MATRIXSYNTH

Monday, November 06, 2017

SLEDGE - Rush "Subdivisions" Cover


Published on Nov 6, 2017 Adam Borseti

"A while back, I recorded a drum track of Subdivisions by hand (key drumming) and put some faux guitar over it. My intention was to develop it into a full-blown cover, but other things got in the way. I LOVE me some Rush, and "Signals" is my album of theirs, so when people started asking me to program a Subdivisions patch on the Minilogue, I knew there was some interest.

Problem is, while the Minilogue is wonderful, you CANNOT play Subdivisions with 4-voice polyphony; not properly anyway! Now that I've got this Sledge, I decided to finish the cover and upload myself laying on the final track (the main synth comp/pad).

There were some mistakes here and there, but I only did this to show off the awesome patches for it that will be included in the set! So, aside from the drums and guitar, everything else was Sledge. That's the intro 7/8 bit, which I doubled up a few times for a Unison type effect, the choir in the bridges, the Minimoog lead (which you see me quickly trying to switch to while playing) and the comp/pad sound that plays throughout the whole song.

Finally, you may have noticed that I am playing the song in standard F,"

Nailed it.

Moog Opus-3 Vintage 49-Key Analog Synthesizer SN 1450

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"This is an early model Moog Opus 3 synth in very good condition. Serial number is 1450, making this one of the earlier opus 3's made by Moog. Overall cosmetic condition is very good considering age. Comes with all original nobs and faders as well as the power cord. Some scuff marks on the side panels as well as the on the board itself, as seen in the pictures. As far as functionality goes this keyboard works great except for the modulation rate fader, which isn't working. The rest of the modulation section is functioning..."

Access Virus TI Polar 37-key Synthesizer

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

Yamaha VL1-m Version 2 Synthesizer Virtual Acoustic Tone Generator SN KPO1624

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

Modular jam Metropolis, Elektron & Ipad FX (Timeless + EOS)


Published on Nov 3, 2017 Guy Analept

"Intellijel designs Metropolis sequence doepfer VCO going trough an Ipad using Auria with delay from Timeless 2 & reverb from Audio Damage Eos. Rythm is Machine Drum. Monomachine provide bass and FM drums. The Batumi is use to add some randomness to the melody."

Spotted this one on discchord.

Yamaha Genos Sound Demo (no talking)


Published on Nov 6, 2017 Bonedo Synthesizers

"Yamaha Genos Digital Workstation Sound Demo (no talking)"

skinnerbox: the digitakt and the olive tree


Published on Nov 6, 2017 skinnerbox

"shot in the north of israel"

Walkthough of the NKS-ready chipsounds and chipspeech on Komplete Kontrol MK2


Published on Nov 6, 2017 Plogue Art et Technologie, Inc.

"Plogue's flagship chipsounds and chipspeech synthesizers are now available for the Native Instruments Maschine and Komplete Kontrol platforms through the Native Kontrol Standard (NKS)

Every chipsounds preset has been revisited with quick parameter pages.

100 new chipspeech presets have been created JUST for the Komplete Kontrol integration.

Get it at 50% off for a limited time. Use coupon code NKSREADYCHIP50 in checkout.

Try out a free demo here:
https://www.plogue.com/downloads#chip...
https://www.plogue.com/downloads#chip..."

HN VCF all filter modes manual frequency sweeps


Published on Nov 6, 2017 Happy Nerding

"Static oscillator filter sweeps."

horses


Published on Nov 6, 2017 ljs8888

Lufia - Final Battle (Dreadbox NYX Synth Remix)


Published on Nov 6, 2017 RemixSample

"The video is just me filtering and messing with the lead of the song. In this version I used 3 synth parts, lead, bass and arp melody. All sound is generated by the NYX.
Effects are a mix of Valhalla Shimmer and the built in reverb of the NYX. I also used some Soundtoys Echoboy delay."

Haptic Synapses live at Binary Society @ Robotspeak 2017 Synth Meet


Published on Nov 6, 2017 Distortion Productions

"On October 28th, 2017, Silicon Valley's Haptic Synapses (Charles Johnson, Derek Scott & Steve Cooley) performed an epic live modular set for Binary Society in Vinyl Dreams at Robotspeak's Annual Synth Meet commemorating their 15 Year Anniversary in San Francisco. Live visual performance by Bill Wiatroski and Tim Thompson. Available for viewing in UHD 4K. For more info visit hapticsynapses.com and binarysv.com"

Ace Tone (Roland) Rhythm Ace FR-7L 70's Vintage Analog Drum Machine

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

You can find a video here.

Suzuki ME-801 Marching Echo Synthesizer + Roland RE-201 Space Echo test


Published on Nov 5, 2017 SUBTOKYOSHOP

"Suzuki ME-801 Marching Echo Synthesizer + Roland RE-201 Space Echo test"

subtokyoshop on eBay | subtokyoshop on Reverb

Note: eBay and Reverblinks are affiliate links for which the site may be compensated.

"Dark Star 01 MM" Original Preset for Ableton Live 10 Wavetable Synth (beta)


Published on Nov 5, 2017 Mark Mosher

"I'm just getting going with some sound design sessions on Ableton 10 Wavetable synth. Here is an early draft of one of my first patches. Also makes use of the wonderful new Echo device."

Rychard Cooper at PUMP 2017


Published on Nov 5, 2017 Rychard Cooper

"SynthLab presents: Rychard Cooper performing at the Long Beach PUMP Sound & Arts festival. October 20th, 2017."

Sunday, November 05, 2017

Dean Forrest and Adjua from “Back Beat Sound System” create with KORG


Published on Nov 5, 2017 Korg

"This entire song was created using multi-tracked microKORG and MONOLOGUE parts with Ableton. The drum parts were recorded from VOLCA-SAMPLE and VOLCA-KICK direct into Ableton. Vocals by Adjua and Dean Forrest."

Noodling with a Sputnik Dual Oscillator


Published on Nov 5, 2017 Angroc Sound

"Westcoast synthesis is the reason I have decided to plunge into eurorack. Not much so far, but just a single Dual Oscillator can keep me entertained for hours. Such wide sonic capabilities.

Noodling on a very limited setup. No mults or stackable cables. Limited amount of cables to interface with the analog four/cirklon CVIO. Because of this I could only use a single envlope and none of the VCAs from the Gallilean Moons module."

MOOG THE SOURCE 341A SN 3751 w/ Encore MIDI

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"Moog Source with Encore MIDI v4.11
S/N 3751
Working GREAT

Pro serviced in 2017 by Analog Synthesizer Service."

Roland SH-1 Synthesizer SN 690216

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

KOMA Elektronik Field Kit FX | Techniques for Ambient Music


Published on Nov 5, 2017 HAINBACH

"If you have been following my channel you might have seen the outdoors video I made with the KOMA Elektronik Field Kit FX prototype. In this video, I explain the techniques I used and give my opinion on the FKFX."

80s Italo Disco /w Oberheim OB-8, Roland Juno 60, SCI Drumtraks, Lexicon PCM70, SRV2000


Published on Jul 9, 2017 synthtools

"80s Italo Improvisation - no concept :-)

Recorded live on hard driven Studer Revox A77 thru a Soundcraft Delta DLX Desk. No multitrack.

Drums - Sequential Circuits Drumtraks
Bass - Oberheim OB-8
Pad - Oberheim OB-8
Lead - Juno 60
Lead Brass - Juno 60
Small Room - Lexicon PCM 70
Large Room - Lexioon PCM 70
NonLinear - Roland SRV-2000"

Emu Emax II - Proof of working device Soundlibrary Liquid Stack


Published on May 13, 2014 synthtools

"This is the Emu EMAX II - a vintage sampler from the 80s. I comes with 16 Voices and 8 Outputs and has 2MB RAM. Also capable of sampling in stereo.
You hear classic Emu Sounds such as Liquid Stack, Marcato Strings, Orchestra Hits, Choires and so on."

Kawai K4 16bit DIGITAL SYNTHESIZER - High Quality Sound-Demo


Published on Dec 30, 2011 synthtools

"The Kawai K4 Synthesizer was build from 1989 on and was a competitor to the Roland D-50 and the Korg M1. I have chosen several sounds to show what the K4 is capable of."

Anyware Instruments Moodulator - Analogue Synthesizer - High Quality


Published on Nov 5, 2017 synthtools

"You hear the monophonic analogue synthesizer 'Anywhere Instruments Moodulator' and some sound possibilities. Simple loop with some reverb and a little high boost EQ.
Nothing Special - but shows the great basci sound of the Moodulator."

Korg Minilogue + Ohmless Solana demo


Published on Nov 5, 2017 PetrolLimiter

"Drive Warz vol. 3

no further effects or post processing"

MOOG MOTHER32 DRUMS SUB37 BOSS RC-505


Published on Nov 5, 2017 peter synthbrothers

"just short record because i had some imspiration improvisation.
Earlier this day I made drumsound with mother32 and recorded the drumtracks on mother32
1.start boss rc505
2.mother32 and sub37
enjoy"

RC CIRCUIT BENT 'REVENANTS MACHINE' ATMOSPHERIC SOUND GENERATOR DRONE NOISE SYNTHESIZER


Published on Nov 5, 2017 djwidow420

"BESPOKE CREATION FROM RESONANCE CIRCUITS. FOR SALE VIA EBAY."

Resonance Circuits on eBay


via this auction

"The Revenants Machine: The Sound of Lost Souls

A bespoke sound generator capable of producing haunting soundscapes, evolving drones, eeire atmospherics and modulating swells.

Use to conjure otherworld sounds and ghostly echoes.

The body contact modulators and optical sensor allow you to manipulate the soundscapes with articulation and expression - conjuring new evolutions of harrowing sounds and complex waves of modulation.

CONTROLS

on/off power switch

large 'on' indicator lamp

3 x fx mutation controls - manipulate the sound by injecting multiple effects and additional waveforms

3 x 'mutation' indicator leds

master modulator control - this control varies the amount/depth of self oscillation and feedback. from gentle atmospheres, swirling ambient feedback loops to full on demonic possession and spirit voices

optical modulator - manipulate sound by restricting light to the sensor, a new, dynamic way to control modulation - adding multiple layers of rich feedback cascades

optical sensor on/off switch

body contacts - modulation via touch, vary pressure to the body contacts for different sound shaping/shifting results. Use to inject new textures and timbres

output level control

1/4" jack output

powered by 6v DC input (negative centre polarity): any standard, universal AC/DC multi-adapter will be suitable

or via 4 x 'AA' batteries (battery adapter supplied)

Stained and lacquered hardwood case, brass embellishments and vintage inspired control knobs

Dimensions: 6.2(H) X 23.5(W) X 11.5(D)cm- when closed

A one-off creation from Resonance Circuits"

WALDORF MICROWAVE XT

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"It is in very good condition and works great. There are two minor cosmetic issues which do not effect its functioning. There is a scuff mark on the screen, and one of the knobs has a crack in it. See pics for these two minor issues."

Yamaha AN1x CONTROL SYNTHESIZER Analog Modeling Synth

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

Korg Sigma Vintage Analog Mono Synth SN 243283

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

Roland Boutique Minimal Jam (TR-08 & SH-01a)


Published on Nov 5, 2017 Calle Nilsson

"Minimal bassline and drum pattern with the Roland Boutique TR-08 and SH-01a."

Best Ambient Synth Shootout #43: Red Sound Darkstar XP2 - Song 2


Published on Nov 5, 2017 Christian's Sonic Spaces

"This is the second song with the Red Sound Darkstar XP2. It's a table-top 8-voice polyphonic, 5-part multitimbral virtual analog synthesizer.

I used for the recording the following FX chain:
Darkstar XP2 - Sony DPS-V55M - DigiTech Obscura- DigiTech Polara. The used fx varied depending on the recorded track.

The signal goes via a small Behringer mixer straight into the pc.

To create the complete song I recorded consecutively several stereo tracks. The final song was then mastered with just a bit EQ and compression on some tracks and some limiting on the master track."

Song 1 here.

#039 :: Roland Tr-08 // SH-01A // Strymon Dig // Korg Monologue // EXH Cathedral


Published on Nov 5, 2017 hicut cake

"Hicut Cake proudly presents:

Recipe #039

Ingredients:
– Roland Boutique Tr-08
– Roland Boutique SH-01A
– Korg Monologue
– Strymon Dig
– EHX Cathedral"

Soulsby Atmegatron Song - Dungera's Theme


Published on Nov 5, 2017 Oscillator Sink

"I had such a fun time the last time I used the Atmegatron to write a song that I had to go back and have another go! This is a little spooOOookier than the last song (seeing as we've just passed Halloween). I hope you enjoy it!

Everything you hear (including the drums) is coming from the Atmegatron using its 'default' firmware. Very little processing has been applied during mixing - basically nothing more than rolling some bottom end off a few sounds, so it's pretty much Raw Atmegatron you're hearing!

I hope you enjoy it - I had a blast composing and recording it!

The visualisation is done with the excellent "PrettyScope" from SoundMote: https://www.soundemote.com/prettyscop"

An Update on Black Corporation's DECKARD'S DREAM - 2nd Run of Prebuilt Units Pre-Orders Now Open


via Black Corporation

"We hope this newsletter reaches you well. We here at Black Corporation have been working hard to fill all of the orders for the first run of Deckard’s Dream DIY kits and pre-built units. Most of the DIY kits were shipped in mid-October and we are already seeing some enthusiastic builders putting the finishing touches on their projects.

The first run of built Deckard’s Dream units will start shipping this week. We are looking forward to getting them to their new owners and hearing all of the great things they are used for. It has been a major learning experience, but we have managed to streamline some of the process do things more smoothly moving forward. We also had made many software improvements recently, adding extended EG and LFO speeds and microtuning features.

We have been receiving inquiries as to when the second run would be, so we are happy to announce that we are now accepting pre-orders, expecting to ship in February. They will also be $3749, and just as we did in the first run, we will accept preorders with a deposit of $1199 until December 1, 2017 (after which, we will not be able to accept cancellations or refunds). We will then request a final payment of $2550, the balance, when the units are ready to ship. This includes free shipping by Japan Post Priority International.

Please preorder here.

We still have a few DIY kits in stock and will have the full build guide available shortly for those who have been reluctant to emerge into the project.

Unfortunately, these efforts did require us to take some attention away from our upcoming Expander unit, but we are now fully focused on finalizing it.

Stay tuned for more updates,
Black Corporation"

GRP A4 Huge Lead


Published on Nov 5, 2017 coyotesynth

"This huge lead was made with 3 osc playing, with the Eventide Space Stomp FX pedal. GRP A4 is mostly played in a arpeggio context, but can offer everything a mono analog synth can offer, and much more!"

1900h Knobs - Transparent and 'Natural' styles for LED pots


Published on Nov 5, 2017 Thonk Synth DIY

"New knob styles available to buy here - https://www.thonk.co.uk/product-categ..."

Generation XX


Published on Nov 5, 2017 Published on Nov 5, 2017 Miles Briand

Max for Cats - MSE Synthesizer System Trailer


Published on Nov 5, 2017 max forcats

"Release November 9th 2017 via www.sonicbloom.net

Max for Cats crafts Software Instruments, Effects, MIDI devices, Sound Design and Samples for Ableton Live."

04-The Dubreq Stylophone Gen X-1- Envelope


Published on Nov 5, 2017 AutomaticGainsay

"Here is a demonstration of the sound and functionality of the Dubreq Stylophone Gen X-1 envelope."

All parts here.

Roland SH 01A Midi Editor / Controller - VST / Standalone-


Published on Nov 5, 2017 mller30161

"You can buy it on my homepage:
https://sh-01a-midi-editor.jimdo.com

Price: 5,90€

The "SH-01A Midi Controller / Editor". The controller for the Roland Boutique Synth SH-01A.

It is possible as VST and Standalone for PC 32/64 Bit and Mac as VST, AU and Standalone.
The „SH-01A“ parameters can be automated, they can be stored in your Project.
You can safe your sound on the SH-01A Synth or as VST Presets (..fxp) in the DAW.
The editor gives you direct access to the hidden parameters."

Social Entropy Engine - Polyphonic Sequencing


Published on Nov 3, 2015 luss

"Got my Engine this week and i'm realy happy with it! This video just shows the different ways to record a polyphonic sequence into the sequencer.
1. Chord memory per step
2. Realtime recording
3. Programming each pitch per step separate

Drums - Korg Volca Beats
Chords - Roland Juno 106, Strymon Blue Sky"

Yamaha Reface DX & Eventide Space


Published on Nov 5, 2017 3rdStoreyChemist

"Reface DX synthesiser through the Space reverb. Delay and modulation effects are the DX's onboard effects.

No further processing except normalisation."

Buromaschinen | Anticube | An ode to Fez.


Published on Nov 5, 2017 buromaschinen

"It's a rainy sunday so here's a little single pattern homage to one of my favourite games ever, Fez, and it's majestic soundtrack by James Vreeland, aka Disasterpeace.

Monomachine is the main sequencer and synthesizer with 5 leads and one bass, machinedrum takes care of crunchy percussions, analog4 drives the power pads, big sky delivers the biggest sky.

Bonus thunderstorm in the background."

Roland Juno-60 w/ MIDI - Beautiful Condition

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

ROLAND Rhythm Composer TR-808 SN 051888

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

VINTAGE ROLAND CR-78 CompuRhythm Drum Machine SN 842026

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"This is a classic piece of music history! A vintage Roland CR-78 CompuRhythm. This machine is in good working , it has been professionally serviced in the last couple months. Please see the end of listing for details on work done. The machine body is also in good condition- some wear to corners and 1 missing knob. Both details shown in up close pictures.

Service Description:
1. Cleaned up circuit board.
2. Re-capped both main cards as can caps leaking
3. Replaced corroded trigger connector, driver transistors, and resistors as originals were not accepting solder.
4. Wires added to bridge all traces between replacement connector pins and driver signals.
5. Cleaned other connectors and got all sounds to work from both the stored patterns and the programmer
6. Replaced frayed power cable with 3 pin grounded type
7. All functions working."

Roland Jupiter 8 classic vintage analogue poly synth

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

Roland MC-202 MicroComposer, Analog Synth Sequencer SN 340400

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

The blue buttons appear to have gone green. Give it an interesting look.

"Great little analog synth with built in sequencer, it's basically a SH-101 synth but it has a sequencer that can add accent and slide (just like an TB-303).
All pots and sliders work fine with no crackle or problems apart from the square wave slider on the source mixer, the sound doesn't begin to fade in until the slider is moved about 20% of its length. It's not really been a problem for me but I thought it needed to be mentioned.
All keys and buttons work perfectly.
Battery compartment clean.

2 channel Sequencer
Plays both the internal synth and also an external synth via CV and gate out using one channel while at the same time playing a second external synth with a totally different sequence using the external CV and gate outputs.

Tape Save/Load
Even though most users might consider the Tape in/out a bit redundant I think it is very useful as sequences can be saved/loaded using a sampler or audio channel from a DAW instead of tape, just record the data as audio and you can build a library of acid lines to load in seconds.

Sync In/Out
One Roland sync input and two sync outputs will allow the MC-202 to clock from an external device while it sends clock to two other devices

CV/Gate in
Play the internal synth and record realtime sequences using a full size keyboard

CV/Gate Out X 2
Play both Sequencer parts on external synths"

PREVIOUS PAGE NEXT PAGE HOME




© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH