MATRIXSYNTH: Wednesday, October 7, 2020

Wednesday, October 07, 2020

Demo 13 - Juju 60, Prophet 600, DX7, Bit One, reveeeerb guitar and 🅱Ass


Valmont / Mooggy

"13th demo 4th EP but the 3rd one isn't released yet and the 2 firsts are in prototype state

https://linktr.ee/Valmont

Roland Juno 60, Sequential Prophet 600, Yamaha DX7, Crumar Bit, 1983 Quest Black Magic Bass, 1987 Young Chang Stratocaster, Strymon BigSky, EHX Small Clone, EHX Clone Theory, Waves J-37, Softube Drawmer S73, Arturia Tape-201, Eventide Blackhole, Waves CLA Bass, IK TR5 EQual, iZotope Mastering Essentials, Goodhertz Vulf Compressor, XLN RC-20, JST BG-Mix, A.O.M Invisible Limiter, Nomad Factory 80's Spaces, VPROM"

PROPHET 10 & OCTAVE VOYETRA 8 - Handmade Miniatures 1/6 scale


Ronaldo Lopes Teixeira ROLT

OCTAVE VOYETRA 8 - Handmade Miniature 1/6 scale.

flightofharmony INM E Simple Self-Patch Demos #2 & #3


flightofharmony

"Another four-cable self-patch example of the eurorack Infernal Noise Machine. This one starts in a higher range like static or white noise. The second half shows how the INM is made of "sweet spots", where small control changes greatly alter the sound. The INM-E is on my workbench in a circuit board holder.

This video was recorded while I was still trying to figure out the best recording settings in OBS and the motion is a bit choppy, but the sound is in sync and accurate.

Come check out the INM-E Kickstarter campaign! https://www.kickstarter.com/projects/...

(Module shown is a prototype.)"


Infernal Noise Machine Simple Self-Patch Demo #3


flightofharmony

"A two-cable self-patch example of the eurorack Infernal Noise Machine. This patch creates a pseudo-delay/reverb effect that is very apparent on headphones. Two more cables are added later for AR envelope

Come check out the INM-E Kickstarter campaign! https://www.kickstarter.com/projects/...

(Module shown is a prototype.)"

Additional posts here

Synthesizers.com Q165 Prototype Module Overview


synthesizersdotcom

"Check out what's included with our new Q165 Prototype Module Kit. Available for order here: https://shop.synthesizers.com/collect..."



The Q165 Prototype module gives the electronics experimenter a convenient way to implement custom circuitry for their 5U Moog-panel-format synthesizer.

The panel provides placement for knobs, jacks, switches and LEDs. White blocks provide space to write labels using a fine-point ink marker.

The prototype board provides center and side power rails, and enough space for 4-6 integrated circuits - typically op-amps. The pad-per-hole array accepts most common thru-hole components and is arranged like a typical proto board and solderless breadboard, but with additional holes on the sides to accept MTA connectors. The power entry section is laid out for +15V and -15V entry filters along with +5V for digital circuits.

A variety of parts are provided in the kit including PCB mounting spacers, MTA connectors for power, jacks and pots, along with a variety of common resistors, capacitors, transistors and diodes. Op-amp and an OTA ICs are also provided.

The user must supply the circuit design, tools, additional electronic components, and of course the skills.

The Q165 module accepts a standardized Synthesizers.com 6-pin MTA power connection.

Custom White Roland Juno-106 Analog Synthesizer Serviced by SynthSpa SN 512071



via this auction

"This Juno 106 was serviced and customized by SynthSpa a few years ago, and comes with a lifetime warranty on the voice chips. Complete with a custom white / blue facelift and handmade Walnut wood panels. Truly unique and beautiful."

Nord Lead 1 Virtual Analog Synth



via this auction

Jawbone (Korg Volcas & Sonicware Elz_1)


Holy Moonlight Crusader

"Electronic music made with table top synthesizers. Korg Volca Kick, Korg Volca FM, and a Sonicware Elz 1 are the featured synths. 8 bit and square wave music can be a lot of fun!
#Electronicmusic #Synthwave #FMsynthesis #FMsynth #Synth #EDM #Gamemusic #Music #8bit #8bitmusic"

Soundmanufacture Modular Sequencer - overview / how to start


Soundmanufacture

"This Video shows the basics how modular sequencer works.

0:11 the eight sequencers
0:25 the (internal) Outputs
0:44 patching
2:15 using different channels
2:50 Scales & Scale Correction
3:06 using the modifiers
5:05 random actions and switching things

Thank you!

download at http://www.soundmanufacture.net"



Modular Sequencer is a Max for Live Step Sequencer for Ableton Live 10.
The Modular Sequencer is a very flexible Sequencer, where you can patch every module with any other.

You can create Sequences from concrete & repetitive to totally endless & random.
The eight Sequencers can run in Sync or every single Sequencer can with it's own speed. Four of the eight sequencers are Trigger Sequencers to Trigger or to switch actions. The other four Sequencers can send out Values and Triggers (thru the Threshold)

The Value Sequencers can be assigned free to control the:
• Notes
• Velocity
• Ocatve
• Lenght.
of every of the four Outputs.

On every Output you'll find a Scale Correction, where you are able to create Sequences that always fit into the selected Scale or you can also learn Scales from the MIDI Input.

It also works Hand in Hand with the Chord-O-Mat 3.1 Device (the Update will be available soon) That means the Sequencer can be set up that it will have always the same Scale like Chord-O-Mat. If you change the Scale in Chord-O-Mat the Sequencer will select the same scale & vice versa.

It's also possible, that an Output of the Sequencer can follow the Chordprogression of Chord-O-Mat.

features of modular sequencer

• All Trigger Signals can be routed free from every Output to every Input thru the Patch-chords.
• create Polyphonic Sequences
• 4 internal Outputs where you can assign the Sequencers to the Note, Velocity, Octave & Length
• Scale Correction in every of the four Outputs
• Scaleable GUI from 80% to 140%
• Modulation Section, where you have up to 8 Modulators to invert a signal, probability & filter Triggersteps,
• 4 locical operators, where you can combine the Value of two sequences."

Orbital | How I Play Live


DJ Mag

We go behind the scenes with Orbital to find out how their live show works.

Made up of brothers Phil and Paul Hartnoll, Orbital played Inner City Electronic Festival in March, just prior to the UK's COVID-19 lockdown. We caught up with the seminal UK rave duo to talk through how they play live.

Baseck Plays: Roland TR-6S


Perfect Circuit

"@baseck shows us that the size of the Roland TR-6S is no representation of its booming sound. The TR-6S is the latest drum machine from Roland that carries the torch which has been burning bright for decades now.

This is a 6 channel drum machine with an FM sound engine, an expansive preset sample library, and detailed circuit models of the Roland TR-808, TR-909, TR-606, TR-707, and more. This is undoubtedly a powerful addition to Roland's hardware lineage that is sure to bring unexpected movement to your live sets.

Roland TR-6S available here: https://www.perfectcircuit.com/roland..."

Woggle Science!! Frequency to Voltage


MAKEN0ISE

Looking for patch ideas to try with Richter Wogglebug's audio outputs? Wondering what the module's "Influence" input does? You've come to the right place! This video explores using the ever-experimental Wogglebug as a crude frequency-to-voltage device as it attempts to track both an oscillator and an audio recording.

For more on the Wogglebug, head to our website:
http://makenoisemusic.com/modules/ric...

http://www.makenoisemusic.com

TR 808 through HSS 2020 + sync


ggijs

See this post for additional details.

Grendel - RA-99 Grenadier



via this auction

The Grenadier RA-99 is the successor of the Grenadier RA-9, a semi-modular analog synthesizer with variable waveform VCO, triple resonant filter (2x bandpass and 1x lowpass), sub oscillator and pink noise and audio input for external signals. Midi is still omitted and the control is done via CV/Gate.

Compared to the RA-9, the Grenadier RA-99 is enhanced by the following features:

14 instead of 10 parameters for sound control
20 instead of 14 Patchpoints
The switchable oscillator (square/triangle) was replaced by a variable waveform oscillator (trapezoid)
Pink noise source
Instead of a single decay envelope there is now a variable AR or two decay envelopes (depending on the settings)
The filter was changed from 3x bandpass to 2x bandpass and once lowpass
The oscillator can now be controlled with 1v/oct (x2), 5V/oct, 15V/oct
The housing is no longer made of coated steel but of extruded aluminium
Therefore the sequencer and the mini-keyboard had to give way

Vintage 1970s E-Mu Systems Home Built Synthesizer Blueprint Technical Catalogue



via this auction

"RARE E-mu systems early technical catalogue, includes instructions on how to build your own synthesizer. Also includes 1974 catalogue updates, and receipt that includes the E-Mu systems early address. In a simple binder, 8 1/2 x 11 pages. Overall excellent condition with light page yellowing and some creases here and there."

Korg Triton Studio V2 w/ Japanese Documentation



via this auction

1970s Suzuki EB-250 Bass Master Synthesizer SN 00199 w. Case



via this auction

This listing is for a Vintage 70s Suzuki EB-250 Bass Master Synthesizer from the recording arsenal of producer T Bone Burnett.

SPECS:

Serial #00100
Power: 100V 50/60Hz
Wattage: 2W
Keys: 25

Oberheim OB-XA w/ MIDI



via this auction

autophage demo


Will M

Not to be mixed with Rare Beasts Autophage. Will M is the man behind Molasses Industries.

STVC Tutorial: How to make an Organum Chant Choir sound


WaldorfMusicChannel

"Want to know how angels sing? Check out our latest STVC tutorial!"

|||ACID_LOOP|||


"Arpoloop, TB 303 and other synths jam"

SOLAR 50 Review, full tutorial and patch ideas // Elta Music's 10 voice synth explored


loopop

TIMELINE:
0:00 Intro
0:40 Overview
5:00 Connectivity
5:30 Stereo/mono
6:45 Noise/bleed
8:05 Oscillators
9:35 Osc cross mod
11:15 ASR VCA env
11:45 Pitch mods
12:35 Light sensor
13:25 Env patches
14:25 LFOs
15:00 Contact mic
15:25 Filter
16:20 Effects
22:10 PATCH IDEAS
22:15 Velocity mod
23:10 Stackcables
23:40 Cascading vox
24:15 Sequencing
24:35 FM radio noise
25:00 Trig seq
26:00 Motion rec
27:00 vs Lyra 8
27:55 Pros & cons
31:25 Outro

Elta SOLAR 50

How to put a vocal through the EMS Synthi AKS - VCS3 - filter vocal, & internal spring reverb.


Andy Whitmore
How to put a vocal through the EMS Synthi AKS - VCS3 - filter vocal, & internal spring reverb.

I find that every-time I do this job - I forget one of the patch setups. I have made this video to remind myself & others how to wire up the Synthi AKS so that it works perfectly & quickly.

The sound is unbeatable - it adds character to a vocal - buy one quick - they are worth the money.

New Adventures in K7 : How to Process Drums with MS20 Filter w/ Cat

Khoral

Let's record an analogue electro EP on K7, episode 3.
Where we learn how to use the Korg MS20 Mini as an external analogue filter.

The complete signal chain:
Source to VCA In
VCA Out to Ext Signal In
Trig In to Pink Noise
Phones to ESP Signal In
ESP Env Out to VCA Initial Gain
Pitch Bend to VCA Control Input
SHOW LESS
PREVIOUS PAGE NEXT PAGE HOME



Patch n Tweak

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH