MATRIXSYNTH: Search results for Aleatoric Machine


Showing posts sorted by date for query Aleatoric Machine. Sort by relevance Show all posts
Showing posts sorted by date for query Aleatoric Machine. Sort by relevance Show all posts

Sunday, December 17, 2023

Gater - Serge Gated Comparator Sketch


video upload by Memetune Studio

"Using the Loudest Warning versions of the Ken Stone Gated Comparator to play the Serge system. The GC takes 2 inputs (any time-varying voltage source and a clock source) and sends out a variety of CVs and Gates based on the incoming clock, using 8 shift registers that sequentially pass the voltages along. Its hard to explain what's happening, because there are a few extra details that complicate it. One is that each of the 8 steps can have an offset voltage added with a knob setting. Also there is a loop function which can be different to the inputs. Then there are different outputs - a mix of all the voltages on each step, or random voltages per step. A range knob sets the general voltage range its going to output, and there is a sensitivity knob to control how much of the variable cv input is setting off the stages. Its pretty hit and miss, and is one of those modules that is best just experimented with, but it can give amazing results that can't be done on anything else (apart from other modules based on this idea, such as the Rungler, Klee sequencer, Turing Machine, etc). Its great for semi-random sequences of notes and other cvs, as well as gates and timing pulses

In this patch I'm using one GC (on the right of the panel) to do the pitches and a second one (far left) to send out cvs to control the timbre of the oscillator. This second GC is a slimmed down version with less controls and no individual gate outs, but its the same thing in principle

The strange wonky rhythms are being made with a combination of the window comparators and the EG which has an equally baffling array of input and output options

So in other words, this is a an extremely fun panel to experiment with when making aleatoric music 😁"

Friday, April 28, 2023

Make Noise & Mood


video upload by Aleatoric Machine

"An ambient-ish eurorack modular synthesizer patch (with pedals!), featuring:
Make Noise 0-Control, XPO, QPAS, Mimeophon, Maths, modDemix, LxD & XOH
DivKid/Instruo øchd
Strymon AA.1
Chase Bliss MOOD mkII & Dark World

All of the sounds in this patch originate from a single VCO — the XPO — sequenced by the 0-Control. The percussive voice is the stereo square wave output into into the QPAS, then the Mimeophon. The filter envelope comes from the envelope output on the 0-Control. The gate output for the last step in the sequence on the 0-Control strikes the !!¡¡ input on the QPAS. The XPO and QPAS are modulated by different LFOs from the øchd. The smooth voice is the mono sawtooth output into the the 12 dB filter of the LxD, then the LxD’s 6dB filter, then the AA.1 to interface with the MOOD and Dark World pedals. The 12dB filter envelope comes from Maths, triggered by the gate output from the 0-Control. The 6dB filter is controlled manually with an offset from Maths. Both voices go through the XOH directly into my camera (listening to the final mix, it could have used a limiter, but oh well).

I start with the MOOD 100% dry and the 6dB LxD filter completely closed, so all you hear is the square wave and delay from the Mimeophon. I slowly open up the 6dB LxD filter and increase the amplitude of the filter envelope on the QPAS. Then I bring in the wet channel of the MOOD in reverse slip mode, tuned up a fifth, which introduces some harmony and counterpoint. I play around with the MOOD mix and the filters for a while, then turn up the clock on the MOOD before bringing in the loop channel, also in reverse, for more harmony and polymeter. Then I start bringing the filters back down, while increasing the mix of the MOOD. I turn the clock back down and turn the filters down and the mix all the way up until all you hear is the backward loop from the MOOD. That’s it!"

Wednesday, April 19, 2023

Yamaha DD-14 w/ 25 Point Patch Bay Mod

Note: This site contains affiliate links for which it may be compensated.


via this auction

"Rare 1993 MIDI drum machine with a custom 25 point patch bay. This modification generates an array of original sounds, effects and rhythmic variations. Making a single connection on the patch matrix can dramatically alter the output but applying multiple connections produces an increasingly complex, sometimes aleatoric range of fractured, reversed, tonal, bit crushed, flanged, distorted, aliasing and delayed effects, 16-bit arcade sounds and digital noise, alternative rhythmic patterns and additional accents. The five included patch cables can also be stacked for further sonic manipulation.

The patch bay affects the 100 tempo adjustable onboard rhythms and tracks in addition to the pads and scraper which produce some great degraded digital effects and percussion hits.

Features:
8 velocity sensitive drum pads.
A 'scraper' ribbon controller for the performance of preset instruments, scratching and rolls.
100 preset rhythms with instrumental accompaniment options.
75 PCM percussion and effects sounds.
30 percussion sets.
Selectable roll, flam and echo effects.
Auto bass/ chord function.
Three user song memory.
608 mm x 281 mm x 105 mm."

Monday, February 20, 2023

Stoicism //SIG+/XPO/QPAS/Mimeophon//


video upload by Aleatoric Machine

"A self-playing Eurorack modular synthesizer patch featuring Make Noise’s XPO, QPAS & Mimeophon, and Stochastic Instruments’ Stochastic Inspiration Generator (SIG+). Plus many more modules described below.

Everything you hear in this is coming from a single monophonic sequence from the SIG+ and a single Make Noise XPO. I’m pretty amazed by how much variety of tone and texture can come from this single oscillator, all at the same time. The different waveform outputs are each running through their own VCAs, filters, triggers, and effects, but the melodic content is all the same. I’ll go through the sequencing in a minute, but first I’m going to focus on the audio signal paths.

Overall, the XPO’s L & R modulation are controlled by a triangle LFO coming from Acid Rain’s Maestro.

The first output is the stereo square wave, which goes through QPAS and Mimeophon, then into the mixer. QPAS’s L & R rotation and Q are modulated by two different smooth random waves from ALM’s Pamela’s Pro Workout. Mimeophon’s repeats are modulated by a smooth random wave coming from Maestro. This voice is triggered by a bouncing ball coming from Make Noise’s Maths.

The second output is the mono triangle wave, which first goes through an Intellijel 1U VCA, then uses Intellijel’s 1U pedal I/O to go through a Chase Bliss Mood (repeats tuned up a 5th) and Chase Bliss Dark World, then into the mixer. This voice is triggered by another bouncing ball from another Maths.

The third output is the mono sawtooth wave, which goes through channel one of a Make Noise ModDemix, an Intellijel Morgasmatron (with panning controlled by separate LFOs going to the L & R FM1 inputs - LFO 1 coming from Mutable Instruments’ Tides and LFO 2 coming from Intellijel’s Rubicon 2), then a Happy Nerding FX Aid XL running a flanger algorithm, then into the mixer. This voice is triggered by a repetitive Euclidian rhythm coming from Acid Rain Constellation and Doepfer Dual ADSR.

The last output is the spike wave going through channel two of the ModDemix, a Doepfer Multimode VCF, and Strymon’s Magneto in shift mode, then into the mixer. Magneto’s repeats are modulated by another smooth random wave coming from Maestro. This voice is triggered by a slower Euclidean rhythm coming from Constellation and Make Noise’s Contour.

Each voice goes into Doepfer’s VC Stereo Mixer, which has a built in VCA on each channel. The level of each voice is independently controlled by a separate smooth random wave from Pam, so the mix is constantly evolving. The voltages coming from Pam are further slewed by Mutable Instruments’ Stages, since the smooth random wave from Pam can still have some sharp edges. Then the whole mix goes through a 2HP Verb, with the reverb mix modulated by another smooth random wave from Pam, and finally through Endorphines’ Golden Master, which connects directly to the Intellijel 7U Performance Case’s built in audio outputs.

Now for the melodic content and harmonic structure. This is all driven by Stochastic Instruments’ Stochastic Inspiration Generator (my first patch with it!). This is an incredible module. I won’t go into everything it does, as there are already a couple very helpful videos out there on that, but suffice it to say that it lives up to its name! I’m using multiple channels, each with its own tonality, then cycling through those via an ALM Boss Bow Two switch to determine which channel will control the v/oct pitch of the XPO. The Boss Bow’s channel is control by a sequence coming from another Stages. Channel one is just a low C, to establish the primary key. Channel two randomly selects pitches from a C major chord, with low C in the bass. Channel three selects pitches from an F minor chord, with an occasional 2nd and 4th and a low F in the bass. Channel 4 selects pitches from a D flat major chord, with an occasional 6th and a low D flat in the bass.

I’m not sure if this is indeterminate enough to be considered generative, since the harmonic content is fairly structured, even if the melody, rhythm, and balance of the parts are all random. It’s more, well, aleatoric. I hope you enjoy it (although I realize than if you are into this sort of thing, you are born of a special breed!)."

Sunday, November 13, 2022

First Patch with System Cartesian and 0-Coast/0-Control/Strega


video upload by Aleatoric Machine

"New toys! Ambient eurorack modular synth patch featuring Make Noise Wogglebug, Rene2, STO, Telharmonic, Maths, LxD, Mod Demix, Rosie, 0-Coast, 0-Control, and Strega."

Sunday, November 06, 2022

Progress //XPO/QPAS/Mimeophon/STO/Rings/Tides/Rubicon/Morgasmatron//


video upload by Aleatoric Machine

"An ambient, self-playing eurorack modular synth patch featuring:
Make Noise Rene 2, XPO, QPAS, Mimeophon, STO, Maths, Contour, Mod Demix
Mutable Instruments Marbles, Rings, Tides, Beads, Stages, Links, Kinks
Intellijel Rubicon, Morgasmatron, Mixup, 1U Tiles
Strymon Magneto
Doepfer Multimode VCF, VC Stereo Mixer
Mosaic State Variable Filter
Acid Rain Constellation, Maestro
Malekko Voltage Block
ALM Pamela's New Workout
Ornament and Crime
Chase Bliss Mood, Generation Loss, Dark World
Lots and lots of wires"

Saturday, October 29, 2022

Muster //XPO/QPAS/Mimeophon/STO/Mother32/Tides/Magneto//


video upload by Aleatoric Machine

"An ambient eurorack modular synth patch featuring:
Make Noise XPO, QPAS, Mimeophon, STO, Rene 2, Maths, Contour, Mod Demix
Moog Mother 32
Mutable Instruments Tides, Stages
Mosaic 1u drum tiles
Strymon Magneto
Acid Rain Constellation, Maestro
Malekko Voltage Block Doepfer Dual ADSR, Stereo Mixer 2hp Verb Chase Bliss Mood, Generation Loss ALM Pamela's New Workout Intellijel 1u utility tiles

Tuesday, October 04, 2022

Instill //Subharmonicon/DFAM/Mother 32/Tides/Rings/Plaits//


video upload by Aleatoric Machine

"An ambient eurorack modular synthesizer patch featuring:
Moog Subharmonicon, DFAM, Mother 32 x 2
Mutable Instruments Marbles, Rings, Plaits, Tides, Stages
Make Noise Maths, Function, Mimeophon
Doepfer VCF, VC Stereo Mixer
Strymon Magneto
2hp MMF, VCA, Verb
Ornament and Crime
ALM Pamela's New Workout, Pexp-1
Expert Sleepers Disting mk4
Acid Rain Maestro, Constellation
Malekko Voltage Block
Intellijel Mixup, lots of 1u tiles
Chase Bliss Mood, Wombtone, Dark World"

Wednesday, June 01, 2022

Almost Forgotten //Marbles/Rings/Plaits/Tides/Mother 32/Matriarch/STO//


video upload by Aleatoric Machine

Eurorack modular synthesizer patch featuring...
Mutable Instruments Marbles, Rings, Plaits, Tides, and Stages
Moog Matriarch (out of frame) and Mother 32
Make Noise STO and Maths
Malekko Voltage Block
Qu-Bit Chance
Expert Sleepers Disting mk4
Doepfer Dual ADSR and VC Stereo Mixer
Intellijel Mixup and VCAs
ALM Pamela's New Workout
Squarp Pyramid

Monday, February 07, 2022

Marble Jam //Marbles/Subharmonicon/Mother 32/STO/Rings/Tides/Magneto/Maestro/Voltage Block//


video upload by Aleatoric Machine

"I’ve wanted to try this for a while. The two channels from Mutable Instruments Marbles are playing the two channels of Moog Subharmonicon, with a sound that reminds me of a Fender Rhodes, through Strymon Magneto. A couple different clocked LFOs from Acid Rain Maestro cause the pitches from Marbles to keep gravitating back to the tonic, with some jamming in between. Mutable Instruments Rings repeats a single note in a Euclidean rhythm coming from ALM Pamela’s New Workout, but modulating the structure causes the ringing to drift up and down from a fifth to an octave. Moog Mother 32 and Make Noise STO double on the bass line. When the melody finally comes it, it is Mutable Instruments Tides through Chase Bliss Warped Vinyl, Mood, and Dark World. Malekko Voltage Block handles the mix scenes, with Mutable Instruments Stages providing slew in between."

Sunday, February 06, 2022

Two by Four //Subharmonicon/Mother 32/Plaits/Rings/Tides/Mimeophon/Magneto//


video upload by Aleatoric Machine

"The fun part about this patch is that all of the pitch sequencing comes from the Moog Subharmonicon. Including the bass line. Subharmonicon starts doing its thing with the two four note sequences. It goes through Make Noise Mimeophon to double up the polyrhythm pattern. Mutable Instruments Rings follows the pitch of sequence one, while Mutable Instruments Plaits (in a Rings-ish voice) follows sequence two. Moog Mother 32 samples and holds a pitch from sequence two at random intervals. Both sequences run into Expert Sleepers Disting mk4 in min/max mode. Mutable Instruments Tides and Make Noise STO double up on the base line, which is the min value of the two sequences, periodically switching to the max value (when it sounds like it goes to the 4 chord). The overall mix sequencing is handled by Malekko Voltage Block, with 2x Make Noise Maths controlling the slow fade between settings.

Also starring Intellijel Steppy sequencing Mosaic drum modules, XAOC Zadar and Qu-Bit Chance for modulation, Mutable Instruments Stages for some LFOs, Strymon Magneto on Plaits, and Chase Bliss Mood and Happy Nerding FX Aid on Mother 32."

Monday, January 17, 2022

This Is 52 //Subharmonicon/Mother 32/STO/Plaits/Rings/Mosaic/Mimeophon/Magneto/Stages/Chance/Maths//


video upload by Aleatoric Machine

"Eurorack modular synthesizer performance.
Variations on 3 different 4 note sequences.
Moog Subharmonicon generates the 2 primary rhythmic sequences, running through Strymon Magneto. Sub 1 of the first sequence runs through its own output, then through 2hp MMF and Make Noise Optomix for the rhythmic bass line.
Moog Mother 32 generates the descending drone sequence, which is doubled by Make Noise STO tuned up an octave, both run through Chase Bliss Mood, tuned up a fifth.
Mutable Instruments Rings follows the pitch of the descending sequence, with a bouncing ball rhythmic pattern generated by Make Noise Maths and Function, then run through Make Noise Mimeophon. The drifting harmonic tone on top (unison, +5, +12) is the result of modulating the structure of the Rings sound.
Mutable Instruments Plaits chimes the fifth at the beginning of every 8 bars, as well as being trigger by the end of rise on the Function.
Drums are coming from Mosaic Bass, Snare & Hi-Hat modules, sequenced by Intellijel Steppy 1U. Decay on Hi-Hat is a 7 step pattern generated by Mutable Instruments Stages.
The volume and filter cutoff for the drums and rhythmic bass are controlled by Make Noise Pressure Points, with decay slew controlled by a second Make Noise Maths.
Lots of modulation across different parameters is generated by Ornament & Crime and Qu-Bit Chance.
I think that's it."

Sunday, July 04, 2021

Insomnia //Bloom/Chord/Subharmonicon/Mother32/STO/Rings/Plaits/Tides/Zadar/Ornament&Crime//


video upload by Aleatoric Machine

"Self-playing eurorack modular synthesizer patch
Variations on a 4 note sequence
Bloom plays one variation via Chord, STO, and Tides, with envelopes controlled by Contour and Function, and harmonization by Mood
Plaits and Rings play 2 variations from 2 different Turing Machines on Ornament & Crime, with masks controlled by sequences from 2x Stages and bouncing ball patterns generated by 2x Maths
Mother 32 plays another variation
Subharmonicon plays another variation
Chance and Wogglebug provide modulation
Mimeophon and Magneto provide delay
2x Verb provide reverb
4x 1u VCA provide dynamics
Overall form controlled by 4 envelopes from Zadar
Mixed into 2x Mixup"

Sunday, June 27, 2021

Revelation // Modular Synthesizer / Moog Mother 32 / Mutable Instruments Marbles Plaits Rings Tides


video upload by Aleatoric Machine

"Eurorack modular synthesizer patch featuring:
- Mutable Instruments Rings through Strymon Magneto playing a bouncing ball pattern generated by Make Noise Maths, with structure modulated by MI Marbles
- MI Plaits playing a cyclical percussion pattern generated by Maths and MN Function, with model sequenced by MI Stages
- MI Tides through MI Warps and MI Ripples playing a repeating pattern generated by MI Marbles, envelope controlled by MN Contour
- 2x Moog Mother 32 each playing their own sequence, with tempo modulated by Qu-Bit Chance and Ornament & Crime
- Upper Moog effected by Happy Nerding FXAid in Delay into Dual Shimmer mode
- Lower Moog effected by Chase Bliss Mood in Slip mode, Spectre, and Dark World, through Intellijel Pedal I/O
- Lots of random modulation from Marbles, Qu-Bit Chance, and Ornament & Crime in Low Rents mode
- Overall depth of modulation controlled by Intellijel Quadratt and VCAs
- All parts are asynchronous"

Saturday, June 06, 2020

DrumKid tutorial


Published on Jun 6, 2020 Nerd On The Wire

"DrumKid is the lo-fi aleatoric drum machine that I've been working on for the past two years. It reached the final of the Hackaday Prize 2019, and is now available to buy online from https://mattbradshawdesign.com/store"

Saturday, September 28, 2019

DrumKid - Hackaday Prize 2019 final video


Published on Sep 28, 2019 Nerd On The Wire

"DrumKid, my open source drum machine, has made it through to the 2019 Hackaday Prize final! The finalists were asked to make a 5-minute video of their projects, so I made a new, better video of DrumKid in action.

DrumKid will be available to buy in November 2019 from my website: http://mattbradshawdesign.com

You can see all the details of the project on my Hackaday page: https://hackaday.io/project/164521-dr..."

Also see: Nerd On The Wire DrumKid "aleatoric" Drum Machine

Thursday, August 22, 2019

Nerd On The Wire DrumKid "aleatoric" Drum Machine


Published on Aug 22, 2019 Nerd On The Wire

Nerd On The Wire also brought us the Synth Guitar for DesignSpark Summer of Sound Challenge, and PolyMod open source modular synthesizer for Hackaday 2018.

"DrumKid is an 'aleatoric' drum machine, meaning it uses random numbers to determine the rhythm and sound of a drum beat. It comes in a handheld, battery-powered unit, designed for live performance.

This is my entry video for the 2019 Hackaday Prize - the Hackaday project page can be found here: https://hackaday.io/project/164521-dr...

This project is open source - all design files can be found here: https://github.com/mattybrad/drumkid"


"Drum machine are ubiquitous in modern music, but playing them live presents a challenge. When playing electronic rhythms live, whether using a drum machine or a laptop, it can often appear that a musician is simply pressing "play" on a backing track, removing much of the perceived spontaneity of a live performance.

My drum machine, DrumKid, aims to tackle this problem by using a variety of controls to alter a drumbeat live, using randomly generated drum hits which augment the original beat. Rather than being designed as a pre-programmed backing instrument, DrumKid aims to be a playable instrument in its own right, with continuously adjustable controls that work well in a live setting. My intention was to create an engaging, interactive device that, like any musical instrument, can be mastered over time with practice.

DrumKid is an open-source, hackable product based around an ATmega328 chip, as found in an Arduino Uno. The final product features a minimalist design consisting of a single PCB with buttons, knobs, and LEDs mounted on one side, and all other components mounted on the other side. Two laser-cut sections are used to protect the electronics.

I now have a fully working prototype of DrumKid, and I am happy with the audio quality, playability, aesthetics, durability, reliability, and battery life. I am planning to make a small, initial batch of DrumKid units in September to distribute to musicians for testing. After any necessary updates to the PCB design and/or firmware, I hope to build a larger batch of units and launch DrumKid for sale around November/December 2019.

DrumKid can also be constructed as a breadboard/stripboard project using an Arduino Uno - see the build instructions for details."

Monday, April 01, 2019

Monome Aleph Very Rare Synthesizer Programmable Effect Box

Note: This site contains affiliate links for which it may be compensated.

via this auction

Soundcomputer.

powerful audio processor, synthesizer, noise machine, rapidly modifiable instrument. a platform for experimental practice and organic discovery.

attachments.

connect grid controllers, modular synths, midi keys, stomp boxes, gamepads, hand-made circuits. for more direct control and uncommon pairings.

topography.

dynamically arrange control mappings with unprecedented flexibility. create software control sources such as modulators, logical operators, aleatoric processes, sequencers. all quickly storable and recallable.

Tuesday, July 03, 2018

Monome Synth Module - Aleph Sound Computer Synthesizer

Note: This site contains affiliate links for which it may be compensated.

via this auction

"designed and engineered by ezra buchla [Don Buchla's son] and brian crabtree::

%100 percent functional and looking great!
w/ 4Gb SD card,
loaded firmware,
original instructions,
and mysterious still photography
that came with the unit.

}


Description from :
URL :: https://monome.org/aleph/

aleph is an adaptable soundcomputer where synthesis, drum machines, samplers, loopers, and various other possibilities can be implemented with creative mapping and numerous external control methods-- attach via USB (grid controllers, knob boxes, MIDI keyboards, gamepads), CV (control voltage for modular synths, foot switches, etc) and computers.

simply put, aleph is a small audio input/output device with a screen, bank of buttons, and series of encoders/knobs. it has the ability to host and run a variety of programs created by both monome and the user based community surrounding. new applications will be developed, documented and shared over time. elaborate mappings can be created without writing code by way of an easy menu driven environment and a thorough preset system.
soundcomputer.

powerful audio processor, synthesizer, noise machine, rapidly modifiable instrument. a platform for experimental practice and organic discovery.

Sunday, August 28, 2016

M13 Core


Published on Aug 28, 2016 davidryle

"An ambient aleatoric modular patch.

Noise Engineering Numeric Repetitor sending gate pulses to the Tonnetz Sequent which is sending (modulo) pitch cv to three Q106 vco's. Filtering and EG's are all synthesizers.com and Oakley Audio.

A Flame Chord Machine is also used for pitch duties to three more Q106 vco's and a Mutable Instruments Rings.
There are doubling of the pitch data to a noise patch using a pink noise source and a pair of Q960 sequencer to control a cv FM Radio module to a CGS Real Ring Modulator then through a MOTM 440 LPF into an Encore Frequency Shifter. The FS is cv modulated by a 10v signal from MI Frames. The Down output of the FS is sent directly to Clouds right channel. The Up output of the FS is sent through a Makenoise Echophon in pitch shifting mode. It is 1v/oct controlled from a fourth channel out of the Flame Chord Machine. The feedback output of the Echophon is sent to the left channel input of Clouds the left output of Clouds is returned to the Echophon feedback input and the mix out is back into Frames via a Yusynth Minimoog filter.

Frames is amplitude modulating the Clouds outputs.

Loads of pseudo random voltage and gate timings from two Turing Machines and 4MS QCD. The main clock is from Cubase dinsync to a Pamela's Workout.

Intellijel Plog is used for a Malekko Switch module to shift the vco third and fifth cv's from the Tonnetz, and the input to the Chord Machine. It is also used to toggle the 2nd Tone factor on the Chord Machine.
Two Maths and a Quadra are employed to control timing to the Frames automation.

Other FX include a Z-DSP in Halls of Valhalla, a Behringer Chorus Space pedal and a Strymon Blue Sky pedal. A pair of Lexicon MX200's are used for subtle reverb and delay."
NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH