1uO c - 1u version of Ornament & Crime

Published on Oct 13, 2018 Shay Shezifi

"New design for Ornament and Crime.
Pulp Logic 1u format, 30hp.
DIY only, will be available soon."

The reveberation of time

Published on Jul 2, 2018 Audio Illustrator

Another track from supporting MATRIXSYNTH Member, New Man Studios. Be sure to see "Another Floydian slip"
posted yesterday. The synths used have been updated in the post. "The reveberation of time" above features MI Rings, Moog Mother 32, Pulplogic's spring reverb and a vocal sample to boot.

"Audio illustrator James Newman and the James Newman world orchestra are pleased to present 'The reverberation of time'.

Photo courtesy of Stephanie Newman.

This is my musical portrait of Ecclesiastes 1:2-11.

2“Vanity of vanities,” says the Preacher, “Vanity of vanities! All is vanity.” 3What advantage does man have in all his work Which he does under the sun? 4A generation goes and a generation comes, But the earth remains forever. 5Also, the sun rises and the sun sets; And hastening to its place it rises there again. 6Blowing toward the south, Then turning toward the north, The wind continues swirling along; And on its circular courses the wind returns. 7All the rivers flow into the sea, Yet the sea is not full. To the place where the rivers flow, There they flow again. 8All things are wearisome; Man is not able to tell it. The eye is not satisfied with seeing, Nor is the ear filled with hearing. 9That which has been is that which will be, And that which has been done is that which will be done. So there is nothing new under the sun. 10Is there anything of which one might say, “See this, it is new”? Already it has existed for ages Which were before us. 11There is no remembrance of earlier things; And also of the later things which will occur, There will be for them no remembrance Among those who will come later still.

James Newman 's music can be purchased at: jamesnewman.bandcamp.com

Purchase "The reverberation of time" here:
https://jamesnewman.bandcamp.com/trac...

Planar (Telharmonic, Clouds, TB-03)

Published on Nov 22, 2017 Tape Ghost

"My first video with a new modular I just built. I wanted to build a system that was desktop synth sized and was designed around a specific sound design goal. I wanted something with additive synthesis and that was excellent for drones, textures, and ambiences. The result is a 4U, 42HP system with Mutable Instruments Ears and Clouds, Make Noise Telharmonic as the voice, LXD for filtering and Low Pass Gate enveloping, 2HP VCA for vca duties, and some Pulp Logic tiles for LFOs, Envelops, Attenuation/Offset, and Mixing. The case is from Pulp Logic as well.

The patch in this video has the TB-03 running into the mixer on the modular, and the output of the mixer runs into the input on clouds. The Telharmonic noise out is going into the top LPG on the LXD, and it is being enveloped by the output signal of Ears, then the LXD output is sent to the mixer (thats how i get the snare drum sounds when i tap the case), the P output of the Telharmonic is sent to the other LPG on the LXD and the gate out on the TB-03 sends a gate to the Strike Input of the LXD. That output is then sent into the VCA to be scaled down to the volume level of the TB-03 and then sent into the mixer. The Telharmonic is in the Shift Register Mode, with the TB-03 gate being sent to the D-Gate, and the Degree is being swept by an LFO. There is also an LFO being sent to the Size on the Clouds to prevent Clouds from becoming too resonant. Output goes directly from Clouds stereo out to a Zoom H4N field Recorder. Only limiting was applied in post."

Audulus Eurorack Expert Sleepers ES-8 Demo

Published on Sep 21, 2017 audulus

"In this clip, Audulus is sending both audio and control voltages out through the Expert Sleepers ES-8 from an iPad. The patch is sequencing a bass and lead sound as well as a drum kit. The pad is filtered by the Doepfer SEM VCF and the bass is distorted and mangled by the STG Soundlabs .mix, the Erica Synths Fusion Tube Mixer, the Pulp Logic Spring Reverb 1U tile, and the Rossum Electromusic Evolution VCF.

For more info go to http://www.audulus.com and http//forum.audulus.com"

EKG-demo (Kohinageneraattori)

Published on Feb 26, 2015 Kohinageneraattori

"Analogue Solutions EKG -demo"

Big Ben Mechanical Clock as a Clock Source

Published on Jul 20, 2015 Pulp Logic

"Using a mechanical clock to trigger a Eurorack Lunchbox system. A piezo disc picks up the mechanical vibration from the clock movement. The signal is amplified using a CTACT tile. A pulse is shaped with a comparator in order to drive the Trigger Man sequencer."

Resonator Plate

Published on May 23, 2015 Pulp Logic

"DIY Resonator Plate driven by DRVAC and sensed by CTACT"

Cyclic Skew Introduction

Published on May 12, 2015 Pulp Logic

"The Cyclic-Skew is a basic modulation source in the 1U tile format. It has two modes of operation; Cycle mode and Envelope mode which are set by the toggle switch on the front panel. In cycle mode it operates as a variable shape LFO where you can set the Rate and the Skew. It has similar operation and range as the LFO in the Korg MS-20. Unlike the Korg LFO, the Cyclic Skew has the ability to reset the LFO on an external trigger event.

In Envelope mode the Trigger input produces a single envelope each time it receives a trigger or gate signal. If a new trigger occurs before the envelope completes a reset takes place and the envelope with restart from the bottom of the cycle.

On the back of the tile is a pair of Dip switches for setting the output to either Un-ipolar or Bi-polar and for setting the output level."

Reverberant Mechanical Summer - First Experiments

Published on May 2, 2015 Pulp Logic

"Driving both ends of a reverb tank and extracting the audio from the center of the springs with a piezo disc. The tank is an Accutronics mini tank with 150 Ohm input and 1k5 ohm output. The drive circuit is two constant current amplifiers one feeding each end. The audio is 100% wet out of the piezo amplifier."

Diddley Bow String Excitation using Eurorack

Published on Apr 18, 2015 Pulp Logic

"I added individual piezo pickups and string excitation coils to my two string diddley bow.

Audio Path:
Mag Pickup - Entry Point - R51 - Springray - Tascam Dr-40
Bass String Piezo - CTACT - A-123 - R51 Distortion CV input

Audio Modulation:
Entry Point Falling Env - R51 VCA Input (Compressor)

Excitation Path:
High String Piezo - CTACT - Entry Point (2nd One) - A-121 Band Pass Out - NSL-32 VCA - Drive Tile - 2k turns Coil

Excitation Modulation:
Cyclic Skew - A-121 Freq & NSL-32
Entry Point Falling Env - A-121 Res CV"

601.1 [eurorack volca touchOSC]

Published on Feb 16, 2015 donaldjasoncrunk

"a new configuration for my Erthenvar / Pulp Logic lunchbox synth centered around the WMD Sequential Switch Matrix and Make Noise Phonogene. both are controlled by some custom layouts i made in touchOSC, and MIDI is being transmitted via the MIDI Implant tile.

this rig is really intented to function alongside the Korg Volcas and other similar instruments, with the SSM being very useful for routing clocks and audio between the boxes.

in this patch, a cycling function acts as master clock for the STG Soundlabs .DIV, which the WMD SSM dutifully distributes to the Volcas, Phonogene and back into itself. The XY pad controls CV inputs on the Phonogene while the Korg Volca keys and Monotribe stumble along behind."

iTunes: TouchOSC - Robert FISCHER

Chords: Remember Chord Memory?

Published on Nov 19, 2014 erthenvar

"Auditioning some chord sounds for some hardcore techno using the Erthenvar Patch Chord along with the Pulp Logic Chords expander"

pulp logic monotron-e 4 voice with ring mod

Published on Aug 5, 2014 FSK1138

"pulp logic monotron-e 4 voice with custom moog knobs

clock from 4ms peg
baud rate xvi sequencer
ring mod is make noise moddemix

fx :
delay and phaser via ableton live"

Springray abused by telephone pickup and exciter coil

Published on Jun 9, 2014 Pulp Logic·22 videos

"Telephone pickup coil probing an old laptop into Entry Point - Square Out to Patch Chord. Chords to Springray and Exciter coil."

Traveling with Lunchbox

Published on May 14, 2014 erthenvar·11 videos

"Out and about with a PulpLogic Lunchbox Traveler. The entire rig is battery powered!"

the P-Verb [ PicoVerb to Eurorack conversion ]

Published on Jan 7, 2014 Pulp Logic·22 videos

"It's deep and does not have any voltage controllable parameters but still makes a nice little reverb / effects module."

Korg Volca Beats for audio.

S/H - Pulp Logic vs Toppobrillo

Published on Oct 10, 2013 ourigin·15 videos

"A comparison between the Pulp Logic and Toppobrillo S/H."

Lunchbox Chords

Published on Jan 10, 2013 erthenvar·8 videos

"Erthenvar Patch Chord in a PulpLogic Eurorack Lunchbox along with some Doepfer modules and PulpLogic 1U Tiles. Visit http://erthenvar.com"

Expert Sleepers ES1 Unboxing First Play

Published on Nov 24, 2012 by FSK1138
"motu 828 mk2 direct via silent way STEP LFO
controlling Pittsburgh audio time table clock in
Pittsburgh audio time table clock divider 1x sending clock to MFB SEQ02
MFB SEQ02 ch1 sending cv to monotron-e filter

ch1 expert sleepers es1 silent wayLFO
sending cv to monotron-e v/oct

modded korg ms20 lc is controlling wasp vsti

http://www.expert-sleepers.co.uk/es1.html
http://www.expert-sleepers.co.uk/silentway.html"

Also see: MONOTRON-E eurorack unboxing

Pulplogic Monotron-E Patchable KORG Monotron in Eurorack Format

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

See the seller's other items for more.