I got rid of the volume knob because I needed room for a couple push-buttons. It still has the trigger output for the filter, but I wanted to show the little gizmo by itself! It's so fun!"

Metroid Music - Ridley Boss Battle Theme (Synth Cover + Tutorial)

Published on May 20, 2020 GLASYS

"A live cover of the Ridley boss battle theme from Super Metroid (SNES) followed by a breakdown of my arrangement. I've been getting lots of questions about how I play all the parts simultaneously, hopefully this explanation will help.

More Metroid music coming soon!

Gear used: Sequential Prophet XL, Moog Matriarch, Studio Electronics Boomstar 4075, Native Instruments Battery 4, Arcadia custom controller."

Sequential Pro 3 & Eventide Space

Published on May 20, 2020 3rdStoreyChemist

FLAME MÄANDER 2.0 - OVERVIEW & TUTORIAL #TTNM

Published on May 19, 2020 THE TUESDAY NIGHT MACHINES

"Here is an overview and 'getting started' tutorial for the FLAME MÄANDER wavetable & filterbank synth.

♥ SUPPORT: http://bit.ly/ttnm-support ♥

TIMECODES:
0:03 Introduction
0:33 Connectivity
1:34 Front Panel Mode, Menu & Keyboard Buttons
2:02 Wavetable Synthesizer
4:15 PWM Pulse, Saw and FM Oscillator*
4:48 Other Synth Parameters
6:29 ADSR & LFOs
7:48 External Audio Input
8:04 Noise Oscillator
8:24 Analog Filterbank
10:36 Stereo Filterbank Effect
11:46 Sequencer
13:05 Shots Panel
15:36 Analog Filterbank Part 2
18:12 Envelope Mode
18:37 Random Mode
19:10 Track Mute
19:35 Upcoming Video & See You Soon :)"

FLAME MÄANDER posts by THE TUESDAY NIGHT MACHINES