Sunday, February 07, 2021
[LIVESTREAM] AKAI Force and Chill! - Dubby Techno (February 7th, 2021)
video by Electronisounds Audio
"Super casual stream and hangout! Making some Dubby Techno with the AKAI Force!"
Multivox MX-3000 Polyphonic Synthesizer SN 856031
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
You can find additional posts featuring the Multivox MX-3000 including demos here.
"This one is going to need to a lot of tlc but it’s super rare...
'The Multivox MX-3000 is actually a combination of 3 synths in one case:
-A monophonic Bass-synth. This synth is capable of 3 kinds of bass-sounds: soft, medium & sharp, and only playable on the lowest 2 octaves.
It has portamento with adjustable speed and you can choose out of 3 types of preprogrammed EGs:
-ADR
-ADSR
-Hold
Only the Release is adjustable.
-A polyphonic (String)Synth. This synth has a polyphony of 61 and contains 8 presets which you can alter with the onboard filters. Presets are: Soft Bass (with adjustable volume), Wood, Brass, Reed, String, Piano, Honky Tonk & Harpsichord. The last 3 presets are velocity sensitive which is adjustable. The polysynth contains an LFO for VCO as well for VCF.
The VCO contains a glide/bend function which can be switched off and LFO-modulation with delay is possible. The VCF contains CutOff, Resonance, EG-intensity and LFO Modulation. There are 2 preprogrammes EG-settings, ADR & ASR. You can also bypass these settings and use your own Attack and Decay/Release settings. Also present are a Ensemble-mode which thickens the sound and a Fullrotor which is actually a kind of Phaser. Speed and intensity are adjustable.
-A monophonic lead synth This synth is only playable on the upper 3 octaves. The VCO contains of sawtooth, square, pulse, triangle waves and noise. Portamento is possible and the waves can be transposed to 3 octaves (Low, Medium, High). LFO-modulation is also possible. The VCF contains an ADSR, CutOff, Resonance, EG-intensity (for the VCF-ADSR) and LFO Modulation. The VCA contains an ADSR, LFO-Modulation and a Selektor which can be switched from the normal ADSR to Repeat or Hold. The LFO is available in sawtooth, sinus and square.
Every section has it's own volume and output an can be switched on or off, so it's possible to use all 3 sections at once. All in all makes this synth a truly unique one, both in it's possibilities as in the sounds.
Comments About the Sounds:
Screaming monophonic leads are possible, but this synth produces also the coolest and heaviest bass-sounds and also has that famous JMJ-strings.Killer synth.'"
via this auction
You can find additional posts featuring the Multivox MX-3000 including demos here.
"This one is going to need to a lot of tlc but it’s super rare...
'The Multivox MX-3000 is actually a combination of 3 synths in one case:-A monophonic Bass-synth. This synth is capable of 3 kinds of bass-sounds: soft, medium & sharp, and only playable on the lowest 2 octaves.
It has portamento with adjustable speed and you can choose out of 3 types of preprogrammed EGs:-ADR
-ADSR
-Hold
Only the Release is adjustable.
-A polyphonic (String)Synth. This synth has a polyphony of 61 and contains 8 presets which you can alter with the onboard filters. Presets are: Soft Bass (with adjustable volume), Wood, Brass, Reed, String, Piano, Honky Tonk & Harpsichord. The last 3 presets are velocity sensitive which is adjustable. The polysynth contains an LFO for VCO as well for VCF.
The VCO contains a glide/bend function which can be switched off and LFO-modulation with delay is possible. The VCF contains CutOff, Resonance, EG-intensity and LFO Modulation. There are 2 preprogrammes EG-settings, ADR & ASR. You can also bypass these settings and use your own Attack and Decay/Release settings. Also present are a Ensemble-mode which thickens the sound and a Fullrotor which is actually a kind of Phaser. Speed and intensity are adjustable.
-A monophonic lead synth This synth is only playable on the upper 3 octaves. The VCO contains of sawtooth, square, pulse, triangle waves and noise. Portamento is possible and the waves can be transposed to 3 octaves (Low, Medium, High). LFO-modulation is also possible. The VCF contains an ADSR, CutOff, Resonance, EG-intensity (for the VCF-ADSR) and LFO Modulation. The VCA contains an ADSR, LFO-Modulation and a Selektor which can be switched from the normal ADSR to Repeat or Hold. The LFO is available in sawtooth, sinus and square.
Every section has it's own volume and output an can be switched on or off, so it's possible to use all 3 sections at once. All in all makes this synth a truly unique one, both in it's possibilities as in the sounds.
Comments About the Sounds:
Screaming monophonic leads are possible, but this synth produces also the coolest and heaviest bass-sounds and also has that famous JMJ-strings.Killer synth.'"
Yamaha DX7 Digital Programmable Algorithm Synthesizer SN 86559 w/ Extras
Killing Time | Moog Grandmother, Synthstrom Audible Deluge [& a Rubik's Cube]
video by Chris Hunt
"Sometimes you just gotta sit and wait"
Interesting technique.
Bodyguard
video by Beatprisoner
Kicks in at :46
"The main modules of this patch were:
* Grone - a Dark Drone Machine from Maneco Labs from Uruguay
* SWT 16+ from Robaux as the main sequencer
* Rample
* QD - Quad Drum from vpme
* Nostalgia from Dreadbox as Delay
* FX Aid from Happy Nerding as the main FX"
RCA Theremin and Speaker -1928 SN 100268
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"RCA Theremin and Speaker -1928
Theremin manufacture # 100268
Cabinet # 180
Contact me for a detailed history of this Theremin
Documented on the RCA Theremin Registry
The Theremin needs more work than I am willing to do at this time.
Many of these are in museums. The price reflects the rarity of this pair.
The Speaker is in very good condition for its age, short legs.
No Shipping - Pick Up Only - Located one mile from the old Moog Factory in Trumansburg, NY 14886 "
via this auction
"RCA Theremin and Speaker -1928
Theremin manufacture # 100268
Cabinet # 180
Contact me for a detailed history of this Theremin
Documented on the RCA Theremin Registry
The Theremin needs more work than I am willing to do at this time.
Many of these are in museums. The price reflects the rarity of this pair.
The Speaker is in very good condition for its age, short legs.
No Shipping - Pick Up Only - Located one mile from the old Moog Factory in Trumansburg, NY 14886 "
Weekend Jam with ParipiDestroyer, ROLI BLOCKS, KORG volca modular,beats, kick & Kaoss Pad KP3+
video by Shangri-la S
"Hi friends! I played a brand new micro synth "ParipiDestroyer" produced by DigiLogTokyo's sub-brand "Crazy Synth Kids". This cute and very tiny synthesizer provides intense bass sounds despite its cute looks. Paripi is the meaning of "Party People" This is so dope!"
Finger style with Just friends
video by junklight
"Been experimenting with finger style patterns on the modular using crow driving just friends for another project but somewhere along the line the script turned into this little piece
The patterns did sound more like finger style playing on a guitar earlier today but like everything I pushed and messed about with them to see where they would go"
Modal ARGON8X Wavetable Power Digital Synthesizer Rik Marston
video by Rik Marston Official
"Modal ARGON8X Wavetable Power
Synthesizer Demo by Rik Marston
***Watch in HD!!*** **Turn it UP!!!***
Wavetable power from a plucked sound to a digital pad!
The Modal Electronics ARGON8X is very cool sounding!
This synthesizer is a BLAST to use & record with, great value!
Special shout out to ROB for letting me demo his synthesizer!
Please see all of my 550+ synth videos right here on my channel!
Roland, Korg, ARP, Moog, Sequential, Yamaha, Nord etc. etc.
*Keep posted & check in for all of my new weekly uploads!*
Please Support Rik Marston Official!
My NEW Etsy store: **AhnyxianSoundDesign** UP NOW!
selling Synthesizer Sample Packs, Ambient CD's & Meteorites
https://www.etsy.com/shop/AhnyxianSou...
ALL synthesizer collection sample packs just $16.99!!!"
Yamaha CS15D Analogue Mono Synth SN 1060
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Closely related to the CS15, featuring the same twin oscillators, VCF chips and ADSR. Key difference is that the CS15D has the first voice assigned to preset sounds, and the second either presets or Manual. The manual setting of voice 2 combines with the presets on voice one can give some great effects. The case is also far more robust than the CS15, featuring wood end cheeks.
This one is in really nice condition. The end cheeks are pretty much perfect and there is very few imperfections in the front panel paintwork. There are some little lumps in the paint on the top surface (one picture tries to show these) but these really are minor and you only notice when looking up close.
It works fine in all modes and has only minor crackles when the Oscillator mixer slider, or volume control are operated while playing. All other controls are pretty much silent. I made some repairs to the power supply board and replaced a few of the signal line capacitors a few years ago and I have also swapped the Japanese transformer for a 230v one (professionally done, I'm an electronic engineer)."
via this auction
"Closely related to the CS15, featuring the same twin oscillators, VCF chips and ADSR. Key difference is that the CS15D has the first voice assigned to preset sounds, and the second either presets or Manual. The manual setting of voice 2 combines with the presets on voice one can give some great effects. The case is also far more robust than the CS15, featuring wood end cheeks.
This one is in really nice condition. The end cheeks are pretty much perfect and there is very few imperfections in the front panel paintwork. There are some little lumps in the paint on the top surface (one picture tries to show these) but these really are minor and you only notice when looking up close.
It works fine in all modes and has only minor crackles when the Oscillator mixer slider, or volume control are operated while playing. All other controls are pretty much silent. I made some repairs to the power supply board and replaced a few of the signal line capacitors a few years ago and I have also swapped the Japanese transformer for a 230v one (professionally done, I'm an electronic engineer)."
Korg VC10 Analogue Polyphonic 20 Band Vocoder Synth SN 160904
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Its in truly super condition with hardly any marks on the paintwork, no cracks in the end panels and no damage to the keys. It works nicely and features its original gooseneck, although the mic has been changed (was missing when I bought it)."
via this auction
"Its in truly super condition with hardly any marks on the paintwork, no cracks in the end panels and no damage to the keys. It works nicely and features its original gooseneck, although the mic has been changed (was missing when I bought it)."
Metasonix R-56 Reverb Eurorack Module
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Vacuum tube spring reverb, limited edition.
28HP
300 mA + 12V
300 mA -12V
38 mm deep
4.50 (4 Votes) Average Rating
via this auction
Vacuum tube spring reverb, limited edition.
28HP
300 mA + 12V
300 mA -12V
38 mm deep
4.50 (4 Votes) Average Rating
TECHNOSAURUS MICROCON II
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Swiss-made monophonic analog synthesizer / sound module with 1VCO + Sub VCO specifications controlled by Roland type CV / Gate. It can be used not only as a stand-alone analog synth but also as a filter for external signals. The sound is fat because it doesn't fit the compact size!"
via this auction
"Swiss-made monophonic analog synthesizer / sound module with 1VCO + Sub VCO specifications controlled by Roland type CV / Gate. It can be used not only as a stand-alone analog synth but also as a filter for external signals. The sound is fat because it doesn't fit the compact size!"
ROLAND SH-1000 Synthesizer SN 367121
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Roland's FIRST synthesizer was the SH-1000. Released in 1973, and well received all round the world, at the time. Compact, rugged, reliable, easy to understand and play, it brought the wonder of synthesized music to many young musicians.....Many ended up on top of home organs, so they seldom became gig-trashed.... 10 presets, a selction of synth sounds, but having live control of filter/resonance/modulation/sample & hold/pink or white noise, ADSR shaping and glide, lots of squidgy synth sounds can be manufactured to taste...... The synth has had a full service by our pro tech. Everything works 100%, and all keys work properly (with no double-triggering)."
via this auction
"Roland's FIRST synthesizer was the SH-1000. Released in 1973, and well received all round the world, at the time. Compact, rugged, reliable, easy to understand and play, it brought the wonder of synthesized music to many young musicians.....Many ended up on top of home organs, so they seldom became gig-trashed.... 10 presets, a selction of synth sounds, but having live control of filter/resonance/modulation/sample & hold/pink or white noise, ADSR shaping and glide, lots of squidgy synth sounds can be manufactured to taste...... The synth has had a full service by our pro tech. Everything works 100%, and all keys work properly (with no double-triggering)."
Spectralis Hybrid Analog Synthesizer Groovebox SN 140355 w/ Extras
Dubreq Stylophone Gen X-1
WERSI M.A.X 1 MAX-1 Sound Module
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
See this post for a demo.
via this auction
See this post for a demo.
Roland System 500
video by ms20user
"System 500 first run. OSC 1 is triggered by Moog and OSC 2 ist Sequenced by SQ1."
Batchas - Schwafel
video by batchas
"No additional effect. Direct out of Buchla mixer to stereo track."
DIY Analog-Synth - Nature (Live)
video by Andreas Remshagen
"An early Music-Style played live with my DIY Analog-Modular System.
the following DIY-Synths are used (I described them in my other Videos):
Strings/Choir-Synth 2.0 (Driven by Polyend Poly2 in First-Mode and Midi-Keyboard)
Strings-Synth 2.0
A Noise Toaster Synth (by Ray Wilson, MFOS)
The Analog Groovebox with built in mini-Sequencer
A Doepfer DIY-Synth
Bass-Synth with Moog-VCF
A YuSynth-Modular System (4-Wave VCO, moog-VCF-clone, ADSR and VCA
(Driven by Elektor-formant CV/Gate Keyboard)
The Mini-miditech keyboard is for the whole Pitch-it drives a Doepfer Dark
Link that is connected with all CV-ins through a CV-Distributor)
Effects are a Alesis Midiverb4 and a Yamaha FX500"
Like Wish You Were Here meets JMJ.
OSCAR SYNTHESIZER - FITTING THE TAUNTEK MIDI BOARD AND OPERATING SYSTEM
video by Mindburner
"The OSCar is a fabulous monosynth designed and built by Chris Huggett. My machine had been plagued with issues from day one. A major problem was the highly unreliable start up. The synth would not 'boot' and many power off/on cycles were needed to get it to work.
TAUNTEK have a new MIDI PCB and Operating System with may new features. I hoped this may fix my synth and make it useable aging. Here I detail my install of one of the first version of the Firmware.
The PCB needs to be built but many of the parts are readily found.
More details can be found at TAUNTEK
Special thanks to the folks on the OSCar freelists group.
Video for information only. A qualified synth tech is always recommended for synth repair."
Inside an OSCAR.
Farfisa TK80 demo track
video by ikworgek
"All sounds from the Farfisa, some delay added.
The farfisa TK80 is a cheap digital 80's keyboard, with midi.
very limited and noisy, but some nice sounds."
Third Wave
video by Martin Peters
"This track began as a melody I had in my head during walking the dog. I entered the melody in the Cirklon sequencer and added some accompanying sequences. Add here you see and hear the result.
The track starts with the bass on the Synthesizers.com Modular and the melody on the Tom Oberheim SEM. After that the rhythmic noises from the Plaits through Clouds are added. The sequences on the Korg ARP Odyssey and a voice on the Modular with the MOS-LAB Kobol VCO's are introduced. And in comes the Roland JD-800 with a strings-like pad. An improvised solo is played on the Minimoog.
In the second part double-time sequences of another Modular voice and the Mopho are added. Chords are played on the Polymoog and again an improvised solo on the Minimoog.
This track is recorded live to multi-track and mixed in Studio One afterwards. Only tracks from the live recording are used.
This track is also available on Bandcamp:"
E-MU Ultra Sampler - Demo #16
video by St0neOfficialChannel
"All presets I made on E-MU E4XT Ultra. E4XT sequenced from DAW (midi edition and midi automation). After the recording (track by track) was used lightweight compression/limiting on sum and nothing else. Please use 360p or higher for better sound quality."
VAI 49 Elgam Carousel - Farfisa Syntorchestra
video by Vintage Audio Institute Italia
"Great fun with the classic Italian Auto-comp machine and mono/poly keyboard.
With some external help from a Binson Echorec 2, a Schulte Compact Phasing A, the mysterious Emthree Pulsatron multi-effect and some delay."
VAI 8 - Siel Cruise - Roland Rhythm 77
video by Vintage Audio Institute Italia
"Siel Cruise is a quirky Mono synth / Divide Down String and brass synth combo from 1981. These can generate some neat sounds, especially with external help: here the mono bass gets some lush phasing from the Mu-tron Phasor II, with some added Space Echo repeats to double the speed.
The "piano" phrases are going through the Vermona DEG 500 Digital Delay, a cheap rack effect most likely produced a few years after the Siel, great modulation on these so we'll be using this one quite a bit from now on."
CLASSICAL HÄNDEL But On Analog Modular Synthesizer - Sarabande -
video by LOOK MUM NO COMPUTER
"Another #Classical Song done on my DIY #Analog #Synthesizer.
you can download the track here on Patreon amongst many others :-
https://www.patreon.com/posts/47233192
this was an excerpt i recorded multitrack (on the XLIVE Card) which was performed on the last patreon livestream last week. which is still available to watch like all livestreams i do"
Arturia Polybrute (50mn, some of my presets, no talk)
video by Michael Geyre
"I have been one of the lucky sound designers who worked on that fantastic instrument
here is a demo of some of the presets I made
as i am playing on an early prototype, both morphee and ribbon controller can be sometimes a bit buggy
thanks for listening
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
