10K Audio GYRO

video upload by DATABROTH

"Read my full review here: https://www.databroth.com/blog/gyro-r...

check out my wavetables and presets at https://gumroad.com/databroth
join my Patreon https://www.patreon.com/databroth"

Gyro - Official Walkthrough - 10K Audio

video upload by 10K Audio

"Gyro is a real-time loop instrument plugin (VST/AU) for creating personalized melodic loops as you play. Powered by a multi-layer hybrid engine, generative patterns & chords, and rich FX chains."

Gyro 1.1 Free Update - User Samples, MIDI Out & More - 10K Audio
video upload by 10K Audio

"Out now: Gyro 1.1 by 10K Audio
https://10k.audio/gyro

What’s new in Gyro 1.1:
• User Samples (Pro) — Load your own samples into one or more layers.
• MIDI Out — Route each sequencer lane to its own MIDI channel to drive other instruments.
• Pattern + Chord Locks — Lock your Pattern and/or Chord while browsing main presets.

This is a free update for all users.

00:00 Intro
00:14 User Samples
01:33 MIDI Out
02:53 Chord & Pattern Locks

Download the Gyro 1.1 MIDI Out DAW Setup Guide: https://download.10k.audio/gyro/docum..."

Vaemi Mini Mixer

video uploads by Vaemi

Playlist:
Mini Mixer (With Atari Punk Console, Cracklebox & PO-12) : Short Review : Vaemi (Synthesizer)
Mini Mixer (With Atari Punk Console, Cracklebox & PO-12) : Basic Features : Vaemi (Synthesizer)

via Vaemi Reverb

via Vaemi Reverb

Vaemi's new product, the Mini Mixer, is a mono analog mixer with 4 channels and 3.5mm mini jack inputs and outputs, designed for use in stage performances or recordings with all your line and analog equipment. Each channel features a saturation function, and it has a specially designed jack input for the 4th channel.

When the 4th channel and jack input are empty, the mixer’s master output is rerouted to the inputs, creating a "feedback" circuit. This feature allows the sound gain to increase by approximately 6 times, significantly raising the saturation level of the mixer. If an instrument is connected to the 4th channel, the feedback signal is disabled when the jack is plugged in, and the instrument's sound becomes part of the summing. When the channels are muted, the feedback enters self-oscillation.

CLICK FOR MORE »

Synthfest UK 23 New Videos

video uploads by sonicstate

Playlist:

1. Synthfest UK 23: MyVolts - Nifty USB Power Solutions

At Synthfest UK 2023, we caught up with Caroline from MyVolts, and they've added to their panoply of useful power solutions for musicians. MyVolts showcased their new product, the Alchemist power distribution hub, which harnesses the versatility of USB-C to deliver various voltages from 5V to 20V. This means you can power a range of equipment, from vintage synths to modern gear, with one device. They've also taken their USB power innovation to the next level with a step-up 12V power tip, allowing users to draw 18W from USB to power gear like the Electron Analog Four on the go. MyVolts aims to simplify power management for musicians, addressing issues like earthing and noise, and they're actively seeking input from the community to fine-tune their solutions.

In addition to the Alchemist power hub, MyVolts will be releasing their own power banks, USB-C power cables with wattage indicators, and a range of power tips compatible with various voltages. This expansion means users can power a wide range of devices efficiently and conveniently. These products are expected to be available around February or March. MyVolts encourages you to fill out their survey to help them better understand and solve the unique power challenges musicians face.

https://myvolts.co.uk/

2. Synthfest UK 23: Rides In The Storm - SED CSM Synth Voice

At Synthfest UK 2023, we caught up with Uwe from Rides In The Storm to get a glimpse of their upcoming modular synth voice module, the SED CSM. This module is a powerhouse of sound design possibilities, offering a wide range of features packed into a single unit. With two oscillator sections, three waveform options, pulse width modulation, and a wave folder, there's plenty of sonic flexibility on tap.

The SED CSM also includes a robust mixer section, a ring modulator, wave folder, noise source, and an external input, expanding its sound-shaping capabilities. Uwe demonstrated how the module can be used for lush soundscapes and dynamic modulation with its various features. SED CSM offers envelope generators with loopable modes and versatile LFOs and filter options.

SED CSM Price: around £390

3. Synthfest UK 23: Analogue Solutions - Ample Desktop Pin matrix

We returned to the Analogue Solutions booth to chat again with Tom who showed us the second synth he’s released this year, Ample. Ample is a 3 VCO synth which combines some of the greatest bits of other Analogue Solutions synths, including a patch pin matrix similar to the Vostok, a sequencer taken from the generator, an interval generator similar to that on the Fusebox, and a 24dB filter akin to that of the Pro One. It even has the same delay circuit from the new Maximus.

There are 3 types of pin for the pin matrix with resistances of 0 ohms on the black pin 10k ohms on the red one and blue giving a value of 100k, which allows for more flexibility in attenuating the signals you patch. Tom told us that Ample is particularly suited to percussion, with its snappy filter, and various clock sources available, and though Ample is in a desktop format, Tom has given us plenty of space between the controls so no accidental knob bumping can occur.

Available October 23

Ample Price: around £2000 plus vat

4. Synthfest UK 23: Expert Sleepers - Analogue Modules

At Synthfest UK 2023, we had the chance to chat with Os from Expert Sleepers, known for their versatile digital modules. However, Os has been exploring the analog side of modular synthesis and has introduced a range of eight analog modules.

Among the analog modules, Os showcased a squelchy filter, oscillators with unconventional sine wave cores, and an intriguing octave fuzz effect. He emphasized that these analog modules offer a different approach to sound generation and signal processing compared to their digital counterparts. Os also pointed out that once an analog module is designed and built, it's a finished product, offering a sense of completeness that's distinct from the continuous updates often associated with digital modules.

Expert Sleepers Analogue modules Prices: from £159

5. Synthfest UK 23: Yamaha - DM3 - Super Compact Digital Mixer

At Synthfest UK 2023, we caught up with Chris from Yamaha to take a look at their latest offering, the DM3 digital mixer. This compact 16-input mixer packs some impressive features into a small footprint, making it suitable for a variety of applications. With a focus on pro audio and audio versatility, the DM3 boasts brand-new microphone preamps inspired by Yamaha's high-end CL and QL series, ensuring top-notch audio quality. Operating at 96 kHz, the DM3 offers pristine audio resolution. We have to admit, we're all Gassing for this one...

The DM3 boasts a touchscreen interface, complemented by touch-and-turn knobs for tactile control. This innovative combination allows users to efficiently navigate and control the mixer's parameters. The DM3 can also serve as an audio interface, providing 18 in and 18 out over USB, making it an excellent choice for recording and streaming applications. With a compact and portable design, this mixer is versatile enough for live gigs, corporate events, podcasting, and studio work.

DM3 Standard Model Price: Around £1,500

DM3 Dante-Enabled Price: Around £2,000

6. Synthfest UK 23: Tone Science - Triple Cross - Chance Delay

At Synthfest UK 2023, we caught up with Ian Boddy from DIN Records, known for his prolific work in the electronic music scene. While DIN Records is celebrating its 25th anniversary next year, Ian has expanded his creative endeavors with the release of two modules under the sub-label Tone Science in collaboration with AJH Synth. The Triple Cross module offers versatile signal manipulation capabilities, enabling crossfading, morphing, panning, with non-synchronous LFOs and DC-coupled outputs. The Chance Delay module introduces a unique concept of probability-driven gate delay. Musicians can control the likelihood of triggers passing through, allowing for rhythmically intricate and ever-changing sequences. These modules are designed to enhance the performative aspect of modular synthesis, providing musicians with dynamic tools for evolving soundscapes and rhythmic complexity.

Triple Cross Price: £260

Chance Delay Price: £175

7. Synthfest UK 23: 1010 Music - Bluebox Eurorack Edition

At Synthfest UK 2023, we had the opportunity to chat with Steve from 1010 Music about their latest creation, the Bluebox Eurorack Edition. This module was born out of customer demand, as users of the original Blue Box desktop unit clamored for a Eurorack-compatible version. The Bluebox Eurorack Edition packs all the power and versatility of the desktop version but with a few key differences. It offers mono inputs and outputs that can be combined into stereo, six CV inputs for mapping to various parameters, and two dedicated USB-C ports—one for MIDI and the other for USB audio. This means you can connect your Blue Box to a Mac, PC, or iPad, send and receive audio tracks, and still record all 12 tracks, plus a master track and two effects sends, separately on a micro SD card. An upcoming firmware update will also bring stereo audio in both directions to the Blue Box Desktop Edition, offering even more flexibility in routing and recording. With its compact 30 HP size and thoughtful design, the Bluebox Eurorack Edition also offers a clock output bridging the gap between hardware and software seamlessly.

Bluebox Eurorack Edition Price: $699

8. Synthfest UK 23: Nonlinear Labs - C15 - Software Updates

At Synthfest UK 2023, we had a conversation with Tim from Nonlinear Labs, the creators of the highly expressive C15 synthesizer. Tim shared some exciting updates that have recently been implemented with the inclusion of LFOs via looping envelopes providing musicians with more sonic versatility. The C15's unique concept, based on a two-operator FM synthesis engine, remains intact, but these new LFO capabilities expand its sonic palette. Tim also showcased the expanded key tracking options, which can stretch pitches to create unique tonal textures. Furthermore, he highlighted the new twin-engine feature, which allows for cascading delays and creating captivating stereo soundscapes. Tim also hinted at future developments that owners of this expressive synthesizer can look forward to.

C15 Black Price: 4,300 Euros (incl. VAT)

C15 Cherry Wood Price: 4,750 Euros (incl. VAT)

9. Synthfest UK 23: Kenton - LNDX Midi Line Driver

At Synthfest UK 2023, we caught up with John from Kenton Electronics to check out their latest offering, the LNDX Line Driver, a handy solution for extending MIDI signals over long distances. Designed to address the challenges of maintaining stable MIDI connections in large venues and studios, the Line Driver utilizes Cat5 cables to transmit MIDI signals up to an impressive 500 meters. It's an ideal tool for live gigs in massive stadiums or situations where the control center is far from the performance area. The Line Driver features LEDs to monitor both the incoming and outgoing MIDI signals, providing essential feedback for troubleshooting and ensuring signal integrity. This straightforward and robust solution adds reliability to any MIDI setup, whether it's in the music industry, broadcasting, or even unconventional applications like flight simulators. With its opto-isolation and straightforward connectivity, the Line Driver is set to become an essential tool for professionals seeking rock-solid MIDI signal transmission over long distances.

LNDR pair Price: £127.92

10. Synthfest UK 23: Sweet Discrete - Synth Panel Restoration

At Synthfest UK 2023, we had a chat with Craig from Sweet Discrete, a company specializing in unique synth restoration and custom creations. Craig showcased their latest endeavor, which goes beyond their well-known synth overlays. Sweet Discrete has taken on the ambitious task of restoring classic synths like the Jupiter 8 to their former glory. These aren't just simple restorations; they're meticulous, artisanal processes, involving lead loading to remove rust and imperfections, followed by precise silkscreening. What's more, Sweet Discrete manufactures exact replica shells for various synth models, offering three versions for the Jupiter 8 alone. They've even delved into MIDI mods for the Jupiter 8, bringing modern convenience to these vintage gems.

Beyond their cosmetic work, Sweet Discrete is exploring the possibility of delving into electronics and design for synthesizers. With a keen focus on quality and precision, they're making a name for themselves in the world of synth restoration and custom solutions. To learn more about their offerings and explore the range of products, visit their website

See the SYNTHFEST UK label for more coverage of this year's event.

Electrotechnique TSynth v4 Synthesizer Kit

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

You can find demos of the TSynth v4 in previous posts here.

"A complete bill of materials (DIY Kit) to create your own TSynth, based on the latest Teensy v4.1 Microcontroller. All the parts you need will be provided, but some basic knowledge of soldering and using the Arduino IDE are required to complete the build.

CLICK FOR MORE »

Rarebeasts EmTronic Mini Synth

Published on May 16, 2020 Rarebeasts

"This is the EmTronic mini synth, it's a super simple Arduino powered noise maker that I have designed to be easy to build and only requires easy to buy parts. This little synth allows you to control frequency, modulation and the waveform of the sound.

The Arduino sketch uses the awesome the_synth library from DZLOnline.

The 3d printed front panel finishes off the mini synth but you don't need it to make the sounds. You could even build it on a breadboard if that works for you.

Best of all once you're done it's time to experiment with your own mods to the software to make new crazy sounds and mods to the front panel to really get the look you want.

At some point I will sell few finished EmTronics for those who don't want to make their own so check out my store some time at Rarebeasts.

You can find the EmTronic2020 in my Etsy store here: https://etsy.me/3cHPfg6 or build your own with my Instructable here: https://www.instructables.com/id/EM-T...

Happy noise making

Brian McNamara

Supplies:

Arduino Nano
10k pcb mount vertical pot(RV09)
Tactile push button switch
1/8" audio socket(PJ392)
2.2uF radial capacitor
About 40cn of Wire
3d printed front panel and support arm, you don't need this for it to work but it's fun
Mini-B USB cable"

CLICK FOR MORE »

HKA Design Digitizer Bitcrusher Pedal

Published on Jul 21, 2019 Harry Axten

"This is a digital sampling bitcrusher pedal I've been working on recently. It samples at 8/6/4 bit resolution and is based around an ATmega328P microcontroller.

The project is open hardware - all of the design files, code and construction details can be found on my website: https://hkadesign.org.uk/digitizer.html"

Demo with the Sequential Prophet-6.

CLICK FOR MORE »

DIY Modular - Eurorack w/ Izhar Ashdot Sound & Vision

Published on Jun 22, 2019

Turn on CC for English subtitles.

Playlist:

1. White Noise! Drums & Percussion from a cheap Ebay module.

"White Noise is a basic ingredient in the creation of electronic musical instruments, especially drums and percussion.

In my Ebay hikes, I found this small and dirt cheap (1.30$) kit that makes healthy white noise and I headed on to make some sounds with it.

Connect the Vactrol in place of resistors R4 or R5, for different effects.
For Modular output level, replace resistor R3 with a value of 8-10K ohms.

רעש לבן הוא מרכיב בסיסי בהרבה מהסאונד של כלי נגינה אלקטרונים, בעיקר בתופים והקשה.
במסגרת שיטוטיי באיביי, מצאתי קיט קטנטן וזול בטירוף שמייצר רעש לבן.

הקיט באיביי: https://ebay.to/2MVUQa4
להגביר את עוצמת הרעש לשימוש במערכת מודולרית: החליפו את נגד R3 בנגד עם ערך של 8-10K.
את הואקטרול חברו במקום אחד הנגדים R4 או R5. הסאונד שונה בכל אחד מהם.
המוזיקה בסרטון: https://soundcloud.com/izh-ash/can-th..."

2. 2399: Building a DIY Delay Module

This video shows the process of making a Eurorack Delay module using a PT2399 chip.
Using a self built musical instrument is so much fun!

Strip board Layout for my module

3. A DIY Clock Divider Groove

You can program drums without a sequencer!
A clock divider is a module which creates various divisions of an input clock, the rhythmic base of the system.
I built a module using two cute chips:
The CD4040 divides the clock in multiple of 2: 2, 4 ,8 ,16 ,32 ,64 , 128 etc.
The CD4022 is a simple counter. By deciding how far it counts, we can create more interesting divisions, like 3, 5, 6, 7 etc.
Each division triggers a different drum module, which creates a lovely automatic rhythm.

אפשר לתכנת תופים ללא סיקוונסר!
מחלק שעון (עברית שפה קשה), או Clock Divider הוא סוג של מודוּל שיוצר חלוקות שונות של קלוק, שהוא הבסיס הריתמי של המערכת.
בניתי קלוק דיוויידר (עדיין ללא פאנל) שמורכב משני שבבים חמודים. ה-CD4040 מחלק ל-2,4,8,16,64,256, וכן הלאה ואילו ה-CD4022 פשוט סופר קדימה. ניתן להחליט עד כמה הוא סופר ואז לגרום לו לחזור לתחילת הספירה. כך אנחנו מחלקים את הקלוק למספרים מעניינים יותר...
כל אחת מהחלוקות נשלחת למודול אחר של תוף אלקטרוני וכך נוצר לו מקצב אוטומטי אך מגניב!

4. Chasing Diodes - The perfect Distortion Diode Circuit showdown

A comparison of 10 different clipping circuits on a cheap solid state amp with a Marshall 1912 1x12 Cabinet.
1N4001 & 2x 1N4001 (Asymmetric)
1N4004 & 2x 1N4004 (Asymmetric)
2x Orange LEDs
Bypass
2x 1N4148
2x Blue LEDs
MPF102 JFET & 2N5457 JFET (Asymmetric)
2x КП303И Russian JFETs
2x BAT-85 Schottkey diodes
КП303И Russian JFET & Orange LED (Asymmetric)
1N4148 diode & J201 JFET (Asymmetric)

5. Adding a Bluetooth input to the Studio Console

This happens all the time!
I meet a musician in my studio and he wants to play me a demo from his phone.
I start looking for a cable to connect to the patchbay, only to realize that it's a new iPhone with no analog audio connector.
A friend who builds studio monitor panels told me he started incorporating a Bluetooth input so I decided to add one to my Control 24 console.
I strolled down to Ebay and found a BT 4.0 module, built a steady power supply and connected it to the patchbay instead of the defunct CD player.
It's compressed audio, but hey, it gets the idea across!
זה קורה כל הזמן.
מוזיקאי שאני פוגש באולפן שלי רוצה להשמיע לי סקיצה מהטלפון שלו ואני מתחיל לחפש כבל כדי לחבר את הנייד שלו למערכת שלי. אם מדובר באייפון 7 ומעלה, אז בכלל אין על מה לדבר כי אין לו בכלל חיבור לכבל אודיו!
איציק אליהו הגאון סיפר שבקופסאות המוניטור החדשות שלו הוא משלב חיבור בלוטוס, איזה רעיון מבריק!
החלטתי שאני מוסיף בלוטוס לקונסולה שלי.
כהרגלי, פסעתי לאיביי ומצאתי שם מודול בלוטוס 4.0 ב-7.5 ש״ח. בניתי מעגל קטן סביבו עם אספקה יציבה של 5V וחיברתי אותו לקונסולה במקום הקומפקט דיסק שכבר מזמן שבק חיים.
זו אמנם דאטה מקומפרסת אבל זה עובד!

6. The Pseudo Random Sequencer
7. The Midi to Gate from Down Under

EMS Synthi E - The Educational Modular Synthesiser (1975) Serial # 194 7137

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"Such a great little compact modular synthesiser that can really surprise with its heavy bass growl. Ive destroyed sound systems at venues performing with this thing.

“Versatile and Robust” as the manual states… You have to hand it to the people at EMS they really knew how to design synths. This one has all the features you need to perform with just this alone and bring the house down, its sliding controls are smooth and intuitive, its internal touch ribbon controller is super fun and you can plug external gear (guitar, voice, drums into the Envelope Follower) to control any or many parameters. The Synthi E was designed for schools and colleges back when education held humanities in high regard, imagine being exposed to modular synthesis as a high school student?!?

A tight little package wrapped in an original Spartanite case which alone is extremely sort after and valuable.

Did I mention that it is battery operated as well? Yes, so you can take it into woods and jam out to nature sounds, set up a mic and your Synthi will play along with the birds. For studio sessions it can be connected to a 12volt DC power source so you can play all night long.

It also comes with and extremely rare 3-octave external keyboard with silky smooth action if you wanted to play it in a more conventional manner. Ive never seen one of these for sale, ever so I doubt there are many out there. Serial # 7137

CLICK FOR MORE »

WORNG LRMSMSLR Mid-Side Encoder-Decoder Thonk DIY KIT Build+Patch Test - Eurorack Synth DIY

Published on Jul 7, 2018 SonicVoltage

https://www.thonk.co.uk

"WORNG Electronics LRMSMSLR Mid-Side Encoder-Decoder Eurorack Module 'Thonk' DIY KIT Build Steps and Test Patch Video (2018)

Mid/side processing is extremely useful and common practice in mixing and mastering. It allows you to process the Mid Content and Side content of your stereo signal independently. For example, in the patch I used to test my WORNG LRMSMSLR DIY KIT purchased from thonk.co.uk I use the LRMSMSLR Eurorack Module to add AJH GEMINI 2412 Filtering to the Mid content of my stereo signal and only to the Mid Content. At the same time I am adding Fuzz Distortion only to the Side content of the stereo signal by sending the SIDE signal through the Retro Mechanical Labs Electron Fuzz Custom EFCCV Eurorack Module

But that’s just the start, there is a lot you can do with the ability to press Mid and Side content of a stereo signal, the WORNG LRMSMSLR is an extremely useful tool opening up a lot of creative doors.

WORNG Electronics LRMSMSLR DIY KIT BUILD INDEX:

CLICK FOR MORE »

Persision Rectifier VCF Eurorack using a Proto 1 Breadboard Module

Published on Feb 7, 2017 Reckless Experimentation Audio LLC

"Voltage Controlled Filter based around a precision rectifier,
using a Reckless Experimentation Audio
Proto 1 Eurorack Breadboard Module

schematic
https://www.pdf-archive.com/2017/02/0...

Part Value

C1 1uf
C3 10uf
C4 10uf
D1 1N4148
D2 1N4148
IC1 LM833
IC2 LM833
J1 Mounted to Breadboard Module
J2 Mounted to Breadboard Module
J3 Mounted to Breadboard Module
R1 10K
R2 10K
R3 10K
R4 20K
R5 20K
R8 100K Mounted to Breadboard Module
R9 100K"

Eurorack Votlage Clamped CV Mixer using a Proto 1 beadbaord module

Published on Feb 4, 2017 Reckless Experimentation Audio LLC

"Voltage Clamped CV mixer
Using a Reckless Experimentation Audio
Proto 1 Eurorack breadboard module

http://recklessexperimentationaudio.com

This is useful for taking you CV generator of choice,
mixing it with a module with a large output voltage range ,
and connecting that to a module with a limited input voltage range.

Schematic here
https://www.pdf-archive.com/2017/02/0...

CLICK FOR MORE »

A quick and dirty Voltage Controlled Oscillator on a Proto 1 Module

Published on Jan 29, 2017 Reckless Experimentation Audio LLC

"A quick and dirty Voltage Controlled Oscillator using a Proto 1 Eurorack Module by Reckless Experimentation Audio LLC

Module can be purchased here
http://recklessexperimentationaudio.com

Schematic here
https://www.pdf-archive.com/2017/01/2...

Parts list

CLICK FOR MORE »

bitrman cv mod demo

Published on Jan 18, 2017 Brian Comnes

"Add CV to Alesis ModFX Bitrman. BEcause internal voltages are 0-3VDC, I had to add a simple voltage divider to reduce the sent voltage not to exceed 3 volts. Very simple with a 10K resistor on the + pole jooined by a 15K resistor from the negative pole. Then detach the center pins of the two pots for Bitr and Phasor and rout in the external voltage. Quite simple actually. Enjoy!! Sorry for low volume audio."

Teenage Engineering "Pocket Mixer"... Say What?!

Published on Feb 7, 2016 djthomaswhite

"The demo explains everything really, but to make it quick I made a mixer and sync distribution device to use all 6 currently available Pocket Operators at the same time with an audio mixer and 1/4" out jack. Fun! If you like what you see let me know in the comments. With enough demand I may make these with powder coated case, silk screen and color coded knobs.

For the curious - Technically this is a passive summing mixer with 100K Pots and 10K summing resistors. The sync is simply split from the input jack to the output jacks with one single copper wire. Easy peasy. I will use Log (audio taper) pots in the final design. Pan and stereo outs would be hard without adding active circuitry.

Don't be afraid to get your hands dirty. You can do it! Thanks for stopping by to check out another one of my projects captured on video."

tiergrinder SH20 - MS20 Style DIY SYNTH

Playlist:

1. SH20 sampleholddemo - Published on Sep 28, 2012
"Simple demo of my DIY ANALOG Synths sample and hold circuit.

LFO1 triggers envelope generator and S&H's clock. Basicly synth is playing itself, S&H takes random voltage from the white noise generator everytime LFO triggers its clock input. Sorry for the poor video/audio quality."

2. DIY SYNTH BASSLINE DEMO - Published on Oct 2, 2012
"DIY SYNTH DEMO

Dirty bassline made with two VCO's both using square wave.
Just wanted to show how this synth sounds with detuning and some PWM tweaking.
I use VCO1's scale switch on couple times to change the octave scale, most of the time VCO1 plays one octave lower than VCO2, as a "sub" oscillator.

Signal path :

VCO1 and VCO2 goes to VCO mixer, there to Moog filter, and there to VCA. Envelope generator 1 controls VCA with sequence triggers from SH101.

This time I managed to get video quality better but sound is still pretty raw :/"

3. DIY SYNTH - ARPEGGIATOR - Published on Oct 2, 2012
"DIY SYNTH SIMPLE ARPGGIATOR DEMO

Simple arpeggiator demo to show how saw waves sound on this diy synth.
I have wrong pot on MS20 filters cutoff.. should be 10K and I have 100K so tweaking is bit tricky :D

VCO1 Saw wave routed to MS20 filter and there to Moog filter
VCO2 Saw wave routed to Moog filter"

Ieaskul F. Mobenthey Eurorack Modules From Ciat-Lonbarde's Peter Blasser

via Control

"Peter Blasser's - Ieaskul F. Mobenthey modules are now In-Stock. Couldn't be happier to have Peter's stuff in-stock, he's been pushing the limits of instrument design and the philosophy behind it for years with Ciat-Lonbarde and very much encompasses the ideals of what we find inspiring about synthesis, electronics and the makers who make them. Limited Qty available."

Details on each, captured for the MATRIXSYNTH archives, follow. You'll find a video of them previously posted here.

"Ieaskul F. Mobenthey - Denum

The Denum module is essentially a bounds/bounce oscillator. It has the “triangle core” circuitry used in many
oscillators, but it adds a correlated bounds modulation, according to the concept (see below). Here, bounds and
bounce are each given equal treatment, with separate linear and exponential controls and inputs. In addition,
this module has a fully featured bi-polar VCA with complimentary inputs, to get you quickly going sending
“bb-objets” out the left and right channels.

Denum is an 8HP Eurorack module that runs on +12 and -12 volts. Attach power connector positive to “+” and
negative to “-”. Failure to follow proper power polarity will result in instant destruction of unit.

Looking at the front panel of Denum, note that inputs are marked by copper fill. There are three main sections:
bounce, bounds, and the VCA. Bounce is above bounds to emphasize the numerator/denominator relationship
of the two. Each of the two has exactly the same inputs and knobs. The “basis” knob sets the base rate or
position for bounds. There is a linear control input, marked by a a caret. Linear modulation is an alternative
input for pre-enveloped audio, since it has no attenuverter. However, the exponential control input is tied to an
attenuverter, marked by a characteristic bow-tie. An attenuverter works like this: at noon the modulations are
nulled out, they have no effect; clockwise from there they increase in intensity, with positive input meaning
“more”; to the counter-clockwise direction, modulations increase as well, but with negative input meaning
“more”. This knob is essential to controlling how much, and in which direction, your modulations apply.
Between the bounds and bounce areas, there is a range switch. When in middle position, Denum runs at a
standard audio rate. Pointing downward is a low audio rate, and pointing upwards is a definite CV, lowest rate.

The triangle output speaks the position of the waveform in voltage, and square expresses the frequency in terms of
negative and positive 10 volts. The triangle output is bussed into the left and right audio inputs of the VCA,
at bottom. Either can be swapped out for external audio energies, via the “left, right signal inserts”. The “left,
right VCA inputs” are for controlling the amplitude of the signals, with either a linear or exponential mapping. If the
left input is greater than right, sound goes out the “left out”. If right is greater than left, sound goes out the
“right out”. The voltage amount of difference maps to loudness in these channels. The “linear, expo switch”
chooses linear when cocked up, as marked by a caret, and exponential when cocked down, as marked by a
rounded form. There is an optional mute when the switch is in the middle.

About Bounds/Bounce

CLICK FOR MORE »

Moog Werkstatt-01 World Wide Release and Online Modification & Creative Learning Portal

Werkstatt-Ø1 | P-Thugg Published on Oct 7, 2014

"In this video, Chromeo's Patrick "P-Thugg" Gemayel builds an improvisatory track using only the Moog Werkstatt-Ø1 and a simple drum pattern. The Werkstatt-Ø1 is a patchable, 100% analog synthesizer capable of producing a wide variety of classic Moog sonics. For this track P-Thugg summons vintage Moog basslines, expressive leads and evocative sound effects from the Werkstatt-Ø1, demonstrating the range and flexibility of its painstakingly designed circuits."

"Moog Announces World Wide Release of Werkstatt-01 Analog Synth & Online Modification and Creative Learning Portal

ASHEVILLE, NC – October 7, 2014 – Today Moog announced the official worldwide release of the Werkstatt-01 Analog Synthesizer Moogfest 2014 Kit — a patchable analog synthesizer designed to inspire the exploration and modification of classic Moog circuits while delivering a myriad of vintage and new raw, mangled, and monstrous Moog tones. This highly-portable instrument is secured in a solid-steel chassis and features a harmonically rich Moog VCO, classic 4-pole Moog Ladder filter, wide-range LFO with audio-rate modulation capabilities, ADS envelope generator, and an analog patchable header for expansive sonic experimentation, manipulation, and decimation. To demonstrate the range and flexibility of Werkstatt's classic Moog sonics, Moog has released a video featuring Patrick "P-Thugg" Gemayel, keyboard player for Atlantic Records’ band Chromeo, building an improvisatory electro funk track using only the Moog Werkstatt-Ø1 and a simple drum pattern (see video link).

Today also marks the launch of WerkstattWorkshop.com (beta) — an interactive creative learning portal containing project ideas, mod tutorials [videos below], parts lists, educational lesson plans, 3D printer files, Arduino integration and control and many other dynamic resources for Werkstatt owners. This microsite also includes Moog’s new and on-going research surrounding the use of subtractive synthesizers in STEM and STEAM high-school classrooms. Lessons in these studies are focused on project based learning opportunities, and encouraging a creative deployment of practical skills in STEM fields. All lessons and associated materials are open source and available online free to educators across multiple disciplines.

“Analog synthesizers have long had their own maker culture born of curious engineers, musicians, and hobbyists alike,” said Moog Music CEO, Mike Adams. “Bob Moog got his start at the age of 15 by studying and modifying Leon Theremin’s designs. We’d like to share our legacy of learning, music, and electronics to empower a new generation of makers to expand on our work and take it to levels we can’t yet imagine." Adams said.

In April 2014, the Werkstatt-01 Analog Synthesizer Kit was made available to Engineering VIP ticket holders at Moogfest 2014, Moog's multi-day celebration of technology, art and music. The success of the workshop at the festival prompted Moog to release a limited number of Werkstatt's to select US dealers. Starting today the Werkstatt-01 Analog Synthesizer Kit is available and in stock at all Moog Music dealers worldwide. MSRP of $329US"

Workshop tutorial videos followed by more pics below.

Moog Werkstatts on eBay


Published on Oct 7, 2014 Moog Music Inc

Playlist:
WERKSTATT | Photo Sensitive Resistor
"This simple modification adds a photocell resistor to control our VCF. By using a photocell we are able to have functional control over the filter cutoff frequency by simply moving our hand closer or farther away."

WERKSTATT | Pressure Sensitive Resistor
"In this simple mod we will be exploring using various unique resistors to interact with our Werkstatt. We will be using a force sensitive 10k resistor to interact with our VCA."

WERKSTATT | Volume Knob
"We can use the power supply taps provided on the Werkstatt to add a Volume control functionality to our Werkstatt. Having a volume knob may allow players to better integrate the Werkstatt into their setup."

WERKSTATT | Fine Tune
"The Werkstatt comes with a coarse tune potentiometer in the form of the VCO FREQ knob. However, it is sometimes necessary to have a finer control over the VCO tuning. This modification adds a fine tune potentiometer to your Werkstatt."

WERKSTATT | Pitch Bend
"Many popular synthesizers have a pitchbend wheel included for dynamic musical expressions. We will use a 10kΩ SoftPot to emulate the pitchbend wheel and add a fun functionality to our Werkstatt."

WERKSTATT | 2nd Oscillator
"The Werkstatt features a single-oscillator VCO, but by patching and attenuating our keyboard control voltage to our LFO we are able to use the LFO as a second oscillator. This feature is best used to add a lower frequency Triangle or Square wave oscillator to our Werkstatt."

WERKSTATT | Arduino Noise Generator
"A popular synthesizer feature is the noise generator. This noise can be filtered and mixed with our tonal signal to add bite or create percussive sounds. In this mod we will be using an Arduino microcontroller to add a noise generator to our Werkstatt."

WERKSTATT | Arduino Arpeggiator
"An arpeggiator is an electronic instrument feature which takes played chords and cycles through the notes in sequence at a set rate. This modification will add a arpeggiator/sequencer function to your Werkstatt by adding an Arduino micro controller and manipulating minimal code."

WERKSTATT | LFO Quantizer
"Do you want to wobble? Are you all about that bass? Do you want to add face melting to your resume? This mod is for you. Using the Arduino and some code we can create an LFO rate quantizer to sync our keyboard notes to LFO rate settings at a specific tempo."

CLICK FOR MORE »

Analogue Solutions Vostok

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"Full Spec:
All circuits are totally analogue with the exception of the MIDI interface. This is the Version 2 Vostok with 3 analog oscillators and new metal case!

484 Matrix patch panel points / 69 Sockets / 52 Rotary controls / 13 LEDs / 20 Switches / 2 Displays

Dimensions
Dimensions shown do not include feet/handles/catches/corners pieces.
Complete closed case: 274 (H) x 440 (W) x 188 (D)
Weight: 19 pounds with lid on.
Lid depth: internal 50mm (enough to leave in patch leads). External 134mm

Control Modules
MIDI to CV Converter
CV1 (pitch) / CV2 (controller) / Gate / Accent / Legato, MIDI Thru, channel select, manual trigger

Joystick
2 way joystick controller

Sequencer
8 step CV & Gate analogue sequencer, range switch, manual step

Audio Modules
VCO1: Saw / Square / Tri waves, Glide, Sync
VCO2: Saw / Square waves, Pulse Width, Glide, Sync, Sub outs
VCO3: Saw / Square waves, Pulse Width, Glide, Sync, Sub outs
Noise: White noise source

Voltage Controlled Multimode Filter
2 Filters based on Korg MS20 circuitry. Independent Cut Off and Resonance for Low Pass Filters and High Pass Filters. The VCLPF and VCHPF combine to produce a 3rd filter type, Band Pass

CLICK FOR MORE »

ANALOG SYNTH MODULAR 7HP NJM13700 DUO VCA, NINJA MAN

Note: links to listings are affiliate links for which the site may be compensated. via this auction

"NEW MODULE ALERT!!! HERE IS AN UPDATE TO ONE OF MY OLDER CLASSIC VCA DESIGNS. I MANAGED TO SQUEEZE TWO OF THEM ON A 7HP PANEL, THE CIRCUIT DID NOT CHANGE I JUST SHRUNK IT. I AM OFFERING A SWEET PRICE SINCE IT DOES NOT TAKE ME MUCH EFFORT TO BUILD THESE. I THOUGHT OF EVERYTHING WHEN I LAID OUT THE CIRCUIT (AS FAR AS ASSEMBLY). THIS IS SMT BASED. IT USES NJM1700 WHICH IS THE LM13700 SIOC EQUIVALENT. THIS VCA DOES A NICE CREAMY CLASSIC SOUND. IF YOU LIKE OLDSCHOOL APHEX TWIN, THEN THESE ARE BASICALLY HIS BREAD AND BUTTER AUDIO PATH IC'S.

I AM OFFERING A VERY COMPETITIVE PRICE FOR DUAL VCA'S. FREE SHIPPING.

THIS INCLUDES THE RIBBON CABLE AND PANEL SCREWS.

SPECS:

EURO 7HP WIDE, DOEPFER CASE FORMAT POWER SCHEME

DEPTH: 1.25"

NINJA MAN (NJM) 13700 DUO VCA

CONTROLS: (1) VCA OFFSET KNOB, (1) VOLUME OUT KNOB)
LINEAR/EXPO SELECT SWITCH

JACKS: (2) CV INPUT JACKS, (1) AUDIO INPUT, (1) OUTPUT

TRIMMERS: (1) 10K AUDIO INPUT ADJUST, (1) 100K ZERO CV LEVEL ADJUST"

Innerclock Goes Modular

via Innerclock

"Inputs
Clock Input – TRS 1/4″ [Sync-Gen II DAW Audio]
Transport Input – TRS 1/4″ [Sync-Gen II DAW Audio]
Gate Input – [+5VDC - Normalled High]

Outputs
Reset Output – [20ms/+5VDC]
Simultaneous Trigger Output Divisions – 1/2/2T/4/4T/8/8T/16 [20ms/+5VDC]
Midi Clock Output – 24 PPQ with Programmable Re-Start, Division Rate and Swing via Sync-Gen II software
Din Sync Output - 24 PPQ with Programmable Re-Start, Division Rate and Swing via Sync-Gen II software

Features
Sample Accurate Rhythmic Synchronization between any DAW and any Modular Synthesizer system
Zero Latency with Precision Sync-Offset adjust via Sync-Gen II
Works with any multi-channel DAW audio interface – no DC Offset hardware or cable modification required
Includes Sync-Gen II software – AU/VST/RTAS
Simultaneous Phase-Locked Outputs – Midi Clock/Din Sync and All Trigger Out Divisions
20 microsecond Pulse Edge Detection/Sync Conversion Timing Core
External Analogue Gate Input allows ‘playable’ output pulses while maintaining precise DAW Tempo-Grid synchronisation

Electrical Specifications
Clock Input Impedance – 10k
Clock Input Threshold Range – 350mV to 1.40V [500mV Optimum]
Transport Input Impedance – 10k
Transport Input Threshold Range – 350mV to 1.40V [500mV Optimum]
Trigger Outputs – +5VDC/20ms Pulse Width * Power – +/-12V or +/-15V or +/-9V [Eurorack and Frac sockets fitted]

Mechanical Specifications

Format – Eurorack

Note: Picture shown is Rev1 Prototype - Production scheduled for December 2011"