NAMM2017: Introducing Catalyst Audio new Eurorack Modules

Published on Jan 19, 2017 Analogue Zone Showroom / Synths and Studio

"Introducing Catalyst Audio new Eurorack Modules

Catalyst Audio - Modul 158
Catalyst Audio - SH-IMPLE"

http://www.analoguezone.com/

New Euro Manufacturer Catalyst Audio Introduces Time’s Arrow Sequencer Eurorack Module

Published on Dec 7, 2015 catalyststudio

A new eurorack module from the recently formed Catalyst Audio. The playlist for the videos above follow. Full details on their first eurorack module, Time's Arrow, further below.

1. Times Arrow Cmin Basslines [CV/Gate/Accent to FutureRetro 777]
2. Times Arrow Video Manual Utility Mode
3. Times Arrow Vid Manual Seq Mode
4. Times Arrow Video Manual RND Submodes
5. Times Arrow Video Manual RND Mode
6. Times Arrow Video Manual Extra Features

via of Catalyst Audio:

"So.

What is it?

So at it’s most basic it is a 16 step sequencer,

It can do all of your normal sequencer functions etc...

But also-

What we think sets this apart from the other currently available sequencers out there right now (and yes there are a lot!) is it's randomization features. It was designed to basically allow you to start with randomness, and then to exert some level of control over this randomness until you start to get useable (but still unpredictable) results. A 'happy accident generator' maybe?

A very basic description would be that each step of the sequence contains information about 5 different 'events' Notes (CV value), Gate, Accent, Tie, and Slide. You can manually set up these events, like you would with a more traditional sequencer, but Times Arrow allows you to randomize any or all of these events either manually (button press) or via a trigger signal. Once a new pattern has been generated, that new pattern will continue to loop and will only be altered by another button press or trigger. Each "event" can have different probability settings, and each "event" can be set on a per step basis to be excluded from randomization.

It’s hard for me to feel like I can do justice to it in one or two paragraphs, so please check out the videos posted on our site www.CatalystAudio.com or feel free to ask me questions here and I will do my best to answer.

I will say that I have gotten some amazingly cool sequences out of this thing, stuff I probably would have never come up with on my own. (Of course I’m biased, both cause I created it and because my definition of an “amazingly cool sequence” is probably different from yours.)

It is currently available at Foxtone music right now, and should be up at Analog Haven by the end of the week.

Features
Adjustable seq length from 1 - 16 steps
Internal quantizer with 16 selectable scales
Constant time (303 style) slide
Buffered output voltages from 0 - 8v (8 oct range)
(Pre-quantizer) Transpose input
Reset to last step
Forward, Backward, PingPong, Pendulum, Random, and "Drunken Walk" seqencer directions
Firmware optimized for extremely low jitter and tight timing.
Synchronized randomization (manual or CV triggered) of Notes, Accents, Ties, Gates, and Slides, Alt CV and Octave Offset.
Independent probability settings of Notes, Accents, Ties, Gates, and Slides.
Independently remove any event on any step from randomization.
Sync/reset output
Random stepped CV output (0-5v)
Global transpose by semitones or octaves.
"Slip" sequences forward or backward in time.
Skiff Friendly
Awesome buttons.
Cat approved."

Catalyst Audio Buchla 100 Eurorack Modules

Published on Jan 2, 2018 Perfect Circuit Audio

"This video shows the Catalyst Audio Buchla 100 Eurorack Modules used together and with other modules. The Catalyst modules used are a 158 dual oscillator, 110 quad gate, 180 dual function generator, 106 discrete mixer, and 156 CV processor.

Available here: https://www.perfectcircuitaudio.com/c..."

Supporting members of MATRIXSYNTH get %10 off at Perfect Circuit Audio!

Catalyst Audio Buchla 100 Eurorack Sounds at NAMM 2018

Published on Jan 27, 2018 Perfect Circuit Audio

"Catalyst Audio was at NAMM 2018 with a whole system of their Buchla 100 modules in eurorack format and we were able to record some of the sounds that they can produce."

---

Supporters of MATRIXSYNTH get %10 off at Perfect Circuit Audio!

5 Second Interviews at Knobcon 2023

video upload by Gerbil Hamster Records

"Shits too long sometimes
Love ya!

|||||Links|||||
Buchla
https://buchla.com/

Hive Mind Synthesis
https://www.thekillerbeerelayteam.com...

After Later Audio
https://afterlateraudio.com/

CLICK FOR MORE »

BAF 2024: Catalyst Audio - MIG Modules

video upload by sonicstate

"At Buchla and Friends 2024, Sonic State had the opportunity to speak with David from Catalyst Audio about their latest release, the MIG series vacuum tube modules. This series includes a VCO, mixer, VCF, VCA, and a noise source, all designed around new old stock tubes from Soviet fighter jets in the 80s. David explained that the collaboration between Buchla and Friends and ElectroSurf led to the development of these modules, with ElectroSurf handling the tube circuits and David working on the layout and production. The MIG series modules feature unique waveform shaping capabilities due to the use of two tubes, allowing for audio rate switching and balance adjustments. The VCO, mixer, filter, and VCA all offer distinct tonal changes and features that can be overdriven for added versatility. The noise module provides a wide range of sound possibilities, from pitched variations to white noise textures. Currently, they have about 1,500 tubes in stock, making these modules a limited edition item. However, the tubes are perfect for Eurorack systems as they consume low power, making them compatible with standard power supplies. The final price is yet to be determined, but it is expected to be around $400.

https://www.catalystaudio.com/"

NAMM 2018: Delptronics, Pittsburgh Modular, Catalyst Audio, Malekko, KOMA, 2hp [Episode 39]

Published on Feb 13, 2018 CatSynth TV

"Odds and ends from the synthesizer corner of NAMM 2018 😺

Delptronics ThereMorph
https://delptronics.com/

Pittsburgh Modular Microvolt 3900
https://pittsburghmodular.com/

Catalyst Audio "Buchla 100" series
https://www.catalystaudio.com

Malekko Heavy Industry MANTHER
https://malekkoheavyindustry.com/

KOMA Elektronik (including Field Kit)
https://koma-elektronik.com/

2hp Modules
http://www.twohp.com/"

Catalyst Audio Buchla100 seq

Published on Jul 18, 2018 PaulLawlerMusic

"Sequencing the beefy Catalyst Audio Buchla 100 clones. You will need speakers to hear the depth"

Knobcon 22: Catalyst Audio Tube VCO, Noise, Mixer, VCF and VCA

video upload by sonicstate

"Catalyst Audio have a couple of tube based modules: VCO, Noise Source, Mixer, Filter and VCA.
The VCO and noise source actually use tubes to create the sound rather than 'warm them up'.
The VCO has a pair of tubes, one for each side of the wave which gives some interesting configurations of waveforms, with wave folding and PWM, plus a feedback path that adds some unique resonant shapes.

The noise source has a number of noise sources, with the option to tune the noise to sound a little like a fiilterbank (to my ears).

The Mixer uses a tube to add drive at the output stage.
They are aiming to be ready to ship by Jan/Feb 2023 - price tbc.
https://www.catalystaudio.com/"

Catalyst Audio Brings Buchla 100 Modules Back In Eurorack Format

Published on May 18, 2018 Synthtopia

"At Superbooth 2018, Catalyst Audio gave us an overview and demo of their line of Buchla 100 modules, which are based on the original 60's modules, but adapted for the Euro format."

Superbooth 2018 - Catalyst Audio Buchla 100 Series Modules in Eurorack Format

Published on May 5, 2018 DivKidVideo

"Dave from Catalyst Audio takes us through the Buchla 100 series modules he's remade in the Eurorack format. Looking at the current line of modules making up a voice as well as new modules to come including a new oscillator, sequencer and utilities. It sounds great, raw and plenty of character.

We're proud to have our Superbooth 2018 content sponsored by www.thonk.co.uk"

NAMM 2017: Catalyst Audio - Buchla Clone Modules and More

Published on Jan 21, 2017 sonicstate

See the Catalyst Audio for more.

Superbooth 2018: Catalyst Audio Buchla Eurorack Modules Sound Demo | SYNTH ANATOMY

Published on May 12, 2018 SYNTH ANATOMY

"At Superbooth 2018, Catalyst Audio presented Buchla clones for the Eurorack format. Here a short sound demo of these amazing sounding modules."

►Become a Patreon: https://www.patreon.com/synthanatomy

MiG Thruster Short Demonstration

video upload by epeasant

"This is a quick demo of the new Catalyst Audio Electroserf MiG Thruster vacuum tube noise generator module showing some of the sonic textures that it can produce.

The output of the Thruster goes to the MiG VCA module and then directly to the digital recorder with no external effects or modifications to the sound, other than a bit of resonance "crunch" added by the VCA near the end of the video.

The Catalyst Audio Electroserf modules are now available to purchase at quality synthesizer retailers."

True vacuum tube noise source

Low power draw

100% Analog

NOS Cold War Era Vintage Tubes

Internal feedback pathways​

CV control of major parameters

Catalyst Audio MIG series - synth modules with Soviet-era vacuum tubes

video upload by CatSynth TV

"We talk with David Small from Catalyst audio about the new MIG series of modules. They are based on vacuum tubes from Soviet aircraft The series.includes a VCO, VCF, VCA and mixer than can be used together for a full voice or independently to add a unique sound to a modular patch.

The MIG Series is currently in development and expected to be available this spring or summer. Follow catalystaudio.com for updates.

_________
Please consider supporting this channel to help us bring you more synthesizer tutorials and other content.
Merch: https://shop.catsynth.com
Patreon: https://www.patreon.com/catsynth
Ko-Fi: https://ko-fi.com/catsynth"

Tom Oberheim Coming to Knobcon Number Six

via Knobcon

Knobcon Number Six
September 8-10, 2017
Chicagoland
www.knobcon.com

"We are pleased to announce Tom Oberheim as guest of honour for Knobcon Number Six.

Mr Oberheim is the progenitor of the American polyphonic analogue synthesiser and designer of electronic music devices ranging from the Maestro Phase Shifter to the Oberheim DX drum machine. If you have listened to the radio in the past 40 years, it is impossible for you not to have heard sounds he had a hand in.

Tom will be speaking at the annual Knobcon Banquet as well as taking part in a live question-and-answer session hosted by Knobcon organiser Suit & Tie Guy.

Knobcon is a one-of-a-kind synthesizer convention now in it's sixth year. Complete with live music, workshops exhibitors and vendors, Knobcon allows for a fully immersive experience. Held just outside Chicago IL at the Hyatt Regency Schaumburg, the entire event takes place under one roof. If you are interested in electronic-based or experimental music and the tools used to create it, Knobcon is the place for you. The diversity and passion of the Knobcon experience make it enjoyable for all experience levels.

Admission for all 3 days is $50 at the door, $40 online during the month of August.
The Knobcon Banquet featuring Tom Oberheim’s keynote address is an add on to the standard admission. $50 per person, limited seating available.

Knobcon Exhibitors (as of 8/9/2017):

CLICK FOR MORE »

Knobcon 2025 SYNTHMANIA!! Walkthrough w / Interviews

video upload by Modular Wild

"Modular Wild Visits Knobcon 2025 SYNTHMANIA !! in Schaumberg , IL

00:00 Intro
00:14 Greetings
00:41 Hit the Road
00:44 Buc-ee's
01:22 Sunrise
03:44 Day 2 - Exhibit Hall
03:55 Infrasonic Audio / WMD "Cosmic Debris"
08:20 Frequency Factory
08:36 Scoopy Scoop Labs "Runę" Synthesizer
09:40 Submatrix BEETTWEEK
11:10 Otter-Mods Part 1 (aka tribute to old sonic state videos)
11:36 Catalyst Audio MIG Series Modules
11:59 A.M.P Products - Obliquencer and More!
19:15 Flashback
19:36 Synth City , Chicago
21:02 Erogrenous Tones
21:54 Vondle Synths
22:47 Drift DJ "Zero"
23:18 BOREDBRAIN
23:58 Fart Box 1 & 2 (or A and B)
24:53 Hive Mind Synthesis
26:00 Headbanger Heavy Metal Distortion

Dedicated to Leslie Rollins ,a fan, former friend, and Synth lover.

**as of 9-10 I am creating shorts for some f this longer video, please be patient while I get those posted later today and tomorrow. **

Help support my future work and tutorials , my goals include refining the video and audio production skills I have, reassemble a small Doepfer eurorack system, a tascam CD/DJ controller, and a new video camera in the interest of continuing making tutorials and demos for end users .

I'm grateful for gifts, but don't have a specific funding goal. no gift or donation is too small. If you wish to support my work with Modular Wild and Rauls’ World of Synths you may visit :
https://liberapay.com/raulsworldofsyn..."

3/5/25 Metasonix TM-1 SE + Buchla 292r 281 258d 244s + Doboz TSNM + Peavey DDL-3 + CXM 1978

video upload by Cfpp0

"For better or worse, we got into 4U Buchla format when we purchased the ZIMM system from Zerosum Inertia last year. And that purchase perfectly coincided with us liquidating the massive Tokyo Tape Music Center Buchla TTMC 100 eurorack system and TipTop Audio & Buchla 200 Eurorack system we had amassed over the years. One of the modules I missed was the handy 106 mixer. We had one by TTMC and one by Catalyst Audio. So we just got this Ebolatone CP-3 Moog mixer in Buchla format. This video was supposed to be a test of that mixer, but I got sidetracked."

Knobcon Number Nine 2021 Report

video upload by TJontheRoad

"Here's my Knobcon Number Nine 2021 report video. Jams and gear to hear and check out.

Thanks for watching.

Note, there is no paid promotion in this video.

CLICK FOR MORE »

Catalyst: hardware-style workflow in your DAW

video upload by Floyd Steinberg

"#CATALYST is a #VST plugin that claims to boost your musical creativity in your VST-compatible Digital Audio Workstation (#DAW). In this video, I briefly walk through that plugin's arpeggiator, harmonizer and step sequencer, creating a short "jam" or improvisation in the process. Table of contents:

00:00 introduction
00:24 what is Catalyst?
00:47 basic workflow and UI
01:07 add a synth plugin
01:32 arpeggiator
02:24 add root notes
02:56 harmonizer
03:33 creating a drum track with the step sequencer
04:27 add a bass track, using gate time and velocity control
05:13 adding a pad sound using the harmonizer
06:07 summary
06:48 a short improvisation
07:49 verdict / bye-bye

Relevant links:
Catalyst https://toneworks.io/
Hyperion https://www.hyperionsynth.com/
Sub (drum synth) https://sampleson.com/SUB-free-analog...

HÄLP ZIS CHANNEL
https://www.patreon.com/floyd_steinberg
https://floydsteinberg.gumroad.com/
https://floydsteinberg.bandcamp.com/""