MATRIXSYNTH: Thursday, December 27, 2018

Thursday, December 27, 2018

OB-6 vs. Prophet-6 (Pads) // PATCH MATCH™ (No Talking)


Published on Dec 27, 2018 MR TUNA Music

"It's an all-new episode of PATCH MATCH FROM SCRATCH™, once again featuring the incredible OB-6 and Prophet-6 analog synthesizers from Dave Smith Instruments.

These two are some of the most comparable synths on the market today, especially considering they are both built off of the same platform, with almost identical feature sets. That's not to say they sound the same at all, though: there are some pretty distinguishing characteristics and features that really set them apart.

We'll try to match 'em up as best we can, and then if you're hanging around we'll explore some of the differences.

Check it out, and let me know what you think."

Vintage Korg Sigma Synth SN 243362


via this auction

Moog Sonic Six - first look


Published on Dec 27, 2018 SynthMania

"A great vintage early 1970s machine - the Moog Sonic Six synthesizer
00:00 Introduction
00:29 The original owner from 1971
01:57 Front panel and controls description
04:36 Trumpet / brass sounds
06:06 Flute / whistle sounds
07:12 Clarinet / oboe sounds
08:05 Classic Moog lead sound
10:02 Classic Moog bass sound
12:34 Sound effects: wah-wah
13:41 Sound effects: siren
14:36 Sound effects: wind, surf fx
15:37 Sound effects: ring modulator
18:08 Conclusion"

Follow-up to this post.

tyuiop


Published on Dec 27, 2018 justin3am

"Dark, dubby and damaged. First track with Waldorf Quantum. Sequenced with Elektron Octatrack. Make Noise Tempi/Rene V2 controls Shared System, Audio Damage Seq1 controls 0-Coast."

Calm Cloud Music with AE Modular Synth + iFretless Bass + Volt (in HDR on supported devices) #TTNM


Published on Dec 27, 2018 The Tuesday Night Machines

"Here’s an ambient music jam with the AE Modular Vactrol Low-Pass Gate and State Variable Filter modules :) They sound awesome! Plus some iFretless Bass and Volt synth noodling on the iPad. MORE INFO BELOW :)

---------

PixelNoises Synth T-Shirts by The Tuesday Night Machines:
https://shop.spreadshirt.co.uk/pixeln...

---------

Audio gear used:
- Tangible Waves AE Modular Synthesizer (check it out!!!)
- iFretless Bass iOS synth
- VOLT iOS synth

I sent a wavefolded triangle wave into the new AE Modular State Variable Filter (SVF), which also self-resonates and receives the same pitch CV as the triangle VCO. I also patched the bandpass output into the CV2 input of the SVF to get a different waveform from the self-oscillation. The result runs through the new AE Modular LOPAG vactrol lowpass gate module, for plucky percussion sounds. Then there are a bunch of other VCOs, the Lofi Delay and MultiFX Shimmer Reverb. I sequenced everything the with 16 step sequencer, S&H and Clock Divider.

Afterwards, I played some iFretless Bass and VOLT synths on top on the iPad."

Novation and Korg short jam


Published on Dec 27, 2018 rudeog

DEX5MBER 4: Yamaha EX5, EXIDO1, some pedals - relaxed 100BPM synth jam


Published on Dec 27, 2018 Floyd Steinberg

"I found an EXIDO1 interface for my EX5 on eBay, which adds 2 stereo output jacks to this synth. Once installed, patches can be routed through individual audio outputs. In this example, I connected 3 different pedals to the synthesizer (ZOOM MS100BT, Strymon BigSky, Strymon Sunset).
This was played in one take, no overdubs. Just some overlay videos showing the installation & setup and other things. ;-)"

Moot Booxlé “Cars” | Behringer vs KARP Odyssey


Published on Dec 27, 2018 mootbooxle

"A little impromptu Gary Numan 'Cars' on two Odysseys, the KARP and the forthcoming Behringer Odyssey!"

Behringer Deepmind 12D - Sequence One


Published on Dec 27, 2018 AiynZahevSounds

"Thought I'd show the Deepmind a little in a similar style to my Moog Videos."

Rob Papen Live Stream 27 Dec 2018 - Ambient Sounds -


Streamed live 76 minutes ago Rob Papen

"The last live stream of 2018 with a chill out - Ambient - subject :D"

Suonopuro Synth Collection Review - Mark Steiner - NuEVI


Published on Dec 27, 2018 Mark Steiner

Suonopuro.net

Spike Jones meets the Mighty Buchla 200


Published on Dec 26, 2018 Todd Barton

Building a Eurorack Mechanical Modular Sequencer - Leaving the Laptop Episode 4


Published on Dec 4, 2018 Michael Forrest

"This video demonstrates a mechanical drum trigger based on the same principles as Graham Dunning's Mechanical Techno rig." [posted here]

And the full series of Leaving the Laptop:



Playlist:
The Problem with Laptops - Leaving the Laptop Episode 1 - A Series on Live Electronic Music
Post-Laptop Live Methods - Leaving the Laptop Episode 2
iPads and Volcas - Leaving The Laptop Episode 3
Building a Eurorack Mechanical Modular Sequencer - Leaving the Laptop Episode 4
Alien Techno Hands - Leaving The Laptop Episode 5

TIRACON 6V Analog Synthesizer (1987) Made in GDR - RetroWave


Published on Dec 27, 2018 RetroSound

"(c) 2018 vintage #synthesizer demo by RetroSound

all synthesizer sounds: #TIRACON 6V analog synthesizer (1987)
(TIRACON 6V sounds are self-programmed)
drums: LinnDrum (1982)
recording: multi-track
fx: reverb and delay

The TIRACON 6V is a rare six voice analog synthesizer made by VEB Automatisierungsanlagen Cottbus (former #GDR)

6 voices
1 VCO per voice + Sub-Osc, PWM, all waveforms can selected together
3 LFOs
24dB/Oct analog low-pass filter with resonance
sequencer
MIDI"

X1L3 - circuit bent Casio SA-46 - The Void


Published on Dec 27, 2018 X1L3

"Setting a scene in a melodic set using the midi retrofit and a couple of presets through filter and delay. Backing and percussion generated in the DAW. A proof of concept machine - the panels are homebrew matt blacked FR4 with legend scratched on. The real deal will be the usual screen printed pro affair.

Where to get and what's in there below:

Fitted with a monophonic midi interface. The board is polyphonic but the amount of routing and circuitry required to implement this via midi isn't doable in the space available. The compromise is still cool though, giving a mix of automation that can be played over, plus being a bent machine it can pull off all sorts of strange stuff when you spend a bit of time getting to know it. The standard format on the spectrum of nice to nasty - melodic to harsh noise all loaded up in this one.

It has a resonant filter, 'ruiner' ringmod/distortion and a digital delay configured as a circuit bent delay pedal might be - that is untethered feedback and filtering for texture and noise generation and manipulation. Also added is a global pitch control with fine and coarse dials.

A couple of other vids will no doubt be uploaded by the time or shortly after you see this. They'll illustrate the more volatile, unhinged and hands on nature of these things."

Marlin Synthetone / Jen SX 2000


via this auction

"This is a rare edition of the italian vintage mono synth JEN SX2000.
It's rebranded Marlin and for what I know it's a brand that distributed the synth in the UK.

This particular unit is in very good cosmetic condition, almost excellent. Very rare to find these cheap italian synth in that condition.

It is also perfectly working because I just serviced it:
- desoldered and cleaned the buss bar and key contacts
- replaced all the IC (and upgrade some with better ones without sacrifying original tone)
- cleaned and lubed all the faders
- calibrated and tuned"

Dave Smith Instruments MEK - Mono Evolver Keyboard Synthesizer


via this auction

Features:
Raw and wide-ranging blend of analogue and digital tones
Compact size and comprehensive user interface
Step sequencer and numerous modulations
External power supply
3-Octave keyboard (37 keys)

KAWAI MDK-7 Hypercat w/ Original Box


via this auction

Never seen one before. The MDK-7 Hypercat appears to be a MIDI controller only. Some specs from the listing below.

"Rare Kawai MDK-7 Hypercat Keyboard Controller in perfect like not used condition, in factory box with Japanese manuals and power supply 100-120V input, all functions tested ok, worldwide shipping!

Description:

Kawai MDK-7 is a Keyboard Controller For Computer Music it has the following structure:

- 37 mid size velocity sensitive keyboard
- 7 SEG x 6 LED display
- Bank select (MSB 128 x LSB 128)
- Pitch band wheel
- Assignable wheel (control change data & channel, pressure data, velocity data)
- Octave shift (4 octave up/down)
- Transpose (1 octave up/down)
- Transmit program change number & bank select
- Reset all controller / GM reset
- Midi IN merge
- Hold pedal jack"

TAMA TECHSTAR TAM500 Analog Drum Synthesizer SN 100611


via this auction

Korg Mono/Poly MP-4 Vintage Analog Synthesizer SN 377501


via this auction

Roland MC-202 Analog Groove Synthesizer


via this auction

ROLAND TR-808 RHYTHM COMPOSER ANALOGUE DRUM MACHINE


via this auction

Tom Modded Sequential Circuits DrumTraks Model 400 Vintage Drum Machine SN 0860


via this auction


"This unit was modified Individual Output for TOM."

Low & Hight Outputs
Pan Width & Pitch knobs.

Oberheim DX Drum Machine with Midi SN 081304


via this auction

"Factory midi installed (its one of the later models where midi was built in)
Cosmetically in nice shape, trivial scratches can be found, nothing major, please view.
Includes 9 additional eproms: long ride 0 - long ride 1 - long ride 2 - long ride 3 - conga - timbale - cowbell 64 - snare 64 - tamborine rimshot"

Oberheim OB 8 Vintage Synthesizer


via this auction

Angle Grinder Processing the Tom Cat


Published on Dec 27, 2018 SCHLAPPI ENGINEERING

"A demonstration of some of the sounds you can get when running drums through the Angle Grinder, in this case we try out some basic distortion and stereo effects with the Akai Tom Cat as input."

PO 33 Case Assemby and Review #po33 #beatmakeristhesquad


Published on Dec 27, 2018 Beat Maker Is The Squad
Update: video is back online.

"Recently I purchased a Teenage Engineering Po 33 KO. Since I have had it, I have literally not been able to put it down. It's almost as if I have been trying to make up for lost time for all of the time that I should have had this sampler. Anyhow in the short time that I have had it I learned that a case is probably the best option for the it because it's small and not enclosed at all. During a monster google and instagram search I came across the PO Case DIY Kit on www.dichstudios.com. For $23 this case is an absolute no brainer. It may seem intimidating at first to put together, but I can tell you that it is actually fairly easy, quick and straightforward."

Hacking Make Noise 0-Coast: 14 things you may not know it could do


Published on Dec 27, 2018 loopop

TIMELINE:
0:00 Intro
0:50 0-Coast basics
6:15 Let the hacks begin...
6:30 Playing the slope
8:35 Slope CV calibration
11:00 MIDI and CV control
11:40 Paraphonic jam...
12:40 Slope subharmonics
15:10 Contour subharmonics
16:10 Subharmonic chords
16:50 Clock subharmonics
19:25 Hidden slew
22:00 Envelope follower
23:10 Creating sidechain
24:30 Pulse width control
25:20 PWM?
26:05 LED scope
26:40 Krell to R2D2

Korg Prologue Custom Sounds part. 1


Published on Dec 26, 2018 DKS SYNTH LAB

http://www.dksynthlab.com
PREVIOUS PAGE NEXT PAGE HOME



©2019 Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH