Thursday, December 06, 2012
George Mattson Jamming on EML Electrocomp
Published on Dec 6, 2012 by thepluginguru
"On October 4th I travelled with a good friend towards Seattle to an unmarked home, somewhere in the back of the home is this room where all sorts of amazing electronic instruments are brought to life.... Here is the Maker, jamming for a moment. Oh and when I zoom over to all the Mattson Mini Modulars, those are all being used for what you're hearing as well :D"
http://mattsonminimodular.com
http://pluginguru.com
New Bleep Labs Da Funk in the Works
via Bleep Labs on Facebook which only states: "Soon!"
No word on what this is. I'm assuming that's a sawtooth waveform after the "da" and not an "m".
New Richter Oscillator II Coming from Malekko & Giveaway
"A MODULE GIVEAWAY? FINALLY!
It might seem like we've been ignoring the synth community, but, uh, you're wrong! We've been working on crazy, missile command-type stuff. Yeah, that's right! Really. Top secret. So don't ask if our digits have blisters…
Anyway, we are giving away a brand-new product! Unlike our last giveaway, this one will be fresh off the line, made one or two days before sending off to the lucky winner.
OK- it's an Oscillator II!
Yes, it's the Richter Oscillator II euro-rack module, featuring the cleanest waveforms in the business!
Built in Portland, OR, the Richter Oscillator II retains all the hallmarks of the original Wiard Oscillator yet includes the new TRI 2 output's super-clean wave and a push-button LFO switch! Refinements on the original are certain to make it a fan favorite across the globe!
Drawing entry is automatic when you share this post on your timeline with all the nerds in your life and "like" this page! The winner will be randomly selected from all entrants on Thursday, December 13th and posted via this Facebook page."
Grant Richter is the man behind Wiard.
12 days of Modular 2012-Day 6-Bit Crushing
Published on Dec 6, 2012 by raulsworldofsynths
"Day 6: A look at a Bit Crushing.Video series of 12 different scenes from the Modular World of Raul's World of Synths.Sound and Video by Raul Pena.©Raul Pena 2012"
All parts here.
ROLAND JUNO-106 SN 480235 with Analogue Renaissance Chips & Wood Sides
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"It was completely serviced and refurbished in autumn 20012:
- All 6 Voice-Filter-ICs 80017A and all 3 Wave-Generator-ICs MC5534A were replaced by the perfect clones of AnalogueRenaissance.
- All 34 tactical switches on the front panel were replaced by new ones.
- All 16 faders on the frontp panel were replaced by new ones.
- New VOLUME potentiometer.
- New back-up batterie.
- All keyboard contacts were cleaned.
- The whole unit was cleaned and the front panel was polished.
- Calibrated to the specifications of the service manual.
- Loaded with the original Sound-Set.
This JUNO is technically in extreme good conditions and it is prepared to work for many years. With the new voice chips there is no risk for dead voices (which is a well-known problem) and there sound is at least as good as the sound of the original chips. Because of the service there is no worry about jumping voice parameters, bad keyboard action, non-function of switches, cranckling VOLUME pot... Just play and enjoy it!"
via this auction
"It was completely serviced and refurbished in autumn 20012:- All 6 Voice-Filter-ICs 80017A and all 3 Wave-Generator-ICs MC5534A were replaced by the perfect clones of AnalogueRenaissance.
- All 34 tactical switches on the front panel were replaced by new ones.
- All 16 faders on the frontp panel were replaced by new ones.
- New VOLUME potentiometer.
- New back-up batterie.
- All keyboard contacts were cleaned.
- The whole unit was cleaned and the front panel was polished.
- Calibrated to the specifications of the service manual.
- Loaded with the original Sound-Set.
This JUNO is technically in extreme good conditions and it is prepared to work for many years. With the new voice chips there is no risk for dead voices (which is a well-known problem) and there sound is at least as good as the sound of the original chips. Because of the service there is no worry about jumping voice parameters, bad keyboard action, non-function of switches, cranckling VOLUME pot... Just play and enjoy it!"
LEL` CLAPPER RARE VINTAGE SOVIET ANALOG EFFECTS PEDAL
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"FEATURES & SPECIFICATIONS:The knobs: Timbre, Hall (Sustain), Sensitivity
Output: TRS 1\4 "jack" connector
Power source: Standard 9v battery (included)
Dimensions: 12x8.5x6 cm (4.7x3.3x2.4 in)"
via this auction
"FEATURES & SPECIFICATIONS:The knobs: Timbre, Hall (Sustain), Sensitivity
Output: TRS 1\4 "jack" connector
Power source: Standard 9v battery (included)
Dimensions: 12x8.5x6 cm (4.7x3.3x2.4 in)"
PAIA Gnome Synthesizer Module 3740
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Pics of the inside below.
via this auction
Pics of the inside below.
Roland Jupiter 6
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"The JP-6 was made from '83-85 and was one of the very first MIDI capable sythns on the market- considered to be one of the best analog synths of all time. Featuring 61 keys and an analog synth engine, the JP-6 has the ability to recreate any sound you hear in your head. 6 voice polyphony, 2 VCO's, a full selection of wave types, arpeggiator, 48 tone/32 patch memory...and much more. Plugging this in, I lost about 2 hours of my work day going through the sounds here. Everything from EVH's '1984' tone to vintage synth sounds to special effects were dialed in in seconds. This Roland has everything you need a knob or slider away. This JP is in excellent condition- tested and works as it should..."
via this auction
"The JP-6 was made from '83-85 and was one of the very first MIDI capable sythns on the market- considered to be one of the best analog synths of all time. Featuring 61 keys and an analog synth engine, the JP-6 has the ability to recreate any sound you hear in your head. 6 voice polyphony, 2 VCO's, a full selection of wave types, arpeggiator, 48 tone/32 patch memory...and much more. Plugging this in, I lost about 2 hours of my work day going through the sounds here. Everything from EVH's '1984' tone to vintage synth sounds to special effects were dialed in in seconds. This Roland has everything you need a knob or slider away. This JP is in excellent condition- tested and works as it should..."Spectral Audio ProTone SN 960191
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"A unique swiss made 2 oscillator monosynth with very flexible LFO. Capable of TB-303 type basslines with adjustable accent control of the filter, plus a wide variety of other unique tones can be made with this synth. It was the predecessor to the Neptune series, which sound very similar, but they made improvements in the build quality."
via this auction
"A unique swiss made 2 oscillator monosynth with very flexible LFO. Capable of TB-303 type basslines with adjustable accent control of the filter, plus a wide variety of other unique tones can be made with this synth. It was the predecessor to the Neptune series, which sound very similar, but they made improvements in the build quality."
CHEETAH MS6
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"The MS6's sound engine has a classic two-oscillator structure, each oscillator (DCO, or Digitally Controlled Oscillator, in MS6-speak) offering square, triangle and sawtooth waveshapes, and the second oscillator also featuring a noise option. The DCOs both have coarse-tuning controls, and DCO B can be fine-tuned, too. DCO A may also be synced to DCO B for creating sharp sync basses and leads.
Pulse width is independently adjustable for each DCO, and can be modulated via a dedicated 'DCO PWM Rate' parameter. This means that you don't have to tie up the main LFO for pulse-width modulation, leaving that free for pitch or filter duties. Another nice touch is that the synth's envelopes can be used to control the mix between DCO A and B.
In all, I'd say the MS6's source section is versatile and varied. But its 24dB/octave low-pass filters, offering cutoff-frequency and resonance parameters, with LFO, envelopes, key follow and aftertouch selectable as modulation sources, are really something special, as befits an instrument with Curtis chips at its heart.
If the name Curtis rings a bell, it's because Curtis chips are also used in Oberheim synths, and Sequential instruments including the post-1980 Prophet 5s. The Curtis package used here is the CEM3396, essentially a synth-on-a-chip, as found in the Oberheim Matrix 6/6R and Matrix 1000. This replaces the independent Curtis VCO, VCF and EG chips, employed in more expensive polysynths, with a single chip, resulting in a much more cost-effective arrangement that still carries that trademark Curtis sound."
via this auction
"The MS6's sound engine has a classic two-oscillator structure, each oscillator (DCO, or Digitally Controlled Oscillator, in MS6-speak) offering square, triangle and sawtooth waveshapes, and the second oscillator also featuring a noise option. The DCOs both have coarse-tuning controls, and DCO B can be fine-tuned, too. DCO A may also be synced to DCO B for creating sharp sync basses and leads.Pulse width is independently adjustable for each DCO, and can be modulated via a dedicated 'DCO PWM Rate' parameter. This means that you don't have to tie up the main LFO for pulse-width modulation, leaving that free for pitch or filter duties. Another nice touch is that the synth's envelopes can be used to control the mix between DCO A and B.
In all, I'd say the MS6's source section is versatile and varied. But its 24dB/octave low-pass filters, offering cutoff-frequency and resonance parameters, with LFO, envelopes, key follow and aftertouch selectable as modulation sources, are really something special, as befits an instrument with Curtis chips at its heart.
If the name Curtis rings a bell, it's because Curtis chips are also used in Oberheim synths, and Sequential instruments including the post-1980 Prophet 5s. The Curtis package used here is the CEM3396, essentially a synth-on-a-chip, as found in the Oberheim Matrix 6/6R and Matrix 1000. This replaces the independent Curtis VCO, VCF and EG chips, employed in more expensive polysynths, with a single chip, resulting in a much more cost-effective arrangement that still carries that trademark Curtis sound."
Novation Bass Station Rack
Psycho Friday X4 with GlitchBreak & Audulus Virtual Midi
Published on Dec 6, 2012 by Sinapsya
"This week, before the exit of AudioBus, I decide to play live only with my 2 iDevices.
On my iPhone 5 run GlitchBreak with new effect and my iPad 2 run Audulus with new Virtual Midi update controlled by Lemur with Abreakpoint Sequencer....good watching :-)"
iTunes:
GlitchBreaks - Alex Matheu
iOS Devices on eBay - Don't miss the Daily Tech Deals
Audulus - Wilson Holliday
Lemur - Liine
iOS Devices on eBay - Don't miss the Daily Tech Deals
RetroCade Synth LCD Demo
Published on Dec 6, 2012 by GadgetFactoryDotNet
"A quick look at the LCD in action with the 1.0 release of the RetroCade Synth software.
For more information visit:
http://retrocade.gadgetfactory.net"
"A quick look at the LCD in action with the 1.0 release of the RetroCade Synth software.
For more information visit:
http://retrocade.gadgetfactory.net"
MC-202 + x0xb0x + MFB-522
Published on Dec 6, 2012 by idesignsound
Drums come in at 3:20.
"I bought this MC-202 from eBay a couple of days ago, and I am hooked already. Should have bought one years ago! A lot of people seem to think it's difficult to use the sequencer but after a couple of hours it's become second nature. You just need to slow down a little and think about what your doing and do a some math to make sure your lengths tally up.
I didn't buy this to emulate a TB-303 but it can easily be done. As long as you don't use any parameters that the 303 didn't have. So don't use sustain, use a fast attack, and a little release. You can use Env Amount, Decay, Filter, and Res as long as you don't move the sliders to the extremes. You can tie notes and add portamento to produce a similar slide effect.
The video is a bit long (as is this description LOL) but if you get as far as the last few minutes you'll here my x0xb0x coming in. They work together really nicely :-) The drums are from an MFB-522 (listening back they are a bit quiet)."
Drums come in at 3:20.
"I bought this MC-202 from eBay a couple of days ago, and I am hooked already. Should have bought one years ago! A lot of people seem to think it's difficult to use the sequencer but after a couple of hours it's become second nature. You just need to slow down a little and think about what your doing and do a some math to make sure your lengths tally up.
I didn't buy this to emulate a TB-303 but it can easily be done. As long as you don't use any parameters that the 303 didn't have. So don't use sustain, use a fast attack, and a little release. You can use Env Amount, Decay, Filter, and Res as long as you don't move the sliders to the extremes. You can tie notes and add portamento to produce a similar slide effect.
The video is a bit long (as is this description LOL) but if you get as far as the last few minutes you'll here my x0xb0x coming in. They work together really nicely :-) The drums are from an MFB-522 (listening back they are a bit quiet)."
Elektron Analog Four acid/techno jam
Published on Dec 6, 2012 by Jimmy Myhrman
"Making some acid techno sounds with Elektron Analog Four + Machinedrum. The MD plays the drums, and is run through the A4 analog ladder filter, with some overdrive and tempo-synced LFO-modulations to make it more dirty. Some 303-like bass sounds are sequenced by the A4 on top of the drums."
Elektron on eBay
"Making some acid techno sounds with Elektron Analog Four + Machinedrum. The MD plays the drums, and is run through the A4 analog ladder filter, with some overdrive and tempo-synced LFO-modulations to make it more dirty. Some 303-like bass sounds are sequenced by the A4 on top of the drums."
Elektron on eBay
Monotron Filter controlled by Arduino
Published on Dec 6, 2012 by KrassesZeug
"The cut-off frequency of the Korg Monotron analog low-pass filter is controlled by an Arduino micro controller and a DAC chip.
-----------------------------------------------------------------
https://sites.google.com/site/synthaquarium/"
Mode Machines - F106 Juno Filter Video
Published on Dec 6, 2012 by acidjack303
"the brand new desktop filter box from mode machines. the F-106 Juno filter. 12db & 24 dB Low Pass Filter. Selfosc switch. VCA FREQ RESO CV inputs.
in this demo the sound source was a real juno 106 synthesizer. as mod. source was a make noise maths used."
Tubemaster: ZIMM03
Published on Dec 6, 2012 by Wein Glas
"Buchla Skylab and Zerosum Inertia ZIMMs: What a great combination!
This video features the never before seen ZIMM03 Tube Module from Zerosum Inertia!"
"The ModuleModule #3 built by Zerosum Inertia takes 2 audio signals and processes each through a separate grid on 1 single 5725 dual-control pentode.
Each input has a different sound due to the different grid for each input. When both inputs are used the two signals become one and create a unique overdriven combination different than that of a conventional mixer or signal combiner.
The result of using both grids results in multiplication.
For a dizzying effect, feed 2 detuned oscillators beating against eachother into the ZIMM03 and observe the summed effect.
A single VTL5C3 vactrol provides CV for the amount of processing.
The slew of the vactrol controlled gain creates a unique VCA type effect different than that of a traditional solid state VCA.
Experiment with sending pulses into the CV input and leave the AD generators free for other duties.
To the left is an independant 1 in 2 out multiple. Experiment with splitting 1 signal source, then processing the 2 outputs through inputs 1 and 2 of the ZIMM03. Or experiment with creating feedback. A mult is a mult.
The 1/4" jack on the top mirrors the Tini-Jax output. Try feeding the 1/4" output to an effects processor and the Tini-Jax to other modules.
Or use the the 1/4" output to feed your mixer without having to convert a Tini-Jax to 1/4"."
Doepfer A106-1 Xtreme Lowpass/Highpass Filter Modulation and Resonance Part One
Published on Dec 6, 2012 by raulsworldofsynths
"Audio Demonstration of Modulation and using the resonance insert of the Doepfer A106-1 Xtreme Lowpass/Highpass Filter.Sound and Video by Raul Pena."
All parts here.
"Audio Demonstration of Modulation and using the resonance insert of the Doepfer A106-1 Xtreme Lowpass/Highpass Filter.Sound and Video by Raul Pena."
All parts here.
Amnésie - Part 2 live @ Biblio.Graphik - 30.11.2012
Published on Dec 6, 2012 by egotwisterrecords
Octatrack & eurorack modular live.
"Amnésie - 'Le trou noir' - digital and vinyl LP.
Get the album : http://egotwisterrecords.bandcamp.com/album/le-trou-noir-vinyl-lp-out-now
Merci Gwenn, Florent et Wilfried!
https://www.facebook.com/amnesie.egotwister
http://www.egotwister.com"
Octatrack & eurorack modular live.
"Amnésie - 'Le trou noir' - digital and vinyl LP.
Get the album : http://egotwisterrecords.bandcamp.com/album/le-trou-noir-vinyl-lp-out-now
Merci Gwenn, Florent et Wilfried!
https://www.facebook.com/amnesie.egotwister
http://www.egotwister.com"
ArdCore Cartesian 4x4 Step Sequencer with Display
Published on Dec 5, 2012 by chisel316
"I went back and added better terminal support using PuTTY. The X,Y coordinate being edited is underlined and the X,Y step being played is bold and inverse. I also show how I use Ableton Live clips with the ES-3 to create a clock divider. Hope you enjoy it!
Peace \/
chisel316"
via Dan Marder on The MATRIXSYNTH Lounge
"I went back and added better terminal support using PuTTY. The X,Y coordinate being edited is underlined and the X,Y step being played is bold and inverse. I also show how I use Ableton Live clips with the ES-3 to create a clock divider. Hope you enjoy it!
Peace \/
chisel316"
via Dan Marder on The MATRIXSYNTH Lounge
Synthesizer von Gestern II
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"A brand-new sealed example of the most beautiful book ever produced about synthesisers.
Hardback, top quality paper and reproduction, full colour printing on most pages, great photos by Dieter Stork, and authoritative, well-researched text by Matthias Becker.
In German, but still a huge amount of info and synth porn for a non-German-speaker.
146 pp, A4 size (nearly 12 x 8.5"). 750g (1lb 10oz) - a really solidly-made and well-bound book.
First edition, published 1995. This is the second (and bigger) of two volumes of the book, and covers a huge range of classic synthesisers.
Instruments featured:-
Oskar Sala's Trautonium and Mixtur-Trautonium (cf the whole soundtrack of Hitchcock's Birds)
Joergensen Clavioline
ARP 2500
EMS Synthi 100
Moog Sonic Six
E-mu Modular
EMS Synthi Hi-Fli
ARP Pro-Soloist
Steiner-Parker Synthacon
RMI Harmonic Synthesizer
EMS Synthi E
Birotron
PPG 1002
Moog Taurus
Moog Liberation
Roland System 700
Synlab Modular (incredible!)
Yamaha SY-1
Oberheim OB-1
Roland SH-7
Steiner EVI
Crumar DS2
Yamaha CS-30
Korg Sigma
Korg VC-10
ARP Quadra
Roalnd RS-505
Roland VP-330+
Fairlight CMI
Realton Variophon
Oberheim OB-Xa
Oberheim OB-SX
Roland SPV-355
Moog Prodigy
Gleeman Pentaphonic
RSF Kobol
E-mu Emulator I
DK Synergy
RSF Blackbox
Roland SH-101
Roland TB-303
Roland TR-606
Roland MC-202
SCI Prophet 600
Roland Jupiter 6
Korg Poly 61
Yamaha DX7
Syntec Banana
SCI Prophet T8
Boehm Soundlab
OSC OSCar
Korg Poly 800
Oberheim Xpander"
via this auction
"A brand-new sealed example of the most beautiful book ever produced about synthesisers.
Hardback, top quality paper and reproduction, full colour printing on most pages, great photos by Dieter Stork, and authoritative, well-researched text by Matthias Becker.
In German, but still a huge amount of info and synth porn for a non-German-speaker.
146 pp, A4 size (nearly 12 x 8.5"). 750g (1lb 10oz) - a really solidly-made and well-bound book.
First edition, published 1995. This is the second (and bigger) of two volumes of the book, and covers a huge range of classic synthesisers.Instruments featured:-
Oskar Sala's Trautonium and Mixtur-Trautonium (cf the whole soundtrack of Hitchcock's Birds)
Joergensen Clavioline
ARP 2500
EMS Synthi 100
Moog Sonic Six
E-mu Modular
EMS Synthi Hi-Fli
ARP Pro-Soloist
Steiner-Parker Synthacon
RMI Harmonic Synthesizer
EMS Synthi EBirotron
PPG 1002
Moog Taurus
Moog Liberation
Roland System 700
Synlab Modular (incredible!)
Yamaha SY-1
Oberheim OB-1
Roland SH-7
Steiner EVI
Crumar DS2
Yamaha CS-30
Korg Sigma
Korg VC-10
ARP QuadraRoalnd RS-505
Roland VP-330+
Fairlight CMI
Realton Variophon
Oberheim OB-Xa
Oberheim OB-SX
Roland SPV-355
Moog Prodigy
Gleeman Pentaphonic
RSF Kobol
E-mu Emulator I
DK Synergy
RSF Blackbox
Roland SH-101
Roland TB-303
Roland TR-606
Roland MC-202
SCI Prophet 600
Roland Jupiter 6
Korg Poly 61
Yamaha DX7
Syntec Banana
SCI Prophet T8
Boehm Soundlab
OSC OSCar
Korg Poly 800
Oberheim Xpander"
Final Set of A-Z of Analogue Synthesisers
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
The listing is from the author Peter Forrest who states this is likely the last set. These are great books and imo the most comprehensive. Click on the pics to get an idea of what they are like. Peter also has other items listed including The Museum of Synthesizer Technology and Synthesizer von Gestern II.
via this auction
The listing is from the author Peter Forrest who states this is likely the last set. These are great books and imo the most comprehensive. Click on the pics to get an idea of what they are like. Peter also has other items listed including The Museum of Synthesizer Technology and Synthesizer von Gestern II.
Audiobus Coming to PPG WaveGenerator
via PPG Wavegenerator on Facebook
Note the Audiobus icon on the right. Audiobus allows realtime audio processing between apps, so you'll be able to process audio in from other apps and/or the audio out of WaveGenerator into other apps.
iTunes:
WaveGenerator - Wolfgang Palm
iOS Devices on eBay - Don't miss the Daily Tech Deals
Korg EX-800 Analog Synthesizer
Oberheim MATRIX-6 SN 705603
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
tokyowax (RSS)
via this auction
tokyowax (RSS)
KORG POLY-800 SN 005600
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
tokyowax (RSS)
via this auction
tokyowax (RSS)
Roland GR-100 Electronic Guitar Synth Effects Chorus Pedal
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Features and Specifications of the GR-100:
Complex hexaphonic distortion circuit
Additional sustain overdrive (mode 3)
6 individual -12 dB low-pass Voltage Controlled Filters, one per string
Frequency peak and sensitivity controls for VCFs
Built-in footswitch controls the VCF mode (on, bypass, or inverted)
Low Frequency Oscillator with rate control, for vibrato effects
Lush analog bucket-brigade chorus/vibrato
Pedal control input for the VCF
3 outputs: guitar, mix/e.q. and chorus
Synchronized, flashing LED status indicators
Dimensions: 11.75" (W) 9.8" (D) 3.75" (H)
via this auction
Features and Specifications of the GR-100:Complex hexaphonic distortion circuit
Additional sustain overdrive (mode 3)
6 individual -12 dB low-pass Voltage Controlled Filters, one per string
Frequency peak and sensitivity controls for VCFs
Built-in footswitch controls the VCF mode (on, bypass, or inverted)
Low Frequency Oscillator with rate control, for vibrato effects
Lush analog bucket-brigade chorus/vibrato
Pedal control input for the VCF
3 outputs: guitar, mix/e.q. and chorus
Synchronized, flashing LED status indicators
Dimensions: 11.75" (W) 9.8" (D) 3.75" (H)
DUB ECHO by S-CAT (Circuit Bent)
Published on Dec 6, 2012 by PHONICPOTION
"The video shows a Roland TR-606 running through the Analogue delay unit."
S-CAT on eBay (RSS)
"The video shows a Roland TR-606 running through the Analogue delay unit."
S-CAT on eBay (RSS)
Akai MAX49 Midi/Mackie CV/GATE Controller Review
Published on Dec 6, 2012 by sonicstate
"We take a look at Akai's new Controller keyboard with touch faders, Mackie Control/HUI and MIDI CV/GATE."
Akai MAX49's on eBay
"We take a look at Akai's new Controller keyboard with touch faders, Mackie Control/HUI and MIDI CV/GATE."
Akai MAX49's on eBay
Spark + Minibrute = Love
Published on Dec 6, 2012 by Arturiaweb
"In this video, Arturia Sound Design Manager, Mike Hosker, shows you how to sync Spark with MiniBrute to create locked arpeggiated and LFO patterns with your beats."
"In this video, Arturia Sound Design Manager, Mike Hosker, shows you how to sync Spark with MiniBrute to create locked arpeggiated and LFO patterns with your beats."
Resonance Circuits CIRCUIT BENT A.R.C MACHINE
RC CIRCUIT BENT A.R.C MACHINE ( ABSOLUTE RANDOM CHAOS ) DRONE SYNTH GENERATOR
Published on Dec 6, 2012 by djwidow420
"COMBINES AN EX BRITISH TELECOMS SIGNAL TESTER, LOW FREQUENCY OSCILLATOR AND PT2399 FX CIRCUIT.
THE PERFECT DRONE AND GLITCH COMPANION"
Resonance Circuits on eBay (RSS)
Update:
via this auction
"dual power on/off switches
pulse indicator led
pitch rate control
lfo rate control
output modulator control
copper and brass body contact plates manipulate the output via touch
output level control
1/4" jack output
powered by 2 x 9v batteries
circuit board and copper detailing with aluminium control knobs, housed in a gothic inspired box with leather strap and brass details"
Published on Dec 6, 2012 by djwidow420
"COMBINES AN EX BRITISH TELECOMS SIGNAL TESTER, LOW FREQUENCY OSCILLATOR AND PT2399 FX CIRCUIT.
THE PERFECT DRONE AND GLITCH COMPANION"
Resonance Circuits on eBay (RSS)
Update:
via this auction
"dual power on/off switchespulse indicator led
pitch rate control
lfo rate control
output modulator control
copper and brass body contact plates manipulate the output via touch
output level control
1/4" jack output
powered by 2 x 9v batteries
circuit board and copper detailing with aluminium control knobs, housed in a gothic inspired box with leather strap and brass details"
MiniMoog to Kenton ProSolo
Published on Dec 4, 2012 by KentonElectronics
"How to connect a MiniMoog to a MIDI to CV converter"
"How to connect a MiniMoog to a MIDI to CV converter"
Kenton MiniMoog Retrofit
Published on Dec 4, 2012 by KentonElectronics
"Demonstration of Minimoog fitted with Kenton MIDI retrofit"
via Ken MacBeth on Facebook
"Demonstration of Minimoog fitted with Kenton MIDI retrofit"
via Ken MacBeth on Facebook
1987 Casio CZ-1 Ad
via Retro Synth Ads where you'll find the write-up.
"Casio CZ-1 synthesizer "When you perform, it performs" full page colour advertisement from page 144 in the July 1987 issue of Keyboard."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
