M569, Control Yourself! Part 7

video upload by John L Rice

"Just some experimentation using a Moon Modular 569 sequencer as an envelope generator for fun and education. 🤓

Modules from the following companies were used:
Moon Modular
Oakley Sound/Krisp1 For You
Synthesizers.com
Synthesis Technology"

Storm Bringer

video upload by John L Rice

"A quick patch and noodle on my main system for fun and stress relief! 😊

Synth modules from the following companies used:
Synthesis Technology (VCOs)
Moon Modular (VCFs, sequencer, switching, MIDI to CV)
Oakley Sound/Krisp1 (VCAs)
Club Of The Knobs (poly EG, master clock)

Other gear used:
Mellotron M4000D Rack
Yamaha FS1R
Samson S-Patch Plus patchbays
Mark Of The Unicorn Midi Timepiece AV
Allen & Heath MixWizard 3 20S
Roland RSP-550 effects and A-88 keyboard
Strymon BigSky and timeline pedals
Tascam SD-20M flash recorder
Canon C100 MKII camera and CN-E 20mm lens
ATOMOS Ninja Flame video recorder
Blackmagic Design DaVinci Resolve editing software

#modularsynth #electronicmusic #mellotron"

Quick Test/Demo Of The “FINAL” arrangement Of My Battery Powered Eurorack Toolbox? ;-)

video upload by John L Rice

"Never say never but I can’t help but be optimistic that this setup will never change! 🙄🤣

This customized Ace toolbox contains modules from the following companies:
Tiptop Audio
Behringer
Ladik
Happy Nerding
2hp
Intellijel
Doepfer
Bubblesound
Erica Synths
Qu-Bit
MengQi

The battery is a Talentcell LF4100"

Testing the “final” arrangement of this little Eurorack Modular ;-)

video upload by John L Rice

"Vermona meloDICER being clocked and 'diced' (randomized) by an Erica Synths TRIGG while I play with the melody range. The voice is a Happy Nerding HM VCO pulse wave out into an Erica Synths MODulator module (EG and VCA). The VCO’s pulse width is being modulated by a 2hp Seq sequencer module that is also stepped by the TRIGG module. All in a 4ms Company Pod48x case and reverb from the external Yamaha MG 10 XU mixer.

#eurorack #eurorackmodular #modularsynth"

A simple but fun and inspiring patch July 23 2026

video upload by John L Rice

"A simple but fun and inspiring patch July 23 2026

Vermona meloDICER, Happy Nerding HM VCO, Bubblesound 141, 2hp Verb"

Improvised Tongue-Pan and Electronics at Real Art Tacoma WA USA July 19th 2026

video upload by John L Rice

"Custom Yudin Workshop Pulsar tongue drum with the following notes:
A#2, F3, G#3, A#3, C4, C#4, F4, A#4, C5, C#5
Buy one of the many stock scales or create your own scale here:
https://yudinworkshop.com/

To process the tongue drum the pedal chain was:
Meinl Sonic Energy magnetic pickup
Revival Electric Synapse V2 preamp with effects loop
Strymon Lex rotary speaker emulator
Retro Mechanical Labs Electron Fuzz Custom distortion
Walrus Audio Slö reverb

The small Eurorack modular consists of:
Vermona meloDICER sequencer with MEX3 MIDI expander
2hp Rnd random voltage generator/clock
Tall Dog µBraids SE (Mutable Instruments Braids clone)
Expert Sleepers Disting mk4 multi function module
4ms Pod48x case (modified to mount the MEX3 on the side)

The JMT LD-2 drone box was patched into:
Swiff Audio C-10 tuner
TC Electronic Ditto Looper
Meris Mercury7 reverb

The outputs of the three sections above were patched into:
Behringer Xenyx 502S mixer
Radial Engineering JDI Stereo Passive Direct Box

Additional items used:
RockStock Pedals The Bright Switch charger/gooseneck lamp
Pedaltrain Classic JR and Metreo20 pedalboards
Gibraltar 5706EX tall snare drum stands
NiuNyuNeu Clamp On Mic Stand Tray
Strymon Ojai power supplies for pedals
Furman SS-6B 6-outlet power strip
Tendrils Cables for Eurorack
Various commercial and self made cables

Thank you for watching, rating, and commenting! 💖🤗

Tip jars:
https://buymeacoffee.com/johnlrice
https://ko-fi.com/johnlrice87789

#electronicmusic #noisemusic #tonguedrum"

JlR was gifted a Moog The Source Synthesizer!!!!

video upload by John L Rice

"My awesomely generous friend Mike is down sizing to move and gifted me some things he no longer uses! (Besids The Source see what else he gave me at he nd of the video! 🤯) Mike and I were in the prog rock band THEATRE 🎭 in the 80’s and he used the Moog Source in the band. If you go to my main YouTube page you can find my other links and one takes you to the THEATRE page that the bass player Kevin maintains. (I played drums in the band)"

Roland Fantom XR Synthesizer Demo

Note: links to listings are affiliate links for which the site may be compensated.
video upload by John L Rice

"A quick simple demo for potential buyers on Reverb. This is not listed yet but I should have it up this week. Please keep an eye on my shop for this and other tasty music gear!
https://reverb.com/shop/johns-boutiqu...

Index:
0:00 - Beginning
0:20 - Power On Sequence
0:46 - Simple Sound Test And Features
4:03 - Factory Demo 1
5:18 - Factory Demo 2
7:07 - Factory Demo 3
8:32 - Factory Demo 4
9:48 - Factory Demo 5
11:03 - Factory Demo 6
12:42 - Factory Demo 7
15:08 - End"

Alesis NanoSynth - Rare Prototype Demo

video upload by John L Rice

"I thought I would document this prototype example of an Alesis NanoSynth I bought on eBay long ago, before I sell it. I didn't take the time to verify if the sounds are all the same as a production model or not, but I suspect there may be some differences? One thing not working as far as I can tell is the built in factory demo that all production versions of Alesis Nano synthesizers have. And yeah, that's not me talking, I wanted to learn how to use the AI text to voice feature in DaVinci Resolve. (sorry not sorry! 😁)

Index:
0:00 - Introduction
1:57 - Category Piano
4:09 - Category Chromatic
5:38 - Category Organ
7:32 - Category Guitar
8:34 - Category Bass
9:58 - Category Strings
11:35 - Category Ensemble
13:12 - Category Brass
14:16 - Category Reed
15:21 - Category Pipe
16:39 - Category SynthLead
18:29 - Category SynthPad
21:21 - Category SynthFX
23:57 - Category Ethnic
26:13 - Category DrumsPerc
28:37 - Category Effects
30:33 - Category Piano
30:54 - End"

Other Alesis Nano Demonstrations:

Alesis NanoTracker Demo

video upload by John L Rice

"This is a very brief demo of most of what I know how to do with the NanoTracker MIDI recorder. This is just for historical purposes and for when I put it up for sale on Reverb. ;-)"

Alesis NanoBass - Factory Demo

video upload by John L Rice

"I made this quick video for an Alesis NanoBass synth module that I'm going to be selling and decided to make it public just in case anyone is interested. I think all of the Alesis Nano synths are fantastic and very underrated and underestimated. I own a NanoPiano, NanoSynth, and two NanoBass units (that's why I am selling this one)"

Mostly Peaceful Synthesizers In The Sea

video upload by John L Rice

"Nine Modcan B modules, three Synthetic Sound Labs modules, Mellotron M4000D, Roland Integra7, and Strymon and Lexicon effects.

So many fishies, left in the sea. So many fishies, and my synthesizers and me . . . 😁

#modularsynth #electronicmusic #synth"

Complete ROLAND SYSTEM 700 (7 Blocks)

video upload by Ian Nieman

This one is in via John L Rice.

"Here is a short video showing the layout and module configuration of a complete ROLAND SYSTEM 700. Be sure to check out @AlexBallMusic channel for more info on how the 700 functions, and some sound demos. If you are interested in general tutorials on how to use a synthesizer be sure to head over to @anthonymarinellimusic Youtube channel, or check out his "Think Like A Synth" program.

** This video is unedited, no script. One camera, one take, so if there are mistakes sorry for that :)"

ROLAND SYSTEM 700 - what does it sound like??

video upload by Ian Nieman

0:00 - Intro
3:10 - Sequencer Starts
10:20 - Using Keyboard Controller
11:40 - Portamento
22:29 - Mono Phase Shifter
25:15 - Outro

"Just going through some basic routing to illustrate the sound (sonic) of the System 700 Maincab (Block 1). No external FX etc ... direct into Protools. My intent is to let you hear what a 700 actually sounds like. Hopefully you have half decent speakers etc ... I do notice a bit or distortion, mostly caused by the Reverb tank being overdriven!

Because this was a 'live' and do notice I didn't go through all the modules, but again that wasn't my focus.

Thanks~~

Sorry the autofocus was stuck.
** Not intended to be a "performance" in an way or instruction on how to use a 700 :)

#roland #rolandsystem700 #synth #synthesizer #analog #Japan #music #producer #tools"

Quick Look at the Polyfusion Series 2000

video upload by Ian Nieman

"Happy New Year~. Let's start the year off with a Quick Look at my Polyfusion Modular. When I get time I will make a video so you guys can hear it in action. Thanks!"

This one is in via John L Rice.

JLR's Modular Synthesizers - System Breakdown #15

video upload by John L Rice

"This is my fifteenth video breakdown/rundown, this time for my largest system, the mighty 5U "wall"! 🥳 This is likely the last installment of this series.

Index:
0:00 Beginning
2:23 Preface
4:30 Introduction
5:28 Section 1

CLICK FOR MORE »

NEW Mellotron Micro Module - 2025 review and demonstration video

video upload by Now You Know

"Review of the new for 2025, Mellotron Micro Module. Basically a Mellotron Micro without the keyboard. Use your own controller keyboard with the Mellotron Micro Module. Review the micro module for its sound, functions, price point. In 2025, the Mellotron Micro is retailing for around $500 USD. I paid $695 CAD. Thanks @MellotronFactory for this wonderful instrument."

This one is in via John L Rice.

New CLUB OF THE KNOBS Modules For a Colourful Winter Time

This one was sent my way via John L Rice, via CLUB OF THE KNOBS.

"For a colourful winter time:

CP19 FOUR VOICE MIDI ADAPTER

C921P VOLTAGE CONTROLLED DUAL OSCILLATOR

p.s.

Also NEW in 2025 [not pictured, but mentioned in Dec 2024]

NEW! 2025
NEW! CP18 CHROMATIC TUNER
NEW! C929 VOX HUMANA (in addition to C1610 RESONATORS/FIXED MODIFIERS)"

http://www.cluboftheknobs.com

Rest In Peace Jon Andersen

video upload by Jon Andersen

Friday morning classical guitar and strings

video upload by Jon Andersen

This one is in via John L Rice who had the following to say:

"'Just me' on ModWiggler spotted this Facebook post of Jon Andersen’s family seeking help and information on selling his Synthesizers.com modular. They posted a link to a video of his from 5 years ago of a performance he did with his modular and a couple keyboards. He only had one other video where he plays guitar and a keyboard."

Both videos are featured above.

Click through the Facebook link if you'd like to help or just leave your condolensces.

Hans Zimmer Next Level Giorgio III Monumental 5U Modular System

Hans Zimmer 2025 - Batman Dark Knight - Opening - Cologne / Köln - Next Level Live

video upload by C3|Nik

Pics and details below. First the video description:

"Some thoughts regarding the "Hans Zimmer - The Next Level" concert:

Amazing! Amazing! AMAZING!

I went to all shows of Hans Zimmer, some I've seen even multiple times. The sound quality of "Next Level" blew them all out of the water. It was louder, it was more intense, really top notch sound engineering. That part at 5:50 in the video was extremely intense, I have never experienced that kind of bass before. I sat close to the front, there was a line of subwoofers right in front of me, I would not be surprised if that part causes some anxiety for people, that's how intense it was.

Some pieces were re-arranged which was an interesting touch, it added a nice new dimension to it.

I can recommend it. It is expensive but a one-of-a-kind experience in my opinion."

Update: SynTesla video below added.

GIORGIO III, Hans Zimmer's monumental synthesiser manufactured by SynTesla

video upload by SynTesla

"SynTesla is the manufacturer of the gigantic GIORGIO III modular synthesiser commissioned by Hans Zimmer for his world tour 'Hans Zimmer Live The Next Level'. Discover the unboxing and assembly of this fabulous instrument."



This one is in via John L Rice.

via pidjyman on Mod Wiggler:

"The Giorgio III is a monumental 5U Modular synthesiser created by SynTesla (Pierre-Jean Tardiveau, aka pidjyman on MW) for composer Hans Zimmer for his world tour.

This synthesizer is undoubtedly the largest modular synth in the world, consisting of 12 cabinets measuring 5 x 5U + 1 x 3U in height. Only 10 cabinets are installed on stage, with two others serving as back-up behind the scenes.

This monster represents 10 months of hard work in total. 23 types of modules were designed and produced in large numbers. To give you an example, the synth is composed of 3 separate units of 4 voices each, for a total of 12 voices, with 2 VCOs, 2 DCOS, 2 filters, 6 DADSRs, 6 VCAs, 1 resonator, 4 LFOs, buffered multis, logic, attenuators, attenuverter, mixers, wavefolders, gate delays, summing mixers, etc. etc...

The modules were manufactured in France by Syntesla and designed by Yusynth and SynTesla. They were assembled in Los Angeles at Hans Zimmer's studios and then shipped to Germany for final assembly on the tour stage.

When the synth arrived in Oberhausen, Hans Zimmer had never seen it before (he was rehearsing in London while it was being assembled in LA), and I can promise you that his smile in the photo is not fake (neither is mine).

The electrical part of the cabinets was also designed and built by SynTesla. It includes an oversized power supply with a capacity of 10 amps, an active filter that provides perfectly stable and clean voltage, and a power distribution board in SynTesla and DotCom format, as well as an integrated voltmeter and ammeter. The whole system has several levels of safety.

This made it possible to connect each cabinet to a solid-state relay socket controlled by DMX from the lighting console. The robustness of the device allows the whole or part of the system to be switched on and off in sequence, depending on the pieces being played on stage."

Remembering Gert Jalass of MOON MODULAR

John L Rice wrote in to let us know today is the late Gert Jalass' birthday. I met Gert a few times at NAMM, and John would often man the Moon Modular Booth. Gert was a great, kind soul. I miss his smile; I miss his presence.

John mentioned the Moon Modular website has had a few updates since his passing. The About and History pages are worth a look.

You will find the following there:

LUNAR MAGIC | Gert Jalass’ Work of Life

as well as

THE HISTORY OF MOON MODULAR 2002 - 2025.

Steffen Marienberg of Marienberg Devices Has Passed Away

Some sad news in via John L Rice, via the Sequencer.de forums

Google translation of attached funeral notice:

“We are sad that we have lost you. We are grateful that we were able to live with you. Steffen Marienberg *September 30, 1961 +August 19, 2025 In silent mourning: his Sigrid, his brother Holger, and all relatives. Alterode, August 2025. The funeral service, followed by the urn burial, will take place on Saturday, September 13, 2025, at 2:00 p.m. at the Hoym cemetery.”

Marienberg was a maker of 5U modules. You can find the Marienberg website at http://marienbergdevices.de/.

See the Marienberg label for a posts dating back to 2013 featuring their gear.

Tube based 5U System Coming in 2026 From Knifonium Maker Jonte Knif

You might recall the Knifonium from previous posts here.

John L Rice wrote in to let us know Jonte Knif is working on a tube based 5U System. Pictured here are a few images John pulled from Facebook.

CLICK FOR MORE »