Tuesday, March 19, 2024
Poly sequence without sequencer on KORG R3 synthesizer
video upload by Jake
"A song combining several sequences on a KORG R3 synthesizer without sequencer thanks to the Motion Sequencer
The R3 is a bi-timbral synthesizer.
Although it does not have a sequencer per se, it has the "motion sequence" function.
If motion sequencing allows you to automate a parameter over 16 steps, it can be dedicated to the pitch of the notes.
We thus have 2 sequences for the same patch, each controlling its own tone.
On timbre 1, in order to make the sequence more complex, I allocated each of the 2 filters to its own oscillator. Thus on timbre 1 the slow variations of LFO 1 control filter 1 in positive and 2 in negative.
LFO 2 is synchronized to the motion sequencer in the form of a sawtooth wave to simulate a filter envelope trigged to the note
On tone 2, LFO 1 in the form of a square wave at slow speed allows the sequence to be transposed to the seventh at 0.75 hZ.
LFO 2 has the same function as on timbre 1
Recorded in one take without any external effects"
Live session - KORG R3 - KAWAI SX-210 - CASIO CZ-1
video upload by Jake
"Live recording 2020
Synthesizers used for this track
KORG R3 - digital synthesizer - 2007
CASIO CZ-1 - Phase distorsion digital synthesizer - 1986
KAWAI SX-210 - analog synthesizer - 1983
This recording is the first track you can hear on my last album
'Compact Music Vol.2'
This album have been mastered by Angel Freddy - http://www.moloski.com
You can buy this album
https://www.discogs.com/fr/release/28...
https://jacquesjeangerard1.bandcamp.c...
"
A Rat, a DB-01 and a Light pedal cranked for filth and feedback
video upload by Richard DeHove
"I've always wanted ferocious feedback on a synth, just like them geetar players get. The obvious choices are a FreqOut or even an old Boss FB-2. But how about a Gamechanger Audio Light reverb pedal and a Rat ? One reason I got the Light pedal was its interesting modes, gate and drive. By itself a lot of the options feel very underpowered when fed by the DB-01. But add a Rat after the reverb and everything comes alive.
Here I first try the Light pedal's Reflect mode which is a dirty delay, then the Feedback mode. The Rat is vital to crank the Light pedal's effect although it does add a huge amount of noise. Ideally I'd add a noise gate after the rat and then a delay. Perhaps even a pitch shifting delay to try to get a little more pitch control over the feedback.
With it's little Rat friend the Light pedal now seems a lot more useful.
As usual there's absolutely no other audio processing than what you see.
0:00 Starter sound
1:25 Reflect cranked
2:42 Light pedal options
4:48 Feedback mode
8:28 Sequenced feedback
9:25 Keys feedback
Lots of downloads for supporters on Patreon: https://www.patreon.com/richarddehove
Many thanks to my kind patrons who keep this channel ad-free My website: https://richarddehove.com/"
Manual Dexterity
video upload by Todd Barton
"An unfolding of this patch over on my Patreon: https://www.patreon.com/synthtodd"
Update:
Manual Dexterity unfolded
video upload by Todd Barton
Sequential Pro 3 ► Sound Demo [30 MINUTES]
video upload by Mr. Card
Contents:
00:00 10 minutes of sound exploration
09:34 Brass sound
13:39 Pad sound
17:51 Paraphonic sound
22:06 Sweet sequence
26:39 5 minutes of sound exploration
Sequential Tom Oberheim Dave Smith OB6 variable state SEM filter.❤ (Hydrasynth EP)
video upload by Dave Bellamy
"I just adore the Sequential Tom Oberheim Dave Smith OB6 variable state SEM filter.❤ (Hydrasynth EP)"
Elmyra2 Revisited with Imitor, Melotus & Desmodus Versio
video upload by Cinematic Laboratory
"It's been two months since I supported the Elmyra2 launch wave. But it's not gathering dust. It's maturing like good wine. This video doesn't add much to the first one, except I'll be using a lot more CV and starting RAW with no effects. Indeed, it reminds a bit of the Lyra-8 sonically, but the Elmyra is much easier to control and there's no built in FM. You'll need a masterclass for Lyra-8, but you can just play Elmyra and make dark organic drones, textures and music. I've included some short Lyra-8 snippets for you to compare. Elmyra 2 can't go to the high notes, where Lyra-8 can go higher than you can hear. So I will not compare them, but enjoy them both."
Octatrack Performance Mixer 3.0: 64 Custom FX, Live Looping, and more!
video upload by EZBOT
"The Octatrack Performance Mixer 3.0 Template is a game-changer for live electronic music performers, offering an intuitive and meticulously crafted toolkit for creating dynamic and immersive live performances with your favorite drum machines and synthesizers. There are 20 all new effects not seen in any previous performance templates. With an 8-bar or 4-bar structure that syncs seamlessly to the Octatrack's clock or an external clocking source, this template provides a vast array of effects, including synced modulation, noise risers, comb filter risers, sidechain pumping, stutter effects, filters and more, all accessible with user-friendly controls. It empowers performers to build tension and deliver impactful drops effortlessly, while also offering the flexibility to customize compressors and fine-tune the sound to their liking. This template like the others before it is built around two input busses with discreet effects for both. Input A/B is your DRUM or PERCUSSION bus, and input C/D is your MELODIC bus. Each have there own separate compressor and freeze delays. Whether you're a seasoned artist or just starting your journey in electronic music, this template offers an inspiring and versatile platform to elevate your live performances and captivate your audience with mesmerizing soundscapes.
Download the Template here: https://ko-fi.com/s/c71520e99c and here https://www.patreon.com/ezbot
Get 10% Modbang cables with code: EZBOT23
SHOP HERE: https://www.modbang.com/modbang-shop"
Roland TB-303 computer controlled Bassline How To Make Acid Techno Chicago house Music
Note: Auction links are affiliate links for which the site may be compensated.
video upload by tonetweakers
"Programming a Roland TB-303 pattern. Here’s the properly refurbished 303 we recently sold and shipped to the repeat customer who bought it (thanks as always!). What’s your favorite 303 track? One of ours is Let Me Go By Heaven 17 - they rocked it back when it was new, long before acid house and techno!"
https://tonetweakers.com
Tone Tweakers eBay | Reverb
video upload by tonetweakers
"Programming a Roland TB-303 pattern. Here’s the properly refurbished 303 we recently sold and shipped to the repeat customer who bought it (thanks as always!). What’s your favorite 303 track? One of ours is Let Me Go By Heaven 17 - they rocked it back when it was new, long before acid house and techno!"
https://tonetweakers.com
Tone Tweakers eBay | Reverb
2024 Crumar Spirit
Note: Auction links are affiliate links for which the site may be compensated.
via this listing
"One of only 100 Crumar Spirits created this year by Crumar in Italy. Identical to the original 1980s Crumar Spirit (codesigned by Bob Moog), in every way – except this one includes MIDI.
Very rare synth. Sounds amazing. A chance to own a future-perfect Crumar Spirit. Will ship internationally at the buyer's expense if needed. I am in Continental Europe."
Video in the listing by Hainbach previously posted here.
via this listing
"One of only 100 Crumar Spirits created this year by Crumar in Italy. Identical to the original 1980s Crumar Spirit (codesigned by Bob Moog), in every way – except this one includes MIDI.
Very rare synth. Sounds amazing. A chance to own a future-perfect Crumar Spirit. Will ship internationally at the buyer's expense if needed. I am in Continental Europe."
Video in the listing by Hainbach previously posted here.
Roland MC-202 MicroComposer
Note: Auction links are affiliate links for which the site may be compensated.
via this listing
Additional CONTROL Listings
"Fully tested, perfect working condition. Includes 9V PSU for US and Japan outlets."
via this listing
Additional CONTROL Listings
"Fully tested, perfect working condition. Includes 9V PSU for US and Japan outlets."
Roland TB-303 Devil Fish SN 091 w/ Custom Colored Knobs
Note: Auction links are affiliate links for which the site may be compensated.
via this listing
"Roland TB-303 Devil Fish(mod #91 by Robin Whittle, 2000, see mod details on inside of back cover) in perfect working condition. Cosmetically it doesn't look nice, with lots of scratches and very worn paint, but it still sounds amazing. Please contact me if you can accept its external condition, or need to see more images of the Devil Fish. I've owned it since the late 90s and had the Devil Fish mod installed myself back in 2,000 by Robin Whittle in Melbourne, Australia.
Mod details: 32 memory banks + custom coloured LEDs + filter input for external audio signals + internal CV/Gate, slide in, filter in, accent in."
via this listing
"Roland TB-303 Devil Fish(mod #91 by Robin Whittle, 2000, see mod details on inside of back cover) in perfect working condition. Cosmetically it doesn't look nice, with lots of scratches and very worn paint, but it still sounds amazing. Please contact me if you can accept its external condition, or need to see more images of the Devil Fish. I've owned it since the late 90s and had the Devil Fish mod installed myself back in 2,000 by Robin Whittle in Melbourne, Australia.
Mod details: 32 memory banks + custom coloured LEDs + filter input for external audio signals + internal CV/Gate, slide in, filter in, accent in."
Tom Oberheim SEM Pro SN 0543
Note: Auction links are affiliate links for which the site may be compensated.
via this listing
"*The real deal with MIDI interface AND patch panel*"
via this listing
"*The real deal with MIDI interface AND patch panel*"
Teisco S-100F Synthesizer 100F Vintage Analog Monophonic Synth SN 0563
Note: Auction links are affiliate links for which the site may be compensated.
via this listing, also on Reverb
"Presenting the Teisco S-100F Synthesizer 100F, a vintage analog monophonic synth that stands as a testament to classic sound design and versatility. Rest assured, this unit is FULLY WORKING, ready to transport you back to the golden era of analog synthesis.
Featuring a single VCO, the Synthesizer 100F delivers a rich array of sonic possibilities, with sawtooth, square, and noise waveforms at your fingertips. Additionally, external sounds can be seamlessly integrated and manipulated through the synth's filters and envelopes, offering boundless creative potential.
Despite its monophonic nature, the Synthesizer 100F offers ample modulation capabilities to breathe life into your sound. An onboard LFO can modulate the VCO, VCF, and VCA, while the resonant filter can be further shaped by various modulation sources, including the LFO, Envelope 1, external input, or even the VCO itself.
With a comprehensive VCA section complete with Attack, Decay, Sustain, and Release controls, as well as a Hi-Pass filter and portamento effect, the Synthesizer 100F provides all the tools necessary for crafting classic analog bass, lead, and synth sounds with ease.
Sporting the iconic wood side panels and an intuitive front panel layout, programming the Synthesizer 100F is a breeze, allowing for straightforward access to its wealth of features and functions."
via this listing, also on Reverb
"Presenting the Teisco S-100F Synthesizer 100F, a vintage analog monophonic synth that stands as a testament to classic sound design and versatility. Rest assured, this unit is FULLY WORKING, ready to transport you back to the golden era of analog synthesis.Featuring a single VCO, the Synthesizer 100F delivers a rich array of sonic possibilities, with sawtooth, square, and noise waveforms at your fingertips. Additionally, external sounds can be seamlessly integrated and manipulated through the synth's filters and envelopes, offering boundless creative potential.
Despite its monophonic nature, the Synthesizer 100F offers ample modulation capabilities to breathe life into your sound. An onboard LFO can modulate the VCO, VCF, and VCA, while the resonant filter can be further shaped by various modulation sources, including the LFO, Envelope 1, external input, or even the VCO itself.
With a comprehensive VCA section complete with Attack, Decay, Sustain, and Release controls, as well as a Hi-Pass filter and portamento effect, the Synthesizer 100F provides all the tools necessary for crafting classic analog bass, lead, and synth sounds with ease.
Sporting the iconic wood side panels and an intuitive front panel layout, programming the Synthesizer 100F is a breeze, allowing for straightforward access to its wealth of features and functions."
1984 Roland Jupiter 6 61-Key Synthesizer
Note: Auction links are affiliate links for which the site may be compensated.
via this listing, also on Reverb
via this listing, also on Reverb
Sequential Circuits Prophet 2000 owned by H. Hancock?
Note: Auction links are affiliate links for which the site may be compensated.
video upload by
via this listing
"This one was used by the great Herbie Hancock for a concert in Rome in the late 80.
(It was Signed by Mr.Hancock on the front panel...unfortunately a little faded after all over 30 years)
8x analog VCF, 8x analog VCA, extended memory,
unusual for the keyboard version - 8 individual outs are installed.
Everything works great except for one of the eight individual outputs,
which does not play, however the main outputs Left, Right work perfectly.
Anyway, it plays beautifully. The instrument comes with a hard case.
The original Italian owner made a video - demo, which is in the link below."
video upload by
via this listing
"This one was used by the great Herbie Hancock for a concert in Rome in the late 80.
(It was Signed by Mr.Hancock on the front panel...unfortunately a little faded after all over 30 years)
8x analog VCF, 8x analog VCA, extended memory,
unusual for the keyboard version - 8 individual outs are installed.
Everything works great except for one of the eight individual outputs,
which does not play, however the main outputs Left, Right work perfectly.
Anyway, it plays beautifully. The instrument comes with a hard case.
The original Italian owner made a video - demo, which is in the link below."
gear heads know #lofibeats #chillmelodies #pink #synth
video upload by PANTōNE VU
Looks like a pink Love Hultén creation. I'm not finding this specific one in the archives.
Robust 🦸♂️ (Roland TR6S Rhythm Performer // S1 Tweak Synth // J6 Chord Synth) Synthwave
video upload by 2-Minute Warning
"In the wake of my previous video, here's a synthwave-like jam featuring the same 3 little boxes from Roland: the TR-6S (Drums), the S-1 (Bass) and the J-6 (Arp/Chords) 😉
The track starts with a drum pattern from the TR-6S where I only used the TR-707 Analog Circuit Behavior engine (I.E. no static 707 samples), modeling the quirks and instabilities of the analog envelope and amplifier stages that came after the D/A converter 🤩 (the TR-707 was PCM based, but still had some randomness thanks to the analog part after the D/A converter).
I also used the DRIVE master effect of the TR-6S to add some dirt and energy (the DRIVE somehow also act like a compressor).
I recorded 3 DRUM patterns (2 main parts and 1 break) but as I used the probability, sub probability, parameter-lock features etc. the drum patterns seem to be longer than 1 bar!
Then come the BASS (played by the S-1, I recorded 4 patterns which are 4-bar long for this) and the ARP/CHORDS played by the J-6 (I decided not to sequence this instrument as I wanted to trigger it live and bring some organic fluctuations to the track 😊).
For the sync part, the TR-6S is sending MIDI to the S-1, and the S-1 is sending analog clock to the J-6 (there was no need to start the J-6's sequencer as the ARP/CHORDS were triggered in real-time)."
Vinyl chops on the EP-133 KO ll
video upload by Q Noise
"Sampled a Jazz record that I picked up recently and made a beat with the EP-133 KO ll."
Free Jazz with Zazou and Korg piano Grand
video upload by Kaona modular music
"Kaona Skippy Live + Skippy + Zazou + Korg Piano Grand. You can see the Zazou control at 2:16."
CUNSA v/s FUMANA: The same patch on two different filters!
video upload by Frap Tools
"A few years ago we animated a bass line through Fumana for a short video. It was a cool experiment, so we decided to do a step-by-step guide. And then we thought that it would be fun to replicate the same patch concept on Cunsa, a totally different filter that shares with Fumana basically just the size. Which one do you prefer, if any?"
00:00 Introduction
00:35 Animate a bass line with FUMANA
04:50 Animate a bass line with CUNSA
dreadbox TELEPATHY Bundle Sound Demo (no talking)
video upload by Limbic Bits
0:00 Intro Electronica
2:17 Telepathic Drum Machine
3:35 Broad Pad
4:32 Torn Electronica
7:25 4ttf Fundamentals
8:32 Oberpad
10:04 Pad Repeater
11:16 How it ends
Korg MS-50 Autoplay #1: part 5/5 | sequential patch #korgms50
video upload by Dr. Kunz
Korg MS-50 Autoplay
"Fifth and last part of a sequential patch with VCO and VCF cross-modulation, combined modulation voltages, rhythmic pulses and two independent audio outputs. Different level settings in the Adding Amplifier can produce a variety of patterns from the combination of two envelope curves and a pulse, displayed on the voltmeter. The remaining free modules can be integrated to further expand the patch complexity.
This video is a fraction of an hour long experiment around this patch, I've shortened and divided it in five parts to make it more accessible. The wiring is presented at the beginning of each video.
Thanks to @IppeiTambata for his inspirational looping machines.
Effects: Yamaha SPX-90II stereo echo, Korg SDD-3000 short modulated delay, some level and eq adjusting on the Mackie 1402.
Recorded with Tascam DR-60 MKII
00:00 start
00:07 movement #5
00:19 wiring list
01:48 pattern variation
02:56 pattern perturbation
04:10 pitch and pattern alteration
05:13 timbre dissolution
05:44 Pac-Man resurrection
06:05 final obsession"
All parts:
3/17/24 (bass version) ElectroComp EML 200 + Lexicon PCM 70
video upload by Cfpp0
"Some more RoboCop from the ElectroComp EML 200. Similarly hysterical patch as in the previous 3/17/24 EML 200 video, but more of a bass version this time, with lower tuning on each VCO, different on times for the spring reverb running into the switch, and a bit less swung."
Asking synth manufacturers to say the F word...at London Synth & Pedal Expo
video upload by mylarmelodies
"Being a collection of interviews I shot at the London Synth & Pedal Expo '24, after they hired me to cover the event. The format was up to me. So I put the SAME two questions to industry folks at the show: 1️⃣ What is your favourite thing you sell? 2️⃣ What your favourite thing you DON'T sell?"
CHAPTERS
00:00 The Journey Begins
00:41 Divkid
02:44 Endorphines
03:53 Knobula
06:07 Lord Morts Thoughts
08:29 Nick Batt - Sonic State
11:29 Signal Sounds
14:35 ASM/Arturia
16:52 Scanner & Daniel Troberg
18:12 KMR Audio
19:51 ALM Busycircuits
24:05 RYK Modular
26:14 Enjoy Electronics
27:41 Erica Synths
29:04 PWM Synths
31:08 Journey's End
Good people make for good events and good gear, so lets meet them // London Synth & Pedal Expo 2024
video upload by DivKid
"What an amazing weekend we've just had! Here's a video with some of the people at the London Synth & Pedal Expo 2024. Held over this past weekend (Saturday and Sunday the 16th+17th of March 2024) in Studio 9294 in Hackney Wick, the London Synth & Pedal Expo is a free to attend show with plenty of synths, modular and pedal FX on show for people to come and play with.
As it takes good people to make good events (and the good gear we love) I wanted to focus on the people, asking who they are and what they do, more specifically how would they explain what they do to someone with no idea about synths, pedals and music tech. That led to some funny answers, all spread around various bits of b roll and footage from the event."
Nibbler Bassline | Schlappy Patching with Stazma
video upload by SCHLAPPI ENGINEERING
"Episode 5 for Schlappy Patching!
In this one I'm going to show you how to use the "clock divider" patch from the Nibbler manual, but at audio rate, to generate some funky basslines that are always in tune with your main VCO!
I'm also going to patch a big fat kick drum and a sidechain circuit using Interstellar Radio, 100 Grit and a few Boundary to go with these basslines.
It's going to be fun!"
00:00 Intro
00:51 Nibbler science
02:20 Let's patch the bassline
08:00 Let's patch a kick drum
09:53 Let's patch a sidechain (and jam)
12:47 Let's make the bassline an arpeggio
13:35 End tlak and more jam
Modular Synth Sampler | Make Noise Morphagene
video upload by Akihiko Matsumo
Morphagene Reels from : https://akihikomatsumoto.bandcamp.com...
Make Noise Modular Synth Sample Pack: https://akihikomatsumoto.bandcamp.com...
Intro to "Child in time" played with GSi VB3-II
video upload by Guido Scognamigli
"The intro to "Child in time" by Deep Purple played with GSi VB3-II - original record version.
Get VB3-II at: https://www.genuinesoundware.com/?a=s...
Download the preset from the cloud (license owners only)."
ADDAC System - ADDAC813 Stereo Mixer+
video upload by DANIELE
"ADDAC813 Stereo Mixer+5 features 5 stereo channels, 4 of them with attenuators, a mono send/return path for parallel processing plus stereo and mono outputs. Th mono send/return path allows for easy integration of mono effects in a stereo chain!"
0:00 Intro
0:08 Main features
0:30 Pre-fader mono effects loop
1:02 Granular freeze
1:17 Line or synth level
2:06 Mono filter on stereo drums
2:54 Mono filter on plucked strings
3:52 Mono distortion on stereo VCO
"ADDAC813 is a straight forward stereo mixer. Featuring 5 stereo channels, 4 of them with attenuators, a mono send/return path for parallel processing plus stereo and mono outputs
Four channels with stereo input and gain knob. Fifth channel with stereo input without gain knob, which are the prefered inputs to cascade several ADDAC813s when more channels are needed. Master Output controls the level of the Inputs mix. Two leds monitor the inputs mix.
Mono Send / Return return path allows for easy integration of mono effects in a stereo chain. Plug your favorite module through it (filter, bbd delay, spring reverb...) or any mono pedal.
The Return Gain works in parallel with the Master Output, just like regular wet / dry controls.
The send output can be configured to be line or synth level via a jumper in the back.
Stereo output sums the Inputs Mix with the Return signal.
The Mono output is the sum of Left and Right outputs
Effect Pedals
Using the send output at Line level, the user can connect the send output directly into mono effect pedals and have the pedals output connected directly into the return input without the need of an attenuator/amplifier module."
03 18 24 Synton Fenix
Introducing GForce VSM IV
video upload by GForce Software
"The organic-sounding VSM IV (Virtual String Machine 4) is an intuitive yet highly powerful string machine synthesiser that’s the perfect solution for creating the sound bed of your next track.
VSM IV comes with 1900+ presets, including 200+ new patches and over 11.5 GB of data, enabling you to craft your own unique synthetic strings.
More info at https://www.gforcesoftware.com/produc...
Credits:
Graphic Animation: circa78designs (https://www.instagram.com/circa78desi...)
Music: poly.data (https://www.instagram.com/poly.data/)"
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
