Acire 🥉(Erica Synths LXR02 & DB01 // Conductive Labs NDLR turning the LXR02 into a polyphonic synth)

video upload by 2-Minute Warning

"If you've already watched a some of my videos, you might know that I sometimes like to divert a few electronic instruments from their use 😅
So here the challenge was to make the LXR-02 (which is supposed to be mainly a digital drum synth) act as a drum machine & a polyphonic pads synth 😄

For this, I used the Conductive Labs NDLR sequencer with its polychain feature (on its PAD track) which can turn up to 4 mono synths into a 4-voice polyphonic synth. (I used this feature on another video, this time with 4 physical analog mono synths: [below]).

Therefore I used 3 of the tracks of the LXR-02 to play 3-note chords by the NDLR. I used the LXR's individual output, through the Strymon Bigsky reverb for the PADS (through the Pill ducking pedal being triggered by the LXR's drum kick).

I also used 1 track of the LXR-02 to play the ARP part (also sequenced by the NDLR). This time the individual output went through the Strymon Timeline delay.

The Erica Synths DB-01 was used to play the bass riff (still sequenced by the NDLR) through the Eventide - H9 pedal (with some heavy modulated Chorus bringing a Lo-Fi vibe to the sound!).

* Hardware used *

- BASS : Erica Synths DB-01 Bassline + Eventide H9 (Chorus)
- DRUMS : Sonic Potions x Erica Synths LXR-02 (individual output 1+2)
- PADS : Sonic Potions x Erica Synths LXR-02 + Strymon Bigsky + Pill Pedal (individual output 3)
- RIFF : Sonic Potions x Erica Synths LXR-02 + Strymon Timeline (individual output 4)
- LIVE SEQUENCING : Conductive Labs NDLR"

052▶️ Chains (NDLR // Polychain DB01, SE02, 0Coast, Circuit MS // Minitaur // Minibrute // Tanzbar)

video upload by 2-Minute Warning

"I wanted to use a couple of the nice features of the NDLR for this video, so I went to set up 6 analog mono synths all sequenced by the NDLR, a couple of effects and the Tanzbar drum machine for this video!

The first feature used here is poly chaining, where 1 track (PAD track) of the NDLR sent 4-note chords to 4 mono synths (Erica Synths - DB01, Make Noise - 0Coast, Roland - SE02 and Novation - Circuit Mono Station), considering them as a unique 4-voice polyphonic synth!

It reminded me a bit me my wonderful Vermona Perfourmer, where each voice of the synth can have different setting regarding the oscillators, envelopes, filter etc. 🤩

I needed to make some quite complex routing in order to be able to side chain the pads with the kick of the MFB - Tanzbar analog drum machine.

I also used the 'chord sequencer' of the NDLR in order to play the whole track as a song (it's like a song mode, where sequences automatically change the global chords).

Here are some further details on the setup:

* PAD: DB01 to SE02 to Bigsky (Right Input) to The Pill Pedal (Input 1) triggered by Tanzbar's kick
* PAD: 0Coast to Circuit Mono Station to Bigsky (Left Input) to The Pill Pedal (Input 2) triggered by Tanzbar's kick

These 4 analog synths were set up in order to respond to the poly chain function of the NDLR (i.e. With a 4-note chord, the NDLR will send each note to one the 4 synths).

* DRONE (Bass): The Moog - Minitaur was being triggered by the DRONE track for the bass.
* MOTIF (Melody): The Arturia - Minibrute 1, through the ZVEX - Instant Lofi Junky & Strymon - Timeline

I forgot to mention that the Tanzbär's main output was processed by the Eventide - H9 (Reverse Delay) effect, excluding its kick which was outputted on its separate output in order to trigger the side chain for the pads on the Pill Pedal."

Tek6 👾 (Roland TR-6S, J-6, JU-06A + Pill Pedal // Erica Synths DB-01 // Arturia Keystep Pro)

video upload by 2-Minute Warning

"For the 94th 2-Minute video (actually it will rather be "2 x 2-Minute" 😉), we are going for a an uplifting "melodic techno" jam, featuring the Roland JU-06A (synth chords), J-6 (synth chords), TR-6S (drums) ; Erica Synths DB-01 (Bass) ; Arturia Keystep Pro for the sequencing and live transposing parts!

The jams begins with the JU-06A playing a pattern sequenced by the Keystep Pro, where I play with the LFO rate modulating the PWM, allowing to transpose the the riff.

Then, enter the Drums with the TR-6S (only one pattern was used here with the TR-6S' internal sequencer, with probability on some sounds to add small variations 🤩) and the bass part played by the DB-01 Bassline (sequenced by the Keystep Pro).

At last the J-6 is being introduced to play some plucky chords: the simple chords have been sequenced on the Keystep Pro, however I used the "Arp/Rhythmic phrase" feature of the synth to make them syncopate.

* Hardware used *
- Roland TR-6S: drums
- Roland JU-06A + Pill Pedal (triggered by the TR-6S) : synth chords
- Roland J-6: synth chords
- Erica Synths DB-01 Bassline: bass
- Arturia Keystep Pro: sequencer"

Novation - Circuit Mono Station

videos uploaded by 2-Minute Warning

"You can find all of my videos featuring the Novation Circuit Mono Station analog mono synth (including a sequencer) here!"

Playlist
004▶️ Circuit Station (Electronic music jam with Novation Circuit Mono Station & Strymon Timeline)
008▶️ Drive Line (MFB Tanzbar, Novation Circuit Mono Station, Erica Synths DB01, Moog Minitaur)
009▶️ High Line (Perfourmer Mk2 // Circuit Mono Station + Bigsky // DB01 + Timeline // Tanzbar)
011▶️ Dark Blue | Part 1 (Novation Mininova, Circuit Mono Station, Strymon Big Sky + Timeline)

012▶️ Dark Blue | Part 2 (Circuit Mono Station, Mininova, Perfourmer Mk2, Minitaur)
024▶️ Drive Line 1k (DB01 + Timeline // CircuitMonoStation + Bigsky // Minitaur + Drive // Tanzbar)
1 Year ✨ of "2-Minute Warning" in 10 minutes! (Ft. Minitaur, DB01, MinilogueXD, Circuit, Strymon...)
043▶️ Circuits (Novation Circuit Tracks // Circuit Mono Station + Bigsky + Walrus Audio Julianna)
052▶️ Chains (NDLR // DB01, SE02, 0Coast, Circuit Mono Station // Minitaur // Minibrute // Tanzbar)

First jam with the Sequential Take5 analog poly synth (multi-tracked 3 parts: Pads, Lead and Bass)

video upload by 2-Minute Warning

"Just wanted to share with you my first jam with the Sequential Take5, 5-voice analog synth which I just received yesterday 😍

Apart from the drums, all the instrumental parts (actually 3 parts: Pads, Lead and Bass 😉) are from the Take 5 synth, where I've been playing with the knobs while recording!

Hope you'll enjoy 😊

Cheers,
2-Minute Warning."

Sky Fly 💫 (Vermona Perfourmer + Lethargy + H9 + Particle + Bigsky + Pill // Tanzbar // Keystep Pro)

video upload by 2-Minute Warning

"Wishing you a happy New Year for 2023 ! May it be filled with music 🎶, peace 🕊️ and love💕!
After experimenting during the last month of 2022 by publishing 7 'Shorts' let's start 2023 with a more than 2-minute video in order to compensate a bit this special month of December 😅

So for this one, only the Vermona Perfourmer was used for the synth parts (Bass, Arp & Pads) and MFB Tanzbar for the drum parts, with both instruments sequenced by the Arturia Keystep Pro.

* Hardware used *
- SYNTH: Vermona Perfourmer
- BASS (Voice1) Dry
- ARP (Voice2) + Dreadbox Lethargy (Analog Phaser) + Eventide H9 Max (Vintage Delay engine)
- PADS (Voices3&4) + Red Panda Particle 2 (Granular Delay / Pitch Shifting Pedal) + Strymon Bigsky (Reverb) + Pill (ducking pedal, triggered by the kick from Tanzbar)
- DRUMS: MFB Tanzbar
- SEQUENCER: Arturia Keystep Pro"

Aureate 📀 (Sequential Take 5 // Elektron Digitone + Red Panda Particle + Strymon Deco 2) Chords Jam

video upload by 2-Minute Warning

"No sequencers were harmed during this recording! 😄 Just wanted to roam with some chords played live on the Take 5 analog synth. Further on I introduced the Digitone FM synth where I used 3 tracks (with 3 different sounds), where 2 of the tracks have their integrated ARPEGGIO enabled, with different settings in order to add some rhythmic complexity to the jam 🥁

The Digitone is being fed into the Particle 2 granular delay then the Deco pedal, in order to add random variations to the FM sounds and some kind of LO-FI vibes!

The MIDI Out of the Take 5 synth is triggering the Digitone. Hence both synths are playing the same notes. However the 2 ARPs on the Digitone help bring the syncopated sounds.

I think that the blending of the analog and digital synths here, makes the global sound and texture of this jam sound quite interesting! Hope you liked it too? 😊

* Hardware used *

// PADS:
- Sequential Take 5 (5-voice analog synth)

// CHIMES:
- Elektron Digitone (8-voice FM groovebox) + Red Panda Particle 2 (granular delay and pitch shifter) + Strymon Deco 2 (tape saturation & doubletracker)"

Fragile 🍃 (Roland TR-6S Rhythm Performer // S-1 Tweak Synth // J-6 Chord Synth)

video upload by 2-Minute Warning

"Here's a 2x 2-Minute jam featuring 3 little boxes from Roland: the TR-6S (Drums), the S-1 (Bass and Arp) and the J-6 (Pads) 🐺

I've recorded a few patterns of each of the 3 instruments which are being chained up live in this jam.

On the DRUMS side played by the TR6S, there is quite a lot going on: I mainly used the Analog Circuit Behavior and FM Engines for the drum sounds. I used a few of the real time performance tools available: STEP LOOP, FILL IN, MASTER FX (Fuzz). I also took advantage of the polymectri capabilities of the sequencer, where the KICK's sequence length is different from the rest of the pattern (on the first part, it's a 6-step sequence playing, and on the last part, a 5-step sequence 😉).

For the BASS & ARP parts, I used the S1 (which fortunately is polyphonic 😃). I also played with its integrated 'Riser' effect for the transitions.

I recorded 3 patterns on the J-6, among which the last one is being syncopated thanks its 'phrase type' feature (a bit like an arpeggiator effect). The J-6 is being synced to the S-1 by their analog clocks (through the translucent cable, where you can see a little red LED lightening up with each clock pulse coming into the J-6)."

Fissure 💔 (Hapax 2.0 // Perfourmer Mk2 + H9 + Pill // TR6S // LXR02 // JU06 + Deco v2)

video upload by 2-Minute Warning

"February 2024, back to the 2-Minute format! (well actually it was a 4:30 jam with a bridge, an outro with different chords etc. but had to justify a bit the name of the channel I think 😅)

This jam is built around a 10-step pattern from the Hapax sequencing the Perfourmer (through the H9 reverb and Pill ducking pedal, triggered by a GATE track from the Hapax). To make this 10-step pattern which drives the whole track sound a bit more complex, I made it play with 3 different voices of the Perfourmer (this is one of the main reasons I bought a Perfourmer a few years ago!). Hence each note is playing a voice with a different oscillator. So it's a 10-step sequence where the oscillators are being played in round robin mode each 3 notes. To make it even more spicy, I also used the Hapax's real-time RANDOMIZER MIDI effect which is transposing some notes randomly!

For the PERCUSSIVE parts, we are in a more classic mode with the main DRUMS being played by the TR-6S and the secondary DRUMS by the LXR-02 (both still sequenced by the Hapax).

And the BASS, is being played by the JU-06A through the DECO v2 pedal."

Pure Mat ❤️ (Moog Matriarch Dark // Arturia Keystep Pro) live jam, analog synth, raw sound

video upload by 2-Minute Warning

"Pure Matriarch raw sound: that was the main idea behind this jam!
I used the Arturia Keystep Pro to play the Matriarch mainly for 2 reasons: the chord memory and scale features of the KSP and the easiness to visualize the notes being played by the Keystep's ARP 😃

What's happening?
1- The jam starts with only one oscillator playing on the Matriarch. I then gradually open up the filter and mix in the 3 other oscillators.
2- At the end I switch on the SYNC on the Matriarch and we can clearly hear the sharp and metallic sound, very characteristic of synced oscillators 🤘
3-The lovely analog stereo delay is playing an important role here in the sound as it is adding fluctuations (its time and feedback being respectively modulated by its 2 LFOs) and stereo width.
4-Note that I used on the Matriarch the SPLIT VCA mode where the Filter Envelope Generator signal controls the level of VCA 1 (Left output), and the Amplitude Envelope Generator signal controls the level of VCA 2 (Right output).

* Hardware used *

- Moog Matriarch Dark
- Arturia Keystep Pro"

Duo Mono 👥 (Make Noise 0-Coast + H9 // Moog DFAM + Multicomp // Arturia Keystep Pro)

video upload by 2-Minute Warning

"Going quite minimalist again with this jam featuring only 2 semi-modular analog mono synth (0-Coast & DFAM) and 2 effects (Eventide H9 & EBS Multicomp).

The Arturia Keystep Pro (KSP) was used to sequence both instruments (although I also used the DFAM's 8-step sequencer too 😄). I used 3 tracks on the KSP:
* Track1 - sending gates to sync the 0-Coast clock (for its Sample & Hold LFO) and to the DFAM
* Track 2 - sending CV to the DFAM to transpose its 8-step sequence (with some CV being sent with a 20% probability)
* Track 4 - sending CV & Gate to the 0-Coast to play the main riff (on 2 patterns).

So no MIDI involved for this time, only CV/gate sent between the Keystep Pro, 0-Coast and DFAM 😉

* Hardware used *
- SEQUENCE : Make Noise 0-Coast + Eventide H9 (Tape Delay)
- DRUMS/BASS: Moog DFAM +Erica EBS Multicomp
- Sequencer: Arturia Keystep Pro (+ DFAM's integrated 8-step sequencer)"

Going Live ☀️ (KeyStep Pro // Digitone // TR6S // SE02 +Apocalypse+Rooms // Nymphes +LofiJunky+H9)

video upload by 2-Minute Warning

"The set consists of 3 tracks already published on the channel (035- Kaoss ; 021- Black Box | Part 1 ; 065- 909) and 2 semi-improvised new tracks (actually built around 2 different patterns sleeping on my Digitone).

* Hardware used *
- DRUMS : Roland TR-6S
- BASS : Roland SE-02 + Pill Pedal (Input 1) + Death by Audio Apocalypse & Rooms
- PADS : Dreadbox Nymphes + Pill Pedal (Input 2) + Zvex Instant Lo-Fi Junky + Eventide H9
- Elektron Digitone + Korg KP3+ Kaoss Pad + Red Panda Particle 2

00:00 Kaoss (Intro)
02:34 Black Box (Part1)
05:23 Impro1 (New)
08:52 Impro2 (New)
11:54 909 (Outro)"

Ram ♈ (Waldorf M + Analog Heat + Rooms + Pill // TR6S // Minitaur // S1 + Particle // Keystep Pro)

video upload by 2-Minute Warning

"A 4-minute uptempo jam for the first video of 2024! 🎉 May all your wishes come true this year!

The Arturia Keystep Pro (KSP) is sequencing:
- the PADS played by the Waldorf M through the Elektron Analog Heat MkII (using mainly its analog filter modulated by one of its LFO) + Rooms reverb + Pill ducking pedal (triggered by the kick from the TR-6S).
- the BASS played by the Moog Minitaur. I used the 'Chain' patterns of the KSP to make a long bass line.

The DRUMS are being sequenced/played by the Roland TR-6S (I used its onboard filter on the master BUS for the builds).

And the LEAD sound played in real time on the Roland S-1 synth, through the Red Panda Particle 2 granular delay."

Shuffle Trip 🔀 (Elektron Digitone + Particle + Deco // Korg Drumlogue // Sequential Take 5)

video upload by 2-Minute Warning

"This track starts with a PAD sound sequenced and played by the Elektron Digitone (Polyphonic Digital Synthesizer). I then enable the Doubletracker effect (on the Strymon Deco 2 tape simulation pedal) and unmute 2 other tracks on the Digitone, playing a LEAD and CHIMES sounds.

Enters the Korg Drumlogue (analog and digital drum machine) with some DRUMS (I used only one drum pattern where I made use of STEP probability to add some variations to the pattern).

And finally the BASS line played by the Sequential Take 5, sequenced by one MIDI track of the Digitone. In order to create this beefy dirty BASS sound, I use the onboard OVERDRIVE and DISTORTION effect of the synth! 😎🤘 The BASS line is also playing in triplets to add an odd groove to the track (it wasn't so easy to program on the Digitone MIDI track as I needed to shift each notes off the grid manually 😅).

Hope you'll enjoy!"

Novation - Circuit Tracks

videos uploaded by 2-Minute Warning

"My videos/tracks featuring the Novation - Circuit Tracks groovebox, consisting of:
- 2 synth tracks
- 2 MIDI tracks
- 4 drum tracks"

Playlist:
041▶️ Court Circuit ⚡ (Novation Circuit Tracks // Roland JU06A)
043▶️ Circuits (Novation Circuit Tracks // Circuit Mono Station + Bigsky + Walrus Audio Julianna)
049▶️ Polyribbon (Circuit Tracks + H9 // Ribbon + Julianna + Analog Drive + Bigsky)
054▶️ Bio-CyberPunk 🎸🤘(Minibrute + Data Corrupter + Strymon Timeline // Novation Circuit Tracks)
055▶️ Rooms (Korg Minilogue XD + Sinevibes Odds + Death By Audio Rooms // Novation Circuit Tracks)

Diatonic 〽️ (Waldorf M 1.08 // MAM Adx1 // Arturia Keystep Pro)

video upload by 2-Minute Warning

"The Waldorf M just got a very nice update (v1.08) and it was a good reason to celebrate with a new video of the M in multi-mode, sequenced by the Arturia Keystep Pro.
My good old buddy the Music And More (MAM) ADX1 5-voice analog drum machine was also taken out for this special occasion to take care of the beat!
Recorded in one shot.

The 8-voices of the M can be limiting when the synth is used in the multi-timbral mode (4 parts), but hey, the creation of this channel was based on the concept of making music in a constrained environment, so it was a nice challenge again 😅

* Hardware used *

- ALL SYNTH parts : Waldorf M
- Output 1: PLUCK riff + Eventide H9 (Diatonic)
- Output 2: PADS + Darkglass Microtubes X (Distortion) + Walrus Audio Julianna (Chorus, Vibrato) + Strymon Bigsky (Reverb) + Pill Pedal (Ducking, triggered by the Keystep Pro kick's gate output)
- Output 3: CHIMES melody + Red Panda Particle 2 (Granular delay) + Death By Audio Rooms (Reverb)

- DRUMS : Music And More ADX1

- All synth & drum parts sequenced by the Arturia Keystep Pro"

Dancer 🕺 (NDLR // Nymphes + Lofi + Bigsky // DB01 // TR6S // 0Coast + Timeline + Particle // SE02)

video upload by 2-Minute Warning

"Here is my latest track featuring the inspiring NDLR 4-track sequencer, trying to do something more uptempo this time (the NDLR really excels at doing ambient tracks, but can it be used for some more 'techno' tracks? 🤔 Hope we'll get an answer thanks to your comments 😉)

I used 4 analog tracks for this jam (Nymphes, DB01, 0Coast and SE02), sequenced by the Conductive Labs NDLR sequencer. The drums were sequenced and played by the Roland TR6S 'rhythm performer' (where I used mainly the Analog Circuit Behavior and FM engines). Recorded in one take.

* Hardware used *
- PADS: Dreadbox Nymphes + Zvex Instant LoFi Junky + Strymon Bigsky + Pill Pedal (triggered by the TR-6S)
- BASS: Erica Synths DB-01 Bassline
- MOTIF-1: Make Noise 0-Coast + Strymon Timeline (Delay) + Red Panda Particle 2 (Granular Delay)
- MOTIF-2: Roland SE-02
- DRUMS: Roland TR-6S
- Sequencer: Conductive Labs - NDLR (sequencing all 4 synths)"

Higher Ground (Roland JD08 // JU06A // TR6S // Arturia Keystep Pro)

video upload by 2-Minute Warning

"After a small break (though it's the first time I've taken so long to upload a new video since I created this channel 😊), here is a new video featuring a new Roland Boutique synth: the JD-08!

This digital synth is renewing the famous Roland JD-800 from 1991! The JD-08 is a 128-voice synth, with 2 parts. Each part has 4 layers (each layer can be considered as being a full synth, with its own waveform, filter, envelopes etc.). So it has enough power to create some nice sounds and textures!

So for this video, the JD-08 is playing a chimes sound (sequenced by track 4 of the Keystep Pro) and a string sound (played live). The bass is sequenced by track 2 of the Keystep Pro. As for the drums, they are coming from the TR-6S (sequenced by its internal sequencer).

* Hardware used *
- Roland JD-08 : Chimes & Strings
- Roland JU-06A : Bass
- Roland TR-6S: Drums
- Arturia Keystep Pro: sequencer

#jd08 #ju06a #tr6s
@rolandeurope
@ArturiaOfficial"

Pilot 🧭 (TR-6S with new "808 Chromatic Bass", sequencing MAM ADX1 + Timeline // Sequential Take 5)

video upload by 2-Minute Warning

"In this jam, I'm exploring the Roland TR-6S' capability to sequence external instruments, in this case the MAM (Music And More) ADX-1, 5-voice analog drum module 🥁!

I used 4 tracks (white illuminated faders, labeled LT, HC, CH and OH) of the TR-6S to sequence 4 parts of the ADX-1 (named Synth, Snare, Hihat and Metal). I even used the "alternate instrument" sequencing feature of the TR-6S to sequence for example the closed/opened Hihat of the ADX-1 (i.e. sending 2 different notes to only one part of the ADX-1) 😃

At first I only wanted to use the TR-6S as a sequencer (not its internal sounds), however I ended up using on Track 1 its "CR-78" kick, on Track 2 its new "808 Chromatic Bass", and also layering the parts played by the ADX-1 with sounds from the TR-6S (4 last tracks). Fun fact: I didn't use any samples here 😉 All the sounds coming from the TR-6S are from the modeling ACB (Analog Circuit Behavior) engine!

To be able to change the bass pitches coming from the TR-6S, I used different "variations" of the pattern, with different tunings of the "808 Chromatic Bass".

It was not very easy to jam with the Sequential Take 5 synth and change the pattern's variations at the same time, but nonetheless still fun and challenging 😅


* Hardware used *

// PERCUSSIONS:
- Music And More (MAM) ADX-1 (5-voice analog drum module) + Strymon Timeline (digital delay)

// DRUMS, BASS & SEQUENCER:
- Roland TR-6S (digital rhythm performer drum machine)

// PADS:
- Sequential Take 5 (5-voice analog synth)"

Cosmos 🌌 (Waldorf M + Rooms // Vermona Perfourmer + Timeline + LoFI Junky + H9 ; Erica Synths LXR02)

video upload by 2-Minute Warning

"I used 3 instruments for this track (recorded in one shot): the WALDORF taking care of the pads, the VERMONA Perfourmer Mk2 of the bass, lead & plucks and finally the SONIC POTIONS x ERICA SYNTHS LXR-02 for the drums.

The 2 synths were sequenced by my DAW (as for the drum machine, I used it's quite powerful sequencer with the probability feature for a couple of notes).

The M (8-voice, hybrid digital/analog synth) is being used in multi-mode with 2 pad sounds (I introduced the 2nd sound in the middle of the jam), all through the DEATH BY AUDIO Rooms pedal reverb.

As for the Perfourmer (4-voice, full analog synth), the:
- 1st voice was used to play the bass.
- 2nd voice a LO-FI lead/bass sound thanks to the ZVEX Lo-Fi Junky and EVENTIDE H9 (CrushStation).
- 3rd voice was used to play a pluck sound. I plugged in the MOOG analog MF Delay in its insert jack, and everything was routed out to the STRYMON Timeline delay.
- 4th voice was also used to play a pluck sound, routed as with voice 3, to the STRYMON Timeline.

* Hardware used *
- PADS: Waldorf M + Death By Audio Rooms
- BASS, LEAD, PLUCK : Vermona Perfourmer Mkii + Zvex Instant Lo-Fi Junky + Eventide H9 + Moog MF Delay + Strymon Timeline
- DRUMS: Sonic Potions x Erica Synths LXR-02"

Lunar - Ambient Noise 🎄 (Arp 2600 m // Waldorf M + Red Panda Particle 2 // Arturia Keystep Pro)

video upload by 2-Minute Warning

"For the last video of 2023, I really wanted to spotlight the raw sound of the amazin ARP 2600 M 🤩
So throughout the whole track, you'll only hear the sound coming directly from the ARP 2600 M without any external effects, though I did use its onboard spring reverb (+ a bit of EQ/comp where used for mixing purposes).
Contrary to my previous (which was the first) video featuring the ARP which was an uptempo track, no beats or kick here! Only the ARP and the Waldorf M (+ Particle granular delay).
The same track from the Keystep Pro is sequencing both synths.

As you can see, I use some patching in this one for the ARP:
 - The VCF output is going through its preamp input to make the distorted sound you gradually hear (it's being played in parallel of the dry sound coming out from VCF output)
 - I also used the LFO to modulate the filter and pulse width of oscillator 2
 - I did did some patching as well, in order to play portamento with one of the ARP's oscillator (using the voltage processor "Lag Time")

* Hardware used *

// SYNTH:
 - Korg ARP 2600 M (semi modular analog synth) - RAW sound
 - Waldorf M (8-voice hybrid digital and analog wavetable) + Red Panda Particle v2 (digital granular delay)

// SEQUENCER:
 - Arturia Keystep Pro"