via
this auctionNote this is not an ARP 2600 clone.
"This synth is almost entirely made from Ray Wilson's designs and his high quality PCB's (
www.musicfromouterspace.com). It's a completely home made affair, and as such I would prefer bidders to be familiar with Synth DIY techniques, as calibration and trouble shooting is not for the feint of heart : )
No keyboard is supplied, and as such you will need either a MIDI to CV converter or Keyboard capable of delivering the standard 1v/Oct, Gate and Trigger.
The case is made from 12mm, black Tolex covered MDF (unfortunately the Tolex on the back panel has started to lift, so will need to be re-glued), with protected corners and carrying handle. All the panels are made from 2mm aluminium with dye sublimated graphics directly onto a 0.5mm aluminium substrate. As you can see from the pics, the panels are mounted quite crudely onto the MDF frame and would benefit from someone who's prepared to spend a bit of TLC on it. All circuit schematics and calibration info is included.
The measurements are: 215mm (D) x 840mm (W) x 490 (H) and weighs 16 kilos
As it stands, all modules are fully working and consists of the following:
4 x VCO - 3 x CV Mod inputs, 1 x Linear FM input, 2 x PWM CV inputs, Sync in/out, Saw, Square, Triangle, Sine outs
1 x 24dB Low Pass VCF - 4 x Signal inputs, 2 x CV Mod inputs, 1 x Resonance CV Mod input, VCF out
1 x 12dB State Variable VCF - As above but with Low, Band and High Pass outputs
2 x VCA - Signal in, 2 x CV Mod inputs, Log/Lin select, VCA out
3 x ADSR - Gate in, Trigger in, Short/Long Time switch, Gate indicator, ADSR out
2 x Voltage Controlled LFO - 2 x CV Mod in, 1 x PWM CV Mod in, Saw, Square, Ramp, Triangle outs
1 x Noise Module - White, High Pass, Low and Grainy out, Random Trigger out
1 x Sample & Hold with Lag - Sample in, CV for Clock Rate, Trigger out, Sync in, CV Out
2 x Ring Mod - 1 x AC Coupled, 1 x DC Coupled
4 Channel AC/DC Mixer/Inverter - Each channel has 3 inputs, Inverted output available
2 x Lag Processor
4 x Buffers (1 in 4 out)
4 x Passive Multiples (4 groups of 5, normalised for 2 groups of 10)
8 x Passive Multiples
1 x +/- 15 volt, 1A PSU - Internally mounted (From a Crumar Stratus, but does the job admirably!)
20 Patch leads to get you going!
One Module is incomplete, which was made for MIDI to CV. The panel and sockets are in place, but no electronics are supplied." See the Broadwave label below for more.
The Baltimore City Paper has a great article on Karl Ekdahl and the Moisturizer. You might remember the Moisturizer from this post featuring video of the device. The following is just an excerpt from the BCP article, be sure to see it for more.
via the BugBrand mailing list:
via Lee
BKcGOJj41!~~_12.JPG)
via this auction
Bottom: System 100M D
via this auction via the forum
DIY synth based on Ray Wilson's MFOS designs. Be sure to see Robosynth for more info.
- Low Frequency Oscillator (LFO) with extensive routing possibilities to the other modules
- 2 Voltage Controlled Amplifiers (VCAs)"
via the Big City Music blog where you'll find more pedals coming from 4ms. See these posts and scroll for video and earlier incarnations of the Triwave Picogenerator.
sample pack via puremagnetik
flickr by Analogue Haven
flickr by Analogue Haven
flickr by Analogue Haven
flickr by jobenbelgium
via this auction
