MATRIXSYNTH: Friday, July 5, 2019

Friday, July 05, 2019

Experimental Ambient Demo (No talking) // Roland Boutique JX03 Demo

Published on Jul 5, 2019 Ron Cavagnaro

"This is an improvised Demo of the limited edition Roland Boutique jx03 digital synthesizer. The jx03 runs through an Eventide H9 and a Korg Kaoss Pad 3+. The sequence was programmed and played on the Synthstrom Audible Deluge."

Sirius’ Veil Stereo VCF Demo

Published on Jul 5, 2019 Sean Pendleton

New eurorack module & synth kitten.

"Sirius' Veil is a stereo state variable filter with interesting features.

First 3 minutes - Gravitational Waves as input
Last two minutes - Drums as input

The right audio input is normalized to the left audio input for mono input signals. There is a master cutoff control and master CV control in the middle, and a switch to invert the master CV to the left channel for panning type effects. Each channel has VC resonance, cutoff offset, offset CV, and a VCA. The right VCA is normalized to the left VCA.

You are able to choose the filter state (LP, BP, HP, NP) with a push button, or a it can be changed via a gate or trigger into the "state" input. A three position switch on each side selects the number of steps available (2, 3 or 4).

Pairs great with a Gravitational Waves!

Available in my Etsy shop."

Modor Eurorack- Noisy Oscillator/Comb Filter first impression

Published on Jul 5, 2019 Dziam Bass

"Hi Guys.
Today was a little crazy day but I managed to record one small movie with new modules from Modor this is some spontaneous movie but like now this modules.
To Noisy Oscillator and Comb Filter (effects like chorus and flanger)
basically I was having a little fun with it but I decided that this small sequence is fine to even show some sound of these great modules.
These modules are single-ended sections from the famous Modor NF-1 polyphonic synthesizer.
basically it's the VCO section and the second section of the effects. it also has a Formant filter but it was not used in this movie."

WIth an Impulse Command even Gloves can Dance

Published on Jul 5, 2019 Wein Glas

"In just a few minutes the Analogue Solutions Impulse Command turns everybody into an EDM producer! Even Weinglas after he took off his gloves?"

Teenage Engineering Pocket Operator Modular 400

via this auction

"LEGO wheels provide nice fine tuning of the oscillators and give it a unique look. Feel free to customize however you want and integrate into a much larger modular setup!"

SE-02 & NuEVI - CV Breath Demo - Mark Steiner

Published on Jul 5, 2019 Mark Steiner

"CV to breath from the Berglund Instruments NuEVI to the Roland / Studio Electronics SE-02. Very smooth and delicate attacks and swells.

For info/wait list on the NuEVI (and the upcoming EWI/woodwind version of it called the NuRAD), email

Johan Berglund made the breakout box used here than can bring CV from the NuEVI through both of the unused pins from the midi port.

For this instrument, I find it's best to use CV just for filter (from breath), and midi for other aspects. Also, I found using hybrid breath is best (it's sending CV to filter and also the cf breath setting in the NuEVI to the filter as midi CC). Otherwise, it appears the CV input for the SE-02 requires more than usual CV amounts, and may have some other special situations in the circuit I'm not totally sure on. But this works great!

So... set NuEVI breath to "cf"
2nd breath CV to VCF CV input on the SE-02
Turn the filter cutoff on the SE-02 to zero.
Turn the contour on the SE-02 to zero.
Also good to use gate hold on the NuEVI, especially if you will be playing large intervals."

𝐑𝐀𝐕𝐄𝐍 — πš…πš’πšπšŽπš˜ π™³πšŽπš–πš˜-πšπš’πš πšƒπšŽπšœπš πšŸπš’πšŠ π™Ύπ™±πš‚ 𝚝𝚘 πšπšƒπ™Όπ™Ώ

Published on Jul 5, 2019 birdkids

"The video-demo rig for the upcoming #RAVEN functionality and patch series is shaping up nicely - we thought to give it a go and live-streamed with the use of OBS and Soundcard Oscilloscope by Christian Zeitnitz ❤️"

Mode Machines ALKEX SID SN 3308204-215

via this auction

"Sampler Things" Teenage Engineering OP-Z Stranger Things - Season 3 tribute

Premiered 37 minutes ago amenemo1010
Update: Re-Published on Jul 7, 2019

Watch past the intro.

"After months of research, tests and preparation, I can finally announce my new video with OP-Z as the protagonist. Next to the great success of my previous video with the OP-1, this time I will squeeze the little boy from Teenage Engineering using the power of new Sampling features and the stunning DMX option, to realize a unique idea: the alphabet of lights to communicate with the upside-down. This is my tribute to Stranger Things and, above all, a tribute to all of you who support me through this channel.

I thank in advance anyone who will give me a little help with superchat donations"

Omri Cohen 5000 Subscribers Special Q&A Live Stream w/ VCV Rack

Published on Jul 5, 2019 Omri Cohen

"Thank you all for your support, for the nice comments, for the likes, and for the shares!

If you like what I do and want to support my work, consider joining my crew on Patreon -

If you find something interesting during the stream, please feel free to leave a timestamp link in the comments so other people can find it easily :) Thank you!"

Derezzed (Mile High Edit)

Published on Jul 5, 2019 Mark Mosher - Modulate This!

"This is a video from my 2013 archives. It's a cover version of 'Derezzed' by Daft Punk called 'Derezzed' (Mile High Edit)". My rig at the time was Ableton Live, Percussa AudioCubes, Moog Etherwave Theremin Plus, and Tenori-On sending MIDI notes to an Ableton Rack with VSTs. I used the Machine to control the arrangement in Ableton on-the-fly and to live sequencing the parts I wasn't playing live as well trigger clips in Live to automate changes in Resolume. The AudioCubes were used to trigger and control effects through gestures, as well as add 4 more dimensions of gestural control for effects for the Theremin. I used the Tenori-on to improvise a lead :^)

This video is actually a vehicle to illustrate show design concepts from my 2010-2015 Dark Sci-Fi Techno Show which was in support of some of my original sci-fi theme peformances. Check out a a much more detailed blog post that and info on the making of this video and track here

Mark Mosher
Boulder, CO"

Dub reggae on Roland TR8S, Elektron Octatrack

Published on Jul 5, 2019 Seen From Space

"Loops produced in Logic with sounds from DSI Pro 2, Virus C, Korg Volca FM, and my own voice. The 'guitar chop' is the Virus put through a spring emulation in Logic Space Designer; occasional lead sound and bass are the Pro 2; DX-style 'piano' is the Volca. (Nice to have a proper FM synth at last :-)"

Oberheim OB-MX SN MX001375

via this auction, also on Reverb.

"works perfectly

sounds amazing

it's got the latest OS - 1.04

2 voices"

Moog Micromoog Analog Mono Synthesizer w/ CV/Midi Converter.

via this auction

"100% fully functional micro moog. Fully-tested.

Even the ribbon pitch controller works.

Includes a new, unused CV/Midi Converter.

This has been in storage for the last few years.

Cosmetically, it is very good for it's age. Keys still have a shine. The right side piece of metal trim is bent a bit. See photos."

DSI Prophet REV2 | MIDERA | Once upon our ending

Published on Jul 4, 2019 MIDERA

"Dave Smith Instruments - Prophet REV2 demo

Eventide Blackhole VST"

How Imogen Heap Makes Music With Mi.Mu Gloves

Published on Jul 5, 2019 Reverb

"Imogen Heap's gloves have something to say, and we joined the visionary electronic performer/producer/songcrafter during soundcheck so she could share the secrets of these revolutionary Mi.Mu Gloves, and how she controls her sound using music tech and meticulously mapped hand movements.
Read more on Reverb:
More from Imogen Heap:
Learn more about Mi.Mu Gloves:"

fricko eurorack modules

Published on Jul 4, 2019 Rick Jelliffe


1. Fricko ProPulse Eurorack Synth Module Calibration
2. Conventional ADSR/AR EG cannot do portato
3. Clean Envelope Generator from fricko - portato
4. Two fricko Blip! waveshaper modules driven antiphase
5. Double constant-breadth pulses with dual Blip! Waveshapers from fricko
6. VelocitizerAudioAnimator on scope

Pictured: ProPulse DIY Eurorack module & simulation of the logic gates for the ARP ProSoloist pulse waveform generator.

"fricko unique eurorack pcb+panels

PCB/Panel combinations for analogue synthesizer modules exploring new areas of dynamic waveshaping and dynamic performance

Unique function, new ideas, new designs, new patches, new sounds!
Friendly on rack space: 4 and/or 6 HP panels and 30 to 70 mm deep!
Convenient for DIYers: assemble in a single evening, through-hole, reasonable space between components, test points, no expensive or rare parts, all analogue
What you will get: 1 x PCB (unpopulated), 1x panel (PCB material), build information.

Mutable Instruments CV Pal DIY assembly

Published on Jul 4, 2019 Uros Stojnic

"Very simple project. I just followed the instructions."

via @thonk_synth

"A time lapse video build of our CV Pal kit from Uros Stojnic -"

Valley Audio PLATEAU - modulated lush Plate Reverb (VST/AU) Demo #1

Published on Jul 5, 2019 TheKlirrfaktor

"This is the frist demo on Valley Audio Plateau (VST/AU).
This demo covers classic plate sounds on real instruments without the use of the modulators . In a real mix situation I maybe would have been more decent - but it's a demo -i t shall show you how the plugin sounds ;)
Stay tuned for more demos -crazy stuff is coming!
Plateau is available @"

Synth Jam 70: Moog Sub 37, Virus Indigo, Novation Circuit, Yamaha DX7 & Korg Radias

Published on Jul 5, 2019 Marcus Padrini

"A one-handed synth jam. Recording an idea sequencing some synths, with influences of Jarre and Stranger Things, and a Blade Runner-style synth lead.

Access Virus Indigo: Synth Pad
Moog Sub 27: Synth Arp
Yamaha DX7II: Synth Bass
Novation Circuit: Drums
Korg Radias: Lead
Roland MC808: MIDI Sequencer"

ondes Martenot + EHX Hot Tubes (+ BOSS RV5)

Published on Jul 5, 2019 Josh Semans

"Experiments with my ondes Martenot and the EHX Hot Tubes pedal, as well as the BOSS RV5. Part of an ongoing series of videos pairing the ondes Martenot with various effects pedals and sound processors."

Josh Semans ondes Martenot videos

Onde Magnetique OM-1 Cassette Synthesizer

via this auction

Onde MagnΓ©tique OM-1
Modified Sony cassette player
Wall adapter
Two 3.5mm TS patch cables (for connecting OM-1 to modified cassette player)
Pink Flute/Vox Cassette Tape
Green Feedback/Worn Out Cassette Tape
Pitch Ribbon + 3.5mm TRS cable
Manufacturer Box

Yamaha AN1X Control Synthesizer Analog Physical Modeling Synth

via this auction

Virtual analog synth with some unique models including FM.

KORG Polysix Vintage Polyphonic Analogue Synthesiser SN 461395

via this auction

Roland JD-800 Synthesizer SN ZC55502

via this auction

Oberheim OB-XA SN U06570230

via this auction

"The OB-Xa was released in December 1980, a year after the OB-X was released. Instead of discrete circuits for oscillators and filters, the OB-Xa (and the Oberheim synths to follow) switched to Curtis integrated circuits. This made the inside of the synth less cluttered, facilitating troubleshooting, and reducing the cost of manufacture. It was getting more difficult to service the OB-Xa due to the scarcity of Curtis chips; however, Curtis started re-manufacturing some of these chips in June 2016,[3] which has breathed new life into the longevity of the OB-Xa and many other synthesizers that use these chips. There are a couple of knobs missing but everything works really well and it sounds like a dream." DE10457

Electronic Music Laboratories Electrocomp EML-101

via this auction

"All functions work great and has new keyboard bushings. Missing handle strap and has a little chip in the right lower part of enclosure (see pic)
This synth sounds enormous due to 4 oscilltor layout, ring modulator is also very sweet."

Soma Lyra-8 and Eventide H9

Published on Jul 5, 2019 therudyrude

"Floating around with the Lyra-8 with a bit of Eventide H9 reverb"

Lyra-8 on eBay | Lyra-8 on Reverb | Lyra-8 on Amazon

Emu Ultra Sampler - Demo #10

Published on Jul 5, 2019 St0neOfficialChannel
Update: Re-Published on Jul 6, 2019

"All presets I made on Emu E4XT Ultra. After the recording was used lightweight compression and nothing else. Please use 360p or higher for better sound quality."

02- The ARP Pro DGX- Part 2: Presets 1

Published on Jul 5, 2019 AutomaticGainsay

"Here is part one of a three-part demonstration of the sounds of the various presets found on the ARP Pro DGX synthesizer."

ARP Pro DGX AutomaticGainsay videos

Patch n Tweak

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.