ST Modular - MIA 2x2 Channel Mixer

Published on Feb 6, 2020 Stefan Tretau

via http://www.st-modular.com/mia.htm

Details:
•2x2 Channel Mixer
•Volume Control for each Channel
•2 Channel Fader
•Fader Volume
•Wrong polarity protection
•Skiff friendly
•3U Eurorack module, 5 HP wide
•Power consumption: 35 mA at +12 V and 25 mA at -12 VThe module consists of two boards:
•Front PCB Panel
•Main PCB

MIA 5HP 2x2 Channel Mixer with Fader MIA is a fairly simple, but very handy 2x2 channel mixer with an optional fader output. CH1 & CH2 have two input jacks with VOLUME control potentiometers each. The signals inserted here will be mixed and supplied at the CH1 & CH2 outputs. Simultaneously the signal will be routed to the FADER. The summed signal of channel CH1 & CH2 will be available at the FADE output. Using the Fade potentiometer you may mix the two channels to taste. The overall FADE volume may be adjusted using the FADE VOL potentiometer. If there is a cable plugged into the IN A or IN B jack, the connection of the mixer channels to the FADER is interrupted. Thus you can mix 4 sound sources and fade two additional signals at the same time. Originally this mixer was designed to mix several VCO waveforms with the ability to route each of the mixed signal (from CH1 OUT & CH2 OUT) to external modules, such as effects and filters, and then again mix the externally proccessed signals (using IN A & IN B) to one single output (FADE out) via the fade circuitry. In some cases it might even serve as a stereo mixer.

CLICK FOR MORE »

Roland Juno 60, JX-3P, and Elektron Machinedrum Part I

Published on Feb 5, 2020 MIDERA

"K__G__B__ and MIDERA collaboration

Both the Juno 60 and JX-3P were sequenced using sync out from the Machinedrum. Drum parts were synthesized by the Machinedrum.

Strymon Volante was used with the Juno 60
Eventide Blackhole and Reaper delays were used with the JX-3P"

Sequenced Hougaku Conductors

Published on Feb 5, 2020 wildchurch

O2 Minipops (clock source) audio out runs through filter
O2 clock sent to multiples and dividers to sync the following:
- 2 Hougaku Conductors each with its own 16 step sequencer and patchwire matrix for key triggering
the 'Conductor Mini' also has a built in pitch shifting delay effect (Sentinel by Arnoud Philip - see here: http://effectslayouts.blogspot.com/20...) and is running through a Zoom B1on multi FX
the other Conductor runs through a NUX Mod Core pedal
- LMNC drum sequencer with Wav Trigger
- Boss DR220-A
- LMNC step sequencer for CV control of the filter through which runs the O2 MiniPops
Boss RV-3 for reverb on mixer send/return

Video in two parts
1. clocked 'self-playing' system
2. twiddlin' & tweakin' - generating birdsong with filter resonance

The PERfourMER Jam - All sounds from Vermoan PERfourMER MKII

Published on Feb 5, 2020 While We Were Sleeping

00:00 Vermona PERfourMER MKII - Jam
04:22 Vermona PERfourMER MKII - On its own
05:05 Sampling the drums

"I was working on a new track using only the Vermona PERfourMER MKII as a sound source. This is all sounds including drums. I used my Akai MPC Live to sample the drums and record the bass and synth tracks. I just started using an AKAI LPK25 Wireless MIDI keyboard and the sense of freedom from wires overwhelmed me with joy. It was so much fun and it was Jamuary after all so I recorded this on the morning of New Years Day.
The Vermona PERfourMER MKII is a four voice analog synth with Mono, Poly and Duo mods. It has varies wave shapes including noise so I could use it to generate drums. The main melody uses the PERfourMER in Poly mod (you can hear it on its own after the jam) and the live lead is using it in duo mode, so two oscillators per note."

Too soon?

Published on Feb 5, 2020 SynthMania

With the original Access Virus.

KORG Wavestate Synthesiser: Wave Sequencing Tutorial

Published on Feb 5, 2020 Noisegate

"In this video we explore the concept of Wave Sequencing 2.0 as introduced by Korg’s new Wavestate synthesiser, and break down various methods of building new sequences from a blank template."

Sequential Pro 3 Multi-filter Mono Synth at Winter NAMM 2020

Published on Jan 20, 2020 Sweetwater

Sequential Pro 3 overview and demo with Dave Smith.

https://www.sequential.com/product/pro-3

Additional posts featuring the Sequential Pro 3

Peter Dyer Sequential Pro 3 & See Val Drum

Published on Feb 5, 2020 peterkeys88

"Practice Makes Blurfect - Ripped my friend Val Franco's drum practice IG vid, and put some Sequential Pro 3 (beta) over it. Quick and dirty Ableton movie chopup, from old iphones because who cares, its fun. All sound sources, apart from the drums, are from 6 Pro3 patches. Also Darth Tater."

8Dio EverWave Articulation Walkthrough

Published on Feb 5, 2020 8dioproductions

"8Dio EverWave is our latest custom-built instrument. We spent nearly two years building a one-of-a-kind physical instrument together with a master Luthier in Europe, Greece. The end result is one of the most motion picturesque and large sounding instruments we've ever heard.

EverWave is exclusively available at 8dio.com and will be released February 6th 2020."

Update:

8Dio EverWave - Demo Walkthrough


"8Dio EverWave is a special one-of-a-kind physical instrument - exclusively designed for the purpose of deep-sampling. We spent nearly two years together with a master Luthier in Greece to build the instrument, which consists of a complicated array of strings and resonators.
Published on Feb 6, 2020 8dioproductions

More information at https://8dio.com/instrument/custom-in...

0:27 Everwave Offical Demo
2:55 Intro/History
4:35 Track Breakdown
4:58 SFX/EbowsArticulations
5:22 Ebow 2 Articulation
6:10 Articulation Stacking
7:07 Bow Articulation
8:49 Track Breakdown Intro Section
11:11 Hybrid Tools Teaser
11:50 Track Breakdown Everwave isolated
12: 40 Microphone Options
13:30 SFX Articulation Jazzy Section
14:40 Century Ostinato Strings II Advanced Patterns
14:56 Ebow 2 Articulation + Fingers
15:27 Making Custom Patches/GUI Walkthrough
17:03 New Library Sneak Peak"

The MS 2600 NG ARP 2600 DIY Project by Matthias Beese

MS2600NG Vlog Published on Feb 5, 2020 acidjack303

"Cit´s Synth´Gera Vlog . MS2600NG Episode.

The MS2600NG is a german Synthesizer DIY Project by Matthias Beese. There is only a small bunch of a few DIY MS2600NG on the Market. The MS2600NG is a Enhanced Full Size Clone on the legendary ARP 2600 Synthesizer. For more details of this Synthesizer go to the MS2600NG Webpage.

In this Vlog Episode i show you some of the Great Features and Sounds the MS2600NG offers."


Published on Jan 30, 2020 acidjack303

"I show you the great MS2600NG Synth in action, without talking !!!. #synthgearvlog #ms2600ng #arp26000"

Additional details in German: https://diy-mms.jimdo.com/ms-2600-ng-arp-clone/, Googligoo here

This project combines two projects in one synthesizer.

1.) The replica of an ARP2600 based on the original service documents.
2.) The expansion of the classic by a few functions and modules.

The MS 2600 NG is therefore the result of the two points mentioned above.

(The "NG" in the name stands for "NextGeneration" and the new features)

I started the project in 12/2016. The development and construction time was approximately 1 3⁄4 years.

The upper part is almost 1: 1 the original. I added a GATE function to the envelope follower. VCO1 and VCO2 have a SYNC input and the frequency-determining transistors of all VCOs are given small heaters so that they are kept at a constant temperature (frequency stability). VCO3 has also received a TRI and SINE output, as well as a PWM input. The MIXER has been expanded by one channel (VCA2).

In the lower part there are the following new groups (from LEFT to RIGHT):
Midi IN (2 * GATE + 4 * CV)
Sequencer with quantizer
ARSR and AD2
DUAL-8Bit Wavetable VCO
MultiMode VCF
VCA 2

The loudspeakers are realized as 'BOX in CASE', ie they get a closed housing with bass reflex opening in the lower part.

There are 5 basic boards, primarily with mech. Components are equipped (slider, sockets, switches, LEDs, buttons etc.), but also contain a few passive components and uncritical circuit parts. This makes the board size easy to handle and you don't have to unscrew everything when servicing.

The boards are mounted on the front panel with the many jack sockets (approx. 130 pieces).

The individual circuits are housed on the 16 module boards, which are then plugged onto the motherboard."

CLICK FOR MORE »