Atari Hotz Metal Jam - Hotz Sessions Episode 1 - Atari ST MIDI Music with Roland 2080 Synthesizer!

Published on May 17, 2020 Clint Thompson

"Greetings Everyone!

Thanks for stopping by to check out this video! Here is a quick melodic Metal Jam I had a lot of fun making while using the Atari Hotz setup with a Roland 2080. This setup utilizes the Translator software running on a custom Atari ST (MiST FPGA) rackmount unit that remaps the keys that allowed me to create this song with ease. You may be able to notice with how I'm playing this particular tune and what it would sound like if played on a regular synth/keyboard without the software in action.

Anyways, I hope you enjoy the video and if you do, please share it with someone you may think would enjoy it as well! This is my first "real" song created using the combination of both Hotz hardware and software together as a complete system. I'll be creating many more Hotz related videos in the near future so please subscribe if you're interested in seeing more. There's a lot more fun to be had with this system!

Would love to hear your thoughts below.
Thanks for watching!

-Clint
\m/"

ESK - Kodamo EssenceFM + Manikin Schrittmacher

Published on May 17, 2020 Metunar

"Jamsession with the Kodamo EssenceFM Synthesizer and the Manikin Electronic Schrittmacher Sequencer.
On my Kodamo i replaced the knobs. Looks better now.
Direct recording with mastering.

http://www.metunar.ch"

Nord Micro Modular synth with Original Box and power supply

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Emu Emax Rack SN 0200258

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Great condition Emax emax ii Rack. Works great and comes with a 4mb memory expansion (rare) plus one 1mb on the main board ! Great Rack sampler !!!"

CLICK FOR MORE »

E-MU Systems Emax II SN 06201599

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Mint condition E-mu emax keyboard!! Everything works like new all original, except the floppy was replace for a new one ! Works great !! Super clean !"

CLICK FOR MORE »

Conjured Circuits JP6 Multimode VCF

"A sweep through the octaves and modes. Analog spring reverb used from Synthesizers.com"



"Sorry for line noise."

Note 2U refers to the width. This appears to be a 5U or MU module.

"Jupiter-6 Inspired Multimode Filter

The Roland Jupiter-6 is a 1980s analog polysynth with a great sounding multimode filter that is quite distinct from other Roland filters of the same era. Here it is recreated in a 2U Moog Unit module with an added 2-pole 12dB low pass mode, reminiscent of the Jupiter-8. As with most vintage Roland filters, it is based around a cascaded Operational Transconductance Amplifier (OTA), in this case using the LM13700 OTA in place of the obsolete Roland IR3109 quad OTA.

4 modes: 24 dB low pass, 12 dB low pass, band pass and high pass
2 audio inputs, logarithmic attenuated
2 frequency CV inputs, one unipolar input and one attenuverted input
1 resonance CV input, attenuated

Available 3/2020

System80 JOVE design licensed under exclusive waiver of non-commercial license.

15 mA +15V
10 mA -15V
0 mA 5V
Ø 5.00 (2 Votes) Average Rating"

Subharmonicon Third (with Nord Drum 3P)

Published on May 17, 2020 verstaerker

"Moog Subharmonicon with some additional Filter-sequencing and PWM-LFO
and some powerful Nordrum 3p drums"

Update: the original video was replaced with a new version. Moving this post up.

A Division 6 Noodle

For those interested, I just added a short Division 6 noodle to this post. Nothing life changing by any means, but a little fun none-the-less. :)

Roland System-8 Jupiter-8 Beauty & the ARPs ACB Synthesizer Rik Marston

Published on May 17, 2020 Rik Marston Official

#rolandsystem8 #rolandaira #rolandjupiter8
Roland System-8 "Beauty & the ARPs"
Synthesizer Demo & Spells by Rik Marston
***Watch in HD!!*** ***Turn it UP!!*** ***No Talking!!!***

The Roland System-8 is my favorite synthesizer!
OMG this synthesizer does the trick & hits all of
my sweet spots! I LOVE IT! Thank you, Roland!
Here I demo a Dark Pad & slowly transform it into
a Plucky Bass for ARPs. Jupiter-8 Plug-Out ROCKS!

Meteorite friends featured:
Three GREEN Moldavite Tektites from the Czech Republic!

All Music & Video (C)2020 Rik Marston / Marston Manor Productions
Recorded into the BOSS BR-600 with no extra FX!

Depeche Mode - My secret garden - synth cover with Korg minilogue xd

Published on May 17, 2020 Synthcomp

"I made this cover just for fun using only the Korg minilogue xd for synth sounds. The rhythm track is vsti. The used patches without external processing can be seen from 4:45. Thanks for watching :-)

Original music and lyrics by Martin Gore"

Moog One and 5U Modular Synthesizer

Published on May 17, 2020 Ariyo Shahry

"Moog One and 5U Modular synthesizer jam. The base of this system is a Synthesizers.com System 66. Over time I've added other modules to my system.

Multitrack recording and drums are programed using Reason Studios

The video is shot on Fujifilm XT3 camera body with a Fujifilm XF 56mm F/1.2 Lens

In this video the following modules are featured:

- Moon Modular M 569 Quad Sequential Voltage Source
- Moon Modular M 543 Stereo Output Mixer
- Moon Modular M 568 Quad Sequential Trigger Source
- Analog Craftsman ac2600 Voltage Controlled Filter (VCF)
- Dove Audio WTF Oscillator
- CorSynth C107 Quad Linear VCA/VC Mixer
- Synthesizers.com Q150 Transistor Ladder Filter
- Synthesizers.com Q106 Oscillator (VCO)
- Synthesizers.com Q109 Envelope Generator
- Synthesizers.com Q110 Noise Source
- Moog Moogerfooger MF-104M Analog Delay"

ESTRADIN 230 AND RMIF ELSITA. Test after repair and tuning.

Published on May 17, 2020 Alexey Taber

RMIF ELSITA .Vintage Soviet drums module. midi test after repair and tuning.

Published on May 17, 2020 Alexey Taber

Teenage Engineering pocket operator modular 170 jams

Published on May 17, 2020 SyntherJack

3 jams with TE POM170 modular system.
No additional effects, pure 170 tweaking.
My homepage: syntherjack.net

Malekko Wiard Gargoyle 60HP semi-modular system

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"wiard / malekko gargoyle 60hp semi-modular analog synthesizer. a slimmed down eurorack approximation of grant richter's original wiard system in a stand alone case.

includes the following:
- wiard classic oscillator (saw, sine, triangle, and square outputs w/ phase modulaton)
- wiard envelator x 2 (versatile and naturalistic looping function / envelope generator)
- wiard xmix (vc controlled crossfading utility mixer)
- wiard borg 2 filter (screaming vactrol based LPG/filter derived from the korg ms20 filter)
- xaoc tallin dual vca (lovely transistor core vca pair with clipping options)
- moog 60hp semi-modular case with built in tiptop uzeus power supply and flying busboard (this has been installed on the INSIDE along the back of the case, to maximize precious front panel space. see pics)

took forever to hunt down these rare modules individually, but im offering them to you here as a complete, ready to go synth. condition is very good, although they all will have some degree of rack rash (to be expected with 10 year old modules). all original boxes and documents included, where available."

CLICK FOR MORE »

Waldorf Q Synthesizer Rack Desktop SN 2420260000388

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Studio Electronics MIDIMini Analogue Synth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Studio Electronics MIDIMini in good working order. This is not the new reissue but an original from the early 1990s.

It's basically a Minimoog, in a 19-inch rack case, with MIDI and a lot of really useful extra features. These include a dedicated LFO, oscillator sync, a Sweep control and full MIDI control including velocity and aftertouch sensitivity. Sounds exactly like a Minimoog should, except more stable and a lot more versatile!

Still plays perfectly and sounds amazing."

CLICK FOR MORE »

Arp Rhodes Chroma Keyboard & Expander w/ New Custom Wood Case w/ Fans

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This one has been professionally serviced by expert synth guru EPR Electronics. It has a clean bill of health.

It also has new custom wood case and repainting of some of the metal chassis. Includes rare, original foot pedal. It really looks incredible, maybe the nicest Chroma you will find. It's in near mint shape now with only minor signs of wear. It includes upgrades like midi and a fan so you will never have overheating issues. This is one of the great analog vintage polysynths, Don't miss out on your change to grab one of these legendary synths!"

CLICK FOR MORE »

Division 6 CEM3340 VCO & Business Card Sequencer

Published on May 17, 2020 matrixsynth

Update: crazy little noodle added above. Description: "I don’t know what this is, but it sure is fun. Division 6 CEM3349 VCO oscillator sweep, Malekko Richter Oscillator II sequenced by Division 6 Dual Mini Sequencer and Tiptop BD808 and SD808 triggered by Z8000 Matrix Sequencer/Programmer. Noisering modding the Oscillator II for a little added grit. All through Mattson Mini Modular JP VCF and finally TC Electronic M300. Peeeeew!!! Kidding aside, listen to how low it goes with decent speakers. The CEM3340 was used in the Moog Memorymoog, Oberheim OB-Xa, Octave Voyetra Eight, Roland SH-101, MC-202, Jupiter-6, MKS-80, Sequential Circuits Prophet-5 10 & T8, Pro-One, Prophet-600, Banana Poly Synth, Crumar Spirit, Synton Syrinx, and more. See for yourself here. The Curtis CEM3340 was re-issued in 2016."

A few pics of a surprise package in the mail the other day. :) A Division 6 CEM3340 VCO & V2 update chips for my Business Card Sequencer. Pics of them in the rack below. Looking forward to giving them a run through.

See the Division 6 website for additional details on each.

CLICK FOR MORE »

Roland Gaia SH-01 and Strymon Big Sky Demo

Published on May 16, 2020 adnmusic

Synth : Roland Gaia SH-01

Reverb : Strymon Big Sky

Sound only, no talking

Modal Argon 8m Dub Chords + Synthstrom Deluge | Dub Techno Session #11

Published on May 17, 2020 LUSS

Modal Argon 8m: Chords
Deluge: Drums & Bass
Boss Re-20: Delay
Strymon Blue Sky: Reverb

Prophet Rev2 Sound Demo | Channel 11 Night Raiders 🎧🎛

Published on May 17, 2020 Synth & Sundry

"100% Prophet Rev2 sounds in this atmospheric synth-laden overflight of downtown Chicago. All the Sequential presets used were heavily modified for maximum analog polyphonic synthesizer goodness. Some of the synth sounds were sequenced on Ableton Live and others were played in live as the track was recorded. How warm do you find the production?

The entire track was produced with the 16-voice version of the Sequential Prophet Rev 2. It was recorded and mixed in Ableton Live using an RME UCX interface.

Music and Video was composed, produced and edited by Alpicat for Synth & Sundry. All music and footage is original.

The footage was recorded during a night time overflight of Chicago using the Laminar Research X-Plane 11 flight simulator. The footage was then edited and finalised in DaVinci Resolve.

If you'd like to support this channel with a one-off purchase, please check out our affordably priced music: https://synthandsundry.bandcamp.com

Here is our dedicated Prophet Rev 2 playlist:"

Novation Peak & EHX Big Muff

Published on May 17, 2020 3rdStoreyChemist

Live music from junklight

Published on May 17, 2020 junklight

"Some improvised electronic music

Multistreaming with https://restream.io/?ref=wq3w8"

ASTROGENIC HALLUCINAUTING - late night noiz for late night fiends

Published on May 17, 2020 thenoiztemple

- for more noiz: https://itunes.apple.com/us/artist/as...
website: http://manipulate.net
Created during The Plague.
#covid19
#coronavirus
#isolation
#quarantine

Alteration - BIA, Morphagene, Arbhar, Magneto, Nebulae, Microcell, Mimeophon, 2HP Freez, Disting

Premieres May 17, 2020 Omri Cohen

"If you like what I do and want to support my work, consider joining my crew on Patreon - https://www.patreon.com/omricohen

You can get the WAV file for this track on my Patreon page - https://www.patreon.com/posts/37135952

I'm using DistroKid to distribute my music to Spotify, iTunes, Apple Music, and more. By signing up through this link you will get 7% off and will support this channel :) - http://distrokid.com/vip/omri

Here's my latest release on Spotify, iTunes, and more - https://distrokid.com/hyperfollow/omr...
Also on Bandcamp - https://omricohencomposer.bandcamp.co...

Here are some patch notes:
--------------------------------------------------
- I have a sequence programmed on the KSP, but each step has a very low probability of actual playing. This is sequencing the BIA.
- The BIA is going through the Mimeophon, and I'm modulating the Halo and Rate controls with S&H coming from VCV Rack.
- I'm also sending BIA into Arbhar, which is constantly recording the signal and processing it.
- I also have a recording of the BIA on the Morphagene, and I'm modulating the Gene size and the Slide with more S&H from VCV Rack.
- The Morphagene is going through Magneto for some sweet tape goodness.
- I'm also sending the BIA through the 2HP Freez, and I'm triggering the freeze function with a random trigger from the 1U Noise Tools module, and I also modulate the buffer size with it. This is going to the Microcell for extra granulation.
- I have a piano recorded into the Nebulae, and I'm playing it slower than usual.
- I also have another sample loaded into the Disting, and I'm modulating the speed with yet another S&H from VCV Rack."

KeyKit aka Keynote Ported to 64-bit & Raspberry Pi

See the updated at the bottom of this post for details.

Kawai K5m Digital Additive Synthesizer Module (1987) SN 142634

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Quasimidi Polymorph

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Launched in 1997, it has a maximum of 16 sounds, a 4-part multitimbre, and a German-made virtual analog modeling synthesizer. 2 filter (LPF / HPF), 3 LFO with 2 envelope generators, 16-step sequencer with 8 variations / 4 parts. QUASI MIDI's last product."

CLICK FOR MORE »

ARP Odysseyb 2823

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Waldorf micro Q keyboard

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Fenix II+III Sunday Brunch

Published on May 17, 2020 splitradix

"Live jam with the Fenix II+III. All synth sounds are the Fenix. Kick, clap and hi-hats from the Elektron Rytm. But of reverb and delay near the end. High frequency blips."

Eurorack Beats | Moffenzeef Modular // Noise Engineering // E440 Filter // Bastl // Elektron

Published on May 17, 2020 Nostalgic Ruckus

"Skiff.. u so grimy. 💅
All reverb, delay, and chorus effects are from the Analog Four."

Jason Basson TAPE LOOPS & the Error Instruments Broken Tape Simulator

TAPE LOOPS 4 Published on May 17, 2020 Jason Basson

"I bought me recently a 'broken tape simulator'-effect of Error Instruments. That gave me the idea to make several tape loop-tapes. I have already made 3 videos of Tape Loops so this is Tape Loops n° 4! :-) This effect is capable to do a lot. Check it out!!"

That's some noise, right there. See here for posts and additional details on Error Instruments Broken Tape Simulator.

TAPE LOOPS 5

Published on May 17, 2020 Jason Basson

"In this Tape Loops 5 we let the other 3 tapes I made, run through the Broken Simulator effect. The Korg Monotron Delay loops gave very nice results! Check it all out!"

Making a Super Sketchy TRIPLE Delay/Noise Module - DIY KOSMO TRIPLE SPLASHBACK

Published on May 17, 2020 LOOK MUM NO COMPUTER

"The #2399 Triple Delay #synthesizer #Delay #effect is now out! the seventh module in the 'My synth kept breaking so im making 1 proper module a month' series. Info here :- https://www.lookmumnocomputer.com/pro..."

#2399 Triple Delay

Different Oscillator Saws loaded on Waldorf Quantum

Published on May 17, 2020 Default Corporation

"A friend ask me to compare some oscillator SAWs on my Quantum. I've done a video for him.

Original SAWs are from: Roland Jupiter 8, Oberheim OB-Xa and Sequential Prophet 6.
Thanks for watching"

Rings, Plaits, Sheep algorithms ported to TBD

Published on May 17, 2020 Creative Technologies

"Porting the amazing algorithms of Rings, Plaits and Sheep to TBD. This truly shows the power of open source. Big respect to Dr. Gillet!

CTAG TBD as in 'to be determined' is an open source eurorack audio module. All sounds and effects in this video are CTAG TBD, no extra processing!

It can be easily extended by your own DSP algorithms using a flexible c++ plugin architecture.

It's core feature is control of your plugin parameters through a web application UI and WiFi access. You basically log onto your TBD with a browser, choose your active plugin and modify its parameters. You can store patches per plugin. CTAG TBD recalls the last active plugins and patches upon reboot, so you continue making music where you left off.

All source (hw+sw) are available on https://github.com/ctag-fh-kiel/ctag-tbd

More introductory videos will be available on this channel soon, with specific focus on functionalities and how to add your own code.

If you are interested in beta hardware email contact@instrumentsofthings.com subject 'TBD REQUEST'."

Rarebeasts EmTronic Mini Synth

Published on May 16, 2020 Rarebeasts

"This is the EmTronic mini synth, it's a super simple Arduino powered noise maker that I have designed to be easy to build and only requires easy to buy parts. This little synth allows you to control frequency, modulation and the waveform of the sound.

The Arduino sketch uses the awesome the_synth library from DZLOnline.

The 3d printed front panel finishes off the mini synth but you don't need it to make the sounds. You could even build it on a breadboard if that works for you.

Best of all once you're done it's time to experiment with your own mods to the software to make new crazy sounds and mods to the front panel to really get the look you want.

At some point I will sell few finished EmTronics for those who don't want to make their own so check out my store some time at Rarebeasts.

You can find the EmTronic2020 in my Etsy store here: https://etsy.me/3cHPfg6 or build your own with my Instructable here: https://www.instructables.com/id/EM-T...

Happy noise making

Brian McNamara

Supplies:

Arduino Nano
10k pcb mount vertical pot(RV09)
Tactile push button switch
1/8" audio socket(PJ392)
2.2uF radial capacitor
About 40cn of Wire
3d printed front panel and support arm, you don't need this for it to work but it's fun
Mini-B USB cable"

CLICK FOR MORE »

Coronavirus Synth Dreams

So, anyone else having any coronavirus synth dreams? I had one last night where using pulse width modulation wasn't allowed during the lock down. I was showing someone how to program a synth and we accidentally used PWM. I remember thinking "why is this part of the lock down? we aren't going out in public or anything." We were then in a small classroom with a few other people trying out PWM. It didn't occur to me that even that limited gathering was a risk to exposure. Only the use of PWM was part of the ban, and apparently we we were being naughty. :)