MATRIXSYNTH: Wednesday, December 23, 2020

Wednesday, December 23, 2020

Triadex Muse Electronic Yule Log Live Stream


Pittsburgh Modular Synthesizers

"Long form live performance of the elusive Triadex Muse. The sliders will be modified from time to time during the stream. The output of the Muse is a series of dry square waves so effects were added to spice it up. Enjoy!

The Triadex Muse is a sequencer-based synthesizer, produced in 1972, and designed by Edward Fredkin and Marvin Minsky at MIT. It is an algorithmic, deterministic event generator, utilizing early digital integrated circuits to generate an audio output that can sound very musical. It produces a sequence of notes based on the settings of about a dozen different parameters, including four small sliders that control Volume, Tempo, Pitch, and Fine Pitch. Only a few hundred were ever made."

Remember the days of the old schoolyard - Cat Stevens


phamhagov

A little synth spotting with Cat Stevens. Hadn't seen this one before.

Vince Clarke's KORG MS50 Modular Analog Synthesizer Expander



via this auction

"We got this unit from our friend Vince Clarke of Erasure, Yaz, Depeche Mode, etc.
Here's the story behind this particular MS50, as we told it on Instagram when we got this unit in:

JUST IN: Vince Clarke’s (Depeche Mode, Yaz, Erasure, etc) Tone Tweakers serviced Korg MS50. For sale soon (on our website). History: many years ago, Vince swapped us his first MS50 (which needed servicing) for one of our fully serviced MS50s. He hadn't really used it though, so yesterday he asked us if we wanted it. Duh! 馃槀 Although we encouraged him to move it across the studio so he could use it with his vintage MS20, he wasn’t into it, so we snagged it and bagged it. It's still working quite well after all these years, thanks to us servicing it before we delivered it to his old studio in Maine, but we still intend to service it again prior to sale. Vince and Andy Bell are still releasing albums as Erasure. Also check out Vince’s record label Very Records. Use google to find them, since we can’t post links here.

This MS50 was fully disassembled, cleaned, and electronics were completely overhauled, sparing no expense, so it works like new again and is better than the rest. All pots and jacks were cleaned. Replaced some capacitors. Performed a slight power supply modification. Recalibrated. This process required approximately 6 hours of skilled labor. We didn't need to do it since it worked fine when we got it - we WANTED to do it to hopefully extend the life of this beautiful instrument so it outlasts all others of its kind.

If this unit fails to sell for its current price, we may be open to counter-offers… or we may just keep it along with the other MS50 in our studio."

Pollard Industries Syndrum Twin Drum Synthesizer



via this auction

"The synthesizer section was fully serviced and is working perfectly.

The 2 drum pads work fine and will be included in this sale if requested (please remember to request them!). They were built with a layer of foam inside. As with nearly if not all vintage foam of this age that we've seen, this foam is crumbling. The crumbs are coming out the holes in the pads. We would normally want to replace this foam, but there doesn't seem to be an easy way to disassemble the pads and we don't want to risk breaking them, so we're selling them the way they are. As noted above, the pads aren't even needed to use this piece - we've got a Syn Drum Twin in our studio and always use it without them - we trigger it via a Roland TR-808 (which we also have one of we plan to list shortly)."

Sequential Circuits Prophet VS Rack Synthesizer SN 0457 w/ Original Box & New Backlit Display



via this auction

"This unit has been fully serviced and is in perfect working order. We replaced the original display with one that's much easier to read in the light as well as in the dark. Sale includes power cord and Sequential box."

Roland Viintage Jam Session


synthlegends

"Roland TR-808 triggers my Jupiter 6 with two arpeggiated sounds in split mode, the SH-101 and the JUNO-60. I used the delay from Korg DW-8000 for my JP-6 and reverb pedal GFI specular for my SH-101. The JUNO-60 and TR-808 are clean with no FX and processing. I wish you Merry Christmas with this track and thank you so much for supporting my channel. Take care!"

Prophet 5 + Prophet 600 | Matt Chadra


ClavAnother

"Prophet 5 Rev 4 connected to a Prophet 600 (Gligli) Eleven voices of fun, I'm playing six note chords, and I have no idea where the stolen Prophet 5 voice is going - let me know in the comments if you can hear it."

There's a Prophet 5 in the studio again; it was a good day.


ClavAnother

"Although it has been many years since I had to sell my Prophet 10 in order to pay the lawyer for the custody battle, I have pretty consistently missed being able to play it. So today I find myself with the next best thing in the studio. This is just me making sure it functions properly. I will surely be making plenty more recordings."

X-plorations Vol 1 - Patches 97 to 128 - Sequential Prophet X


GEOSynths

"Now available - https://www.geosynths.com/prophetx

Here is the last of 4 Videos, highlighting Patches 97 to 128 of X-plorations Vol 1 for the Sequential Prophet X. I decided to do a Bank for the Prophet X, however I went and Sampled a variety of Oscillators from the Synths that I own, including Moog ONE, Dreadbox Erebus, Moog Sirin, Matriarch and much more.

I've sampled the Oscillators wide open and every Key across a 61 note range and used the Synthesis capabilities of the Prophet X. I have also utilized some of the Factory Content, such as Strings and Choirs for some of the Patches, as well as the on-board Oscillators.

Many Patches are Stacked or Splits, however many use the fantastic Stereo Filter for Evolving pads, Strings, Leads, Bass and so much more."

X-plorations Vol 1 posts by GEOSynths

Korg "Step Up" to SQ-64


Korg

"Join James Sajeva as he demonstrates the capabliites of the new SQ-64 Polyphonic sequencer!"

Crumar Multiman S (The Orchestrator) 1977 Vintage Analog Synth/String Machine HD


Alberto Napolioni

via this auction

Testing a wonderful Crumar Multiman S
Improvisations
Used also by Radiohead

Italian Vintage Synth/String Machine from 1977

HD audio
with effects:
OTO bim delay
OTO bam reverb



And some pics via the auction

This is the one in the video above.

Rare Original ARP 2600 Front Panel Facsimile



via this auction

"We got this with one of the many ARP 2600 synthesizer we have bought, meticulouslty refurbished and future-proofed and resold.

ARP made a 2600 Front Panel Facsimile pad of blank patches where users could draw in their patch settings so they could recreate them later.

This is a big (36" x 21"), thick laminated blank ARP patch panel drawing that's similar if not identical to the image of the front panel in that Facsimile pad. Because it's laminated and a similar ARP piece we have is not, we suspect it was created for teaching purposes for the demonstrator to write settings on using a dry erase marker. There are no signs one would expect of dry erase marker use on the front panel, but we're still hopefully this was more than just a decorative promotional piece. The other alternative is, of course, that this is just a decorative piece of promotional ARP art. Either way, it's pretty cool. Notice the laminate is raised in places.

If anyone has more info about this rare item, please contact us! (Someone already got in touch to let us know we were most likely correct about our assumptions).

Roland 303 not included."

Xmas 2020 via Wolfang Palm


WPalmWT

"Christmas greetings to all my friends"

xmas modular


zack dagoba

"happy Xmas from Benge"

Roland JD-800 Synthesizer (1991) "Nordic Voices" Frohe Weihnachten - Merry Christmas - 小 袪芯卸写械褋褌胁芯屑


RetroSound

"(c)2007-21 by RetroSound
supported by UVI: http://bit.ly/retrosound-uvi

小 袪芯卸写械褋褌胁芯屑!
Frohe Weihnachten!
Merry Christmas!

A crazy year is coming to an end. Many things have changed. Not a good year for artists and people who live from music. It affects me less, but I can feel the effects. I hope that we can leave all of this behind us soon.
And I would like to thank you for your loyalty and for the nice comments.

I wish all my friends here on YouTube a wonderful christmas time, happy holidays and all the best.
Do what you love. 馃幑

all synthesizer sounds: Roland JD-800 Digital Synthesizer (1991)
recording: multi-track, played by hand

I took the pictures in the video at the Finnish Bay near Saint Petersburg in Russia.

RetroSound synthesizer demo videos since january 2007.
All is for free. If you like my work, so can you support me with a donation or a purchase of my synth shirts or music albums. Thank you!

RetroSound Merch Shop: https://teespring.com/de/stores/retro...
RetroSound Home: https://retrosound72.wixsite.com/home"

I think it's (christmas), yamaha rm1x live jam x-mas special


rm1xapm

"Happy Holidays"

Frequency Central Seismograf BD and SD


Frequency Central

"A short Seismograf BD and SD jam, just randomly auditioning some of the drum types, and tuning/distort effects. No real plan!"



"Seismograf is a PIC based drum module featuring coding by Jetroid. There is currently a choice of two PICs which may be used with Seismograf, ‘BD‘ and ‘SD‘. As you might expect, BD contains a range of 8 bass drums, while SD contains a range 8 of snare drums. The drum sounds are 10 bit encodings of some of our favourite electronic kits from yesteryear (see chart below). It is not possible for the user to load their own sounds onto Seismograf PICs, but there is a chance that we may release alternative drum sets as the years roll (!) by.

Select

This knob is used to select one of the 8 sounds to be triggered. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Tune

This knob may be used to detune the drum sound either upwards or downwards. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Distort

This knob may be used to introduce either one of two different types of distortion to your chosen drum sound. When set to the mid position (12 o’clock) no distortion is present. Turning the knob anti-clockwise will cause the sound to be progressively clipped harder, while turning the knob clockwise will cause the sound to be progressively more bitcrushed. This knob has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Secret Sauce

Try running the sawtooth output of an audio rate VCO into Seismograf’s trigger input, then wiggle the Tune knob manually, or apply a control voltage to the Tune input. Wow! What’s happening here then? When I first demo’ed this feature to Jetroid he buffered for a few minutes before performing a cold shutdown, unable to process what was happening to his code. Seismograf is acting kinda like a fliter, right? Well maybe! Probably more akin to oscillator sync really. As the incoming trigger is so fast, Seismograf only gets to play the initial part of it’s waveform, less on high notes, more on low notes. Additionally, there is naturally higher frequency content the higher the note and so forth. Whatever’s going on, we’re sure that you’ll agree that it sounds freaking awesome. More than just a drum module, right?"



"Seismograf is a PIC based drum module featuring coding by Jetroid. There is currently a choice of two PICs which may be used with Seismograf, ‘BD‘ and ‘SD‘. As you might expect, BD contains a range of 8 bass drums, while SD contains a range 8 of snare drums. The drum sounds are 10 bit encodings of some of our favourite electronic kits from yesteryear (see chart below). It is not possible for the user to load their own sounds onto Seismograf PICs, but there is a chance that we may release alternative drum sets as the years roll (!) by.

Select

This knob is used to select one of the 8 sounds to be triggered. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Tune

This knob may be used to detune the drum sound either upwards or downwards. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Distort

This knob may be used to introduce either one of two different types of distortion to your chosen drum sound. When set to the mid position (12 o’clock) no distortion is present. Turning the knob anti-clockwise will cause the sound to be progressively clipped harder, while turning the knob clockwise will cause the sound to be progressively more bitcrushed. This knob has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Secret Sauce

Try running the sawtooth output of an audio rate VCO into Seismograf’s trigger input, then wiggle the Tune knob manually, or apply a control voltage to the Tune input. Wow! What’s happening here then? When I first demo’ed this feature to Jetroid he buffered for a few minutes before performing a cold shutdown, unable to process what was happening to his code. Seismograf is acting kinda like a fliter, right? Well maybe! Probably more akin to oscillator sync really. As the incoming trigger is so fast, Seismograf only gets to play the initial part of it’s waveform, less on high notes, more on low notes. Additionally, there is naturally higher frequency content the higher the note and so forth. Whatever’s going on, we’re sure that you’ll agree that it sounds freaking awesome. More than just a drum module, right?"

(MU) Frequency Central


(MU) Frequency Central feat. Massive Modular Bundle: osc sync, PWM, Keystep histrionics, the works

2 x System X Oscillator
System X Lowpass Filter
System X Dual VCA
System X Dual ADSR

...which together forms our classic MU Massive Modular Bundle!

Well, I was going to program a sequence into the fabulous Arturia Keystep https://www.arturia.com/keystep/overview (accept no imitation), but soon realised that I was having far too much fun just wiggling and jamming out, so I hit record - the rest is history.

The patch is quite interesting, as there are two VCAs available, I've patched sawtooths via VCF and VCA, and pulses directly to the second VCA. There's a negative ADSR output patched to the second VCA, so the PWM'ed sound fades in as the VCF and VCA sound fades out.

As you will already know, these lovely VCOs feature onboard LFOs which I'm making full use of for a bit of vibrato, PWM sweeps, as well as that huge oscillator sync modulation.

Processing is via MU Stasis Leak (off camera) for some huge delay action.

If you have read this far please comment 'Huge Monster!'"



(MU) Frequency Central feat. Little Melody, Raging Bull, System X Oscillator, Stasis Leak and more!

"Finally got around to producing a MU modular video. This one feature the following Frequency Central MU modules:

Wave Runner
Little Melody
System X Envelope
System X Oscillator
Raging Bull
Stasis leak

I'm using the Boss Dr-55 (bottom left) as a master clock only. The clock is patched to Little Melody, System X Envelope, Wave Runner and also Stasis Leak (via a clock divider).

I've set up a little riff on Little Melody which is being played by the System X Oscillator/Raging Bull/System X Envelope synth voice. I'm occasionally toggling between two modes for some variation.

System X Oscillator's sawtooth and pulse waveforms are patched into the audio inputs of Raging Bull. I'm doing some manual tweaking of it's octave rotary switch. There's also a bit of fat creamy PWM going on

To modulate Raging Bull's cutoff, I'm using Wave Runner in it's sample and hold mode to modulate, System X Envelope, the triangle output of System X Oscillator, as well as some manual tweaks and twists.

System X Envelope is patched to Raging Bull's 3rd CV input, thus controlling both VCF cutoff and VCA openess(?!)/closedness(!?).

Stasis Leak is set to long delays, and is synced to the rhythm via a clock divider (off camera).

If you've read this far, please comment 'Fat and creamy'."

NatLife Sounds & Synthmas Sales



Disclaimer: I'm only posting synthmas sales for supporting members of the site as posting everything would overwhelm the site (and me). That said, be sure to see the dealers on the right for any holiday deals as well.

Via https://www.natlifesounds.com:

"NatLife Sounds has announced X-Mass Sales offering 50% off everything, including all new products.

Use coupon: NS_X-Mass2020

The sale includes sounds for: u-he Diva, DUNE 3, FL Studio 20, Korg KingKorg, Korg Krome, Korg Minilogue XD, Korg Prologue, NI Massive X, Europa, Arturia Microfreak, NI Massive, ReDominator, Roland JP-08, Roland Juno, Roland SE-02, Spire, Summit, Peak, Sylenth1, Synthmaster One, TAL-U-No-LX V2, The Legend, Thorn, u-he Hive, u-he Repro, Xfer Serum, Roland JP-8000, Korg iWavestation and Drum Samples.

THNK YOU FOR SUPPORT! AND WISH YOU A GREAT & HEALTHY X-Mass DAYS!!! :)"

Astonishing History of Synthesizers Series

The Light Bulb Is The Origin of The Synthesizer | Astonishing History of Synthesizers EP1
Reverb

"When you think of the birth of the synthesizer, your mind probably recalls people like Bob Moog and Don Buchla. But the real pioneer of synth tech was...Thomas Edison? Watch as we take a closer look into the origin of the modern synthesizer."

The True ARP vs MOOG Lawsuit Story: Astonishing History of Synthesizers EP 2
Reverb

"Anyone with even a casual interest in the history of synthesizers has heard of the titanic struggle that took place in the mid 1970s when all of the companies were infringing on Bob Moog's filter patent. But the real story of what happened with patents and synthesizers in the 1970s is a bit more nuanced than you've probably heard. Watch as we dive into what really happened."

P.S. See the documentaries label below for similar style posts.

See the comments below for a different take.

C.P.E. Bach - Solfeggietto (Synthesized Version)


Digithalis

"Carl Philipp Emanuel Bach (1714-1788) was the most famous musician son of J.S. Bach. He was teacher and composer for key instruments. This piece is well known as a very fluid music, espically for pianists to check their capabilities on keys ;-)

In this version, I arranged 4-Track sounds with the legendary Waldorf Blofeld Synthesizer. Here my used Blofeld preset sounds:
1. B033 - Glockenspiel
2. B035 - Harpsi
3. F126 - Long Wires (Bass)
4. E001 - WideWarmWash (Pad)"

Dom贸wka z Dw贸jk膮 | Pin Park/kinoMANUAL


Polskie Radio

EMS SYNTHIs live.

Dom贸wka z Dw贸jk膮 | Pin Park/kinoMANUAL

Muzyka: Pin Park
Oprawa wizualna: kino Manual

Repertuar:

"Autobahnkirche"
"City"
"Milky Medium"
"Doppelganger"​​

Duet Pin Park tworz膮 Maciej Polak i Maciej B膮czyk – mi艂o艣nicy i znawcy d藕wi臋k贸w syntezatorowych i samych maszyn. Muzycy korzystaj膮 z nietypowej architektury i niepowtarzalnych brzmie艅 syntezator贸w analogowych EMS, wywodz膮cych si臋 z lat 70. Testuj膮 potencja艂 tych instrument贸w i poszerzaj膮 go o do艣wiadczenia wsp贸艂czesnych nurt贸w elektronicznych.

Serdecznie zapraszamy do s艂uchania i ogl膮dania!

Novation Nova Desktop (Laptop) #1 Pads/Strings Sound Demo


Kosmokatze

"Just some of my favorite Patches performed with some Filter sweeps.
No external FX processing.

Still worth in 2020? You decide ;-)"

---
Side note: I remember when the Supernova was first released with the initial crop of virtual analog synths. People said it sounded most like a Roland Jupiter-8. I think you can hear some of that character here.

24.12.20 Serge Modular System


batchas

Anyma Phi: Sequenced using a groovebox & Roli Seaboard Rise 25


Aodyo Instruments

"In this demo, Romain sequences the Anyma Phi using a simple MC-303 groovebox.

All sounds are generated by the Anyma Phi, except for kick provided by the groovebox :
- a plucked string + a VA oscillator (bassline), going into filter, resonator and a little phaser
- a resonator plus delay
- an external input source (kick drum mixed into the Anyma Phi and passed through a filter + resonator)

NB: encoder response to be improved.

Demo and sound design by Romain Bricout.

Anyma Phi blends the classic ingredients of electronic music with physical modeling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal."

Anyma Phi: Played using a Roli Seaboard Rise 25

"In this demo, Romain plays the Anyma Phi using a Roli Seaboard Rise 25, directly plugged into the Anyma Phi USB port. He made a hybrid beefy bass patch made of physical modelling and virtual analog elements (VA oscillator and 24 dB/oct ladder filter).

Demo and sound design by Romain Bricout."

Korg Prophecy Solo Synthesizer (Monophonic Ripper!)



via this auction

"Despite it's quirky appearance, this digital monophonic synth slays! At the dawn of virtual analog this synth catered to the 90's electronica market offering some nice features, even by today's standards. Synth works great and is a ton of fun! AC power cable included.

LFO - 4 LFOs, 30 Waveforms, Real-Time Modulation, 0-60Hz Filter - Voice Filter: Resonant Low/Hi/Band/Notch VCA - 4 envelopes Keyboard - 37 keys (with velocity & aftertouch) Arpeg/Seq - Arpeggiator: Programmable, Sends/Receives MIDI Clock"

Korg Poly-800 MKII 8-Voice Poly Synth



via this auction

"Korg Poly-800 II, awesome sounding 8-voice analog (DCO) poly synth. Easy to use and is a ton of fun, features chord memory and a super lush stereo chorus (Juno killer). Includes non-original power supply and PDF printed manual.

Condition: Volume pot is a tad dirty and bender joystick is missing the tiny control tip, functions well otherwise."

ROLAND SH-09 Analog Synthesizer Keyboard SN 118051



via this auction

ROLAND MKS-80 REV4 Super Jupiter



via this auction

"This is the more desirable rev 4 version of the Super Jupiter. This unit has been fully serviced and is in perfect working order. MPG-80 programmer module available separately."

ROLAND U-220 w/ Original Box SN AB12624





via this auction

Elektor Formant 18-module case + keyboard



via this auction

"Up for sale is an Elektor Formant 18-module case: a big unit with space for 12 modules and a smaller case with space for 6 modules. Two modules are installed: 'kov / gate' and a 'netz (psu)' module. The keyboard is also included, but the cable to connect it with the case isn't there anymore. We sell it as-is, for spares / project. There are some psu boards installed, but it's such a mess inside that we can't say anything about the technical condition.

Cosmetically everything is in used condition. One of the corners of the keyboard is broken, an inlay of a knob of the keyboard interface is missing, there are a few scratches on the keyboard case and keys. The wooden cases have a few scratches and wear and tear. A lot of screws are missing. Please check all the photos before purchase."

Roland Jupiter-6



via this auction

Roland TB-303



via this auction

US $2,977.99

E-MU Emu Systems Emulator III EIII Model 6080 OS2.40 Synth Sampler 07000223



via this auction

MFB-522 Analog Drum Machine Sequencer SN 09073



via this auction

“mfb-522 is a drumcomputer with a fully analogue sound engine that offers plenty of editing capabilities. it includes a step-sequencer with popular tr-style running-light-programming. memory locations are available for 72 patterns as well as for 8 songs. available edit controls: bass drum [decay, tune, tone, level] - the bass drum can be programmed in two different lengths per pattern. it also offers and individual output. snare drum [noise, tone, level] - rimshot [level] - snare drum and rimshot cannot be played simultaneously. however, they can be used in the same pattern. both instruments share the same individual output. clap [attack, filter, decay, level] - the parameters allow setting the width and fullness of the clap sound. this sound also has its proprietary individual output. tom/conga [tune, decay, level] - this sound source can be switched between tom and conga instruments. sounds programming allows setting of three different pitches. cowbell [tune, decay, level] clave [level] - tune for cowbell controls a detune-effect, while the pitch is set commonly with cymbal and hihat. cowbell and clave cannot be played simultaneously. however, they can be used in the same pattern. cymbal [tone, decay, level] - tune sets the pitch for cymbal, cowbell and hihat open/closed hihat [decay, level] - open and closed hihat cannot be played simultaneously. however, they can be used in the same pattern. this sound source offers and individual output. the step-sequencer allows programming of 72 basic patterns plus 72 fill-ins. the latter being associated to the basic pattern memory location, resulting in a two-bar-pattern when using the fill-in. patterns can be combined to eight songs that each hold a user-definable sequence of up to 64 patterns. in addition to the instruments, a global accent-track is available. when set, the corresponding step will be played with a higher or lower volume-setting in comparison to the standard level. the mfb-522's sequencer offers three different steps of shuffling. a stereo output will carry all instruments minus those where individual outputs are in use (bass drum, snare drum/rimshot, claps and hihat). using the midi-in, drum-sounds can be played with a keyboard or external sequencer. here, the sound sources act velocity sensitive. finally, mfb-522 can be synchronized to incoming midi-clock.

Introducing LUMATOUCH. Only on Lumatone Isomorphic Keyboard.


Lumatone Keyboard

"Lumatouch is an experimental mode of expression that allows you to modulate your aftertouch parameter using a key's entire range of motion. To learn more about Lumatone or Lumatouch, visit https://www.lumatone.io."

This Soviet synth is A E S T H E T I C


HAINBACH

"In which I demo the Maestro synthesizer which was made in the Soviet Union in 1986. The brainchild of synth genius Vladimir Kuzmin, it combines digital and analog sound generation in a most hauntingly beautiful way."

Rebel Technology and Befaco Lich


Rebel Technology

"In this video, Cherif Hashizume explains how the module works and what you can do with it. He demos one of the preset patches: Harmonic Lich, and performs a short improvisation with it."

Bioscape v1.1 for the Kontakt Player, updated with 122 new presets


Luftrum1

"Bioscape for the Kontakt Player is updated to v1.1 adding 122 new 'Reverse' themed presets to the factory library. This vid is an audio demo of 20 of the new presets added in the update. The update is free for all existing customers, just update directly in Native Access.

Field recordings merge together in a sonic kaleidoscope of found sound cinematics - from underscoring pads to drones, pulses and textures.

Bioscape is a Kontakt instrument that is based on field recordings and found sounds to create musical content, this gives you an unpolished, raw and organic dimension to your production. Bioscape is particularly suitable for game and filmscore composers, but works extremely well with ambient music, music concr猫te, sound healing, music therapy or just as a standalone experimental instrument with presets created by Simon Stockhausen, Arksun, Luftrum, Sonic Underworld, Claus Gahrn, Empty Vessel, Adam Pietruszko, Echo Season and Triple Spiral Audio."

https://www.luftrum.com/

Adagio For Synths - Xmas edition


thesrabbit

"What makes this a Christmas video? You'll know it when you see it. What's the song? You'll know it when you hear it. Even though I played it wrong.

I just got the Roland Super JX-10 and am waiting for the Vecoven firmware chips to arrive so I can test new changes to the MIDI Mod app. The Super JX has a distinct instant 80's vibe to it that just feels like home. I spent the evening going through the JX-8P stock presets and there are so many great ones. This video features the "High String" preset. I needed to fill out the low end so I made a stringy, yet somewhat brassy patch on the Alpha Juno-2 to do that. I routed aftertouch to the filter for maximum feels. Unfortunately, the aftertouch sensitivity on this Super JX is about as good as the sensitivity on my Juno. It requires a minimum of 80 pounds of pressure just to eek out a MIDI value of 15. It's hours later now and my fingers are still tingling.

Both synths are running into an analog mixer and the aux send is going to the Ventris Dual Reverb with an "E-Dome" setting and then back into the mixer. From there it just goes straight into the audio interface. This is the raw recording. There are no additional effects or post processing."
PREVIOUS PAGE NEXT PAGE HOME



Patch n Tweak

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH