MATRIXSYNTH: Friday, October 26, 2018

Friday, October 26, 2018

A few cool Wavestation SR patches

Published on Oct 26, 2018 SynthMania

"Demos of ten patches from the Korg Wavestation SR, streamlined but still very powerful (and with lots of banks) rack Wavestation unit from the early '90s

0:17 Leaving the Pod
1:00 Vocal Highlands
1:57 Slow Pad
3:06 Life Goes On...
4:10 Amazon Life
4:51 Purple Haze
5:54 1 Finger L.S.O.
6:45 The Wave Police
8:00 Jazz Guitar
8:50 Sicilian Theme"

MFB Tanzbär 2 (Unboxing / Reactions / Sounds) TANZBAR 2

Published on Oct 26, 2018 alternatingbitmusic

"My first reactions to this long anticipated drum machine from MFB, the Tanzbar 2 !!!"

First night with the MFB Tanzbär 2

Published on Oct 26, 2018 alternatingbitmusic

"Just a brief sequence I made... having fun with this thing already."

TR707 + TB303 + SH01a + VolcaFM +RE20

Published on Oct 26, 2018 Honeysmack

Moog One Unboxing, Fan Noise, & Demo

Published on Oct 26, 2018 Synthient Sound

This one is in via Soviet Space Child.

Note the fan noise at 8:20. Apparently it's going to be addressed in an update.

"Moog One the most awkward style possible. ;)"

Moog One Presets A-C (no talking, no room mic)

Published on Oct 26, 2018 Synthient Sound

"Moog One presets from 1892 Horror Film to Clavinott. More preset videos to come!

The Moog One was recorded from its outputs straight into a Focusrite Clarett 2Pre into my Macbook running Logic Pro X and combined with the video in iMovie. There are no room mics going or talking.

No effects (compression, EQ, reverb, etc) were used outside of the Moog One. I made no attempt to balance volumes, so you hear them as they are. I just noodled, playing a little bit of each preset, then using the Mod Wheel and X/Y Pad to see what they did. I hope you enjoy!"

KAWAI GMega MIDI Expander Synthesizer Demo, Review, sound programming

Published on Oct 26, 2018 Floyd Steinberg

"Table of contents below! The KAWAI GMega is a Roland SoundCanvas Clone released in 1992. This is a tabletop General MIDI sound module with sound editing possibilities. In this video, I'm playing all the GM sounds (I'm sorry) and also dive into the menus to program a sound. I tried my best to make an impressive intro song with this for this video, using only the GM sounds.

At this time, this is the only detailed GMega video on Youtube ;-)

Table of contents:
0:00 Intro/Demo
2:13 Bla bla
2:58 Playing some sounds: pianos and keyboards and organs
6:36 Guitars
7:01 Basses
7:57 Strings
9:30 Choir
9:42 Brass & woodwind
10:14 Pads
11:32 Drum sets
12:38 Sound programming: basic setup
14:59 Filter setup
18:30 Envelope setup
19:54 Result & conclusion

If you want to listen to the intro music again, you can also find it here:"

Korg M1R Music Workstation GUIDE BOOK on a Keyring

via this auction

Never seen one of these before. How many other synth manuals / guide books came on a key ring?

Synth Dust Cover for Roland SH-1 Synthesizer

via this auction

Revealing dust cover.

See the seller's other items for more.

Synth Dust Cover for Roland CQS-100

via this auction

Quick, pull your pants up!

Like synth underwear.

See the seller's other items for more.

Birdkids-The Bateleur VCO with expander and delay mod.

Published on Oct 26, 2018 Dziam Bass

"Hi Guys.
I have today a small movie from The Bateleur VCO plus Expander from birdkids.
I did not chase a typical trip through the waves and filter so I thought I would do it slightly in the musical context for other demo modulations will be short time but I captured here a small part of the awesome filter page. Bass is very juicy, with resonance seems to me very attractive and immediately tell the oscillator itself sounds awful for me. I added some modulated delay as you hear later a little fun with a glide that is built-in and abnormally on FM. The oscillator itself is the decks of great sounds but as I mentioned in the next films.
of course, I added with the beat for a better listening, but you can hear loud voices or headphones in the very characteristic depth for this oscillator is its great advantage.
The Birdkids have decided to make a decent sound and appreciate it."

Let me introduce myself... My first two keyboards..Casio VL1 + Casio MT68

Published on Oct 26, 2018 synthartist69

"I would like to take the time to introduce myself. My name is Jim, and yes I am a synth addict. These are my first two keyboards.. a Casio VL1 and MT68...Thank you everyone for supporting my channel over the years!"


Casio MT68 "That 80's sound!!

Published on Oct 26, 2018 synthartist69

"Well, it's not a Jupiter 8 but this will have to work!"

Erica Synths- PICO Quant 3HP quantizer for eurorack demo

Published on Oct 26, 2018 Dziam Bass

"Small demo PICO QUANT -Quantizer from Erica Synths.
This module is very important to me in my eurorack system because it is responsible for melodies and scales.
Has 8 slots on the rock which allows me to switch between them with a single button. Pico Quantity is an advanced quantum accuracy and a web-based interface for creating user generated scales.
8 preset scales
Web based interface for user generated and extra preset scales
Microtonal quarter tone scales
Adjustable tolerance
Adjustable CV glide between notes
Clocked and independent quantization.
after connecting to the application, you can load many different scales. Then you can delete them and back up other ones, which gives you plenty of options every time you re-enter the module.
Knob Tolerance is to adjust the quantizer tolerance - the scope of the resume around the given memo CV, in which the module goes to the next stage of the CV.
The full CV setting gives 50% tolerance, in other words, the quantizer will move to the next note approximately half way between the notes; full CV setting gives 10% tolerance, which means that the quantizer will go to the next note when the incoming CV is very close to the CV of the note. See the illustration below. Tolerance control is particularly useful when a random resume or noise is used to enter the CV.
Thanks to this, we have the option of moving between the scales and changing its tolerance.
additionally there is a glide effect in the glide knob."

Sequential Prophet XL - Improv Group Jam

Published on Oct 26, 2018 Sequential

"A fun 100% improvisational performance with Domi Degalle on Prophet XL, Peter Dyer on Prophet-6, and Nick Semrad on Tempest. They'd never played together before, so we put a camera on them and said go! No rehearsals. This was the result.

Prophet XL info:"

William meets the Moog One

Published on Oct 26, 2018 suitandtieguy

"My friend William McCarthy came over and spent some quality time with the Moog One. He made the sounds and then merged them into a split preset, and then recorded it with his iPhone and a Roland Go:Mixer. Drums are MPC-1000"

Vintage Gambitt TX-70 Modo Synth

Published on May 31, 2018 fernando Costa Tecladista

This is the first post to feature the Gambitt TX-70. Also check out the Gambitt GMX.

Gambitt TX-70 Modo Synth
Tx 70 - sintetizador da gambitt / synthesizer
Outra Vez / Roberto Carlos - Isolda


Published on Oct 26, 2018 BoBeats

"2 years with the Minilogue and here is my review. Get 2 months free with SKILLSHARE:

If you want my 100 Minilogue patches you can become a Patron over on"

TEST SERIES Eventide Eclipse with Make Noise Mysteron Eurorack Sound Design

Published on Oct 26, 2018 Outsider Sound Design

"A single Mysteron patch being processed through different Eclipse presets I have made or modified.

The purpose of 'TEST SERIES' is to focus on the sound design possibilities of various gear combinations. This series is not musical nor does it serve as an instructional video. It is all about sound potential.
Please consider supporting this channel by purchasing a sample pack or music download from"

Skeletal Modular Workspace?

Cool Halloween pic via CONTROL. They are having a 10% off sale as well.

"Revel in the modular crypt! Now until midnight on November 1st -- get 10% off your cart with code CREEP10

From your fellow ghouls at Control."

IZOTOPE Studio feat. Al | Bo - Oblivion (Live Synthesizers Session of October 2018)

Published on Oct 26, 2018 Izotope Studio

"Традиционно уже живая игра, аналоговый микс.
Если нравятся мои работы - подпишись, оставь лайк и коммент, поделись с друзьями - и новые приколы не заставят себя ждать =З
Live workflow as usual"

Vintage Casio - CasioTone 101 Demo

Published on Oct 26, 2018 fernando Costa Tecladista

"owever simple it may be
is well built
good touch keys, good workmanship, has original leather pouch
internal speaker has a pleasant sound"

Modal Electronics 002 with Original Leather Sides

via this auction

Roland SH-2 SN 993020

via this auction

ROLAND Roland EF-303 Groovebox Synth Sequencer SN ZN70815

via this auction

Vintage Roland SA-09 Saturn 09 Synthesizer Keyboard w/soft case

via this auction

Asama DS-3 Drum Synth

via this auction

Another clone of the Coron DS7.

Moog One: Deep Dive - Patch From Scratch (Live from the Moog Factory)

Streamed live 2 hours ago Moog Music Inc

Starts around 15:00.

"Today we have Nick Valente, a Moog Instrument Specialist building a patch from the ground up."

Polyend Seq firmware update v2.0

Published on Oct 26, 2018 Polyend

Synth cat: Where do they go?!

"Dear Seq users, the firmware update v2.0 is now officially released and available on our website together with the updated manual.

Changes include:
- Per-track tempo divider/multiplier,
- MIDI channel input settings,
- The start button resets the cue point for all the tracks.
- Per track step retrigger.
- Ratcheting now works on the whole length of a step.
- Added new roll Velocity Curve - Random.
- Added roll Note Curve - each step in the roll's length will trigger notes in a scale set to the particular track - Flat, Inc, Dec, Inc-Dec, Dec-Inc, Random.

We'd like to let you know, that it isn't the last update. We'll keep improving the firmware, and let you know about the progress."

ALM Busy Circuits Quaid Mega Slope and MCO Updates // Synthfest 2018

Published on Oct 26, 2018 DivKidVideo

"It was great to see Matthew from ALM Busy Circuits at Synthfest 2018 and get an update on some of his new modules. Both the Quaid Mega Slope and the MCO are coming along soon with the Quaid offering some mega modulation possibilities and the MCO a tonne of wavetable tones with sub and PWM/mod over the waves in a small and cheap package."

Livestock Electronics Bang *FIRST PATCH*

Published on Oct 26, 2018 DivKidVideo

"As with all my *FIRST PATCH* videos this was literally the first patch I made with Bang from Livestock Electronics. Here it's going through a low pass gate / LPG and playing against some drums for a quick and exploratory look at the great range of tones that Bang creates. Full video demo soon."

Spooky Jam - Hexinverter Eurorack Modular Dungeon Jams

Published on Oct 26, 2018 Hexinverter Électronique

"Time to get spooky! :D

Patrick from Kindest Cuts lays down some spooky jams on the modular to get that Halloween vibe going in the dungeon!

Elektron Digitakt controls the whole setup through a Mutant Brain module, plenty of Mutant Drums and a bunch of other eurorack.

Check out Kindest Cuts here:"

02-The IK Multimedia Uno- Part 2: Oscillators

Part 2 added here.

The Legendary Korg MS-20

Published on Oct 6, 2018 murderousmaths

"A detailed introduction to the Korg MS-20 showing how the patchboard gets the most fun from the filters, VCOs, VCA, noise generator and ring mod!"

A track created only by a human voice and the PIPE.

Published on Oct 26, 2018 Vlad Kreimer

"The video demonstrates possibilities of the PIPE as a multitimbral instrument. All sounds from the drums to the pads were created only by the PIPE and my voice without any additional FXs."

Sonic LAB - Hex Inverter Mutant Brain MIDI Converter Eurorack Module

Published on Oct 26, 2018 sonicstate

"Edd takes a look at the new Hex Inverter Mutant Brain MIDI to CV and Gate and Trigger. Programmable functionality for multiple uses."

Böhm Digital-Drums | German Linndrum | Free samples included

Published on Oct 26, 2018 Espen Kraft

"Dr.Böhm, the organ manufacturer released this 'German LinnDrum' in 1983 under the name Böhm Digital-Drums.
Extraordinary disco vibes can be had from these lo-fi, but still glittering drums. They come best to life when sequenced internally from this unit.
Together with the attached analog accompaniment unit and keyboard you can achieve instant Italo Disco/Giorgio Moroder hero status!

All the samples from the Böhm can be found here, in one big Wav-file 24bits, taken directly from the stereo out. All sounds recorded twice and you'll have to edit this yourself, but hey, they're free! :)"

The MJ-12 handmade synth.

Published on Oct 25, 2018 Rarebeasts

"Soundart instrumental by Brian McNamara"

Like a little white UFO robot.

"The MJ-12 is a 3d printed synth designed and handmade by me.

Apart from looking adorable this synth is super simple to play and has a huge range of sounds.
All is required to get started is a USB power supply(PC or phone battery packs are perfect) and something to to hear the sounds, this can be as simple as a set of headphones or an amplifier. A speaker with an aux input is perfect.

The MJ-12 has three controls, The first varies the frequency of the output, the second modulates the output and the third shifts the frequency the 2nd 3rd and the 4th waveform to be slightly off tone.

Output: 3.5mm socket (Use with earphones, a computer sound card, mixer or amplifier)
Power: USB (Plug into a computer, phone charger or wall socket). No internal battery.
Case: 3D printed ABS"

Patch n Tweak

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.