via this auction
Perfect Circuit Audio (RSS)
"A brand new Analog Four, brand new Octatrack and side panel kit to be able to mount and use together live or in the studio!
Save your precious desk space and make your friends jealous :)"
Wednesday, February 13, 2013
Elektron Analog Four & Octatrack DPS-1 Synthesizer Sampler Master Stack
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Perfect Circuit Audio (RSS)
"A brand new Analog Four, brand new Octatrack and side panel kit to be able to mount and use together live or in the studio!
Save your precious desk space and make your friends jealous :)"
via this auction
Perfect Circuit Audio (RSS)
"A brand new Analog Four, brand new Octatrack and side panel kit to be able to mount and use together live or in the studio!
Save your precious desk space and make your friends jealous :)"
Schippmann CS-8 Series VCF-02 Multimode Filter
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"THE solution to all your problems. If you are looking for one filter to rule them all this is the one for you. Definitely a staff favorite here at Perfect Circuit :)
Features
121 different filter modes (27 low pass, 18 high pass, 13 band pass, 63 all pass/notch/phaser settings).
Super warm, crystal clear and very musical sound with a lot of saturation possible.
Input drive-led and output clip-led!
Total remote control of all filter types via control voltage.
4x simultaneous true ring modulation effects (filter tap output x -1/+1 rectangle extraction).
3 new (and never seen before) parameters: emphasis, 2nd harmonic distortion and drop make this filter absolutely unique.
13 cv inputs for filter mode/cutoff frequency/resonance-emphasis/2nd harmonic distortion means lots of control.
2 audio inputs with +20 db gain boost and phase reverse."
via this auction
"THE solution to all your problems. If you are looking for one filter to rule them all this is the one for you. Definitely a staff favorite here at Perfect Circuit :)
Features
121 different filter modes (27 low pass, 18 high pass, 13 band pass, 63 all pass/notch/phaser settings).
Super warm, crystal clear and very musical sound with a lot of saturation possible.
Input drive-led and output clip-led!
Total remote control of all filter types via control voltage.
4x simultaneous true ring modulation effects (filter tap output x -1/+1 rectangle extraction).
3 new (and never seen before) parameters: emphasis, 2nd harmonic distortion and drop make this filter absolutely unique.
13 cv inputs for filter mode/cutoff frequency/resonance-emphasis/2nd harmonic distortion means lots of control.
2 audio inputs with +20 db gain boost and phase reverse."
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Auctions, eurorack, Featured, Schippmann
LABELS/MORE: Auctions, eurorack, Featured, Schippmann
Abstract Data ADE-20 ADE 20 Multimode VCF Module
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Warm, classic sound combined with a modern feature set, built into a low-profile, high-quality 10HP Eurorack module.
Simultaneous, AC-Coupled Low, High, Band and All-Pass Outputs. Wide-ranging Frequency Cutoff and Resonance to self-oscillation.
Feedback Insert for 'stacked' filter types and wild sonic manipulation. Full CV control, on-board Attenuation and dedicated
1V Oct Input. Dedicated Attenuation and Gain of both Audio and Feedback Inputs. Lush pads, tearing leads, deep filter kicks, sound design and more.
The ADE-20 brings classic character to the modern modular.
Features
Controls (Knobs: Left, T-B): Audio In Gain/Atten; Cutoff Freq; Freq CV
Controls (Knobs: Right, T-B): Feedback In Gain/Atten; Res Level; Res CV
Inputs (Audio): 2x AC, Approx. +/-10V Max. (3.5mm)
Inputs (CV): 3x AC/DC, Approx. +/-10V Max. (3.5mm)
Outputs (Audio): 4x AC: Low, High, Band, All Pass (3.5mm)"
via this auction
"Warm, classic sound combined with a modern feature set, built into a low-profile, high-quality 10HP Eurorack module.
Simultaneous, AC-Coupled Low, High, Band and All-Pass Outputs. Wide-ranging Frequency Cutoff and Resonance to self-oscillation.
Feedback Insert for 'stacked' filter types and wild sonic manipulation. Full CV control, on-board Attenuation and dedicated
1V Oct Input. Dedicated Attenuation and Gain of both Audio and Feedback Inputs. Lush pads, tearing leads, deep filter kicks, sound design and more.
The ADE-20 brings classic character to the modern modular.
Features
Controls (Knobs: Left, T-B): Audio In Gain/Atten; Cutoff Freq; Freq CV
Controls (Knobs: Right, T-B): Feedback In Gain/Atten; Res Level; Res CV
Inputs (Audio): 2x AC, Approx. +/-10V Max. (3.5mm)
Inputs (CV): 3x AC/DC, Approx. +/-10V Max. (3.5mm)
Outputs (Audio): 4x AC: Low, High, Band, All Pass (3.5mm)"
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Abstract Data, Auctions, eurorack
LABELS/MORE: Abstract Data, Auctions, eurorack
Abstract Data ADE-10 Reactive Shaper Module
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"The Reactive Shaper can process audio signals and control voltages and consists of three different stages which are set in series. Each section has an individual control and an attenuated CV input. All inputs are DC-coupled i.e. they accept slow CVs.
Stage 1 is a subtle wave shaper producing sounds between PWM and phasing. Nice for adding that PWM touch to waves which can´t be pulse modulated.
Stage 2 is more aggressive as it contains a wave folder which will clip the signal and fold back the clipped part back into the signal. this will "square up" your signal and add harmonics.
Stage 3 is a feedback circuit which will add more and more of output signal to it´s input the more you turn up the level.
As the three stages are set in series stage 1 will affect the behaviour of stage 2 etc. You can use a combination of the stages or use each separately. The ADE-10 works bst with symmetrical non-square signals like sine wave, triangle or sawtooth/ramp.
In addition the module has potentiometers for controlling input and output levels witth a gain or attenuation of 50dB.
Features
1 signal input, DC-coupled, maximal input level +/-10V
3 CV inputs, DC-coupled, max. input level +/-10V
1x DC- full-wave, will pass the entire signal i.e it´s is bipolar
1x DC half-wave, will let through only the positive part of the signal"
via this auction
"The Reactive Shaper can process audio signals and control voltages and consists of three different stages which are set in series. Each section has an individual control and an attenuated CV input. All inputs are DC-coupled i.e. they accept slow CVs.
Stage 1 is a subtle wave shaper producing sounds between PWM and phasing. Nice for adding that PWM touch to waves which can´t be pulse modulated.
Stage 2 is more aggressive as it contains a wave folder which will clip the signal and fold back the clipped part back into the signal. this will "square up" your signal and add harmonics.
Stage 3 is a feedback circuit which will add more and more of output signal to it´s input the more you turn up the level.
As the three stages are set in series stage 1 will affect the behaviour of stage 2 etc. You can use a combination of the stages or use each separately. The ADE-10 works bst with symmetrical non-square signals like sine wave, triangle or sawtooth/ramp.
In addition the module has potentiometers for controlling input and output levels witth a gain or attenuation of 50dB.
Features
1 signal input, DC-coupled, maximal input level +/-10V
3 CV inputs, DC-coupled, max. input level +/-10V
1x DC- full-wave, will pass the entire signal i.e it´s is bipolar
1x DC half-wave, will let through only the positive part of the signal"
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Abstract Data, Auctions, eurorack
LABELS/MORE: Abstract Data, Auctions, eurorack
Manhattan Analog MA35 VCF & VCA Module
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"The MA35 is an internally-coupled VCF and VCA based largely on the back end of the legendary Korg MS-10. The VCF section is based on the classic Korg35 filter architecture, implemented using discrete transistors rather than the original (and impossible to find) proprietary ICs. It is switchable between Lowpass and Highpass modes of operation, which can either be done manually using the toggle switch or with CV via the "mode" jack. There is also a two-channel audio mixer built in to the input. Modular-level signals will overdrive the inputs as you pass ~12:00 on the dial - stay below this threshold for a smooth, liquid sound or push past it for fuzzy screaming mayhem! The VCA section is based on the MS-10's 'single-transistor' design, which adds distinct color to the sound and is an important part of capturing the spirit of the original.
Care has been taken in the selection of period transistors and opamp chips to keep the character of the sound as authentic as possible. This is not a hi-fi module! It's a little raw and a little noisy - in all of the very best ways.
The MA35 is fully protected from reverse power connection. The proper orientation of the ribbon cable is indicated on the top copper layer of the pcb, just below the power header."
via this auction
"The MA35 is an internally-coupled VCF and VCA based largely on the back end of the legendary Korg MS-10. The VCF section is based on the classic Korg35 filter architecture, implemented using discrete transistors rather than the original (and impossible to find) proprietary ICs. It is switchable between Lowpass and Highpass modes of operation, which can either be done manually using the toggle switch or with CV via the "mode" jack. There is also a two-channel audio mixer built in to the input. Modular-level signals will overdrive the inputs as you pass ~12:00 on the dial - stay below this threshold for a smooth, liquid sound or push past it for fuzzy screaming mayhem! The VCA section is based on the MS-10's 'single-transistor' design, which adds distinct color to the sound and is an important part of capturing the spirit of the original.
Care has been taken in the selection of period transistors and opamp chips to keep the character of the sound as authentic as possible. This is not a hi-fi module! It's a little raw and a little noisy - in all of the very best ways.
The MA35 is fully protected from reverse power connection. The proper orientation of the ribbon cable is indicated on the top copper layer of the pcb, just below the power header."
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Auctions, eurorack, Manhattan Analog
LABELS/MORE: Auctions, eurorack, Manhattan Analog
Manhattan Analog Mutinator Trigger Combiner Module
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"The Mutinator is a “human interface module” and can best be described as a multi-channel switched trigger combiner. It features 4 parallel channels, each with two switched inputs and a single output. Within each channel the inputs are combined using analog OR logic and sent to the output, whose activity is indicated by an LED. The operation of the switches is ON-OFF-(ON). In the ON position the corresponding input's signal passes to the combiner. In the OFF setting, that input is muted. The (ON) setting is known as ‘momentary-on’ - In this position the signal will pass to the output, but the switch will return to the OFF posision as soon as you release the switch lever. This allows you to more easily ‘play’ the switches in a performance situation.
Unlike some other trigger-combiner designs, this module contains active circuitry. Incoming pulses are reduced in amplitude by the logic section but an output amplifier compensates for this. In addition, the level of the incoming pulses is limited to protect the module. This means you can run any positive-voltage trigger or gate source in your studio into the inputs without fear of causing damage to the module. This limiter also prevents the Mutinator from producing an output voltage above ~10.2v, which makes the outputs safe for any other modules in your Eurorack modular synthesizer.
Please note that this module is designed to pass trigger and gate information only. It does not faithfully preserve the level of the input signal nor will it pass any voltage below 0v. It will not perform as expected with audio or bipolar control voltage signals."
via this auction
"The Mutinator is a “human interface module” and can best be described as a multi-channel switched trigger combiner. It features 4 parallel channels, each with two switched inputs and a single output. Within each channel the inputs are combined using analog OR logic and sent to the output, whose activity is indicated by an LED. The operation of the switches is ON-OFF-(ON). In the ON position the corresponding input's signal passes to the combiner. In the OFF setting, that input is muted. The (ON) setting is known as ‘momentary-on’ - In this position the signal will pass to the output, but the switch will return to the OFF posision as soon as you release the switch lever. This allows you to more easily ‘play’ the switches in a performance situation.
Unlike some other trigger-combiner designs, this module contains active circuitry. Incoming pulses are reduced in amplitude by the logic section but an output amplifier compensates for this. In addition, the level of the incoming pulses is limited to protect the module. This means you can run any positive-voltage trigger or gate source in your studio into the inputs without fear of causing damage to the module. This limiter also prevents the Mutinator from producing an output voltage above ~10.2v, which makes the outputs safe for any other modules in your Eurorack modular synthesizer.
Please note that this module is designed to pass trigger and gate information only. It does not faithfully preserve the level of the input signal nor will it pass any voltage below 0v. It will not perform as expected with audio or bipolar control voltage signals."
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Auctions, eurorack, Manhattan Analog
LABELS/MORE: Auctions, eurorack, Manhattan Analog
Polivoks with MIDI-interface and without the keyboard Video
Published on Feb 13, 2013 Strangesoundful·9 videos
Studio Electronics Boomstar 5089 by Drew Neumann
Before I Don't Have Anything Left - Studio Electronics Boomstar 5089 by Drew Neumann
Published on Feb 13, 2013
"The very first Boomstar 5089 production unit demo here, or to parrot my favorite hackneyed "Beltway" phrase: "that's out there." 100% natural, except for the third arm. Amazing that this box can make (of all things) FM sounds - listen for 'em @ 00:00:34:17.
Filter title sequence corrected.
An alternative audio take for your unfiltered listening pleasure? Why not.
http://studioelectronics.com/assets/Audio/boomstar/Before-I-Dont-Have-Anything-Left_Alt-Take.mp3
http://studioelectronics.com/assets/Audio/boomstar/Before-I-Dont-Have-Anything-Left_Alt-Take.wav
SoundCloud it: https://soundcloud.com/studio-electronics/before-i-dont-have-anything"
Published on Feb 13, 2013
"The very first Boomstar 5089 production unit demo here, or to parrot my favorite hackneyed "Beltway" phrase: "that's out there." 100% natural, except for the third arm. Amazing that this box can make (of all things) FM sounds - listen for 'em @ 00:00:34:17.
Filter title sequence corrected.
An alternative audio take for your unfiltered listening pleasure? Why not.
http://studioelectronics.com/assets/Audio/boomstar/Before-I-Dont-Have-Anything-Left_Alt-Take.mp3
http://studioelectronics.com/assets/Audio/boomstar/Before-I-Dont-Have-Anything-Left_Alt-Take.wav
SoundCloud it: https://soundcloud.com/studio-electronics/before-i-dont-have-anything"
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Featured, Studio Electronics, Video
LABELS/MORE: Featured, Studio Electronics, Video
Yamaha AN1X Synthesizer
uLKVH,BRFvId16Ww~~60_58.JPG)
Cumulus 1 [WIP] (Glitzerstrahl)
Published on Feb 12, 2013 GlitzerstrahlMusic·4 videos
"The starting point of a track made entirely with my modular rack. No MIDI or external sequencing but reverb was added while recording through Ableton Live.
The track is still being worked on so this video only shows the first version. I'll continuously post videos as parts are added, and that way you can see how the track builds up.
In essence what you hear is built up by an XAOC Moskwa sequencer modulating a Pittsburgh filter cutoff that filters a set of 3 separately tuned Bubblesound VCOb oscillators.
A Pittsburgh mixer is manually manipulated to change the mix of the three oscillators, and the resonance, QVC and cutoff of the filter is also manually tweaked during the course of the track.
The Attack and Release of the envelope (of which there is only 1 (TipTop Z4000)) is set randomly and gated by the Moskwa, and there is a slew limiter (Doepfer a-170) patched in between one of the oscillators, and in the path of the random voltage of the Release of the envelope.
Hope you like it!"
"The starting point of a track made entirely with my modular rack. No MIDI or external sequencing but reverb was added while recording through Ableton Live.
The track is still being worked on so this video only shows the first version. I'll continuously post videos as parts are added, and that way you can see how the track builds up.
In essence what you hear is built up by an XAOC Moskwa sequencer modulating a Pittsburgh filter cutoff that filters a set of 3 separately tuned Bubblesound VCOb oscillators.
A Pittsburgh mixer is manually manipulated to change the mix of the three oscillators, and the resonance, QVC and cutoff of the filter is also manually tweaked during the course of the track.
The Attack and Release of the envelope (of which there is only 1 (TipTop Z4000)) is set randomly and gated by the Moskwa, and there is a slew limiter (Doepfer a-170) patched in between one of the oscillators, and in the path of the random voltage of the Release of the envelope.
Hope you like it!"
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Doepfer, eurorack, Pittsburgh Modular Confluence, TipTop Audio, Video, XAOC Devices
LABELS/MORE: Doepfer, eurorack, Pittsburgh Modular Confluence, TipTop Audio, Video, XAOC Devices
YAMAHA MX49 Music Synthesizer Video Demo
Published on Feb 13, 2013 RobertKarasekGermany·37 videos
"Showing off YAMAHA's latest synthesizer MX49.
This video was made right after delivery & unpacking.
Read my review in OKEY-magazine #112.
==
www.robert-karasek.com"
Yamaha MX49s on eBay
"Showing off YAMAHA's latest synthesizer MX49.
This video was made right after delivery & unpacking.
Read my review in OKEY-magazine #112.
==
www.robert-karasek.com"
Yamaha MX49s on eBay
Frequency moodulation (Doepfer analog modular system)
Published on Feb 13, 2013 GruithuisenCityMan·415 videos
"Hello ! My name is Frederic Gerchambeau. I have made this movie and this music. The music has been made using a Doepfer analog modular system. Enjoy !"
iLectric Piano for iPad
"THE STUDIO QUALITY ELECTRIC PIANO APP: A COLLECTION OF 40 PROFESSIONAL SOUNDING INSTRUMENTS FOR YOUR IPAD
Turn your iPad into the ultimate electric piano instrument with an extraordinary collection of authentic electric pianos and vintage keyboards along with built-in recording! Use the iRig KEYS portable keyboard (www.irigkeys.com) or the iRig MIDI interface (www.irigmidi.com) to connect your external keyboard to your iPad, and you're ready to compose, rehearse, perform and record with the very best instruments for iPad.The sequel to IK's acclaimed iGrand Piano app, iLectric Piano now puts a collector's dream gallery of history's best electric pianos, electric grands and clavinets right at your fingertips with studio-grade quality never before heard in app that stands up to the most powerful virtual instruments available on on a computer.
With high-definition samples across multiple velocities, iLectric Piano brings you the most playable, expressive and authentic sounding electric piano, electric grand and clavinet instruments available on a mobile device that you can play anytime and everywhere. iLectric Piano gives you a collection of 20 world-class electric pianos, electric grands and clavs (including one by registering) along with a capable recorder and metronome. Add the Electric Piano Expansion Pack to add another 20 high-quality instruments.
Record your rehearsals or performances as MIDI with both overdubbing and punch-in capability, then export your track as audio via E-mail of File Sharing or Audio Copy to other iOS apps. With the built-in MIDI Recorder, you can change the tempo of your piece or even choose to use a different piano AFTER you've completed your performance! For composers of any level, the MIDI Recorder lets you capture and develop ideas anywhere your mobile life takes you. iLectric Piano also includes some professional MIDI performances to help you audition the various electric piano instruments or just ignite your own creative muse!
The easy-to-use instrument editor puts real-time controls on the panel just above the keys to let you adjust the EQ, the amount of reverb, the overdrive and your choice of 5 modulation effects (chorus, flanger, phaser, tremolo and auto pan). You can also adjust the tuning and transposition of the instrument. All edit knobs can be assigned to your choice of MIDI controllers for external fine-crafting of your instrument's sonic details. Virtual MIDI and MIDI Program Change are also supported.iLectric Piano features:
- 20 world-class, multi-velocity electric piano, electric grand and clavinet instruments (including one by registering)
- Expandable library of 20 additional studio-grade instruments instantly available via in-app purchase
- Intuitive instrument and effect edit controls including 3-band EQ with sweepable mid, overdrive, reverb and choice of 5 modulation effects (chorus, flanger, phaser, tremolo and autopan) along with tuning and transpose
- Export performances as audio via E-mail, File Sharing and Audio Copy
- Large visual metronome with variable click volume and adjustable tempo
- Virtual MIDI and MIDI Controller and MIDI Program Change support
- Low-latency for real-time playing
- Up to 48-voice polyphony on the latest devices
- Designed to use with with iRig KEYS portable keyboard and iRig MIDI interface
For more information:
www.ikmultimedia.com/ilectric
www.irigkeys.com
www.irigmidi.com"
iTunes:
iLectric Piano for iPad - IK Multimedia
iOS Devices on eBay - Daily Tech Deals
Vangelis - Abraham's Theme (Chariots of Fire) [live]
Published on Sep 17, 2012 Didlybom·29 videos
"Abraham's Theme composed by Vangelis for the legendary Chariots of Fire soundtrack in 1981.
Check out my other Vangelis covers! http://www.youtube.com/playlist?list=...
The instrument is Clavia Nord Stage 2 using a sampled Rhodes Mark I electric piano set to low and a pulse wave virtual-analog waveform oscillator.
Better sound: https://soundcloud.com/didlybom/vange..."
via Olivier Lebra on The MATRIXSYNTH Lounge
"Abraham's Theme composed by Vangelis for the legendary Chariots of Fire soundtrack in 1981.
Check out my other Vangelis covers! http://www.youtube.com/playlist?list=...
The instrument is Clavia Nord Stage 2 using a sampled Rhodes Mark I electric piano set to low and a pulse wave virtual-analog waveform oscillator.
Better sound: https://soundcloud.com/didlybom/vange..."
via Olivier Lebra on The MATRIXSYNTH Lounge
New ADDAC200B 2HP Multiples
via ADDAC
"Our passive multiples allow you to connect one source to an input and have it distributed through all of the adjacent outputs. You get two sets of four connectors.
Yes, it can do both audio and CV!
Features:
2 x 4 jack inputs"
Harvestman Polivoks VCFs
See dealers on the right for pricing and availability on gear.
LABELS/MORE: eurorack, Featured, harvestman
LABELS/MORE: eurorack, Featured, harvestman
Made Them (Roland MV-8800, Korg Microkorg beat)
Published on Feb 13, 2013 esersound1·15 videos
"Another 2 beats with the MV-8800. Samples made with Roland Jupiter 80. Bassline Microkorg.
Enjoy!
Hunart©"
Control Synthesis - Deep Bass Nine DB9 Analog Bass Synthesizer
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Control Synthesis - Deep Bass Nine Synthesizer. Amazing midi controlled analog bass sounds like a TB404!"
via this auction
"Control Synthesis - Deep Bass Nine Synthesizer. Amazing midi controlled analog bass sounds like a TB404!"
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Auctions, Control Synthesis, Featured
LABELS/MORE: Auctions, Control Synthesis, Featured
Modcan CV RECORDER 57a Modular Synthesizer Module
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Cynthia (RSS)
"The CV Recorder 57A module provides a radical new approach to generating modulation and voltage control signals. The implications for this module are extensive when placed in a modular synthesizer context.
Concept:
Combine the ability to record and playback control voltage signal events from standard modules with the tools to shape, mix, loop and time scale these performances in a simple and repeatable manner.
A brief list of possible uses for the 57A:
Create asymmetric LFO shapes from Joysticks or ribbon controller signals
Control panning and VCA parameters for automated mixing
Record long analogue step sequence patterns while changing the step voltages and recording the clock simultaneously for later sync operations
Combine and chain together random voltage patterns with sequences and LFOs on 4 channels
Record envelope shapes and loop them while adjusting the loop start and end points.
Perform granular synthesis type effects on CVs using short loops and sweeping the loop points through the sample under voltage control.
Record lo-fi audio samples and shift playback frequency in real-time.
Plus many more
Features list:
20Hz-20kHz Voltage controlled variable sample/playback rate
with 1V per octave response
4 seconds of quad sampling @20kHz. Greater than 1 hour @20Hz
Quad in/outs with 15 switch selectable channel recording configurations
Record and playback simultaneously
Rehearse mode for pre-recording experiments
Chain multiple samples by recording with different loop points and sample rates.
3 loop modes: Forward, Reverse and Pendulum
Panel and voltage controlled Loop start and End controls
3 Playback modes: One shot, Loop and Hold play
Gate out provides short pulse at loop start
Trigger input for triggering samples when not in loop mode
Status Bi-LED indicates various record and playback states
Channel LEDs indicate arming of channels for recording.
120MHz DSP processor and 4MB of parallel SRAM
Specs:
Sample rate : 20Hz-20kHz (10 Octaves)
Recording Inputs: +/-5V Pk-Pk@100Kohms
Outputs: +/-5V Pk-Pk@1 Kohms
Other inputs 0-5V @100Kohms
Current Requirements: 50mA @ -15V, 200mA @ +15V"
via this auction
Cynthia (RSS)
"The CV Recorder 57A module provides a radical new approach to generating modulation and voltage control signals. The implications for this module are extensive when placed in a modular synthesizer context.
Concept:
Combine the ability to record and playback control voltage signal events from standard modules with the tools to shape, mix, loop and time scale these performances in a simple and repeatable manner.
A brief list of possible uses for the 57A:
Create asymmetric LFO shapes from Joysticks or ribbon controller signalsControl panning and VCA parameters for automated mixing
Record long analogue step sequence patterns while changing the step voltages and recording the clock simultaneously for later sync operations
Combine and chain together random voltage patterns with sequences and LFOs on 4 channels
Record envelope shapes and loop them while adjusting the loop start and end points.
Perform granular synthesis type effects on CVs using short loops and sweeping the loop points through the sample under voltage control.
Record lo-fi audio samples and shift playback frequency in real-time.
Plus many more
Features list:20Hz-20kHz Voltage controlled variable sample/playback rate
with 1V per octave response
4 seconds of quad sampling @20kHz. Greater than 1 hour @20Hz
Quad in/outs with 15 switch selectable channel recording configurations
Record and playback simultaneously
Rehearse mode for pre-recording experiments
Chain multiple samples by recording with different loop points and sample rates.
3 loop modes: Forward, Reverse and Pendulum
Panel and voltage controlled Loop start and End controls
3 Playback modes: One shot, Loop and Hold play
Gate out provides short pulse at loop start
Trigger input for triggering samples when not in loop mode
Status Bi-LED indicates various record and playback states
Channel LEDs indicate arming of channels for recording.
120MHz DSP processor and 4MB of parallel SRAM
Specs:
Sample rate : 20Hz-20kHz (10 Octaves)
Recording Inputs: +/-5V Pk-Pk@100Kohms
Outputs: +/-5V Pk-Pk@1 Kohms
Other inputs 0-5V @100Kohms
Current Requirements: 50mA @ -15V, 200mA @ +15V"
Modcan Dual LFO Modular Synthesizer Module
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Cynthia (RSS)
"Variable slope waveforms
The position of the rise and fall controls
determine the shape of the output
waveforms from triangle to saw
and pulse from 50% to 5% widths
Features
Voltage control of rate
Frequency indicator LED's
Can be used in audio range as
auxiliary oscillator
Multifunction module
Range 2.5kHz down to .0002Hz
(1 cycle =1hr. and 38mins.)
lBnbRsBRG+!1J8b!~~60_57.JPG)
Specifications:
Inputs: 50k ohms
Outputs: 1k ohms
Signal Output: 5 V p-p
Triangle: 0-5V
Saw and pulse: 0-5V
Frequency range .0002Hz-2.5kHz
control sens: 0-5V"
via this auction
Cynthia (RSS)
"Variable slope waveforms
The position of the rise and fall controls
determine the shape of the output
waveforms from triangle to saw
and pulse from 50% to 5% widths
Features
Voltage control of rate
Frequency indicator LED's
Can be used in audio range as
auxiliary oscillator
Multifunction module
Range 2.5kHz down to .0002Hz
(1 cycle =1hr. and 38mins.)
lBnbRsBRG+!1J8b!~~60_57.JPG)
Specifications:Inputs: 50k ohms
Outputs: 1k ohms
Signal Output: 5 V p-p
Triangle: 0-5V
Saw and pulse: 0-5V
Frequency range .0002Hz-2.5kHz
control sens: 0-5V"
Roland Juno106 SN 525783
g~~60_57.JPG)
ROLAND SH-101 SN 574993 Vintage Analog Monophonic Synthesizer
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
tokyowax (RSS)
via this auction
tokyowax (RSS)
KORG POLY-800 SN 008675
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
tokyowax (RSS)
via this auction
tokyowax (RSS)
ARP LITTLE BROTHER SYNTH EXPANDER
4ms JukeSISM
Published on Feb 13, 2013 4mspedals·72 videos
"Little juke/trap beat with one row of modules. 4ms RCD for all the timing, PEG for kick/hat envelope generator, SISM prototype to manage PEG div and curve modulations from RCD gate outputs, Plan B LPG for gates and output mixer, Tiptop Z8000, and Harvestman Piston Honda (original). Offscreen is a static white noise source. Recorded directly from the modular into my crappy little flipcam."
"Little juke/trap beat with one row of modules. 4ms RCD for all the timing, PEG for kick/hat envelope generator, SISM prototype to manage PEG div and curve modulations from RCD gate outputs, Plan B LPG for gates and output mixer, Tiptop Z8000, and Harvestman Piston Honda (original). Offscreen is a static white noise source. Recorded directly from the modular into my crappy little flipcam."
See dealers on the right for pricing and availability on gear.
LABELS/MORE: 4ms, eurorack, Featured, harvestman, Plan b, TipTop Audio, Video
LABELS/MORE: 4ms, eurorack, Featured, harvestman, Plan b, TipTop Audio, Video
Kick.S Live / X668 【Goa Forest】
Published on Feb 13, 2013 KickSenior·232 videos
This song Download =======================
By Link : http://kicks1.bandcamp.com/track/x668-goa-forest
======= Kick.S Music ===============
Blogger : http://electronica-mini.blogspot.jp/2013/01/goa-psychedelic-trance.html
======= Release ===================
・iTunes http://itunes.apple.com/jp/artist/kic...
・Beatport http://www.beatport.com/artist/kick-s/219200
・Bandcamp http://kicks1.bandcamp.com/
・Discogs http://www.discogs.com/digital?artist=Kick+S
・Amazon http://www.amazon.co.jp/s/ref=ntt_src...
Elektron Octatrack und Analog Four Right &Wrong
Published on Feb 13, 2013 dragonworker14·22 videos
"Track with both black Elektron boxes live recorded in Logic"
Elektron on eBay
"Track with both black Elektron boxes live recorded in Logic"
Elektron on eBay
Step Sister prototyping part 2. Now with badass overdrive wave shaping and other bits.
Published on Feb 13, 2013
"For part 1, see here: https://www.youtube.com/watch?v=pWsOy... [posted here]
So i've added a bit to the Step Sister since yesterday that i thought was worth sharing. It now has a waveshaper that squares of the saw wave but also overdrives the input to the filter, yummy. I have also added the Attack and Release controls to the envelope that were mentioned in part 1. This test version is shown running 4 steps for a bit of variety but the finished version will be selectable up to 10 steps. Enjoy.
It should eventually be available to buy from my Etsy and Folksy shop and if its not nightmarishly complicated to build, a kit version too.
http://www.etsy.com/shop/SymetriColour
http://folksy.com/shops/ChrisDodsworthDesign
http://symetricolour.tumblr.com/"
"For part 1, see here: https://www.youtube.com/watch?v=pWsOy... [posted here]
So i've added a bit to the Step Sister since yesterday that i thought was worth sharing. It now has a waveshaper that squares of the saw wave but also overdrives the input to the filter, yummy. I have also added the Attack and Release controls to the envelope that were mentioned in part 1. This test version is shown running 4 steps for a bit of variety but the finished version will be selectable up to 10 steps. Enjoy.
It should eventually be available to buy from my Etsy and Folksy shop and if its not nightmarishly complicated to build, a kit version too.
http://www.etsy.com/shop/SymetriColour
http://folksy.com/shops/ChrisDodsworthDesign
http://symetricolour.tumblr.com/"
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Breadboard, ChrisLody, DIY, Video
LABELS/MORE: Breadboard, ChrisLody, DIY, Video
E Theremin -- Electro Theremin
Published on Feb 13, 2013
http://apps4idevices.com/read/e-theremin-electro-theremin
"I'm sure that you think that E Theremin is a theremin... It seems to be a mix between a monophonic synthesizer with 3 oscillators (osc2 unison), 4 waveforms and an Ondes Martellot... E Theremin is a little bit too minimal... A good little App with a very good sound quality."
iTunes:
E Theremin – Electro Theremin - DesignByPaul
iOS Devices on eBay - Daily Tech Deals
http://apps4idevices.com/read/e-theremin-electro-theremin
"I'm sure that you think that E Theremin is a theremin... It seems to be a mix between a monophonic synthesizer with 3 oscillators (osc2 unison), 4 waveforms and an Ondes Martellot... E Theremin is a little bit too minimal... A good little App with a very good sound quality."
iTunes:
E Theremin – Electro Theremin - DesignByPaul
iOS Devices on eBay - Daily Tech Deals
Grendel Formant Filter - Voltage Language
Published on Feb 13, 2013 EA78751·42 videos
http://ericarcher.net/devices/gff/
"Demonstrating synthesis of vowel sounds using the Grendel Formant Filter Eurorack module. This 100% analog filter allows voltage-controlled selection of English vowels from a 2-dimensional map. The map corresponds to the International Phonetic Alphabet vowel chart, a.k.a. the vowel trapezium.
In this video, an analog joystick with X and Y CV outputs is used to control the filter module. Two channels of MIDI-CV converter may also be used. The module is designed to accept CV sources with 5 volt range. Either -2.5 .. +2.5 volts or 0.. +5 volts can be used for optimum control. Wider CV ranges (up to +/- 10V) will not cause damage, but should be attenuated for best articulation.
Visualizations were made with a Tektronix TDS 350 digital oscilloscope in XY display mode, 1 volt per division.
The Grendel Formant Filter is made by Rare Waves (Austin TX)"
http://ericarcher.net/devices/gff/
"Demonstrating synthesis of vowel sounds using the Grendel Formant Filter Eurorack module. This 100% analog filter allows voltage-controlled selection of English vowels from a 2-dimensional map. The map corresponds to the International Phonetic Alphabet vowel chart, a.k.a. the vowel trapezium.
In this video, an analog joystick with X and Y CV outputs is used to control the filter module. Two channels of MIDI-CV converter may also be used. The module is designed to accept CV sources with 5 volt range. Either -2.5 .. +2.5 volts or 0.. +5 volts can be used for optimum control. Wider CV ranges (up to +/- 10V) will not cause damage, but should be attenuated for best articulation.
Visualizations were made with a Tektronix TDS 350 digital oscilloscope in XY display mode, 1 volt per division.
The Grendel Formant Filter is made by Rare Waves (Austin TX)"
See dealers on the right for pricing and availability on gear.
LABELS/MORE: eric archer, eurorack, Featured, Grendel, Video
LABELS/MORE: eric archer, eurorack, Featured, Grendel, Video
Roland JX3P & TR 505 + Arduino step sequencer + EH Echo #1
Published on Apr 19, 2012 Jaap Lous·2 videos
"A homebrew Arduino step sequencer clocked by a TR 505.
The synth is a Roland JX3P playing through an Electro harmonix Echo #1 digital delay.
I'm still working on the step sequencer. It still needs some step indicator LED's ...
Name that tune for extra credit :-D"
Arduino + TR505 + Meeblip Micro
Published on Apr 13, 2012 Jaap Lous·2 videos
"A Meeblip Micro driven by a homebrew Arduino step sequencer that is clock synced with a TR 505.
Experimenting with MIDI i/o for Arduino (no "MIDI shield" used).
The tiny DIY breakout board with the white IC is the opto-isolator receiving serial from the TR 505.
The pattern was created earlier and saved to the Arduino's EEPROM. Name that tune for extra credit ;-)"
"A homebrew Arduino step sequencer clocked by a TR 505.
The synth is a Roland JX3P playing through an Electro harmonix Echo #1 digital delay.
I'm still working on the step sequencer. It still needs some step indicator LED's ...
Name that tune for extra credit :-D"
Arduino + TR505 + Meeblip Micro
Published on Apr 13, 2012 Jaap Lous·2 videos
"A Meeblip Micro driven by a homebrew Arduino step sequencer that is clock synced with a TR 505.
Experimenting with MIDI i/o for Arduino (no "MIDI shield" used).
The tiny DIY breakout board with the white IC is the opto-isolator receiving serial from the TR 505.
The pattern was created earlier and saved to the Arduino's EEPROM. Name that tune for extra credit ;-)"
Da-saz and Namrata Pamnani @live room......@new delhi 2013 Shivnakaun Studios
Da-saz and Namrata Pamnani @live room......@new delhi 2013 Shivnakaun Studios from DA-SAZ on Vimeo.
Ekdahl Moisturizer, Chimera BC6, vtol, iPad & more. I'm guessing a couple of BugBrand Weevils.
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Art Installations, BugBrand, Chimera, Ekdahl, Featured, iOS, Synth Chicks, Video
LABELS/MORE: Art Installations, BugBrand, Chimera, Ekdahl, Featured, iOS, Synth Chicks, Video
les rockets
Published on Feb 8, 2013 MrMojomc·114 videos
Moog Minimoog & Fender Rhodes. Western space surf rock.
Moog Minimoog & Fender Rhodes. Western space surf rock.
Alek Stark Live at Specka - Femur June 2012 & Learning the Elektron 4
Published on Jul 11, 2012
Alek Stark Live Show at Specka, Madrid. June 2012
You can find Alek Stark's latest release The Shadow Influence on Bandcamp & featured on MATRIXSYNTH-C.
V V V
Synth spotting:
Oberheim Xpander XP1
Dotcom 44 + Cynthia Zeroscillator + Q960
Roland TR-808
Roland SH-101R
Roland VP-330 Super Vocoder
Korg Mono/Poly
Akai MPC4000 Plus
Nord Micro Modular
Ensoniq DP-4
Mackie VLZ 1604
And something more minimal (how it all starts):
Alek Stark at work
Published on Feb 5, 2013
"Working on the new live show and learning about the Elektron A4
V V V
Dotcom 44 + Cynthia Zeroscillator + Q960 connected directly to DP4: first sound in random mode
Elektron A4: Bassline and CH
Nord Wave: Background Voices
VP 330: Background Choirs
Oberheim Xpander: Pad
TR 808: Rim Shot - Second CH - Snare Drum
MPC4000: addicional percussion
Special Guest Star: Gakken Galaxy Invader 1000"
Alek Stark Live Show at Specka, Madrid. June 2012
You can find Alek Stark's latest release The Shadow Influence on Bandcamp & featured on MATRIXSYNTH-C.
V V V
Synth spotting:
Oberheim Xpander XP1
Dotcom 44 + Cynthia Zeroscillator + Q960
Roland TR-808
Roland SH-101R
Roland VP-330 Super Vocoder
Korg Mono/Poly
Akai MPC4000 Plus
Nord Micro Modular
Ensoniq DP-4
Mackie VLZ 1604
And something more minimal (how it all starts):
Alek Stark at work
Published on Feb 5, 2013
"Working on the new live show and learning about the Elektron A4
V V V
Dotcom 44 + Cynthia Zeroscillator + Q960 connected directly to DP4: first sound in random mode
Elektron A4: Bassline and CH
Nord Wave: Background Voices
VP 330: Background Choirs
Oberheim Xpander: Pad
TR 808: Rim Shot - Second CH - Snare Drum
MPC4000: addicional percussion
Special Guest Star: Gakken Galaxy Invader 1000"
Tuesday, February 12, 2013
Division 6 Mattson Mini Modular SQ816 Main Board
via Mattson Mini Modular on Facebook
First machine P&P SQ816 board.
http://division-6.com
http://mattsonminimodular.com
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Division 6, Featured, MMM, synth guts
LABELS/MORE: Division 6, Featured, MMM, synth guts
FULL SET FORMANTA UDS RARE VINTAGE ANALOG SOVIET USSR DRUM MACHINE
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
mechanical animals
"THIS SET INCLUDES FULL SET FORMANTA UDS DRUM MACHINE | DRUM SYNTHESIZER, WITH ORIGINAL PADS | STANDS | CORDS | KEYTAR | DRUM STICKS | PEDALS | ETC - EVERYTHING, WHICH ORIGINALLY CAME WITH THIS SET, ALL IN ORIGINAL CASES"
via this auction
mechanical animals
"THIS SET INCLUDES FULL SET FORMANTA UDS DRUM MACHINE | DRUM SYNTHESIZER, WITH ORIGINAL PADS | STANDS | CORDS | KEYTAR | DRUM STICKS | PEDALS | ETC - EVERYTHING, WHICH ORIGINALLY CAME WITH THIS SET, ALL IN ORIGINAL CASES"
PongFu - Sunpilot Raydeo
Published on Feb 12, 2013 PongFuTube·37 videos
"Elektron Monomachine, DSI Tetra, Tenori-on, Eventide space
Spilling their guts.
No overdubs, one take
Warpzone-Camera focusing on some dust on the lens.
Like it always does actually."
"Elektron Monomachine, DSI Tetra, Tenori-on, Eventide space
Spilling their guts.
No overdubs, one take
Warpzone-Camera focusing on some dust on the lens.
Like it always does actually."
ELKA Rhapsody 610 SN 1011
Yamaha CS-70M Analog Synthesizer SN 1637
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Some pics of the inside. Check out the size and angle of the voice boards.
via this auction
Some pics of the inside. Check out the size and angle of the voice boards.
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Auctions, synth guts, Yamaha
LABELS/MORE: Auctions, synth guts, Yamaha
MFB MICROZWERG
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"multimode filters its own distinctive sound structure. Moreover, the MICRO MINIATURE with its many patch points well equipped to be controlled by the flexible step sequencer URZWERG to be and interact with the multifunctional MEGAZWERG.
In single mode, the MICRO MINIATURE produce with its dual-oscillator and the dual multimode filters not only typical analog bass and lead sounds, but also for a monophonic synthesizer sounds unusual. With fast connections created a patch can be transformed and signal modulations in order to reproduce the sound potential of the MICRO DWARF.
In conjunction with the other synths of DWARF-family or a modular system to grow the capabilities of the MICRO MINIATURE further.
Here is an overview of the areas of the MICRO DWARF:
The two oscillators include the four waveforms triangle, sawtooth, square and spike. VCO 2 instead of the spike has a noise generator. VCO 2 can be tuned an octave plus minus compared to VCO 1. A patch compound, the oscillators sync with each other. In addition, the signal can be picked separately from VCO 2 are used to filter modulation. A ring modulation is combined with the MEGAZWERG possible from which the RM signal can be fed back into the MICRO DWARF.
The two 12-dB variable-state, multi-mode filters have the mode low pass, band pass and high pass and notch (band-stop). The filters are serially connected, resulting in the same mode, a larger edge steepness. This value is variable, as the two cutoff frequencies can be moved via the Space controls against each other. With the combination of low-and high-pass results in a bandpass filter with variable width and separately controllable resonance. A patch connection, a parallel connection of the filter is possible. Then two offset bandpasses, a notch filter with a variable width, or a low-or high-pass filter can be realized with projecting bandpass. The response can be controlled for both filters to self-oscillation. The cutoff frequencies are controlled or jointly controlled by envelope. You can also move through the Space controls against each other. The modulation via LFO or the Mod input either affects filter 1 or both filters together.
Key Follow for a pitch-dependent opening of the filter can be produced by a simple patch connecting the key to CV Contour Mod or input.
Since both filters have separate inputs and outputs, the MICRO MINIATURE be used as a versatile dual-filter box for external audio signals.
The ADSR envelope is internally connected to the cutoff frequency of the filter. If a second ADSR envelope required, it can be from MEGAZWERG or a modular system patched to the MICRO DWARF.
The LFOs have four waveforms and a one-shot function. The selected waveform goes through after the gate pulse of the incoming note only one cycle and thus can be considered a simple envelope, about the pitch or the VCA can be used. LFO 2 has also a sample & hold mode.
There are connections to the internal modulation LFO to cutoff frequency, and the pitch of the oscillators or pulse width of the second VCO The speed of LFO 2 can be modulated over a CV input. Even so, the frequency of LFO 2 increase by a factor of 30 and reduce, so hereby extremely fast or slow modulations are possible.
The control signals of the envelope and the LFO can also be output and therefore can control functions of other analog synthesizers and modular systems.
The signaling pathway VCOs-VCF1/VCF2-VCA and conventional modulations are pre-wired internally. The MICRO MINIATURE thus can be played directly. All other connections are made using the patch sockets and can be operated on MICRO MINIATURE itself and from external devices are controlled or used.
About the MIDI input can be driven to the MICRO DWARF with a Keyboard or a DAW. In addition to the note data, data from the pitch wheel (+ / - 2 semitones) processes and the modulation wheel to control the cutoff frequency.
The MICRO DWARF has the dimensions 190 x 150 mm x 50.
Power is supplied via the included AC adapter."
via this auction
"multimode filters its own distinctive sound structure. Moreover, the MICRO MINIATURE with its many patch points well equipped to be controlled by the flexible step sequencer URZWERG to be and interact with the multifunctional MEGAZWERG.
In single mode, the MICRO MINIATURE produce with its dual-oscillator and the dual multimode filters not only typical analog bass and lead sounds, but also for a monophonic synthesizer sounds unusual. With fast connections created a patch can be transformed and signal modulations in order to reproduce the sound potential of the MICRO DWARF.
In conjunction with the other synths of DWARF-family or a modular system to grow the capabilities of the MICRO MINIATURE further.
Here is an overview of the areas of the MICRO DWARF:
The two oscillators include the four waveforms triangle, sawtooth, square and spike. VCO 2 instead of the spike has a noise generator. VCO 2 can be tuned an octave plus minus compared to VCO 1. A patch compound, the oscillators sync with each other. In addition, the signal can be picked separately from VCO 2 are used to filter modulation. A ring modulation is combined with the MEGAZWERG possible from which the RM signal can be fed back into the MICRO DWARF.
The two 12-dB variable-state, multi-mode filters have the mode low pass, band pass and high pass and notch (band-stop). The filters are serially connected, resulting in the same mode, a larger edge steepness. This value is variable, as the two cutoff frequencies can be moved via the Space controls against each other. With the combination of low-and high-pass results in a bandpass filter with variable width and separately controllable resonance. A patch connection, a parallel connection of the filter is possible. Then two offset bandpasses, a notch filter with a variable width, or a low-or high-pass filter can be realized with projecting bandpass. The response can be controlled for both filters to self-oscillation. The cutoff frequencies are controlled or jointly controlled by envelope. You can also move through the Space controls against each other. The modulation via LFO or the Mod input either affects filter 1 or both filters together.
Key Follow for a pitch-dependent opening of the filter can be produced by a simple patch connecting the key to CV Contour Mod or input.
Since both filters have separate inputs and outputs, the MICRO MINIATURE be used as a versatile dual-filter box for external audio signals.
The ADSR envelope is internally connected to the cutoff frequency of the filter. If a second ADSR envelope required, it can be from MEGAZWERG or a modular system patched to the MICRO DWARF.
The LFOs have four waveforms and a one-shot function. The selected waveform goes through after the gate pulse of the incoming note only one cycle and thus can be considered a simple envelope, about the pitch or the VCA can be used. LFO 2 has also a sample & hold mode.
There are connections to the internal modulation LFO to cutoff frequency, and the pitch of the oscillators or pulse width of the second VCO The speed of LFO 2 can be modulated over a CV input. Even so, the frequency of LFO 2 increase by a factor of 30 and reduce, so hereby extremely fast or slow modulations are possible.
The control signals of the envelope and the LFO can also be output and therefore can control functions of other analog synthesizers and modular systems.
The signaling pathway VCOs-VCF1/VCF2-VCA and conventional modulations are pre-wired internally. The MICRO MINIATURE thus can be played directly. All other connections are made using the patch sockets and can be operated on MICRO MINIATURE itself and from external devices are controlled or used.
About the MIDI input can be driven to the MICRO DWARF with a Keyboard or a DAW. In addition to the note data, data from the pitch wheel (+ / - 2 semitones) processes and the modulation wheel to control the cutoff frequency.
The MICRO DWARF has the dimensions 190 x 150 mm x 50.
Power is supplied via the included AC adapter."
TWO ROLAND TR909's
Published on Feb 12, 2013 thevco·55 videos
"version rom 1 version rom 4"
"version rom 1 version rom 4"
grendel graph wash
Published on Feb 12, 2013 Ebotronix·586 videos
4 ms Peg RCD VCA Matrix
Analogue Systems RS 100 RS 110 RS 360
Arp Odyssey 2811 noise
Bananalogue Serge VCS
Cyndustries TZO
Doepfer A 134 panning by A 143-9 & Moog MP201
Flame Chord Machine
foh choices
Grendel Formant Filter
Make Noise Brains PP Maths Moddemix Optomix QMMG René Wogglebug
Malekko 4x Anti 4x Unkle & Jag
Moog 4x freqbox CP251
Roland System 104 Sequencer
SSL Modulation Orgy
Tiptop Audio Z 8000
Toppobrillo Quantimator Sportmodulator TWF
Logic Master clock to Kenton Pro 2000 II
FX Boss VF1 Line6 Echopro TC M3000
Pinball Pianola Synth
Pinball Pianola from Lucas Abela on Vimeo.
From the makers of The Vinyl Rally
See dealers on the right for pricing and availability on gear.
LABELS/MORE: DIY, exclusive, Featured, mechanical, Synth Chicks, Video
LABELS/MORE: DIY, exclusive, Featured, mechanical, Synth Chicks, Video
Foundations of Synthesis Series by The Bob Moog Foundation
Published on Feb 11, 2013 moogfoundation·82 videos
Featuring Marc Doty, aka AutomaticGainsay
http://moogfoundation.org
Playlist:
1. The Synthesis of Synthesis - "This is the introductory video for the Bob Moog Foundation/macProVideo series "The Foundation of Synthesis." In it, Marc Doty sets the stage for the intent of these videos, which is an integrative instruction which not only describes synthesizer function and operation, but also gives a historical foundation for the functionalities and their implementation."
2. The Synthesis of Synthesis- Sound - "No instruction in synthesis would be complete without some explanation of the physics of sound! This video is one of several videos which outline the physical principles upon which synthesis is based."
3. The Synthesis of Synthesis- The Hammond Novachord - "The progression of devices which led to the modern synthesizer is diverse and interesting. The Foundation of Synthesis covers a number of them which portray a progressive development. One of these synthesizer precursors was the Hammond Novachord, a tube- based keyboard device whose groundbreaking technology is still present in some synthesizers today. More than most, this proto-synthesizer resembled what we came to think of as the modern synthesizer."
4. Foundation of Synthesis- Oscillator Introduction - "The Foundation of Synthesis dives into synthesizer technology with the Oscillator— the origin of sound in synthesis! Marc leads us through the history of this device from its beginning— as a lightbulb!— to its implementation in electronic musical instruments."
5. Oscillators- Pulse Width Modulation - "Pulse Width Modulation is a pleasing aural effect generated by the voltage-controlled adjustment of the width of a square wave. In this Foundation of Synthesis video, Marc demonstrates this function on several classic synthesizers. The video includes an oscilloscope, which shows you exactly what is happening when the width of the square wave output of the oscillator is changed!"
6. Filter- Introduction - "In this part of the 3rd Tutorial of the Foundation of Synthesis, Marc outlines the history of the filter from its origin in the telephone to its application in electronic devices in order to give a firm understanding of how the filter came to be an important part of modern synthesizers. The filter is a function which removes harmonics from a sound. Since harmonics define the timbre of the sound, this is a fast and easy way to create new timbres."
7. Filter- Cutoff Control - "Adjustment of the cutoff point of the filter is such a popular process that it has spawned whole genres of music. In this video, Marc shows the sound and functionality of this particular aspect of the most popular module in the modern synthesizer."
8. Filter-Voyager Serial Resonance - "The Moog Voyager design of Bob Moog includes some unique and useful functionalities. In this video, Marc explores the dual-filter nature of the Moog Voyager by demonstrating some unique ways to apply its filter arrangement."
9. Control Voltage Explanation Part 1 - "For the average musician, control voltage is an abstract concept. Of all the aspects of synthesis, it seems to be the most confusing. In this video, Marc gives a straight-forward and easy-to-understand description of the functionality using concrete examples. With a firm grasp of control voltage, synthesis becomes considerably easier and fun!"
10. Control Voltage Explanation Part 2 - "Here is part two of a video where Marc gives a straight-forward and easy-to-understand description of the process and application of control voltage. With a firm grasp of control voltage, synthesis becomes considerably easier and fun!"
11. The Amp Introduction - "In this video, Marc gives us a basic history of what can be the least-exciting module in the modern synthesizer, but then goes on to show what can be done when this module includes a fair amount of functionality. The Amp is the last step in the synthesis process, and can give you a variety of power over the timbre you create!"
12. The ARP Envelope Follower - "The Envelope Follower is one of the most fun control functions to exist. It takes the amplitude of a given signal and converts it to a voltage. As the amplitude rises, the control voltage rises. This can be used to control any function in the synthesizer which can be controlled via control voltage... which, in an analog synth, is most of them! In this video, Marc gives a demonstration of this under-implemented synthesizer function using the ARP 2600."
13. Designing Timbres- Introduction - "This video introduces the "Designing Timbres" tutorial by explaining exactly what is going to happen within it. It features some of the music and synthesizers used in the rest of the tutorial."
14. Designing Timbres: Major/Minor Chord - "'It doesn't play chords!' -This is the complaint most heard in regard to monophonic analog synthesizers... but wait... if you have three oscillators and some awesome functionality like the Moog Voyager, there is an answer to this complaint. In this video, Marc shows you how you can generate a sort of controllable polyphony using the monophonic Moog Voyager!"
15. Designing Timbres: Duality - "In this video, Marc demonstrates the the functional benefit of a synthesizer like the Yamaha CS-15, which is essentially two different synthesizers stacked together. By altering settings in each division, interesting timbres can be created."
Featuring Marc Doty, aka AutomaticGainsay
http://moogfoundation.org
Playlist:
1. The Synthesis of Synthesis - "This is the introductory video for the Bob Moog Foundation/macProVideo series "The Foundation of Synthesis." In it, Marc Doty sets the stage for the intent of these videos, which is an integrative instruction which not only describes synthesizer function and operation, but also gives a historical foundation for the functionalities and their implementation."
2. The Synthesis of Synthesis- Sound - "No instruction in synthesis would be complete without some explanation of the physics of sound! This video is one of several videos which outline the physical principles upon which synthesis is based."
3. The Synthesis of Synthesis- The Hammond Novachord - "The progression of devices which led to the modern synthesizer is diverse and interesting. The Foundation of Synthesis covers a number of them which portray a progressive development. One of these synthesizer precursors was the Hammond Novachord, a tube- based keyboard device whose groundbreaking technology is still present in some synthesizers today. More than most, this proto-synthesizer resembled what we came to think of as the modern synthesizer."
4. Foundation of Synthesis- Oscillator Introduction - "The Foundation of Synthesis dives into synthesizer technology with the Oscillator— the origin of sound in synthesis! Marc leads us through the history of this device from its beginning— as a lightbulb!— to its implementation in electronic musical instruments."
5. Oscillators- Pulse Width Modulation - "Pulse Width Modulation is a pleasing aural effect generated by the voltage-controlled adjustment of the width of a square wave. In this Foundation of Synthesis video, Marc demonstrates this function on several classic synthesizers. The video includes an oscilloscope, which shows you exactly what is happening when the width of the square wave output of the oscillator is changed!"
6. Filter- Introduction - "In this part of the 3rd Tutorial of the Foundation of Synthesis, Marc outlines the history of the filter from its origin in the telephone to its application in electronic devices in order to give a firm understanding of how the filter came to be an important part of modern synthesizers. The filter is a function which removes harmonics from a sound. Since harmonics define the timbre of the sound, this is a fast and easy way to create new timbres."
7. Filter- Cutoff Control - "Adjustment of the cutoff point of the filter is such a popular process that it has spawned whole genres of music. In this video, Marc shows the sound and functionality of this particular aspect of the most popular module in the modern synthesizer."
8. Filter-Voyager Serial Resonance - "The Moog Voyager design of Bob Moog includes some unique and useful functionalities. In this video, Marc explores the dual-filter nature of the Moog Voyager by demonstrating some unique ways to apply its filter arrangement."
9. Control Voltage Explanation Part 1 - "For the average musician, control voltage is an abstract concept. Of all the aspects of synthesis, it seems to be the most confusing. In this video, Marc gives a straight-forward and easy-to-understand description of the functionality using concrete examples. With a firm grasp of control voltage, synthesis becomes considerably easier and fun!"
10. Control Voltage Explanation Part 2 - "Here is part two of a video where Marc gives a straight-forward and easy-to-understand description of the process and application of control voltage. With a firm grasp of control voltage, synthesis becomes considerably easier and fun!"
11. The Amp Introduction - "In this video, Marc gives us a basic history of what can be the least-exciting module in the modern synthesizer, but then goes on to show what can be done when this module includes a fair amount of functionality. The Amp is the last step in the synthesis process, and can give you a variety of power over the timbre you create!"
12. The ARP Envelope Follower - "The Envelope Follower is one of the most fun control functions to exist. It takes the amplitude of a given signal and converts it to a voltage. As the amplitude rises, the control voltage rises. This can be used to control any function in the synthesizer which can be controlled via control voltage... which, in an analog synth, is most of them! In this video, Marc gives a demonstration of this under-implemented synthesizer function using the ARP 2600."
13. Designing Timbres- Introduction - "This video introduces the "Designing Timbres" tutorial by explaining exactly what is going to happen within it. It features some of the music and synthesizers used in the rest of the tutorial."
14. Designing Timbres: Major/Minor Chord - "'It doesn't play chords!' -This is the complaint most heard in regard to monophonic analog synthesizers... but wait... if you have three oscillators and some awesome functionality like the Moog Voyager, there is an answer to this complaint. In this video, Marc shows you how you can generate a sort of controllable polyphony using the monophonic Moog Voyager!"
15. Designing Timbres: Duality - "In this video, Marc demonstrates the the functional benefit of a synthesizer like the Yamaha CS-15, which is essentially two different synthesizers stacked together. By altering settings in each division, interesting timbres can be created."
See dealers on the right for pricing and availability on gear.
LABELS/MORE: BMF, Featured, Hammond, MOOG, synth tutorials, Synth TV and Film, Video
LABELS/MORE: BMF, Featured, Hammond, MOOG, synth tutorials, Synth TV and Film, Video
Solvent - Themogene (I Dream Of Wires theme)
'I Dream of Wires' is an upcoming, independent documentary film about the phenomenal resurgence of the modular synthesizer — exploring the passions, obsessions and dreams of people who have dedicated part of their lives to this esoteric electronic music machine. Written and directed by Robert Fantinatto, with Jason Amm (Ghostly International recording artist Solvent) serving as producer and co-writer, I Dream Of Wires is set to premiere spring 2013.
idreamofwires.org
"Themogene" features in this brand new official trailer for "I Dream Of Wires: Hardcore Edition" - a limited edition, 4-hour cut available to pre-order now on BluRay / 2xDVD.
Jean Michel Jarre POPCORN (Dance version) My cover
Published on Feb 12, 2013 starshipfive·8 videos
"No copyright infringement intended.
Used for the purpose of criticism and education
Sequenced parts sequenced on Cubase 5, then audio mixdown passed to Roland SP-404
Live parts played on:
Main Lead: Roland V-Synth version 2
Lead 2: Yamaha AN1x
Pads: Yamaha FS1r trigged by Korg T3ex, Kurzweil PC3"
via Michel Fernandes on The MATRIXSYNTH Lounge
"No copyright infringement intended.
Used for the purpose of criticism and education
Sequenced parts sequenced on Cubase 5, then audio mixdown passed to Roland SP-404
Live parts played on:
Main Lead: Roland V-Synth version 2
Lead 2: Yamaha AN1x
Pads: Yamaha FS1r trigged by Korg T3ex, Kurzweil PC3"
via Michel Fernandes on The MATRIXSYNTH Lounge
V-Combo VR-09 Tricks and Tweaks for Effects and Synth Sound Modifications!
Published on Feb 12, 2013 RolandChannel·761 videos
"V-Combo VR-09
Tricks and Tweaks for Effects and Synth Sound Modifications!
PART 1. [SYNTH BRASS] (00:00 - )
PART 2. [MODIFY "SYNTH BASS" TB-303 at the end] (02:18 - )
PART 3. [SYNTH BASS] (03:36 - )
PART 4. [ORGAN] (07:42 - )
PART 5 [CELESTA] (11:29 - )
Performed by Peter Schreurs from Belgium and filmed in Japan"
"V-Combo VR-09
Tricks and Tweaks for Effects and Synth Sound Modifications!
PART 1. [SYNTH BRASS] (00:00 - )
PART 2. [MODIFY "SYNTH BASS" TB-303 at the end] (02:18 - )
PART 3. [SYNTH BASS] (03:36 - )
PART 4. [ORGAN] (07:42 - )
PART 5 [CELESTA] (11:29 - )
Performed by Peter Schreurs from Belgium and filmed in Japan"
ROLAND Synthesizer Logo / Promo Sign
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Roland logo / sign
came from NAMM booth many years ago
'very cool and probably one of a kind!'
perfect for you music studio wall, dorm room, bedroom...or where ever you wanna show your love for ROLAND
logo is 1/8" black plastic on 2" thick styofoam & approx 8 3/4'' x 16 3/4''"
Follow-up to this post.
"Roland logo / sign
came from NAMM booth many years ago
'very cool and probably one of a kind!'perfect for you music studio wall, dorm room, bedroom...or where ever you wanna show your love for ROLAND
logo is 1/8" black plastic on 2" thick styofoam & approx 8 3/4'' x 16 3/4''"
Follow-up to this post.
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Auctions, Featured, Roland, Synth Bling
LABELS/MORE: Auctions, Featured, Roland, Synth Bling
Korg Monotribe Modded w/ MIDI, Drum Decay, and Separate Outputs
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Unit has MIDi I/O on mounted Dinsync jacks, (see pics), a total of (3) additional outputs for the Drums (Kick, Snare, HH) so all sounds can be recorded on individual tracks, nice! Also the Drums have the Tone and Decay mods, which is what makes it sound similar to an 808. Two pots control the decay of the Bass and Snare, and two switches for HH and Snare Noise/Decay. PAste this phrase into youtube: MONOMOD - Korg Monotribe Mod / Hack [posted here] to watch a video demonstarting the mods/sounds. (this is not my video, but the mod/sound is the same). Below I have posted some info on the MIdi Mod taken from Gameboy Genius' Blog [link].
Details
Sync: It will both send and accept MIDI sync, start and stop messages, meaning the sequencer can be reset over MIDI, which can’t be done remotely if you’re only using the regular sync input.
Notes: It will send and receive notes within the limits of the sequencer. It’s using channel 1 for notes. Notes outside these limits will be ignored. It doesnot react to varying velocities. It does however react to pitch bend MIDI messages and is able to record and play back pitch bend in flux mode! I don’t have MIDI out hooked up at the moment, so I can’t confirm this right now, but I’m assuming it also transmits MIDI pitch bend messages when it plays notes in flux mode.
Drums: It’s using the standard General MIDI specification for drums, which means the following notes on MIDI channel 10.
Name Note number Note name GM drum name
BD 36 C1 Bass drum 1
SN 40 E1 Snare dum 2/Electric snare
HH 42 F#1 Closed hi-hat
Control change messages (CC): It can send and receive CC for all the knobs and switches marked green above. The parameters are mapped as follows:
Name CC number Values GM parameter name
LFO rate 16 – General purpose controller 1
LFO int. 1 – Modulation wheel
EG shape 80 32=decay
64=sustain
96=attack General purpose controller 5
LFO target 81 32=VCO
64=VCO+VCF
96=VCF General purpose controller 6
LFO mode 82 32=Fast
64=Slow
96=1shot General purpose controller 7
LFO wave 83 32=Saw
64=Triangle
96=Square General purpose controller 8"
via this auction
"Unit has MIDi I/O on mounted Dinsync jacks, (see pics), a total of (3) additional outputs for the Drums (Kick, Snare, HH) so all sounds can be recorded on individual tracks, nice! Also the Drums have the Tone and Decay mods, which is what makes it sound similar to an 808. Two pots control the decay of the Bass and Snare, and two switches for HH and Snare Noise/Decay. PAste this phrase into youtube: MONOMOD - Korg Monotribe Mod / Hack [posted here] to watch a video demonstarting the mods/sounds. (this is not my video, but the mod/sound is the same). Below I have posted some info on the MIdi Mod taken from Gameboy Genius' Blog [link].
DetailsSync: It will both send and accept MIDI sync, start and stop messages, meaning the sequencer can be reset over MIDI, which can’t be done remotely if you’re only using the regular sync input.
Notes: It will send and receive notes within the limits of the sequencer. It’s using channel 1 for notes. Notes outside these limits will be ignored. It doesnot react to varying velocities. It does however react to pitch bend MIDI messages and is able to record and play back pitch bend in flux mode! I don’t have MIDI out hooked up at the moment, so I can’t confirm this right now, but I’m assuming it also transmits MIDI pitch bend messages when it plays notes in flux mode.
Drums: It’s using the standard General MIDI specification for drums, which means the following notes on MIDI channel 10.Name Note number Note name GM drum name
BD 36 C1 Bass drum 1
SN 40 E1 Snare dum 2/Electric snare
HH 42 F#1 Closed hi-hat
Control change messages (CC): It can send and receive CC for all the knobs and switches marked green above. The parameters are mapped as follows:
Name CC number Values GM parameter name
LFO rate 16 – General purpose controller 1
LFO int. 1 – Modulation wheel
EG shape 80 32=decay
64=sustain
96=attack General purpose controller 5
LFO target 81 32=VCO
64=VCO+VCF
96=VCF General purpose controller 6
LFO mode 82 32=Fast
64=Slow
96=1shot General purpose controller 7
LFO wave 83 32=Saw
64=Triangle
96=Square General purpose controller 8"
Mc505 Groovebox Factory Demo
Published on Feb 12, 2013 Lee Mitchell·54 videos
"Rolands Mc505 Factory Demos.......Love them or hate them....its 100% Roland Japan!
Straight from the outputs...no external processing....."
Roland MC-505s on eBay
"Rolands Mc505 Factory Demos.......Love them or hate them....its 100% Roland Japan!
Straight from the outputs...no external processing....."
Roland MC-505s on eBay
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
